Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Synthesis and room-temperature ferromagnetism of Zn{sub 0.96}Mn{sub 0.04}O/ZnO coaxial nanocable and Zn{sub 0.96}Mn{sub 0.04}O film

Zn{sub 0.96}Mn{sub 0.04}O/ZnO coaxial nanocable and Zn{sub 0.96}Mn{sub 0.04}O film were prepared by two-step method and magnetron sputtering, respectively. The x-ray diffraction analysis reveals that Mn is incorporated well into the wurtzite ZnO without formation of Mn or Mn oxide. The high resolution transmission electron microscopy image and the selected-area electron diffraction pattern demonstrate that both ZnO and Zn{sub 0.96}Mn{sub 0.04}O layers are single crystalline and an epitaxial growth is achieved between Zn{sub 0.96}Mn{sub 0.04}O and ZnO in the coaxial nanocable. The magnetic property measurements show that both Zn{sub 0.96}Mn{sub 0.04}O/ZnO nanocable and Zn{sub 0.96}Mn{sub 0.04}O film are ferromagnetic at room temperature. Moreover, the saturated magnetization and the coercive field of Zn{sub 0.96}Mn{sub 0.04}O/ZnO coaxial nanocable are larger than those of Zn{sub 0.96}Mn{sub 0.04}O film.

36 MATERIALS SCIENCE↗

A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes

We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micrometer probe size, long coherence length, and 200 fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be 7×1013 A/m2 rad2. To generate high brightness electron bunches, the system employs high efficiency, low emittance semiconductor photocathodes driven with a wavelength near the photoemission threshold at a repetition rate up to 250 kHz. We characterize spatial, temporal, and reciprocal space resolution of the apparatus. We perform proof-of-principle measurements of ultrafast heating in single crystal Au samples and compare experimental results with simulations that account for the effects of multiple scattering.

43 PARTICLE ACCELERATORS↗

Optical properties of noble-metal nanoparticles coated with a dye J-aggregate monolayer

We report experimental and theoretical studies of the optical properties of composite nanoparticles consisting of a noble-metal (Ag or Au) core and a cyanine dye J-aggregate shell. Using transmission electron microscopy, the particles have been shown to be spherical in shape and 4 - 10 nm in size. The crystal structure of their core has been determined by 1-keV electron diffraction. The absorption spectra of such nanoparticles in aqueous suspension show two peaks, one dueto the plasmon resonance in the metallic core, and the other to electronic excitations in the J-aggregate shell. These results are interpreted in a model based on the expression for the absorption cross section of small particles, using polarisability calculations for two concentric spheres with allowance for the size effect on the dielectric function of the metallic core. The dielectric function of the J-aggregates is derived from experimental data using Kramers - Kronig relations. The shape and position of the peaks in the absorption spectra of the hybrid nanoparticles are strongly dependent ontheir geometry and the optical properties of the core and shell materials. This offers the possibility of controlling the optical properties of composite materials based on such nanoparticles. (nanostructures)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diffractive Imaging of C 60 Structural Deformations Induced by Intense Femtosecond Midinfrared Laser Fields

Theoretical studies indicated that C 60 exposed to linearly polarized intense infrared pulses undergoes periodic cage structural distortions with typical periods around 100 fs (1 fs = 10 –15 s). Here, we use the laser-driven self-imaging electron diffraction technique, previously developed for atoms and small molecules, to measure laser-induced deformation of C 60 in an intense 3.6 μm laser field. A prolate molecular elongation along the laser polarization axis is determined to be (6.1 ± 1.4)% via both angular- and energy-resolved measurements of electrons that are released, driven back, and diffracted from the molecule within the same laser field. The observed deformation is confirmed by density functional theory simulations of nuclear dynamics on time-dependent adiabatic states and indicates a nonadiabatic excitation of the h g (1) prolate-oblate mode. Here, the results demonstrate the applicability of laser-driven electron diffraction methods for studying macromolecular structural dynamics in four dimensions with atomic time and spatial resolutions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic Grueneisen parameter and thermal expansion in ferromagnetic transition metal

We report the measurement of the electronic Grueneisen parameter {gamma}{sub e} of the ferromagnetic transition metal nickel. In this measurement, the electronic thermal expansion was differentiated from other thermal contributions by simultaneously monitoring the laser-induced ultrafast stress and structural dynamics in the time domain using femtosecond electron diffraction. This method overcomes the restriction of traditional low temperature methods and offers a unique path to study electronic thermal expansion in magnetic metals. The result indicates that the local magnetic moment, which persists in the paramagnetic state of nickel, does not significantly contribute to the thermal expansion.

36 MATERIALS SCIENCE↗

Selective sorption of oxygen and nitrous oxide by an electron donor-incorporated flexible coordination network

Incorporating strong electron donor functionality into flexible coordination networks is intriguing for sorption applications due to a built-in mechanism for electron-withdrawing guests. Here we report a 2D flexible porous coordination network, [Ni 2 (4,4'-bipyridine)(VTTF) 2 ]n(1) (where H 2 VTTF = 2,2;-[1,2-bis(4-benzoic acid)-1,2ethanediylidene]bis-1,3-benzodithiole), which exhibits large structural deformation from the as-synthesized or open phase (1α) into the closed phase (1β) after guest removal, as demonstrated by X-ray and electron diffraction. Interestingly, upon exposure to electron-withdrawing species, 1β reversibly undergoes guest accommodation transitions; 1α$\supset$O 2 (90 K) and 1α$\supset$N 2 O (185 K). Moreover, the 1β phase showed exclusive O 2 sorption over other gases (N 2 , Ar, and CO) at 120 K. The phase transformations between the 1α and 1β phases under these gases were carefully investigated by in-situ X-ray diffraction, in-situ spectroscopic studies, and DFT calculations, validating that the unusual sorption was attributed to the combination of flexible frameworks and VTTF (electron-donor) that induces strong interactions with electron-withdrawing species.

36 MATERIALS SCIENCE↗

Characterization of ZnS thin films synthesized through a non-toxic precursors chemical bath

Highlights: • High quality ZnS thin films have been deposited by chemical bath deposition technique from a non-toxic precursor’s solution. • Nanocrystalline ZnS thin films with large band gap energy were synthesized without using ammonia. • Evidence that the growing of the thin films is carried out by means of hydroxide mechanism was found. • The properties of these ZnS thin films are similar and in some cases better than the corresponding ones produced using toxic precursors such as ammonia. - Abstract: In solar cells, ZnS window layer deposited by chemical bath technique can reach the highest conversion efficiency; however, precursors used in the process normally are materials highly volatile, toxic and harmful to the environment and health (typically ammonia and hydrazine). In this work the characterization of ZnS thin films deposited by chemical bath in a non-toxic alkaline solution is reported. The effect of deposition technique (growth in several times) on the properties of the ZnS thin film was studied. The films exhibited a high percentage of optical transmission (greater than 80%); as the deposition time increased a decreasing in the band gap values from 3.83 eV to 3.71 eV was observed. From chemical analysis, the presence of ZnS and Zn(OH){sub 2} was identified and X-ray diffraction patterns exhibited a clear peak corresponding to ZnS hexagonal phase (1 0 3) plane, which was confirmed by electron diffraction patterns. From morphological studies, compact samples with well-defined particles, low roughness, homogeneous and pinhole-free in the surface were observed. From obtained results, it is evident that deposits of ZnS–CBD using a non-toxic solution are suitable as window layer for TFSC.

36 MATERIALS SCIENCE↗

Structure study of Bi{sub 4}Ti{sub 3}O{sub 12} produced via mechanochemically assisted synthesis

Nanosized bismuth titanate was prepared via high-energy ball milling process through mechanically assisted synthesis directly from their oxide mixture of Bi{sub 2}O{sub 3} and TiO{sub 2}. Only Bi{sub 4}Ti{sub 3}O{sub 12} phase was formed after 3 h of milling time. The excess of 3 wt% Bi{sub 2}O{sub 3} added in the initial mixture before milling does not improve significantly the formation of Bi{sub 4}Ti{sub 3}O{sub 12} phase comparing to stoichiometric mixture. The formed phase was amorphized independently of the milling time. The Rietveld analysis was adopted to determine the crystal structure symmetry, amount of amorphous phase, crystallite size and microstrains. With increasing the milling time from 3 to 12 h, the particle size of formed Bi{sub 4}Ti{sub 3}O{sub 12} did not reduced significantly. That was confirmed by SEM and TEM analysis. The particle size was less than 20 nm and show strong tendency to agglomeration. The electron diffraction pattern indicates that Bi{sub 4}Ti{sub 3}O{sub 12} crystalline powder is embedded in an amorphous phase of bismuth titanate. Phase composition and atom ratio in BIT ceramics were determined by X-ray diffraction and EDS analysis.

36 MATERIALS SCIENCE↗

Synthesis of PbS/poly (vinyl-pyrrolidone) nanocomposite

A simple solution growth method for synthesis of nanocomposite of PbS nanoparticles in poly(vinyl-pyrrolidone) (PVP) polymer is described. The nanocomposite is prepared from methanolic solution of lead acetate (PbAc), thiourea (TU) and PVP at room temperature ({approx}27 deg. C). Optical absorption spectrum of PbS/PVP nanocomposite solution shows strong absorption from 300 to 650 nm with significant bands at 400 and 590 nm which is characteristic of nanoscale PbS. Spin-coated nanocomposite films on glass have an absorption edge at {approx}650 nm with band gap of 2.55 eV. Fourier transform infrared (FTIR) spectroscopy of PbS/PVP nanocomposite and PVP shows strong chemical bond between PbS nanoparticles and host PVP polymer. The transmission electron microscope (TEM) images reveal that 5-10 nm PbS particles are evenly embedded in PVP polymer. The formation of PbS is confirmed by selective area electron diffraction (SAED) of a typical nanoparticle.

36 MATERIALS SCIENCE↗

Structural phase transitions in the relaxor ferroelectric Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18}

The relaxor ferroelectric Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} has been studied by Rietveld refinement of powder neutron diffraction data collected at temperatures of 100, 250 and 400 deg. C. Our refinements are compatible with the 'average' crystal structure of Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} undergoing the phase transition sequence F2mm->I4mm->I4/mmm as a function of increasing temperature, with the latter phase being observed above the known ferroelectric Curie temperature, T{sub m}, and the intermediate phase consistent with a previously observed dielectric anomaly around 207 deg. C. The results are, however, in conflict with both observation of a symmetry lowering (to space group B2eb) in the lowest temperature phase, observed by electron diffraction, and also with electrical property measurements, which suggest both a- and c-axis polarisation up to T{sub m}. Nevertheless, these crystallographic results are consistent with the observation of relaxor behaviour in this material, and underline the importance of considering 'long-range' versus 'local' structural effects in relaxor materials. - Abstract: A powder neutron diffraction study suggests that the relaxor ferroelectric Pb{sub 2}Bi{sub 4}Ti{sub 5}O{sub 18} undergoes the phase transition sequence F2mm-I4mm-I4/mmm with increasing temperature. Display Omitted

36 MATERIALS SCIENCE↗

Visible photoluminescence and room temperature ferromagnetism in high In-content InGaN:Yb nanorods grown by molecular beam epitaxy

We report the growth of high indium content InGaN:Yb nanorods grown on c-plane sapphire (0001) substrates using plasma assisted molecular beam epitaxy. The in situ reflection high energy electron diffraction patterns recorded during and after the growth revealed crystalline nature of the nanorods. The nanorods were examined using electron microscopy and atomic force microscopy. The photoluminescence studies of the nanorods showed the visible emissions. The In composition was calculated from x-ray diffraction, x-ray photoelectron spectroscopy, and the photoluminescence spectroscopy. The In-concentration was obtained from photoluminescence using modified Vegard's law and found to be around 37% for InGaN and 38% for Yb (5 ± 1%)-doped InGaN with a bowing parameter b = 1.01 eV. The Yb-doped InGaN showed significant enhancement in photoluminescence properties compared to the undoped InGaN. The Yb-doped InGaN nanorods demonstrated the shifting of the photoluminescence band at room temperature, reducing luminescence amplitude temperature dependent fluctuation, and significant narrowing of excitonic emission band as compared to the undoped InGaN. The magnetic properties measured by superconducting quantum interference devices reveals room temperature ferromagnetism, which can be explained by the double exchange mechanism and magnetostriction.

36 MATERIALS SCIENCE↗

Growth of epitaxial iron nitride ultrathin film on zinc-blende gallium nitride

The authors report the growth of iron nitride on zinc-blende gallium nitride using molecular beam epitaxy. First, zinc-blende GaN is grown on a magnesium oxide substrate having (001) orientation; second, an ultrathin layer of FeN is grown on top of the GaN layer. In situ reflection high-energy electron diffraction is used to monitor the surface during growth, and a well-defined epitaxial relationship is observed. Cross-sectional transmission electron microscopy is used to reveal the epitaxial continuity at the gallium nitride-iron nitride interface. Surface morphology of the iron nitride, similar to yet different from that of the GaN substrate, can be described as plateau valley. The FeN chemical stoichiometry is probed using both bulk and surface sensitive methods, and the magnetic properties of the sample are revealed.

36 MATERIALS SCIENCE↗

Structural, morphological, optical and magnetic properties of Ag3(2+x)InxNb4-xO11+δ (0.25 ≤ x ≤ 1.0) nanoparticles synthesized by sol–gel method

Highlights: • Novel Ag{sub 3 (2+x)} In{sub x}Nb{sub 4-x}O{sub 11+δ} nanoparticles were synthesized by sol-gel method and studied their optical magnetic properties. • XRD studies confirm the single-phase monoclinic lattice structure with P2/m space group. • Morphology, purity and homogeneity of samples were confirmed by SEM images, EDX and X-ray mapping. • The absorption spectra and tauc plots confirms the semiconductor nature of the samples. • Magnetic studies reveals the ferromagnetic behavior of the samples at room temperature. - Abstract: Herein, we report the structure, morphology, optical and magnetic properties of novel Ag{sub 3 (2+x)} In{sub x}Nb{sub 4-x}O{sub 11+δ} (0.25 ≤ × ≤ 1.0; A1–A4) nanoparticles prepared by sol-gel technique. The samples were studied using X-ray diffraction, electron microscopy, diffuse reflectance spectroscopy, vibrating sample magnetometer, and electron spin resonance. X-ray diffraction studies confirm the formation of monoclinic lattice type with P2/m space group. Purity and homogeneity of the samples were confirmed by X-ray mapping. The semiconductor nature of the samples was identified by optical absorption spectra which indicate an inter-band transition from the oxygen 2p to niobium 4d electronic states. The magnetization plots reveal the room temperature ferromagnetic behavior of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Augmented photocatalytic activity and luminescence response of Tb³⁺ doped nanoscale titania systems

The present work reports on the effect of Tb³⁺ doping on the luminescence and photocatalytic performance of nano-structured titania derived through a sol-gel route. X-ray diffraction patterns have revealed the existence of anatase phase with and without Tb³⁺ doping and with an improved orientation factor along (004) and (200) planes. Transmission electron microscopy and selective area electron diffraction studies, while exhibiting ample poly-crystallinity feature, have predicted an average particle size of ~9 nm and ~6 nm for the un-doped and 5% Tb³⁺ doped nano-titania samples; respectively. Apart from emissions accompanied by different types of defects, Tb³⁺ related transitions, such as, ⁵D₃ → ⁷F₅, ⁵D₃ → ⁷F₄, and ⁵D₄ → ⁷F₆ were identified in the photoluminescence spectra. Brunauer-Emmett-Teller surface area analysis, as carried out on a Tb³⁺ doped nano-titania system, has demonstrated a more-open hysteretic loop owing to significant difference of N₂ adsorption/desorption rates. The photocatalytic activity of nano-titania, as evaluated from the nature of degradation of methyl orange under UV illumination, exhibited the highest efficiency for a Tb³⁺ doping level of 2.5%. The augmented photocatalytic degradation has also been discussed in the light of a model based on pseudo first-order kinetics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparative SEM and TEM analyses of apatite phases prepared by a multi-sample loading device

Highlights: • A multi-sample loading device which ultrasonically disperses samples was developed. • Comparative EM analyses on various apatite phases were efficiently carried out. • SEM-EDS data revealed distinctive values of O/P and Ca/P intensity ratios. • TEM-SAED data presented characteristic structural features of apatite phases. • Lattice parameters of bone and fossil apatite were affected by CO{sub 3} content. - Abstract: Comparative chemical and structural characterization of various apatite phases from both synthetic and natural sources were carried out by utilizing a multi-sample loading device developed for scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. The device is capable of spraying nanoparticles via ultrasonication, and four separate samples were loaded on a single TEM grid by a masking tool to characterize different apatite phases in consistent instrumental and analytical conditions. SEM energy dispersive spectroscopy (EDS) analysis of the apatite samples revealed distinctive values of O/P and Ca/P intensity ratios except for the fossil apatite due to its high proportion of externally originating phases. Selected area electron diffraction (SAED) pattern analysis presented the characteristic lattice parameters of the apatite phases, especially the bone and fossil apatite which had CO{sub 3}in their chemistry. Analyzing distinctive chemical and structural features among varied apatite phases can be efficiently carried out through electron microscopy with multiple samples on a single TEM grid, and such methods can be employed for characterizing a wider range of materials.

36 MATERIALS SCIENCE↗

Fe/Si(001) Ferromagnetic Layers: Reactivity, Local Atomic Structure and Magnetism

Ultrathin ferromagnetic Fe layers on Si(001) have recently been synthesized using the molecular beam epitaxy (MBE) technique, and their structural and magnetic properties, as well as their interface reactivity have been investigated. The study was undertaken as function of the amount of Fe deposited and of substrate temperature. The interface reactivity was characterized by Auger electron spectroscopy (AES). The surface structure was characterized by low-energy electron diffraction (LEED). The magnetism was investigated by magneto-optical Kerr effect (MOKE). A higher deposition temperature stabilizes a better surface ordering, but it also enhances Fe and Si interdiffusion and it therefore decreases the magnetism. Despite the rapid disappearance of the long range order with Fe deposition at room temperature, the material exhibits a significant uniaxial in-plane magnetic anisotropy. For the Fe deposition performed at high temperature (500 deg. C), a weak ferromagnetism is still observed, with saturation magnetization of about 10% of the value obtained previously. MOKE studies allowed inferring the main properties of the distinct formed layers.

36 MATERIALS SCIENCE↗

Tailoring a 3D Covalent Organic Framework Toward Facile Functionalization

Three-dimensional covalent organic frameworks (3D COFs) are notably crystalline and stable, but their architectures and monomer structures make them difficult to functionalize. Here, a new strategy is presented to render COF-300 and other imine-linked frameworks amenable to facile functionalization in the last step of synthesis. By reducing the imine linkages to secondary amines and appending them with acetyl halide groups, the linkages are converted to electrophiles that can be readily reacted with nucleophilic guests. This route yields eight new COF-300 derivatives, bearing chloroacetyl, bromoacetyl, azide, cyano, amino, hydroxyl, methoxy, or thiomethyl groups appended to the inter-monomer linkages. The new materials are characterized through solid-state NMR, infrared spectroscopy, and powder X-ray diffraction, among other techniques, finding that the reported linkage transformations proceed to complete conversion while retaining the crystallinity of the materials. Microcrystal electron diffraction (microED) data are used to solve the evacuated structure of the amine-linked framework COF-300-AR for the first time, providing conclusive evidence of this framework's guest-induced phase change, along with the structure of the new framework COF-300-NH 2 . Finally, COF-300-NH 2 is shown to have significantly improved adsorption capacity for CO 2 and perfluoroalkyl substances (PFAS), highlighting the benefits of this synthetic strategy for the generation of customized adsorbents.

COF-300↗