Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “D STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Multiple parton interaction studies at DØ

Here, we present the results of studies of multiparton interactions done by the DØ collaboration using the Fermilab Tevatron at a center of mass energy of 1.96 TeV. We also present three analyses, involving three distinct final signatures: (a) a photon with at least 3 jets ( γ + 3jets), (b) a photon with a bottom or charm quark tagged jet and at least 2 other jets ( γ + b/c + 2jets), and (c) two J/ ψ mesons. The fraction of photon + jet events initiated by double parton scattering is about 20%, while the fraction for events in which two J/ ψ mesons were produced is 30 ± 10. While the two measurements are statistically compatible, the difference might indicate differences in the quark and gluon distribution within a nucleon. Finally, this speculation originates from the fact that photon + jet events are created by collisions with quarks in the initial states, while J/ ψ events are produced preferentially by a gluonic initial state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solute diffusion behavior during heat treatment and its impact in Sc-microalloyed Al-Cu system

Scandium (Sc) is a promising microalloying element that enhances the strength and thermal stability of aluminum (Al) alloys. However, these benefits are not fully realized in aluminum-copper (Al-Cu) systems, and corrosion resistance often declines due to the complex phase evolution and diffusion behavior of Cu and Sc. Here, to clarify this, solute diffusion behavior and Cu-Sc interaction during heat treatment (HT) were investigated using in situ synchrotron-based transmission x-ray microscopy (TXM), wide-angle x-ray scattering (WAXS), and x-ray absorption near-edge structure (XANES) spectroscopy. The results, supported by electron microscopy, reveal strong Cu-Sc bonding that significantly impedes solute diffusion, leading to inhomogeneous solute distribution and non-uniform precipitation. Moreover, the Al-Cu-Sc eutectic phase exhibits high thermal stability, resisting dissolution even near the matrix liquidus. These findings quantitatively elucidate the sluggish diffusion kinetics of Cu and Sc, which can help redesign HT schedules to improve both mechanical properties and corrosion resistance in Sc-microalloyed Al-Cu alloys.

36 MATERIALS SCIENCE↗

Excitonic Effects in X-ray Absorption Spectra of Fluoride Salts and Their Surfaces

Given their natural abundance and thermodynamic stability, fluoride salts may appear as evolving components of electrochemical interfaces in Li-ion batteries and emergent multivalent ion cells. This is due to the practice of employing electrolytes with fluorine-containing species (salt, solvent, or additives) that electrochemically decompose and deposit on the electrodes. Operando X-ray absorption spectroscopy (XAS) can probe the electrode–electrolyte interface with a single-digit nanometer depth resolution and offers a wealth of insights into the evolution and Coulombic efficiency or degradation of prototype cells, provided that the spectra can be reliably interpreted in terms of local oxidation state, atomic coordination, and electronic structure about the excited atoms. Here we explore fluorine K-edge XAS of mono- (Li, Na, and K) and di-valent (Mg, Ca, and Zn) fluoride salts from a theoretical standpoint and discover a surprising level of detailed electronic structure information about these materials despite the relatively predictable oxidation state and ionicity of the fluoride anion and the metal cation. Utilizing a recently developed many-body approach based on the ΔSCF method, we calculate the XAS using density functional theory and experimental spectral profiles are well reproduced despite some experimental discrepancies in energy alignment within the literature, which we can correct for in our simulations. We outline a general methodology to explain shifts in the main XAS peak energies in terms of a simple exciton model and explain line-shape differences resulting from the mixing of core-excited states with metal d character (for K and Ca specifically). Given ultimate applications to evolving interfaces, some understanding of the role of surfaces and their terminations in defining new spectral features is provided to indicate the sensitivity of such measurements to changes in interfacial chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergies between Unsaturated Zn/Cu Doping Sites in Carbon Dots Provide New Pathways for Photocatalytic Oxidation

Unsaturated metal species (UMS) confined in nanomaterials play important roles for electron transfer in a wide range of catalytic reactions. However, the limited fabrication methods of UMS restrict their wider catalytic applications. Here in this paper, we report on the synergy of unsaturated Zn and Cu dopants confined in carbon dots (ZnCu-CDs) to produce enhanced electron transfer and photooxidation processes in the doped CDs. The Zn/Cu species chelate with the carbon matrix mainly through Cu-O(N)-Zn-O(N)-Cu complexes. Within this structure, Cu 2+ acts as a mild oxidizer that facilely increases the unsaturated Zn content and also precisely tunes the unsaturated Zn valence state to Zn d+ , where d is between 1 and 2, instead of Zn. With the help of UMS, electron-transfer pathways are produced, enhancing both the electron donating (7.0 times) and-accepting (5.3 times) abilities relative to conventional CDs. Because of these synergistic effects, the photocatalytic efficiency of CDs in photooxidation reactions is shown to improve more than 5-fold.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Eutectic Processing of Semiconductor Colloidal Nanocrystals for Energy Applications

Colloidal semiconductor nanocrystals (NCs) offer a costeffective platform for light-energy conversion in X-ray scintillators, photovoltaics, lasers, and display technologies. Yet, device-relevant NCs often require complex heterostructured compositions, where lattice imperfections compromise the efficiency and stability of photoconversion processes. Here, we show that a simple synthetic detour through a eutectic state of II−VI semiconductor NCs (e.g., CdSe, ZnSe) with halide salts (e.g., CdCl 2 , ZnCl 2 ) overcomes this limitation by melting and reconstructing NC lattices into defect-free alloyed and core/shell architectures. Applied to ternary CdSeTe NCs, this process produces downconverters with record brightness and minimal line widths, delivering a 3-fold increase in film-side external quantum efficiency of commercial CdTe photovoltaic modules (First Solar Inc.). Meanwhile, eutectic processing of CdSe-based core/shell emitters yields an 8-fold enhancement in their photoluminescence stability under backlight operation, addressing the reliability bottleneck for display technologies. Together, these findings establish eutectic NC processing as a scalable route to efficient, durable photoconversion materials for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The [4Fe-4S] Cluster of HydF Is Essential for [FeFe]-Hydrogenase Maturation

The organometallic H-cluster of the [FeFe]-hydrogenase is assembled in vivo through a complex process requiring the action of three dedicated maturation enzymes, HydG, HydE, and HydF, as well as the aminomethyl-lipoyl-H-protein (H met ) of the glycine cleavage system (GCS). Here we probe the role of HydF and its [4Fe-4S] cluster in [FeFe]-hydrogenase maturation by using a defined semisynthetic approach in which [Fe I 2 (μ-SH) 2 (CO) 4 (CN) 2 ] 2– ([2Fe] E ) is used to bypass HydE and HydG, and GCS components are used in place of cell lysate. We show that inclusion of the iron–sulfur carrier protein NfuA and the high-CO-affinity myoglobin variant Mb H64L provides dramatically improved hydrogenase activities up to 828 μmol/min/mg, equivalent to the best reported activities for Chlamydomonas reinhardtii [FeFe]-hydrogenase isolated from the native organism. Apo-HydF lacking a [4Fe-4S] cluster provides very little hydrogenase activity; however, full maturation is restored with the addition of NfuA, which we demonstrate reconstitutes the [4Fe-4S] cluster of HydF. In addition, a HydF variant lacking a [4Fe-4S] cluster by changing two cysteine ligands to alanine is completely unable to support either semisynthetic maturation using [2Fe] E , or full maturation using HydG and HydE, even in the presence of NfuA, demonstrating that the HydF [4Fe-4S] cluster is absolutely essential for [FeFe]-hydrogenase maturation. The possibility that the HydF [4Fe-4S] cluster plays a role in direct binding of [2Fe] E is negated by our results with the HydF D311C variant, which demonstrate that the labile Asp311 cluster ligand is not essential for [2Fe] E binding and HydA maturation. We therefore conclude that [2Fe]E binds HydF adjacent to, but not directly coordinated to, the [4Fe-4S] cluster. The HydF [4Fe-4S] cluster is proposed to be essential due to its impact on the [2Fe] E binding orientation and the ability of the HydF/[2Fe] E complex to form productive interactions with H met or the H met /T-protein complex during DTMA ligand biosynthesis.

cluster chemistry↗

Multiscale simulation of the ground and photo-induced charge-separated states of a molecular triad in polar organic solvent: Exploring the conformations, fluctuations, and free energy landscapes

Here, the approach of a multiscale simulation that combines quantum chemical calculations, classical molecular dynamics simulations, and statistical physics to integrate the information of the electronic states of a conformationally complex molecule into its structural distribution over an ensemble was performed to understand the influence of a polar organic solvent on the structural stability of carotene-porphyrin-fullerene molecular triad in both the ground and the photoinduced charge-separated excited states. The excited states of the triad were computed with the ab initio quantum chemical calculations using the algebraic diagrammatic construction through the second order correction (ADC(2)) method and the time-dependent density functional theory (TDDFT). The replica exchange molecular dynamics was used for the enhanced sampling of the ensemble in order to explore the phase space of the ground state and the photoinduced charge-separated excited state of triad in explicit tetrahydrofuran (THF) solvent. An importance sampling was strategically employed to bridge the gap between the two computational methods that aim to explore distinct realms of dynamics. We analyzed the free energy landscape, the structural fluctuations, the solvent arrangements, the static dielectric constant, and the interactions between the triad and the solvent molecules. The analysis of the free energy landscape of the triad indicates that the charge-separated excited state of the triad is thermodynamically stable in a linearly extended geometry, while the ground-state triad explores several extended and bent conformations that are populated in the local free energy minima separated by low free energy barriers at an order of thermal fluctuation (kBT). The stabilization of a linearly extended structure of the charge-separated excited state triad is predominantly due to the solvation interactions (van der Waals and electrostatic interactions) between the triad and the THF molecules as well as the interactions within the THF molecules. Differences in the charge distribution on a molecular triad induce slight changes in the dielectric property of THF near the triad. Our study suggests that by measuring the differences in a dielectric response of solvent near the triad, it is possible to provide insight into the population of the charge-separated electronic state of the triad relative to that of the ground state.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Topological Insulator Nanowires and Nanoribbons

Recent theoretical calculations and photoemission spectroscopy measurements on the bulk Bi{sub 2}Se{sub 3} material show that it is a three-dimensional topological insulator possessing conductive surface states with nondegenerate spins, attractive for dissipationless electronics and spintronics applications. Nanoscale topological insulator materials have a large surface-to-volume ratio that can manifest the conductive surface states and are promising candidates for devices. Here we report the synthesis and characterization of high quality single crystalline Bi{sub 2}Se{sub 3} nanomaterials with a variety of morphologies. The synthesis of Bi{sub 2}Se{sub 3} nanowires and nanoribbons employs Au-catalyzed vapor-liquid-solid (VLS) mechanism. Nanowires, which exhibit rough surfaces, are formed by stacking nanoplatelets along the axial direction of the wires. Nanoribbons are grown along [11-20] direction with a rectangular crosssection and have diverse morphologies, including quasi-one-dimensional, sheetlike, zigzag and sawtooth shapes. Scanning tunneling microscopy (STM) studies on nanoribbons show atomically smooth surfaces with {approx}1 nm step edges, indicating single Se-Bi-Se-Bi-Se quintuple layers. STM measurements reveal a honeycomb atomic lattice, suggesting that the STM tip couples not only to the top Se atomic layer, but also to the Bi atomic layer underneath, which opens up the possibility to investigate the contribution of different atomic orbitals to the topological surface states. Transport measurements of a single nanoribbon device (four terminal resistance and Hall resistance) show great promise for nanoribbons as candidates to study topological surface states.

36 MATERIALS SCIENCE↗

Upper Atmosphere Heating From Ocean-Generated Acoustic Wave Energy

We present that colliding sea surface waves generate the ocean microbarom, an acoustic signal that may transmit significant energy to the upper atmosphere. Previous estimates of acoustic energy flux from the ocean microbarom and mountain-wind interactions are on the order of 0.01 to 1 mW/m 2 , heating the thermosphere by tens of Kelvins per day. We captured upgoing ocean microbarom waves with a balloon-borne infrasound microphone; the maximum acoustic energy flux was approximately 0.05 mW/m 2 . This is about half the average value reported in previous ground-based microbarom observations spanning 8 years. The acoustic flux from the microbarom episode described here may have heated the thermosphere by several Kelvins per day while the source persisted. Lastly, we suggest that ocean wave models could be used to parameterize acoustically generated heating of the upper atmosphere based on sea state.

58 GEOSCIENCES↗

Following excited-state chemical shifts in molecular ultrafast x-ray photoelectron spectroscopy

The conversion of photon energy into other energetic forms in molecules is accompanied by charge moving on ultrafast timescales. We directly observe the charge motion at a specific site in an electronically excited molecule using time-resolved x-ray photoelectron spectroscopy (TR-XPS). We extend the concept of static chemical shift from conventional XPS by the excited-state chemical shift (ESCS), which is connected to the charge in the framework of a potential model. This allows us to invert TR-XPS spectra to the dynamic charge at a specific atom. We demonstrate the power of TR-XPS by using sulphur 2p-core-electron-emission probing to study the UV-excited dynamics of 2-thiouracil. The method allows us to discover that a major part of the population relaxes to the molecular ground state within 220–250 fs. In addition, a 250-fs oscillation, visible in the kinetic energy of the TR-XPS, reveals a coherent exchange of population among electronic states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting disruptive instabilities in controlled fusion plasmas through deep learning

Nuclear fusion power delivered by magnetic-confinement tokamak reactors holds the promise of sustainable and clean energy1. The avoidance of large-scale plasma instabilities called disruptions within these reactors is one of the most pressing challenges, because disruptions can halt power production and damage key components. Disruptions are particularly harmful for large burning-plasma systems such as the multibillion-dollar International Thermonuclear Experimental Reactor (ITER) project currently under construction, which aims to be the first reactor that produces more power from fusion than is injected to heat the plasma. Here we present a method based on deep learning for forecasting disruptions. Our method extends considerably the capabilities of previous strategies such as first-principles-based and classical machine-learning approaches. In particular, it delivers reliable predictions for machines other than the one on which it was trained—a crucial requirement for future large reactors that cannot afford training disruptions. Our approach takes advantage of high-dimensional training data to boost predictive performance while also engaging supercomputing resources at the largest scale to improve accuracy and speed. Trained on experimental data from the largest tokamaks in the United States (DIII-D) and the world (Joint European Torus, JET), our method can also be applied to specific tasks such as prediction with long warning times: this opens up the possibility of moving from passive disruption prediction to active reactor control and optimization. These initial results illustrate the potential for deep learning to accelerate progress in fusion-energy science and, more generally, in the understanding and prediction of complex physical systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diet outperforms microbial transplant to drive microbiome recovery in mice

A high-fat, low-fibre Western-style diet (WD) induces microbiome dysbiosis characterized by reduced taxonomic diversity and metabolic breadth, which in turn increases risk for a wide array of metabolic, immune and systemic pathologies. Recent work has established that WD can impair microbiome resilience to acute perturbations such as antibiotic treatment, although little is known about the mechanism of impairment and the specific consequences for the host of prolonged post-antibiotic dysbiosis. Here, in this study, we characterize the trajectory by which the gut microbiome recovers its taxonomic and functional profile after antibiotic treatment in mice on regular chow (RC) or WD, and find that only mice on RC undergo a rapid successional process of recovery. Metabolic modelling indicates that a RC diet promotes the development of syntrophic cross-feeding interactions, whereas in mice on WD, a dominant taxon monopolizes readily available resources without releasing syntrophic byproducts. Intervention experiments reveal that an appropriate dietary resource environment is both necessary and sufficient for rapid and robust microbiome recovery, whereas microbial transplant is neither. Furthermore, prolonged post-antibiotic dysbiosis in mice on WD renders them susceptible to infection by the intestinal pathogen Salmonella enterica serovar Typhimurium. Our data challenge widespread enthusiasm for faecal microbiota transplant (FMT) as a strategy to address dysbiosis, and demonstrate that specific dietary interventions are, at a minimum, an essential prerequisite for effective FMT, and may afford a safer, more natural and less invasive alternative.

Kennedy, M. S. [University of Chicago, IL (United ↗

Anisotropic Dirac Fermions in BaMnBi2 and BaZnBi2

Abstract We investigate the electronic structure of BaMnBi 2 and BaZnBi 2 using angle-resolved photoemission spectroscopy and first-principles calculations. Although they share similar structural properties, we show that their electronic structure exhibit dramatic differences. A strong anisotropic Dirac dispersion is revealed in BaMnBi 2 with a decreased asymmetry factor compared with other members of AMnBi 2 (A = alkali earth or rare earth elements) family. In addition to the Dirac cones, multiple bands crossing the Fermi energy give rise to a complex Fermi surface topology for BaZnBi 2 . We further show that the strength of hybridization between Bi- p and Mn- d /Zn- s states is the main driver of the differences in electronic structure for these two related compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A divergent synthetic route to functional copolymer libraries via modular polymers

High-throughput polymer synthesis enables rapid exploration of chemical space but remains limited by batch-to-batch inconsistencies that can obscure structure–property relationship trends. To address this challenge, we developed a synthetic approach to produce multifunctional copolymers using post-polymerization modification of activated ester modular polymers with commercially available amines. Easily derivitized parent polymers—poly(tetrafluorophenyl acrylate) and poly(tetrafluorophenyl styrene sulfonate)—were synthesized by RAFT polymerization to yield single polymer batches containing highly reactive tetrafluorophenyl esters or sulfonate esters on each repeat unit. Tuning post-polymerization modification reaction conditions enabled the addition of sub-stoichiometric amounts of amines (relative to the repeat unit) to yield partially functionalized intermediates that could then be further derivatized. Reaction monitoring by 19 F NMR spectroscopy confirmed good control over these sequential post-polymerization modifications. This synthetic route produced a variety of copolymers with defined comonomer ratios while preserving the underlying polymer structure (degree of polymerization, dispersity, tacticity) for both the acrylate and styrene sulfonate backbones. We further applied this approach in a divergent manner to create a small library of structurally distinct copolymers from a single parent batch in three synthetic steps. This modular, divergent synthesis demonstrates a general route to structurally consistent copolymer libraries that enable systematic studies of structure–property relationships and can accelerate functional materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isomer Studies for Nuclei near the Proton Drip Line in the Mass 130-160 Region

This report details the status of an experimental research programme which has studied isomeric states in the mass 130-160 region of the nuclear chart. Several new isomers have been established and characterised near the proton drip line using a recoil isomer tagging technique at the University of Jyvaeskylae, Finland. The latest experiments have been performed with a modified setup where the standard GREAT focal-plane double-sided silicon-strip detector was changed to a dual multi-wire proportional-counter arrangement. This new setup has improved capability for short-lived isomer studies where high focal-plane rates can be tolerated. The results of key recent experiments for nuclei situated above ({sup 153}Yb,{sup 152}Tm) and below ({sup 136}Pm,{sup 142}Tb) the N = 82 shell gap were presented along with an interpretation for the isomers. Finally, the future prospects of the technique, using an isomer-tagged differential-plunger setup, were discussed. This technique will be capable of establishing the deformation of the states above the isomers and will aid in the process of assigning underlying single-particle configurations to the isomeric states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Prediction of Service Life of Cordierite-Mullite Refractory Materials by Non-Destructive Methods

Ultrasonic pulse velocity testing was used to perform non-destructive quality control of refractory plates used as substrates in fast firing of porcelain whitewares. The measurement of the ultrasonic velocity was used to asses the presence of internal voids or cracks originated from the manufacturing procedure. Image analysis was used to predict thermal stability of the refractory materials. Two cordierite-mullite compositions were investigated that are characterized by different microstructure morphologies and crack propagation behaviour. A brief discussion about the correlation between microstructure, crack propagation behaviour and thermal shock resistance is presented. Moreover, empirical models were developed to predict the service life of refractory plates from measured values of ultrasonic velocities in plates in the as-received state.

36 MATERIALS SCIENCE↗

Influence of suprathermal background electrons on strong auroral double layers: Laminar and turbulent regimes

A series of one-dimensional Vlasov simulations [Newman et al., Phys. Plasmas 15, 072902 (2008), this issue] show that a sufficiently dense and hot suprathermal electron population can stabilize strong laminar double layers over long periods while regulating their strength and velocity. When suprathermals are less dense or absent, the double layers tend to be sporadic and turbulent. A detailed comparison of the laminar and turbulent regimes reveals that the disruption of the laminar state can be triggered by kinetically modified Buneman instabilities on the low-potential side of the double layer, and by density perturbations that develop into nonlinear coherent shocklike structures on the high-potential side. These findings suggest that the suprathermal electrons may be responsible for suppressing both of these routes to disruption of the laminar state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improvements to a cryosystem to observe ice nucleating in a variable pressure scanning electron microscope

The variable pressure scanning electron microscope (VPSEM) has expanded the scope of the SEM to allow the imaging of dynamic, electrically insulating systems. The use of water vapor as the imaging gas present in the chamber allows the successful imaging of hydrated samples. As awareness of the system capabilities becomes more well known, greater pressure has been put onto the microscopist to push the boundaries of both temperature and resolution for the study of diverse hydrated samples whose dynamics may not occur at the usual room temperatures in a VPSEM. In this article we discuss the stages in the development of a cryosystem that has led to the successful observation of the nucleation of ice from a solution in situ. This investigation also leads to further possibilities of imaging hydrated samples in the little explored temperature range of 188-238 K (from -85 to-35 deg. C). This study includes the exploration of how the temperature of various surfaces inside the microscope will change the system's ability to keep a sample hydrated or in its native state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗