Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FAILURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Yield and Failure Behavior Investigated for Cross-linked Phenolic Resins Using Molecular Dynamics

Molecular dynamics simulations were conducted to fundamentally evaluate the yield and failure behavior of cross-linked phenolic resins at temperatures below the glass transition. Yield stress was investigated at various temperatures, strain rates, and degrees of cross-linking. The onset of non-linear behavior in the cross-linked phenolic structures was caused by localized irreversible molecular rearrangements through the rotation of methylene linkers followed by the formation or annihilation of neighboring hydrogen bonds. The yield stress results, with respect to temperature and strain rate, could be fit by existing models used to describe yield behavior of amorphous glasses. The degree of cross-linking only indirectly influences the maximum yield stress through its influence on the glass transition temperature (Tg), however there is a strong relationship between the degree of cross-linking and the failure mechanism. Low cross-linked samples were able to separate through void formation, whereas the highly cross-linked structures exhibited bond scission.

Stress-strain curves↗
NASA NTRSDate not supplied

OSMA Digital Evolution: R&M Physics of Failure (PoF) Handbook

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of anlayis methodologies to help ensure NASA’s optimize and achieve continued success.

Digital Transformation↗
NASA NTRS2021

Arecibo Observatory Auxiliary M4N Socket Termination Failure Investigation

The NASA Engineering and Safety Center (NESC) was requested to support the Arecibo Observatory failure investigation in determining the root cause of the Auxiliary M4N cable failure. The NESC and Kennedy Space Center led an integrated NASA investigation with support from Marshall Space Flight Center and The Aerospace Corporation that included forensic investigation of failed hardware, finite element modeling, materials characterization, and root cause analysis. This document contains the outcome of the NESC Assessment.

Zinc Spelter Sockets↗
NASA NTRSDate not supplied

OSMA Digital Evolution: R&M Physics of Failure (PoF) Handbook

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of analysis methodologies to help ensure NASA’s optimize and achieve continued success. "

Digital transformation↗
NASA NTRS2024

NASA Methodology for Physics of Failure-Based Reliability Assessments Handbook

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of analysis methodologies to help ensure NASA’s optimize and achieve continued success.

Reliability Engineering↗
NASA NTRSDate not supplied

NASA Physics of Failure (PoF) Handbook Update

At the intersection of mission, technology, and place is NASA’s need to modernize for a digital-forward future. Therefore, NASA’s Reliability & Maintainability (R&M) Enterprise Data Sharing team is working to leverage both Digitization and Digital Transformation to develop and share best practices and methodologies across NASA. One such cutting edge methodology is Physics of Failure. Therefore NASA OSMA's R&M office is developing a Reliability Physics of Failure Handbook in order to keep our engineers current and on the cutting edge of anlayis methodologies to help ensure NASA’s optimize and achieve continued success.

Digital transformation↗
NASA NTRS2024

Failure-Tolerant Avionics for Crewed Space Systems Recommended Best Practices

This paper provides an overview of some of the major steps needed to mature and justify the design of an avionics system for crewed spacecraft. It is organized as a collection of artifacts or pieces of evidence that NASA needs to assess the system at design reviews, including a functional failure modes and effects analysis (FFMEA), fault containment region (FCR) definitions, the failure hypothesis, and reliability analysis. This paper is intended as a reference for designers working on NASA crewed spaceflight projects, reliability engineers responsible for avionics system assessments, and program managers wanting to understand what evidence is required at design reviews to ensure crew safety and mission success.

Avionics↗
DOE OSTI2016

HUMAN FAILURE EVENT DEPENDENCE: WHAT ARE THE LIMITS

Abstract Objectives: This paper discusses the differences between classical human reliability analysis (HRA) dependence and the full spectrum of probabilistic dependence. Positive influence suggests an error increases the likelihood of subsequent errors or success increases the likelihood of subsequent success. Currently the typical method for dependence in HRA implements the Technique for Human Error Rate Prediction (THERP) positive dependence equations. This assumes that the dependence between two human failure events varies at discrete levels between zero and complete dependence (as defined by THERP). Dependence in THERP does not consistently span dependence values between 0 and 1. In contrast, probabilistic dependence employs Bayes Law, and addresses a continuous range of dependence. Methods: Using the laws of probability, complete dependence and maximum positive dependence do not always agree. Maximum dependence is when two events overlap to their fullest amount. Maximum negative dependence is the smallest amount that two events can overlap. When the minimum probability of two events overlapping is less than independence, negative dependence occurs. For example, negative dependence is when an operator fails to actuate Pump A, thereby increasing his or her chance of actuating Pump B. The initial error actually increases the chance of subsequent success. Results: Comparing THERP and probability theory yields different results in certain scenarios; with the latter addressing negative dependence. Given that most human failure events are rare, the minimum overlap is typically 0. And when the second event is smaller than the first event the max dependence is less than 1, as defined by Bayes Law. As such alternative dependence equations are provided along with a look-up table defining the maximum and maximum negative dependence given the probability of two events. Conclusions: THERP dependence has been used ubiquitously for decades, and has provided approximations of the dependencies between two events. Since its inception, computational abilities have increased exponentially, and alternative approaches that follow the laws of probability dependence need to be implemented. These new approaches need to consider negative dependence and identify when THERP output is not appropriate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Common Cause Failure Evaluation of High Safety-significant Safety-related Digital Instrumentation and Control Systems

Digital instrumentation and control (DI&C) systems in nuclear power plants (NPPs) have many advantages over analog systems but also pose different engineering and technical challenges, such as potential threats due to common cause failures (CCFs). This paper proposes a Platform for Risk Assessment of DI&C (PRADIC) developed by Idaho National Laboratory for dealing with potential software CCFs in DI&C systems of NPPs. The methodology development of PRADIC on the quantitative evaluation of software CCFs in high safety-significant safety-related DI&C systems in NPPs is illustrated in this paper. In PRADIC, qualitative hazard analysis and quantitative reliability and consequence analysis are successively implemented to obtain quantitative risk information, compare with respective risk evaluation acceptance criteria, and provide suggestions for risk reduction and design optimization. A comprehensive case study was also performed and documented in this paper. Results show that PRADIC can effectively identify potential digital-based CCFs, estimate their failure probabilities, and evaluate their impacts to system and plant safety.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Dimensionless parameters to categorize the failure modes of ductile plate perforation

In this work, two dimensionless parameters were derived organically from impact mechanics equations to remove the need for empirical constants. These two dimensionless parameters effectively collapse the ballistic performance of ductile metal plates along two distinct loci, depending on the projectile geometry and the corresponding failure mode. Projectiles that initiate ductile hole enlargement via cavity expansion fall along a linear curve, while shear-plugging failure modes tend to fall along a cubic curve. Results were demonstrated for various projectiles of different calibers impacting aluminum and Ti-6Al-4V alloys, and further explored for more complex target combinations. The main advantage of the approach in this work is to drastically reduce the number of features for input into machine learning algorithms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Common Cause Failure Evaluation of High Safety Significant Safety-related Digital Instrumentation and Control Systems using IRADIC Technology

Digital instrumentation and control (DI&C) systems in nuclear power plants (NPPs) have many advantages over analog systems but also pose different engineering and technical challenges, such as potential threats due to common cause failures (CCFs). This paper proposes an integrated risk assessment technology for DI&C systems (IRADIC) developed by Idaho National Laboratory for dealing with potential software CCFs in DI&C systems of NPPs. The methodology development of the IRADIC technology on the quantitative evaluation of software CCFs in high safety-significant safety-related DI&C systems in NPPs is illustrated in this paper. In IRADIC, qualitative hazard analysis and quantitative reliability and consequence analysis are successively implemented to obtain quantitative risk information, compare with respective risk evaluation acceptance criteria, and provide suggestions for risk reduction and design optimization. A comprehensive case study was also performed and documented in this paper. Results show that the IRADIC technology can effectively identify potential digital-based CCFs, estimate their failure probabilities, and evaluate their impacts to system and plant safety.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Studying fuel failure behaviour with a micromechanical approach

Under Loss Of Coolant Accident (LOCA) conditions in light water reactors, the temperature evolution within the fuel pellets combined with a reduction of the cladding confinement can lead to fuel fragmentation. This work focuses on the pellet rim, where bubbles density increases owing to a higher irradiation level. This area, called 'High Burn-up Structure' (HBS), has a specific behaviour due to a microstructure reorganization composed of small grains about 100 nm compared to 10 μm for initial UO{sub 2} fuel. The aim of this study is to define a macroscopic fragmentation model based on a micro mechanical approach to have a better understanding of the fuel mechanical behaviour at lower scale: size and volume fraction of fragments. This paper introduces a stepwise micromechanical method: firstly, we detail how to model the HBS microstructure including pressurized porosities, based on experimental or numerical data and define a Representative Volume Element (RVE). Then we use 3D full field computations in order to determine crack snapshot. Elastic computations are performed to find the bubbles pressure level which is required to reach the cracks initiation threshold. Then nonlinear computations, using a failure local behavior law, are conducted to identify the failure snapshot. The results of these nonlinear computations will be used as an input data of the homogenization ('macroscopic') model. First computations with Full-Fields FEM method give promising results at local scale. Nevertheless, material parameters need to be refined as their experimental values are not perfectly defined yet, leaving an uncertainty in the model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

The root causes of siting failures in nuclear waste management - 15652

For many decades, the global nuclear industry and associated governments have attempted to establish new facilities for the storage and disposal of nuclear wastes. Success has been rare (France, Sweden and Finland being the examples) and remains elusive for many programs despite attempts to change the selection process in some cases. Success has been aided by local and national consent in the few cases that are proceeding. A small study of several countries lack of success is examined to determine the dominant reasons for such failures. The goal of the study is to inform the planning process for efforts to site new facilities by feeding back some lessons learned from past failed efforts. This limited review of international experience indicates that there is no simple approach available for siting deep geologic disposal or even centralized storage facilities. A number of countries have tried multiple times to find an acceptable site. Two studies [1, 2] clearly indicate that there must be adequate assurance of social as well as technical acceptability for successfully siting such facilities. It is evident that even though the technology and science may be proven, it is the politics and public engagement in siting processes that dominate the failures. However, the detailed reasons within each effort present a richer set of lessons. This paper will summarize the findings and present them such that they can be used to inform future siting efforts by a nation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Common Cause Failure Analysis for Nuclear Power Plant Instrumentation and Control Systems

This presentation is prepared for the IAEA Virtual Consultancy Meeting on Preparation of a Coordinated Research Project on Common Cause Failures in Nuclear Power Plant Instrumentation and Control Systems from February 5 ? 8, 2024. It provides an overview of the INL activities on the common cause failure analysis for instrumentation and control system in nuclear power plants.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

ASME – Grappling with the Concept of Component Failure

ASME concepts of component failure. Definition for failure, functionality, damage tolerance, including Magnox reactors and AGRs. How ASME is addressing damage tolerance, and Section III division 5 Design, Classification, Reliability Target for SRC-1 components, Basic analysis approach, simple assessment, and full assessments, Reference to reliability and integrity management and strategy for graphite components.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Why PV Inverter Failures May Lead to AC Power Quality Issues

Case study examines a common PV inverter failure that can drive uncommon issues in the field - namely, damage to the AC protection equipment from DC fault currents for short periods during transformer-less inverter power electronic failures.

14 SOLAR ENERGY↗
DOE OSTI2025

Mitigating Battery Cell Failure: Role of Ag‐Nanoparticle Fillers in Solid Electrolyte Dendrite Suppression

Abstract The development of solid‐state batteries (SSBs) with lithium Li metal anodes holds significant promise for enhancing the energy density and safety of next‐generation energy storage systems. However, their commercialization is hindered by challenges related to Li dendrite formation, which can lead to short circuits and battery failure. In this study, the role of Ag nanoparticles embedded within solid electrolytes (SE) is investigated in suppressing dendrite propagation. The results demonstrate that Ag nanoparticles effectively mitigate two key failure mechanisms: (1) dendrite growth within porous networks at low current densities and (2) stress intensification‐induced SE fracture at higher current densities (12 mA cm −2 ). Ex situ characterization using focused‐ion beam – scanning electron microscopy (FIB–SEM) and energy dispersive X‐ray spectroscopy (EDS,) reveals that Ag nanoparticles migrate alongside advancing Li dendrites, promoting homogeneous dendrite growth and reducing the likelihood of localized stress concentrations. Additionally, the incorporation of Ag nanoparticles is shown to facilitate a more uniform Li distribution toward the anode side, which can potentially enable the use of higher charging rates in SSBs. This study provides a new perspective on Li dendrite suppression and presents new opportunities for enhancing the performance and safety of SSBs.

Diallo, Mouhamad Said↗