SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The question I am examining in this article is whether the value of the speed of electromagnetic and gravitational waves is a fundamental constant of nature or whether it can be derived from theory.
The increasing interest in studying feeder-level, inverter-based microgrids requires appropriate simulation methods that can effectively simulate the dynamics of distribution feeders that typically have thousands of nodes. To examine the accuracy of phasor-based simulation for the stability of feeder-level, inverter-based microgrids, a comparative study between electromagnetic transient (EMT) and phasor-based simulation was conducted. Case studies of a two-inverter small microgrid and a modified version of the IEEE 34-Node Test System that has seven grid-forming inverters show that phasor-based simulation agrees well with EMT simulation when the P-f droop gains of grid-forming inverter controllers are within normal ranges. However, under extremely high P-f droop gains, phasor-based simulation can result in over-optimistic stability results. This study provides insight into the applicability of phasor-based simulation for the stability of feeder-level, inverter-based microgrids.
A micro fabricated electromagnetic device and method for fabricating its component structures, the device having a layered magnetic core of a potentially unlimited number of alternating insulating and magnetic layers depending upon application, physical property and performance characteristic requirements for the device. Methods for fabricating the high performing device permit cost effective, high production rates of the device and its component structures without any degradation in device performance resulting from component layering.
This report proposes a generic model specification of a photovoltaic inverter applied in transmission-connected plants for implementation in an electromagnetic transients simulator. The model specification contains the necessary control loops to meet the fault ride-through performance requirements in the IEEE 2800-2022 standard. The report details the implementation and example parameterization of the model in PSCAD™. Simulation results verify the model meets the performance requirements. Comparisons of the model’s response to laboratory test measurements of a commercial 2.2 MVA storage inverter show the model can reasonably predict the response of commercial equipment.
An electromagnetic propulsion system comprises a plurality of stator coils wound about a first axis, a plurality of support structures, a coupler that surrounds a portion of the stator coils, and a plurality of rotor coils wound about an axis that is parallel to the first axis. The stator coils are configured to receive electric current to induce a first magnetic field. The support structures support the stator coils. The coupler includes a notch oriented so that one of the support structures can pass through the notch when the coupler moves along the stator coils. The rotor coils are attached to the coupler and are configured to receive electric current to induce a magnetic field that interacts with the first magnetic field so that a magnetic force is applied to the rotor coils, thereby propelling the coupler and the rotor coils along the stator coils.
Nanocomposites in accordance with many embodiments of the invention can be capable of converting electromagnetic radiation to an electric signal, such as signals in the form of current or voltage. In some embodiments, metallic nanostructures are integrated with graphene material to form a metallo-graphene nanocomposite. Graphene is a material that has been explored for broadband and ultrafast photodetection applications because of its distinct optical and electronic characteristics. However, the low optical absorption and the short carrier lifetime of graphene can limit its use in many applications. Nanocomposites in accordance with various embodiments of the invention integrates metallic nanostructures, such as (but not limited to) plasmonic nanoantennas and metallic nanoparticles, with a graphene-based material to form metallo-graphene nanostructures that can offer high responsivity, ultrafast temporal responses, and broadband operation in a variety of optoelectronic applications.
We discuss application of newly developed formalism of virtuality distributions to pion-photon transition form factor and pion electromagnetic form factor.
An electromagnetic propulsion system is provided. The system comprises first and second pluralities of stator coils wound about first and second axes, a plurality of support structures, first and second couplers that surround portions of the first and second pluralities of stator coils, and first and second pluralities of sets of rotor coils wound about axes that are parallel to the first and second axes. The stator coils are configured to receive electric current through an outside controller selecting appropriately coupled stator sections or through a sliding electrical contact system or bearing system to induce at least a first magnetic field. The plurality of support structures supports the first and second plurality of stator coils. The first and second couplers include notches and are oriented so that their notches pass over the plurality of support structures when the couplers move along the stator coils. The couplers may have an adjustable segment to close the notch. The sets of rotor coils are equidistantly attached to the couplers and are configured to receive electric current to induce magnetic fields that interact with the magnetic fields of the stator coils so that magnetic forces are applied to the plurality of rotor coils, thereby propelling the couplers along the stator coils.
An electromagnetic propulsion system is provided. The system comprises first and second pluralities of stator coils wound about first and second axes, a plurality of support structures, first and second couplers that surround portions of the first and second pluralities of stator coils, and first and second pluralities of sets of rotor coils wound about axes that are parallel to the first and second axes. The stator coils are configured to receive electric current through an outside controller selecting appropriately coupled stator sections or through a sliding electrical contact system or bearing system to induce at least a first magnetic field. The plurality of support structures supports the first and second plurality of stator coils. The first and second couplers include notches and are oriented so that their notches pass over the plurality of support structures when the couplers move along the stator coils. The couplers may have an adjustable segment to close the notch. The sets of rotor coils are equidistantly attached to the couplers and are configured to receive electric current to induce magnetic fields that interact with the magnetic fields of the stator coils so that magnetic forces are applied to the plurality of rotor coils, thereby propelling the couplers along the stator coils.
Electromagnetic Compatibility (EMC) is a growing field in nuclear equipment qualification. Previously confined to I and C equipment residing in control and cable spreading rooms, EMC qualification has expanded to include the inverters and battery chargers which often power safety-related I and C equipment, as well as adjustable speed drives and material handling equipment which could potentially affect sensitive safety-related I and C systems. Because much of the data collected to form the current EMC limits and guidance was collected from low-power equipment in relatively low EMI environments, the same guidance, applied to power electronic equipment, produces overly conservative estimations of the performance needed for EMC. Excessive modification in an attempt to bring the equipment into compliance with EMC limits may not be necessary. This paper provides a brief summary of current applicable EMC guidance and demonstrates a road map for the qualification of larger, more powerful devices which takes into account the entire EMC process, including design, testing, mapping of the installed location, and justification of EMC failures with the end goal being successful, timely, and cost-effective implementation of upgrades and compatibility with existing plant infrastructure (in the intended installation environment), even if equipment exceeds traditional operating envelopes. (authors)
Wireless sensors could play a significant role in safety, efficiency, and reliability of instrumentation and control process in current and next generation nuclear power reactors. While conventional narrowband wireless sensors have successfully been used in numerous industrial applications, the RF propagation challenges posed by the heavy metallic and cluttered environment of Nuclear Power Plants (NPPs) has prevented their use in such operations. These challenges include: RF propagation in harsh (reflective, absorptive, cluttered) environments, data security issues, and RF interference to and from other devices in a nuclear reactor. In this introductory paper, first we address how Ultra-wideband (UWB) technology can provide a viable solution for the signal propagation issues in such electromagnetically harsh environments. Second, we present a novel UWB remote powering scheme that allows for battery-free operation of sensors to increase their lifetime. We finalize the paper by presenting the experimental results of using UWB signaling in a representative harsh environment conducted at MIT research reactor. We plan to address the security issues through an innovative UWB communications scheme for sensor data communications in a subsequent paper. (authors)
An inverter-based resource (IBR) is a source of electricity that is asynchronously connected to the electrical grid via an electronic power converter. These power sources lack the intrinsic behaviors of the standard power plants, presenting specific challenges to system stability. These power sources lack the intrinsic behaviors of the standards power plants and their features are almost entirely defined by the control strategy used on them, presenting specific challenges to system stability as their penetration increases into the already fragile Bulk Power System (BPS). Utilizing renewable energy has a great upside but the electrical industry needs to understand the requirements like performing electromagnetic transient (EMT) simulation studies in planning and/or in interconnection studies. This paper presents the development of a high-fidelity EMT model based on commercial equipment and field parameters, which at the same time aims to study the increasing penetration of IBRs and their impact on the actual BPS. The open-source EMT model developed will be a benchmarking example that can be used to evaluate algorithms in the power grid (including evaluating grid-forming controls, power system monitoring and operation, etc.).
This paper investigates the key parameters that contribute to electromagnetic (EM) energy absorption and heating of hydride materials which could be used to release hydrogen for use as a fuel. Our simulation study using COMSOL focuses on EM energy absorption and resulting temperature rise in a thin circular slab of hydride material using resonant dipole and loop antennas. Presented results delineate the effects of conductivity, relative permeability, antenna type and slab size on temperature rise when the distance and amount of RF power are kept fixed.
This thesis reports a study of the prospects of using calorimetry for separating photon- from electron-initiated electromagnetic (EM) showers in liquid argon time projection chambers (LArTPCs), a prevalent need for neutrino oscillation experiments based on the LArTPC technology as $\gamma$-initiated showers are a significant background to electron neutrino ($\nu_e$) events, whose signature is electron showers. From events simulated in the LArIAT (Liquid Argon In A Testbeam) experiment's detector, we quantitatively evaluated the dependence of the calorimetric separation on the initial momentum and position (along the beamline) of the primary particle. We could conclude that the separation is more efficient if the primary particle is created inside the chamber, whereas the impact of the momentum is not as significant. Furthermore, a first step was taken towards applying the calorimetric method to the showers measured in LArIAT. A convolutional neural network (CNN) trained on simulation was deployed to find EM showers among the events collected by the experiment. The charge deposition at the beginning of the showers found is centered at a plausible value, although the width of the distribution demands further inquiry.
Motivated by the quantum description of gauge theories, we study the cosmological effects of relaxing the Hamiltonian and momentum constraints in general relativity and Gauss' law in electromagnetism. We show that the unconstrained theories have new source terms that mimic a pressureless dust and a charge density that only follows geodesics. The source terms may be the simplest explanation for dark matter and generically predict a charged component. We comment that discovery of such terms would rule out inflation and be a direct probe of the initial conditions of the universe.
This article presents a generic and multi-functional electromagnetic transient (EMT) dynamic model of grid following (GFL) inverter-based resource (IBR) using the PSCAD TM software platform. The features of the developed model includes the flexibility in selecting various types and combinations of DC sources covering PV modules, battery modules, ideal DC source module, as well as flexibility in selecting either switched or averaged model of inverter. This model also covers exhaustive lists of controller logic covering open-loop/closed-loop PQ dispatch control, DC voltage and AC terminal voltage control along with the conventional current control designed in dq-domain, aB- domain and positive-negative sequence domain. Moreover, this model is equipped with the flexibility in selecting various types of current limiting schemes that includes saturation-based as well as latching-based current limiter, anti-windup protection. Moreover, the EMT model is agnostic to the MVA rating and is suitable for interfacing transmission systems by being complaint with the IEEE Std. 2800. The generality in the power circuits and the multi-functional options in operation and control of the developed EMT model makes it suitable for both academia and industry to study various power system aspects not limited to but such as fault behavior of GFL IBR and impacts on protection system, transient stability of a system interfaced with large number of GFL IBRs etc.
Book written by Mary O'Neill on electromagnetic theory for practical applications - for use by students of the author and future NNSS employees in the author's field.
Book written by Mary O'Neill on electromagnetic theory for practical applications for use by students of the author and future NNSS employees in author's field.