Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrostatic Potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Measurement of Secondary Electron Yield from Dielectric Materials

Secondary Electron Yield (SEY) is a material property that plays a fundamental role in material and spacecraft charging. SEY values for dielectric materials (insulators) are crucial inputs to models used to assess mission risk posed by high differential voltages and electrostatic discharge (ESD) on spacecraft. There are only two (non-NASA) facilities that attempt such measurements. The lack of NASA capability results in high cost and long, unpredictable schedules to obtain measurements. Future Artemis crewed lunar surface missions will involve the first use of many insulating materials for which SEY properties are poorly understood or absent entirely. Unconstrained SEY values in models increase uncertainty in charging/ESD risk assessment. The capability for reliable SEY determination will lead to improved charging and ESD risk assessments. We are developing a new capability, using pulsed ultralow (<femtoampere) incident electron beam intensity to eliminate sample charging, coupled with sensitive non-contact surface potential measurements, to measure secondary electron yield (SEY) from insulating materials. Present methods for SEY measurement on insulators suffer from highly inconsistent results due to sample charging from the incident electron beam during the measurement. In this first phase we are leveraging existing EM41 instrumentation, facilities, and expertise to perform proof-of-concept tests.

secondary electron emission↗

Molecular dynamics simulation of hydrodynamic transport coefficients in plasmas

Molecular dynamics simulations are used to calculate transport coefficients in a two-component plasma interacting through a repulsive Coulomb potential. The thermal conductivity, electrical conductivity, electrothermal coefficient, thermoelectric coefficient, and shear viscosity are computed using the Green–Kubo formalism over a broad range of Coulomb coupling strength, 0.01 ≤ Γ ≤ 140. Emphasis is placed on testing standard results of the Chapman–Enskog solution in the weakly coupled regime (Γ ≪ 1) using these first-principles simulations. As expected, the results show good agreement for Γ ≲ 0.1. However, this agreement is only possible if careful attention is paid to the definitions of linear constitutive relations in each of the theoretical models, a point that is often overlooked. For example, the standard Green–Kubo expression for thermal conductivity is a linear combination of thermal conductivity, electrothermal, and thermoelectric coefficients computed in the Chapman–Enskog formalism. Meaningful results for electrical conductivity are obtained over the full range of coupling strengths explored, but it is shown that potential and virial components of the other transport coefficients diverge in the strongly coupled regime (Γ ≫ 1). In this regime, only the kinetic components of the transport coefficients are meaningful for a classical plasma.

Electrical conductivity↗

A co-axial electron gun to generate millimeter-wave RF using the two-stream instability

A novel source for broadband millimeter-wave RF is being designed at Los Alamos National Laboratory utilizing the two-stream instability. This RF source offers the potential for consistent output power over a large bandwidth on a single device. The source is designed to use two co-axial electron beams coupled into solenoidal magnetic fields. This is accomplished using two cathodes independently modulated nested in each other. The electron beam energy from the innermost cathode will fall in the range between 15 and 20 keV with the beam energy from the outer cathode being 75%–95% of the inner beam energy. In order to efficiently match the beam from the outer cathode into the solenoidal magnetic field, shields are used around the cathodes to shape the electric field in the gun region to extend the electrostatic focal length of the beams for better coupling into the magnetic field. As a result, we present the design of electron guns and expected performance using Trak simulations.

47 OTHER INSTRUMENTATION↗

Electric Sail Design Sensitivities

Electric Sails (E-Sails) are a promising propulsion technology that seek to enable high characteristic propellentless acceleration for spacecraft to reach distant and/or difficult to reach orbits such as rapid transit to heliopause. The E-Sail system exchanges momentum by using positively charged electrostatic tethers to repel solar wind photons to push it through space. This concept was first theorized by Pekka Janhunen in 2004 with further developments occurring including a NASA Innovative Advanced Concepts Phase 1 and Phase 2 hosted out of NASA’s Marshall Space Flight Center (MSFC). These developments led to further maturation of the overall system, and this paper is designed to help identify different design sensitivities of an integrated Electric Sail system. To approach this, a small team at MSFC took an in-house developed three degrees of freedom (3DoF) simulation tool and a trajectory modelling tool to look at different design parameters and to determine a potential ideal E-Sail configuration. An E-Sail system has different design architectures including a barbell design, hub and spoke design, and a potential hybrid solution. The barbell design features two equally massed satellites that spin around a central point in the tether system. The hub and spoke design features a large central spacecraft with small end spacecraft to aid in formation control of the overall E-Sail system. Leveraging elements from both the hub and spoke, and barbell design, a hybrid option exists where one could have a larger central mass and one or two tethers extended to a smaller end mass [2]. In summary, the hub and spoke design is the ideal configuration for E-Sail with tethers spanning kilometers to achieve the designed design characteristic acceleration of at least one mm/s2 with this architecture being the focus of this study. Different key design parameters were varied as part of this study. These parameters include the total number of tethers, the length of the tethers, spin rate, relative spacecraft mass, tether voltage, inertia per tether, and impact of slew rate changes. These results started from an internal MSFC technology demonstration mission design and then the parameters were varied with engineering judgement to ensure that the results were consistent with expected results. These were varied in the MSFC 3DoF tool and compared to baseline results to generate a candidate ideal E-Sail design system. These results were then used to help inform the mission analysis design for the system. The 3DoF trajectory optimization was performed in the Astrodynamics and Space Science Enabling Toolbox (ASSET) and utilized collocation optimization of control vector pointing with the objective function being transfer duration. A representative model of the E-Sail force was derived as a function of the Sun-pointing vector direction. This model was initialized with a zero Sun Incidence Angle (SIA) trajectory for the initial guess generation, then with a portion of the mission optimized SIA time history for fast outbound transfers. After the trajectory is hyperbolic relative to a heliocentric frame, the SIA is maintained at 0 degrees except for any needed trajectory correction maneuvers. This trajectory optimization looked at different characteristic acceleration values to analyze the impact it had on mission performance. As a result of this study, the team can best inform mission designers and technology development efforts to mature the E-Sail system. This study will allow mission designers to have defined rules-of-thumb to design an E-Sail system to meet desired mission needs as well as providing several sample mission profiles. These design drivers will inform maturation efforts on which design requirements to consider for an integrated E-Sail design.

E-Sail↗

The Energetic Origins of Pi–Pi Contacts in Proteins

Accurate potential energy models of proteins must describe the many different types of noncovalent interactions that contribute to a protein’s stability and structure. Pi–pi contacts are ubiquitous structural motifs in all proteins, occurring between aromatic and nonaromatic residues and play a nontrivial role in protein folding and in the formation of biomolecular condensates. Guided by a geometric criterion for isolating pi–pi contacts from classical molecular dynamics simulations of proteins, we use quantum mechanical energy decomposition analysis to determine the molecular interactions that stabilize different pi–pi contact motifs. We find that neutral pi–pi interactions in proteins are dominated by Pauli repulsion and London dispersion rather than repulsive quadrupole electrostatics, which is central to the textbook Hunter–Sanders model. This results in a notable lack of variability in the interaction profiles of neutral pi–pi contacts even with extreme changes in the dielectric medium, explaining the prevalence of pi-stacked arrangements in and between proteins. We also find interactions involving pi-containing anions and cations to be extremely malleable, interacting like neutral pi–pi contacts in polar media and like typical ion–pi interactions in nonpolar environments. Like-charged pairs such as arginine–arginine contacts are particularly sensitive to the polarity of their immediate surroundings and exhibit canonical pi–pi stacking behavior only if the interaction is mediated by environmental effects, such as aqueous solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the many-body interactions in a helical Luttinger liquid

In one-dimensional (1D) systems, electronic interactions lead to a breakdown of Fermi liquid theory and the formation of a Tomonaga-Luttinger Liquid (TLL). The strength of its many-body correlations can be quantified by a single dimensionless parameter, the Luttinger parameter K, characterising the competition between the electrons’ kinetic and electrostatic energies. Recently, signatures of a TLL have been reported for the topological edge states of quantum spin Hall (QSH) insulators, strictly 1D electronic structures with linear (Dirac) dispersion and spin-momentum locking. Here we show that the many-body interactions in such helical Luttinger Liquid can be effectively controlled by the edge state’s dielectric environment. This is reflected in a tunability of the Luttinger parameter K, distinct on different edges of the crystal, and extracted to high accuracy from the statistics of tunnelling spectra at tens of tunnelling points. The interplay of topology and many-body correlations in 1D helical systems has been suggested as a potential avenue towards realising non-Abelian parafermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fusion of 12 C+ 24 Mg far below the barrier: Evidence for the hindrance effect

Background: The phenomenon of fusion hindrance may have important consequences on the nuclear processes occurring in astrophysical scenarios, if it is a general behavior of heavy-ion fusion at extreme subbarrier energies, including reactions involving lighter systems, e.g., reactions in the carbon and oxygen burning stages of heavy stars. The hindrance is generally identified by the observation of a maximum of the S-factor vs energy. Whether there is an S-factor maximum at very low energies for systems with a positive fusion Q value is an experimentally challenging question. Purpose: Our aim has been to search for evidence of fusion hindrance in 12 C+ 24 Mg which is a medium-light m system with positive Q value for fusion, besides the heavier cases where hindrance is recognized to be a general phenomenon. 12 C+ 24 Mg is very close to the 16 O + 16 O and 12 C + 12 C systems that are important for the late evolution of heavy stars. Methods: The experiment has been performed in inverse kinematics using the 24 Mg beam from the XTU Tandem accelerator of LNL in the energy range 26-52 MeV with an intensity of 4-8 pnA. The targets were 12 C evaporations 50 mu g/cm 2 thick, isotopically enriched to 99.9%. The fusion-evaporation residues were detected at small angles by a E-Delta E-ToF detector telescope following an electrostatic beam deflector. Results: Previous measurements of fusion cross section for 12 C+ 24 Mg were limited to above-barrier energies. In the present experiment the excitation function has been extended down to similar or equal to 15 mu b and it appears that the S factor develops a clear maximum vs energy, indicating the presence of hindrance. This is the first convincing evidence of an S factor maximum in a medium-light system with a positive fusion Q value. These results have been fitted following a recently suggested method and a detailed analysis within the coupled-channels model that has been performed using a Woods-Saxon potential and including the ground state rotational band of 24 Mg. The coupled-channels calculations give a good account of the data near and above the barrier but overpredict the cross sections at very low energies. Conclusions: The hindrance phenomenon is clearly observed in 12 C+ 24 Mg, and its energy threshold is in reasonable agreement with the systematics observed for several medium-light systems. The fusion cross sections at the hindrance threshold show that the highest value (sigma(s) = 1.6 mb) is indeed found for this system. Therefore it may even be possible to extend the measurements further down in energy to better establish the position of the S-factor maximum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A generative artificial intelligence framework for long-time plasma turbulence simulations

Generative deep learning techniques are employed in a novel framework for the construction of surrogate models capturing the spatiotemporal dynamics of 2D plasma turbulence. The proposed Generative Artificial Intelligence Turbulence (GAIT) framework enables the acceleration of turbulence simulations for long-time transport studies. GAIT leverages a convolutional variational auto-encoder and a recurrent neural network to generate new turbulence data from existing simulations, extending the time horizon of transport studies with minimal computational cost. The application of the GAIT framework to plasma turbulence using the Hasegawa–Wakatani (HW) model is presented, evaluating its performance via various analyses. Very good agreement is found between the GAIT and the HW models in the spatiotemporal Fourier and Proper Orthogonal Decomposition spectra, the flow topology characterized by the Okubo–Weiss parameter, and the time autocorrelation function of turbulent fluctuations. Excellent agreement has also been obtained in the probability distribution function of particle displacements and the effective turbulent diffusivity. In-depth analyses of the latent space of turbulent states, choice of hyperparameters and alternative deep learning models for the time prediction are presented. Our results highlight the potential of Artificial Intelligence-based surrogate models to overcome the computational challenges in turbulence simulation, which can be extended to other situations such as geophysical fluid dynamics.

Artificial intelligence↗

Polarity‐Driven Atomic Displacements at the 2D Mg 2 TiO 4 ‐MgO (001) Oxide Interface for Hosting Potential Interlayer Excitons

Abstract Interlayer excitons in solid‐state systems have emerged as candidates for realizing novel platforms ranging from excitonic transistors and optical qubits to exciton condensates. Interlayer excitons have been discovered in 2D transition metal dichalcogenides, with large exciton binding energies and the ability to form various van der Waals heterostructures. Here, an oxide system consisting of a single unit cell of Mg 2 TiO 4 on MgO (001) is proposed as a platform for hosting interlayer excitons. Using a combination of density functional theory (DFT) calculations, molecular beam epitaxy growth, and in situ crystal truncation rod measurements, it is shown that the Mg 2 TiO 4 ‐MgO interface can be precisely controlled to yield an internal electric field suitable for hosting interlayer excitons. The atoms in the polar Mg 2 TiO 4 layers are observed to be displaced to reduce polarity at the interface with the non‐polar MgO (001) surface. Such polarity‐driven atomic displacements strongly affect electrostatics of the film and the interface, resulting in localization of filled and empty band‐edge states in different layers of the Mg 2 TiO 4 film. The DFT calculations suggest that the electronic structure is favorable for localization of photoexcited electrons in the bottom layer and holes in the top layer, which may bind to form interlayer exciton states.

36 MATERIALS SCIENCE↗

Modeling the electrochemical behavior and interfacial junction profiles of bipolar membranes at solar flux relevant operating current densities

A 1-dimensional, multi-physics model that accounts for the migration and diffusion of solution species, electrostatics, and chemical reactions, in particular water dissociation (WD), at bipolar membrane (BPM) interfaces was developed to study the electrochemical behavior of bipolar membranes (BPMs) at solar flux relevant operating current densities (tens of mA cm -2 ). Significant partial current densities for WD were observed at BPM voltages much less than the equilibrium voltage, e.g., 59 mV × ΔpH from both experiments and modeling. The co-ion leakage across the BPM at pH differentials accounted for the early presence of the partial current density for WD. Two distinctive electric field dependent WD pathways, the un-catalyzed pathway and the catalyzed pathway, were quantitatively and parametrically studied to improve the turn-on potential of the BPM. The catalyzed pathway accounted for the majority of the partial current density for WD at low voltages, while the un-catalyzed pathway dominated the WD at relatively high voltages. Significant WD was observed only within the interfacial CL (<5 nm), in which a large electric field was present. To improve the electrochemical behavior and the turn-on potential of BPMs, the impacts of the pKa of the immobilized WD catalysts, the electric-field dependent rate constant, the thickness of the catalyst layer and fixed charge density in BPMs on the partial current densities for WD were studied systematically. In addition, the electrochemical behavior and concentration profiles of BPMs in a buffered electrolyte were studied and contrasted with those in an un-buffered electrolyte from both modeling and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cu on the passivity of Ti–xCu (x = 0, 3 and 5 wt%) alloy in phosphate-buffered saline solution within the framework of PDM-II

The effect of copper content on the passivity of Ti–xCu alloys in a phosphate-buffered saline electrolyte (pH 7.4), in the steady-state condition, was examined using potentiostatic polarization, electrochemical impedance spectroscopy, and Mott-Schottky analysis. The study demonstrates that the oxide layer forms on the Ti–xCu alloys surface have n-type semiconducting character, and the steady-state thickness of the oxide layer is observed linearly and depends on the applied potential. The study observations are in line with the predictions of the Point Defect Model (PDM-II), which provides a physiochemically realistic description of the oxide layer formation on Ti–xCu alloys. The observations reveal that the Cu additions result in a decrease in the charge transfer resistance and capacitances associated with the hydroxide and barrier layer, an increase in the donor density, and reduce the electrochemical resistance of the Ti–xCu alloys. The study also exhibits that the decrease in the steady-state current density after the initial addition of 3 wt% of Cu is attributed to the progressive substitution of copper on the cation sublattice of the film resulting in enhanced electrostatic interaction between the immobilized copper $Cu^{x'}_{Ti}$, and the mobile cation interstitials $Cu^{+}_{i}$, which carries the excess current over and that conveyed by oxygen vacancies $V^{••}_o$ in the barrier layer. Moreover, it is also observed that over a hundred-year implant period, about 0.006 cm (0.06 mm) of Ti–3Cu alloy is predicted to lose due to steady-state corrosion in the PBS solution under the given set of conditions, it is further seen that, as the Cu amount increased from 3 wt% to 5 wt% in the Ti–xCu alloys, the steady-state corrosion rate decreases.

Electrochemical Impedance Spectroscopy↗

"Dust Devils": Gardening Agents on the Surface of Mars, and Hidden Hazards to Human Exploration?

Dust devils are familiar sites in the and regions of the world: they can produce quite spectacular displays of dust lofting when the vortices scavenge very loose dust from a dry lake bed or from recently disturbed agricultural fields. If one were to arrive at the center of an arid region, take one photograph, or even a series of photographs over a period of several days, then return the images for laboratory analysis, it would be most likely concluded that the region was inactive from an aeolian perspective. No images of general dust movement were obtained, nor were any dust devils "caught on camera" owing to their ephemeral and unpredictable appearance, and the fact that there was deceptively little residue of their actions. If, however, a camera were to take a 360 degree continuous recording over a period of a year, and the film were then to be shown at high speed over a period a several minutes, the impression might be that of a region ravaged by air vorticity and dust movement. Extrapolate this over geological time, and it is possible to visualize dust devils as prime aeolian agents, rather than insignificant vagaries of nature, On Mars, the thin atmosphere permits the surface of the planet to be heated but it does not itself retain heat with the capacity of the earth's atmosphere. This gives rise to greater thermal instability near the surface of Mars as "warm" air pockets diapiritically inject themselves into higher atmospheric layers. Resulting boundary-layer vorticity on Mars might therefore be expected to produce dust devils in abundance, if only seasonally. The spectacular images of dust devils obtained by Pathfinder within its brief functional period on the planet testify to the probability of highly frequent surface vorticity in light of the above reasoning about observational probability. Notably, the Pathfinder devils appeared to be at least a kilometer in height. There are several consequences for the geology of Mars, and for human exploration, if dust devils are to be expected in reasonable abundance. First, from a geological perspective, the vortices will act as "gardening" agents for the top few centimeters of entrainable material. Over time (hundreds of millions, or billions of years being available), they will cover the surface with scouring paths, and the grain sizes that can be lofted by a vortex probably extends over the whole sand to dust range. The depositional paths are, of course, much larger, so that vortex-induced deposition is more widespread than vortex-induced erosion, and will without doubt, affect the whole region in which the dust devils occur (this might explain why rocks at the Viking site seemed oddly capped with dust in a region apparently subject to general aeolian scouring). On Mars, the lift forces in dust devils might be less than on earth owing to the much thinner atmosphere, but this may be counterbalanced by lower gravity and greater vortex velocities. Certainly, when active, other aeolian phenomena on Mars --sand motion and dust storms, seem no less energetic and no less capable of lofting sediments than equivalent terrestrial aeolian phenomena. Every several years, within the current climatic regime, the surface of Mars is subject to light dust fall from global dust storms. Over time, this should develop a very uniform surface layer, with commensurate uniformity in grain size, mineralogy, albedo, color, and general spectroscopic properties. Dust devils will disturb this situation by continually mixing the surface dust with underlying layers, perhaps composed of silt and sand. This size mixing will also involve compositional mixing. After some years, the thin layer of dust that may be difficult to entrain alone, becomes progressively mixed with coarser materials that could reduce the general aeolian threshold of the soil. Certainly the continual disturbance by vorticity will prevent surface stabilization that may bind or indurate grains (caused by slow cementation or ice welding at grain boundaries). If dust devils continually loft dust to kilometer heights, and the dust is sprayed into many cubic kilometers of atmosphere each time, could the devils produce a continual background of atmospheric dust that might be mistaken for the fallout of a distant large-scale dust storm? From a human exploration perspective, dust devils are unlikely to pose any, life- threatening situation for an astronaut unfortunate enough to encounter a momentary swirling cloud of loose soil. However, it is noted that pervasive dust is probably one of the greatest long-term hazards for a human encampment. The fineness and penetration capabilities of the dust, its electrostatic adhesive properties, and its complete ubiquity, render the material a persistent nuisance at best, but at worst, over a period of many months it is possible that space suits, machinery, habitat interiors, air filters, and so forth, could become jeopardized. Owing to dust penetration, the space suits used in the Apollo landings were rendered unusable after a few EVA activities. There will be a definite attempt to situate a human colony on Mars in an area that is far removed from the regions of the planet known for being the centers of major dust storms. At the heart of these storm systems, the dust lofting mechanics are unknown, but they are energetic and perhaps potentially life-threatening for an astronaut. Locating a colony in a region that appears from space to be meteorologically benign may lead to colony placement in a region prone to dust devils, but dust devils are not (or have not been) detectable from orbital observations: the region surveyed for placement will appear like the apparently inactive and area referred to earlier. The region may be spared from highly energetic weather systems, but it may not be necessarily immune from continual dust disturbance. Additional information is contained in the original.

Marshall, J.↗

Laser intensity scaling of the magnetic field from a laser-driven coil target

In this paper, we report on the first direct voltage and current measurements from a laser-generated magnetic field coil target. The magnetic field was observed to scale with the laser intensity as $B ∝ \mathcal{I}^{0.66±0.13}_\text{laser}$. This scaling relation can be derived from the measured voltage approximated by the laser-heated plasma electron temperature $T_e$. The experiments used a 1053 nm laser with pulse lengths ranging from 0.5 to 20 ns and intensities ranging from 10 9 to 10 14 W/cm 2 to generate an electric potential that drives current through the coil. We show that the behavior of the coil can be described with a lumped-element circuit model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constructing Crown Ether-Based Supramolecular Adhesives with Ambient-Temperature Applicable and Durable Adhesion

Supramolecular adhesives are attracting considerable attentions owing to their dynamic and reversible bonding, while the complex curing conditions and poor performance under extreme conditions severely restrict their applicability. Herein, a series of tetra-crown ether-terminated polyethylene glycol (TCE-PEG) adhesives are presented in which plenty of supramolecular interactions, including Van der Waals, hydrogen bonding, π–π staking, metal coordination, and electrostatic ones, provide strong adhesion on multiple types of substrates. Highly relevant for practical applications, ultra-strong adhesivity of TCE-PEG can be achieved without requiring additional ultraviolet radiation, heat, or chemical treatment at ambient temperature. It also exhibits durable adhesive behavior, excellent underwater stability, and low-temperature tolerance. Especially, by incorporating ionic polymer fragments of polyethyleneimine hydrochloride, additional hydrogen bonding between secondary amines and crown ether rings can be induced to enhance the lap-shear strength to 7.21 MPa due to the formation of supramolecular cross-linked network. Finally, this work pioneers a rather unique supramolecular approach for easily formed, ultra-strong crown-ether-based adhesives bearing great potential for applications in critical environments of limited heat source and unallowed solvent usage.

36 MATERIALS SCIENCE↗

Photosynthetic Biohybrid System for Enhanced Abiotic N 2 -to-NH 3 Conversion under Ambient Conditions

Photosynthetic biohybrid systems (PBSs) offer an eco-friendly approach to transforming solar energy into value-added products by integrating biological entities with inorganic semiconductors. However, the chemical conversion capacity of most PBSs has inherent limitations, as whole-cell bacteria and isolated enzymes require fine-tuning of environmental conditions. Here, in this study, we report a new PBS developed by introducing free-standing ceria nanoparticles into the purple membrane (PM) of Halobacterium salinarum archaea, which can unidirectionally transfer charge carriers in response to incident photons, even after separation from living archaea at various conditions. Our microscopy, spectroscopy, and synchrotron X-ray scattering analyses confirm that the electrostatic assembly between ceria and PM creates seamless interfacial contact, thereby enhancing the photocatalytic capacity of ceria. Although the conversion of dinitrogen (N 2 ) to ammonia (NH 3 ) is thermodynamically challenging due to the triple bond in N 2 and a series of charge-transfer reactions, our PM–ceria (PMC) hybrid nanoparticle efficiently produces NH 3 by reducing N 2 using solar energy even under atmospheric pressure and room temperature while simultaneously converting glycerol into value-added derivatives. Additionally, our PMC nanoparticle involves neither toxic/precious metals nor bioengineering processes to achieve enhanced photocatalytic N 2 -to-NH 3 conversion. This study sheds light on the new aspect of PBSs by employing PM to potentially resolve the global energy and environmental challenges posed by the conventional Haber–Bosch process.

Jang, Jinhyeong [Argonne National Laboratory (ANL)↗

Effect of chemical substituents attached to the zwitterion cation on dielectric constant

Materials with high dielectric constant, ε s , are desirable in a wide range of applications including energy storage and actuators. Recently, zwitterionic liquids have been reported to have the largest ε s of any liquid and, thus, have the potential to replace inorganic fillers to modulate the material ε s . Although the large ε s for zwitterionic liquids is attributed to their large molecular dipole, the role of chemical substituents attached to the zwitterion cation on ε s is not fully understood, which is necessary to enhance the performance of soft energy materials. Here, we report the impact of zwitterionic liquid cation chemical substituents on ε s (50 < ε s < 300 at room temperature). Dielectric relaxation spectroscopy reveals that molecular reorientation is the main contributor to the high ε s . The low Kirkwood factor g calculated for zwitterionic liquids (e.g., 0.1–0.2) suggests the tendency for the antiparallel zwitterion dipole alignment expected from the strong electrostatic intermolecular interactions. With octyl cation substituents, the g is decreased due to the formation of hydrophobic-rich domains that restrict molecular reorientation under applied electric fields. In contrast, when zwitterion cations are functionalized with ethylene oxide (EO) segments, g increases due to the EO segments interacting with the cations, allowing more zwitterion rotation in response to the applied field. The reported results suggest that high ε s zwitterionic liquids require a large molecular dipole, compositionally homogeneous liquids (e.g., no aggregation), a maximized zwitterion number density, and a high g, which is achievable by incorporating polar chemical substituents onto the zwitterion cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A plano–convex thick-lens velocity map imaging apparatus for direct, high resolution 3D momentum measurements of photoelectrons with ion time-of-flight coincidence

Since their inception, velocity map imaging (VMI) techniques have received continued interest in their expansion from 2D to 3D momentum measurements through either reconstructive or direct methods. Recently, much work has been devoted to the latter of these by relating electron time-of-flight (TOF) to the third momentum component. The challenge is having a timing resolution sufficient to resolve the structure in the narrow (<10 ns) electron TOF spread. Here, we build upon the work in VMI lens design and 3D VMI measurement by using a plano–convex thick-lens (PCTL) VMI in conjunction with an event-driven camera (TPX3CAM) providing TOF information for high resolution 3D electron momentum measurements. We perform simulations to show that, with the addition of a mesh electrode to the thick-lens geometry, the resulting plano–convex electrostatic field extends the detectable electron cutoff energy range while retaining the high resolution. This design also extends the electron TOF range, allowing for a better momentum resolution along this axis. We experimentally demonstrate these capabilities by examining above-threshold ionization in xenon, where the apparatus is shown to collect electrons of energy up to ∼7 eV with a TOF spread of ∼30 ns, both of which are improved compared to a previous work by factors of ∼1.4 and ∼3.75, respectively. Finally, the PCTL-VMI is equipped with a coincident ion TOF spectrometer, which is shown to effectively extract unique 3D momentum distributions for different ionic species in a gas mixture. These techniques have the potential to lend themselves to more advanced measurements involving systems where the electron momentum distributions possess non-trivial symmetries.

Instruments & Instrumentation↗

Electro-optic transduction in silicon via gigahertz-frequency nanomechanics

Interfacing electronics with optical fiber networks is key to the long-distance transfer of classical and quantum information. Piezo-optomechanical transducers enable such interfaces by using gigahertz-frequency acoustic vibrations as mediators for converting microwave photons to optical photons via the combination of optomechanical and piezoelectric interactions. However, despite successful demonstrations, efficient quantum transduction remains out of reach due to the challenges associated with hybrid material integration and increased loss from piezoelectric materials when operating in the quantum regime. Here, we demonstrate an alternative approach in which we actuate 5-GHz phonons in a conventional silicon-on-insulator platform. In our experiment, microwave photons resonantly drive a phononic crystal oscillator via the electrostatic force realized in a charge-biased narrow-gap capacitor. The mechanical vibrations are subsequently transferred via a phonon waveguide to an optomechanical cavity, where they transform into optical photons in the sideband of a pump laser field. Operating at room temperature and atmospheric pressure, we measure a microwave-to-optical photon conversion efficiency of 1.72±0.14×10 −7 in a 3.3 MHz bandwidth. Our results mark a stepping stone towards quantum transduction with integrated devices made from crystalline silicon, which promise efficient high-bandwidth operation and integration with superconducting qubits. Additionally, the lack of need for piezoelectricity or other intrinsic nonlinearities makes our approach applicable to a wide range of materials for potential applications beyond quantum technologies.

42 ENGINEERING↗