Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Dynamic PIC-simulations of charging phenomena related to the ICE-spacecraft in both cometary and solar wind environments

Spacecraft charging phenomena in the cometary environment of Giacobini-Zinner are less dramatic than expected. The potential of the ICE-probe is less than +1V in the vicinity of Giacobini-Zinner, while the potential may rise up to +6V in the solar wind environment. The paper presents results of PIC simulations that show the dominant influence of photoemission (photoelectrons or impact-induced electrons) in the presence of the solar wind core and halo electrons. Secondary electrons are also important in the cometary environment to explain positive potentials.

Thiemann, H.↗
NASA NTRS1991

Elevation control system model for the DSS 13 antenna

In order to meet the requirements for precision pointing of 34-m antennas, adequate control design and simulation software have to be developed along with a detailed description of the supporting analytical tools. This article describes a control system model for the elevation drive of the DSS 13 antenna. The model allows one to simulate elevation dynamics, cross-coupled dynamics in azimuth and elevation, and RF pointing error. A modal state-space model of the antenna structure was obtained from its finite-element model with a free rotating tipping structure. Model reduction techniques were applied separately for the antenna model and rate-loop model, thereby reducing the system order to one-third of the original one while preserving its dynamic properties. Extensive simulation results illustrate properties of the model.

Gawronski, W.↗
NASA NTRS2005

Stirling Convertor System Dynamic Model Developed

Free-piston Stirling convertors are being developed for potential use on NASA exploration missions. In support of this effort, the NASA Glenn Research Center has developed the Stirling convertor System Dynamic Model (SDM). The SDM models the Stirling cycle thermodynamics; heat flow; gas, mechanical, and mounting dynamics; the linear alternator; and the controller. The SDM s scope extends from the thermal energy input to thermal, mechanical, and electrical energy output, allowing one to study complex system interactions among subsystems. Thermal, mechanical, fluid, magnetic, and electrical subsystems can be studied in one model. The SDM is a nonlinear time-domain model containing sub-cycle dynamics, which simulates transient and dynamic phenomena that other models cannot. The entire range of convertor operation is modeled, from startup to full-power conditions.

Lewandowski, Edward J.↗
NASA NTRS2012

Flight Dynamics Modeling and Simulation of a Damaged Transport Aircraft

A study was undertaken at NASA Langley Research Center to establish, demonstrate, and apply methodology for modeling and implementing the aerodynamic effects of MANPADS damage to a transport aircraft into real-time flight simulation, and to demonstrate a preliminary capability of using such a simulation to conduct an assessment of aircraft survivability. Key findings from this study include: superpositioning of incremental aerodynamic characteristics to the baseline simulation aerodynamic model proved to be a simple and effective way of modeling damage effects; the primary effect of wing damage rolling moment asymmetry may limit minimum airspeed for adequate controllability, but this can be mitigated by the use of sideslip; combined effects of aerodynamics, control degradation, and thrust loss can result in significantly degraded controllability for a safe landing; and high landing speeds may be required to maintain adequate control if large excursions from the nominal approach path are allowed, but high-gain pilot control during landing can mitigate this risk.

Shah, Gautam H.↗
NASA NTRSDate not supplied

Oscillations of the Atmospheric Dynamic State in Simulations of LP 890-9 c

Through the identification and characterization of exoplanet atmospheres, we will soon begin to truly understand the evolution and habitability of extrasolar terrestrial planets. Due to their long main-sequence lifetimes and relatively low luminosities, planets orbiting M dwarf stars are the focus of these searches. Delrez et al. (2022) identified a planet, LP 890-9 c orbiting a faint M6 star. Both LP 890-9 c and the inner planet LP 890-9 b are likely rocky, with radii of ≈ 1.3R Ꚛ . Planet b is well inward of the classical habitable zone (HZ), although LP 890-9 c has an instellation of 0.906 S Ꚛ –placing it near the inner edge of the HZ. Our limited understanding of the co-evolution of rocky planets and M dwarf host stars make LP 890-9 c an ideal subject to test the possible climatic outcomes for the inner edge of the HZ such stars.

LP 890-9 c↗
NASA NTRS1987

Development of response models for the Earth Radiation Budget Experiment (ERBE) sensors. Part 1: Dynamic models and computer simulations for the ERBE nonscanner, scanner and solar monitor sensors

Dynamic models and computer simulations were developed for the radiometric sensors utilized in the Earth Radiation Budget Experiment (ERBE). The models were developed to understand performance, improve measurement accuracy by updating model parameters and provide the constants needed for the count conversion algorithms. Model simulations were compared with the sensor's actual responses demonstrated in the ground and inflight calibrations. The models consider thermal and radiative exchange effects, surface specularity, spectral dependence of a filter, radiative interactions among an enclosure's nodes, partial specular and diffuse enclosure surface characteristics and steady-state and transient sensor responses. Relatively few sensor nodes were chosen for the models since there is an accuracy tradeoff between increasing the number of nodes and approximating parameters such as the sensor's size, material properties, geometry, and enclosure surface characteristics. Given that the temperature gradients within a node and between nodes are small enough, approximating with only a few nodes does not jeopardize the accuracy required to perform the parameter estimates and error analyses.

Halyo, Nesim↗
NASA NTRS1997

Development of a Model Based Technique for Gear Diagnostics using the Wigner-Ville method

Imperfections in gear tooth geometry often result from errors in the manufacturing process or excessive material wear during operation. Such faults in the gear tooth geometry can result in large vibrations in the transmission system, and, in some cases, may lead to early failure of the gear transmission system. This report presents the study of the effects of imperfection in gear tooth geometry on the dynamic characteristics of a gear transmission system. The faults in the gear tooth geometry are modeled numerically as the deviation of the tooth profile from its original involute geometry. The changes in gear mesh stiffness due to various profile and pattern variations are evaluated numerically. The resulting changes in the mesh stiffness are incorporated into a computer code to simulate the dynamics of the gear transmission system. A parametric study is performed to examine the sensitivity of gear tooth geometry imperfections on the vibration of a gear transmission system. The parameters variations in this study consist of the magnitude of the imperfection, the pattern of the profile variation, and the total number of teeth affected. Numerical results from the dynamic simulations are examined in both the time and the frequency domains. A joint time-frequency analysis procedure using the Wigner-Ville Distribution is also introduced to identify the location of the damaged tooth from the vibration signature. Numerical simulations of the system dynamics with gear faults were compared to experimental results. An optimal tracker was introduced to quantify the level of damage in the gear mesh system. Conclusions are drawn from the results of this numerical study.

Choy, F.↗
NASA NTRS1977

Computer simulations of planetary accretion dynamics - Sensitivity to initial conditions

A computer simulation program which generates mature planetary systems using only Newtonian physics and accretion with unit sticking efficiency is examined. The dependence of the simulation on a variety of radial and vertical density distribution laws, on the ratio of gas to dust in the solar nebula, on the total nebular mass, and on the orbital eccentricity of the accreting grains is explored. To approach physically realistic models, these parameters are altered according to various empirically- and theoretically-suggested criteria. The program is found to generate many recognizable planetary systems, including multiple-star systems with accompanying planets; single stars surrounded only by asteroids; and systems with large Jovian planets, planets similar to Pluto, or objects of asteroidal mass, as well as the usual terrestrial planets. Planetary spacing in the simulation obeys a relation of the Titius Bode variety; in general, the number of planets per system is inversely proportional to the orbital eccentricity. Some reservations about the simulation program are expressed; however, it does support the idea of abundant and diverse planetary systems throughout the galaxy.

Isaacman, R.↗
NASA NTRS2008

Three-Dimensional Signatures of Intermittent Magnetic Reconnection in Global Simulations of Dayside Magnetosphere Dynamics

We performed high resolution global MHD simulations of THEMIS dayside crossings events in May -June 2007. We found that magnetopause surface is not in steady-state even during extended periods of steady solar wind conditions. The so-called tilted reconnection lines become unstable due to formation of pressure bubbles, strong core field flux tubes, vortices, and traveling magnetic field cavities. The topology of FTEs differ from that in two dimension cartoons representing obliquely oriented quasi-2D flux rope. The structure of FTE is changing at spatial scales of 1 -2 Re. Closely located space probes can observe completely different signatures. Branches of bent flux rope can move in opposite directions. THEMIS and Cluster observations are consistent with signatures predicted by simulations.

Kuznetsova, M.M.↗
NASA NTRS1993

Simulation of the assembly dynamics and control of Space Station Freedom

A large-angle, flexible, multi-body, dynamic modelling capability has been developed to help validate numerical simulations of the dynamic motion and control forces which occur during berthing of Space Station Freedom to the Shuttle Orbiter in the early assembly flights. This paper outlines the dynamics and control of the Station, the attached Shuttle Remote Manipulator System, and the Orbiter. The simulation tool developed for the analysis is described and the results of two simulations are presented. The first is a simulated maneuver from a gravity-gradient attitude to a torque equilibrium attitude using the Station reaction control jets. The second simulation is the berthing of the Station to the Orbiter with the Station control moment gyros actively maintaining an estimated torque equilibrium attitude. The influence of the elastic dynamic behavior of the Station and of the Remote Manipulator System on the attitude control of the Station/Orbiter system during each maneuver was investigated. The flexibility of the Station and the arm were found to have only a minor influence on the attitude control of the system during the maneuvers.

Cooper, Paul A.↗
NASA NTRS1989

Simulation studies using multibody dynamics code DART

DART is a multibody dynamics code developed by Photon Research Associates for the Air Force Astronautics Laboratory (AFAL). The code is intended primarily to simulate the dynamics of large space structures, particularly during the deployment phase of their missions. DART integrates nonlinear equations of motion numerically. The number of bodies in the system being simulated is arbitrary. The bodies' interconnection joints can have an arbitrary number of degrees of freedom between 0 and 6. Motions across the joints can be large. Provision for simulating on-board control systems is provided. Conservation of energy and momentum, when applicable, are used to evaluate DART's performance. After a brief description of DART, studies made to test the program prior to its delivery to AFAL are described. The first is a large angle reorientating of a flexible spacecraft consisting of a rigid central hub and four flexible booms. Reorientation was accomplished by a single-cycle sine wave shape torque input. In the second study, an appendage, mounted on a spacecraft, was slewed through a large angle. Four closed-loop control systems provided control of this appendage and of the spacecraft's attitude. The third study simulated the deployment of the rim of a bicycle wheel configuration large space structure. This system contained 18 bodies. An interesting and unexpected feature of the dynamics was a pulsing phenomena experienced by the stays whole playout was used to control the deployment. A short description of the current status of DART is given.

Keat, James E.↗
NASA NTRS1980

MCC level C formulation requirements. Shuttle TAEM guidance and flight control, STS-1 baseline

The TAEM guidance and body rotational dynamics models required for the MCC simulation of the TAEM mission phase are defined. This simulation begins at the end of the entry phase and terminates at TAEM autoland interface. The logic presented is the required configuration for the first shuttle orbital flight (STS-1). The TAEM guidance is simulated in detail. The rotational dynamics simulation is a simplified model that assumes that the commanded rotational rates can be achieved in the integration interval. Thus, the rotational dynamics simulation is essentially a simulation of the autopilot commanded rates and integration of these rates to determine orbiter attitude. The rotational dynamics simulation also includes a simulation of the speedbrake deflection. The body flap and elevon deflections are computed in the orbiter aerodynamic simulation.

Carman, G. L.↗
NASA NTRS2004

Model implementation for dynamic computation of system cost for advanced life support

Life support system designs for long-duration space missions have a multitude of requirements drivers, such as mission objectives, political considerations, cost, crew wellness, inherent mission attributes, as well as many other influences. Evaluation of requirements satisfaction can be difficult, particularly at an early stage of mission design. Because launch cost is a critical factor and relatively easy to quantify, it is a point of focus in early mission design. The method used to determine launch cost influences the accuracy of the estimate. This paper discusses the appropriateness of dynamic mission simulation in estimating the launch cost of a life support system. This paper also provides an abbreviated example of a dynamic simulation life support model and possible ways in which such a model might be utilized for design improvement. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

NASA Discipline Life Support Systems↗