Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Content Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Climatic modification by CO2, H2O, and aerosol

Research is reported on the effects of increasing the CO2, aerosols, and water content of the atmosphere on the surface temperature and climatology. An atmospheric model is described with the incoming solar radiation for a planetary albedo of 33 percent, surface temperature of 288 K, relative humidity of 75 percent, cloud cover of 48 percent, CO2 of 0.3 parts per thousand, and aerosol density of two million per square centimeter. The results show that if the CO2 increases by a factor of 1000 or more, the total pressure of the atmosphere increases, and the earth may become as hot as Venus. It is also shown that as the amount of dust particles in the atmosphere increases, the solar radiation decreases, and the surface temperature lowers.

Rasool, I.↗
NASA NTRS1976

Doppler noise considered as a function of the signal path integration of electron density

The hypothesis is advanced that observed Doppler noise during solar conjunctions is proportional to total columnar electron content along the signal path. This assumption leads directly to a geometrical model (ISED) for observed Doppler noise which is shown to be in very good agreement with Doppler noise data accumulated during the 1975 Pioneer 10, Pioneer 11 and Helios 1 solar conjunctions. An augmented model is constructed which quantitatively indicates correlation between earth observed sunspot activity and systematic, cyclical deviations from the ISED model.

Berman, A. L.↗
NASA NTRS1977

A simulation of air pollution model parameter estimation using data from a ground-based LIDAR remote sensor

One way to obtain estimates of the unknown parameters in a pollution dispersion model is to compare the model predictions with remotely sensed air quality data. A ground-based LIDAR sensor provides relative pollution concentration measurements as a function of space and time. The measured sensor data are compared with the dispersion model output through a numerical estimation procedure to yield parameter estimates which best fit the data. This overall process is tested in a computer simulation to study the effects of various measurement strategies. Such a simulation is useful prior to a field measurement exercise to maximize the information content in the collected data. Parametric studies of simulated data matched to a Gaussian plume dispersion model indicate the trade offs available between estimation accuracy and data acquisition strategy.

Kibler, J. F.↗
NASA NTRS1981

Partition coefficients for REE between garnets and liquids - Implications of non-Henry's Law behaviour for models of basalt origin and evolution

An experimental investigation of Ce, Sm and Tm rare earth element (REE) partition coefficients between coexisting garnets (both natural and synthetic) and hydrous liquids shows that Henry's Law may not be obeyed over a range of REE concentrations of geological relevance. Systematic differences between the three REE and the two garnet compositions may be explained in terms of the differences between REE ionic radii and those of the dodecahedral site into which they substitute, substantiating the Harrison and Wood (1980) model of altervalent substitution. Model calculations demonstrate that significant variation can occur in the rare earth contents of melts produced from a garnet lherzolite, if Henry's Law partition coefficients do not apply for the garnet phase.

Harrison, W. J.↗
NASA NTRS1981

Wet oxidation as a waste treatment in closed systems

The chemistry of the wet oxidation process has been investigated in relation to production of plant nutrients from plant and human waste materials as required for a closed life-support system. Hydroponically grown lettuce plants were used as a model plant waste and oxygen gas was used as oxidant. Organic nitrogen content was decreased 88-100% depending on feed material. Production of ammonia and nitrogen gas account for all of the observed decrease in organic nitrogen content. No nitrous oxide (N2O) was detected. The implications of these results for closed life-support systems are discussed.

Onisko, B. L.↗
NASA NTRS1984

Cage Regional Energy Budgets from the GLAS 4TH Order Model

The status and future plans of a study to (1) assess the accuracy of regional energy balance calculations obtained from the 4th-order model, (2) determine the impact of satellite data on the calculations, and (3) determine their utility for ocean energy transport studies are discussed. An equation is presented which models the vertically-integrated, time and areally-averaged total energy content of a region of the atmosphere extending from the surface to the top of the atmosphere. All of the terms of the equation were evaluated using early versions of the GLAS FGGE IIIb analysis, and analysis with satellite data deleted. Results show that the budget is dominated by the surface fluxes, net radiation, and horizontal atmospoheric divergence.

Herman, G. F.↗
NASA NTRS1992

Experimental study of performance degradation of a rotating system in the NASA Lewis RC icing tunnel

The Helicopter Icing Consortium (HIC) conducted one of the first U.S. tests of a heavily instrumented model in the controlled environment of a refrigerated tunnel. In the Icing Research Tunnel (IRT) at NASA LeRC, ice was accreted on the main rotor blade of the BMTR-1 Sikorsky model helicopter under a variety of environmental conditions, such that liquid water content (LWC) and volume mean droplet diameter (VMD) ranges reflected the Federal Aviation Agency and Department of Defence icing condition envelopes. This report gives the correlated results of the data provided by NASA LeRC. The method of statistical analysis is discussed. Lift, thrust, and torque coefficients are presented as a function of icing time, as correlated with changes in ambient temperature, LWC, and VMD. The physical significance of these forces is discussed.

Korkan, Kenneth↗
NASA NTRS1993

Ignition and combustion of aluminum/magnesium alloy particles in O2 at high pressures

The ignition and combustion of Al, Mg, and Al/Mg alloy particles in 99 percent O2/1 percent N2 mixtures is investigated at high temperatures and pressures for rocket engine applications. The 20-micron particles contain 0, 5, 10, 20, 40, 60, 80, and 100 wt pct Mg alloyed with Al, and are ignited in oxygen using the reflected shock in a single-pulse shock tube near the endwall. Using this technique, the ignition delay and combustion times of the particles are measured at temperatures up to 3250 K as a function of Mg content for oxygen pressures of 8.5, 17, and 34 atm. An ignition model is developed that employs a simple lumped capacitance energy equation and temperature and pressure dependent particle and gas properties. Good agreement is achieved between the measured and predicted trends in the ignition delay times.

Roberts, Ted A.↗
NASA NTRS1993

Analysis of the GOES 6.7 micrometer channel observations during FIRE 2

Clouds form in moist environments. FIRE Phase II Cirrus Implementation Plan (August, 1990) noted the need for mesoscale measurements of upper tropospheric water vapor content. These measurements are needed for initializing and verifying numerical weather prediction models and for describing the environment in which cirrus clouds develop and dissipate. Various instruments where deployed to measure the water vapor amounts of the upper troposphere during FIRE II (e.g. Raman lidar, CLASS sonds and new cryogenic frost hygrometer on-board aircraft). The formation, maintenance and dissipation of cirrus clouds involve the time variation of the water budget of the upper troposphere. The GOES 6.7 mu m radiance observations are sensitive to the upper tropospheric relative humidity, and therefore proved extremely valuable in planning aircraft missions during the field phase of FIRE II. Warm 6.7 mu m equivalent black body temperatures indicate a relatively dry upper troposphere and were associated with regions generally free of cirrus clouds. Regions that were colder, implying more moisture was available may or may not have had cirrus clouds present. Animation of a time sequence of 6.7 mu m images was particularly useful in planning various FIRE missions. The 6.7 mu m observations can also be very valuable in the verification of model simulations and describing the upper tropospheric synoptic conditions. A quantitative analysis of the 6.7 mu m measurement is required to successfully incorporate these satellite observations into describing the upper tropospheric water vapor budget. Recently, Soden and Bretherton (1993) have proposed a method of deriving an upper tropospheric humidity based on observations from the GOES 6.7 mu m observations. The method is summarized in the next section. In their paper they compare their retrieval method to radiance simulations. Observations were also compared to ECMWF model output to assess the model performance. The FIRE experiment provides a unique opportunity to further verify the GOES upper tropospheric relative humidity retrieval scheme by providing (1) aircraft observations to cross-validate the calibration of the GOES 6.7 mu m channel, (2) accurate upper tropospheric water vapor concentrations for verification, and (3) veritical variability of upper tropospheric water vapor.

Soden, B. J.↗
NASA NTRS2004

Microphysical Characterization of Ice in Hurricane Erin for Wideband Passive Microwave Comparisons

In order to better understand the characteristics of frozen hydrometeors in hurricane systems, computed brightness temperatures were compared with observations of Hurricane Erin from CAMEX-4 radiometers on the ER-2 aircraft. These wideband observations ranged from 10.7 to 183 plus or minus 10 GHz. In order to initialize the cloud profiles used in the radiative transfer calculations, radar reflectivities from an ER-2 instrument were converted to mass contents at specified height levels. Dropsonde data from the ER-2 and modeled Hurricane Andrew data were used to generate profiles of temperature, pressure, and relative humidity and to provide surface wind speed and ocean temperature. Four different ice (size and density) parameterizations were used to compute brightness temperature values. The comparisons between the calculated and observed brightness temperatures show that in general the Grenfell and Warren particle size distribution does the best job of matching the observations for most of the high frequencies. These high frequencies (greater than or equal to 85 GHz) are particularly sensitive to frozen particles. The Sehkon and Srivastava particle size distribution produced brightness temperatures that were too cold in most cases. On the other hand, the fluffy snow particle parameterizations with and without a melting layer produced brightness temperatures that were much warmer than the observations at these high frequencies. All low frequency calculations track the observations well except in the eye of Hurricane Erin where the surface wind speed and/or near surface temperatures were not properly adjusted to warm the brightness temperature calculations to values closer to the observations. Overall, this work shows that selecting a proper ice particle parameterization can be difficult and additional in situ measurements are needed to define appropriate parameterizations.

Skofronick-Jackson, G.↗
NASA NTRS1994

Partial resolution of sources of n-alkanes in the saline portion of the Parachute Creek Member, Green River Formation (Piceance Creek Basin, Colorado)

Systematic variations in the 13C contents of individual extractable n-alkanes (C16-C29) can be modelled quantitatively and interpreted as indicating contributions from at least five distinct sources. These appear to be cyanobacterial (C16-C18, delta 13C = -37% vs PDB), phytoplanktonic (C16-C23, delta = -32%), chemoautotrophic bacterial (C20-C29, delta = -38%), phytoplanktonic or heterotrophic bacterial (C20-C29, delta = -30%), and vascular plants (C23-C29, delta = -29%). Hydrous pyrolysis of related kerogens yields large quantities of additional n-alkanes with different and much more uniform delta values. The latter materials are apparently derived from the thermolysis of aliphatic biopolymers whose presence in the Green River Oil Shale has been recognized visually.

Non-NASA Center↗
NASA NTRS2003

On the ionospheric impact of recent storm events on satellite-based augmentation systems in middle and low-latitude sectors

The Ionospheric correction algorithms have been characterized extensively for the mid-latitude region of the ionosphere where benign conditions usually exist. The United States Federal Aviation Administration's (FAA) Wide Area Augmentation System (WAAS) for civil aircraft navigation is focused primarily on the Conterminous United States (CONUS). Other Satellite-based Augmentation Systems (SBAS) include the European Geostationary Navigation Overlay Service (EGNOS) and the Japanese Global Navigation Satellite System (MSAS). Researchers are facing a more serious challenge in addressing the ionospheric impact on navigation using SBAS in other parts of the world such as the South American region on India. At equatorial latitudes, geophysical conditions lead to the so-called Appleton-Hartree (equatorial) anomaly phenomenon, which results in significantly larger ionospheric range delays and range delay spatial gradients than is observed in the CONUS or European sectors. In this paper, we use GPS measurements of geomagnetic storm days to perform a quantitative assessment of WAAS-type ionospheric correction algorithms in other parts of the world such as the low-latitude Brazil and mid-latitude Europe. For the study, we access a world-wide network of 400+ dual frequency GPS receivers.

validation↗
NASA NTRS2013

GASPS--A Herschel Survey of Gas and Dust in Protoplanetary Disks: Summary and Initial Statistics

We describe a large-scale far-infrared line and continuum survey of protoplanetary disk through to young debris disk systems carried out using the ACS instrument on the Herschel Space Observatory. This Open Time Key program, known as GASPS (Gas Survey of Protoplanetary Systems), targeted approx. 250 young stars in narrow wavelength regions covering the [OI] fine structure line at 63 micron the brightest far-infrared line in such objects. A subset of the brightest targets were also surveyed in [OI]145 micron, [CII] at 157 μm, as well as several transitions of H2O and high-excitation CO lines at selected wavelengths between 78 and 180 micron. Additionally, GASPS included continuum photometry at 70, 100 and 160 micron, around the peak of the dust emission. The targets were SED Class II– III T Tauri stars and debris disks from seven nearby young associations, along with a comparable sample of isolated Herbig AeBe stars. The aim was to study the global gas and dust content in a wide sample of circumstellar disks, combining the results with models in a systematic way. In this overview paper we review the scientific aims, target selection and observing strategy of the program. We summarize some of the initial results, showing line identifications, listing the detections, and giving a first statistical study of line detectability. The [OI] line at 63 micron was the brightest line seen in almost all objects, by a factor of ∼10. Overall [OI] 63 micron detection rates were 49%, with 100% of HAeBe stars and 43% of T Tauri stars detected. A comparison with published disk dust masses (derived mainly from sub-mm continuum, assuming standard values of the mm mass opacity) shows a dust mass threshold for [OI] 63 μm detection of approx.10(exp -5) Solar M.. Normalizing to a distance of 140 pc, 84% of objects with dust masses ≥10 (exp -5) Solar M can be detected in this line in the present survey; 32% of those of mass 10(exp -6) – 10 (exp -5) Solar M, and only a very small number of unusual objects with lower masses can be detected. This is consistent with models with a moderate UV excess and disk flaring. For a given disk mass, [OI] detectability is lower for M stars compared with earlier spectral types. Both the continuum and line emission was, in most systems, spatially and spectrally unresolved and centered on the star, suggesting that emission in most cases was from the disk. Approximately 10 objects showed resolved emission, most likely from outflows. In the GASPS sample, [OI] detection rates in T Tauri associations in the 0.3–4 Myr age range were approx. 50%. For each association in the 5–20 Myr age range, approx. 2 stars remain detectable in [OI] 63 micron, and no systems were detected in associations with age >20 Myr. Comparing with the total number of young stars in each association, and assuming a ISM-like gas/dust ratio, this indicates that approx. 18% of stars retain a gas-rich disk of total mass approx. Jupiter- M for 1–4 Myr, 1–7% keep such disks for 5–10 Myr, but none are detected beyond 10–20 Myr. The brightest [OI] objects from GASPS were also observed in [OI]145 micron, [CII]157 micron and CO J = 18- 17, with detection rates of 20–40%. Detection of the [CII] line was not correlated with disk mass, suggesting it arises more commonly from a compact remnant envelope.

Herschel Space Observatory↗
NASA NTRS2017

Current Status and Future Challenges in Risk-Based Radiation Engineering

This presentation covers the basis and challenges for radiation effects in electronic systems. The three main types of radiation effects in electronics are: 1) total ionizing dose (TID), 2) total non-ionizing dose (TNID) / displacement damage dose (DDD), and 3) single-event effect (SEE). Some content on relevant examples of effects, current concerns, and possible environmental model-driven solutions are also included.

Total Ionizing Dose (TID)↗
NASA NTRS2015

Normalizing Resource Identifiers using Lexicons in the Global Change Information System: Linking Earth Science Identifiers, Concepts, and Communities

Earth Science informatics involves collaboration between multiple groups of people with diverse specializations and goals,often using variations in terminology to refer to common resources. The uniformity of the resource identifiers often does not cross organizational boundaries. Because of this, permanent, widely used, unambiguous identifiers for resources are elusive. We examine real world cases of changing and inconsistent identifiers which inherently work against persistence and uniformity. We also present a solution which mediates factors in these situations; namely the creation of lexicons:mappings of sets of terms to URIs which are curated within the Global Change Information System (GCIS). We discuss aspects of the GCIS which facilitate the use of lexicons: an information model which disambiguates resources, a RESTful API which provides metadata through content-negotiation, and a strategy for long term curation of URIs, including mechanisms for handling changes to URIs and variations in terms used by different communities while providing persistent URIs and preserving relationships between resources We provide working definitions of terms,contexts, and lexicons, and relate them to the practical challenges of disambiguation and curation. We also discuss the mechanisms employed and architecture of the GCIS, and how these choices facilitate representation of persistent identifiers and mappings of them to identifiers used colloquially within various earth science communities of practice.

Linkded Data↗
NASA NTRS2019

Enhancing GPM Passive and Combined Microwave Algorithms with Dynamic Surface Information for Drizzle Retrieval and Improved Precipitation Detection Over Land

Following the 2014 launch of the Global Precipitation Measurement Mission (GPM), an unprecedented combination of coincident active and passive microwave observations are available for state of the art precipitation retrieval. The GPM Combined Algorithm forms the backbone of this effort, optimizing geophysical variables for agreement with the full suite of multi-spectral information content. These combined retrievals are then utilized, along with a radiative transfer model, as a database applied for retrievals across a constellation of passive microwave radiometers of varying frequencies. By keeping such retrievals related through the transfer standard of the combined algorithm, level 3 products such as the Integrated Multi-satellitE Retrievals for GPM (IMERG) are able to provide consistent global products for users at the higher temporal resolution required for hydrological applications. In initial versions of the combined product, precipitation retrievals are carried out only in the presence of a signal from the active radar. As a result, light precipitation and drizzle below the threshold of DPR sensitivity are not included in any of the products down the chain from the constellation to IMERG. In this work, the effects of enhancing the retrievals with a surface emissivity and non-raining water vapor retrieval using the passive observations are explored. Over both ocean and land, the surface retrieval is used to identify areas with high probability of light precipitation and drizzle which is then quantified using techniques derived from the higher sensitivity CloudSat mission. Results indicate successful inclusion of drizzle in the retrievals that can then be included in the constellation databases, as well as improvement in passive microwave false positive precipitation signals over land in cases where surface scattering was misinterpreted as precipitation signal. The inclusion of the dynamic surface information also creates a more robust, radiometrically consistent retrieval scheme for process studies and hydrologic applications.

Ringerud, Sarah↗
NASA NTRS1994

Retrieval of Forest Canopy Parameters for OTTER Using an Optimized Technique

An inversion algorithm based on a nonlinear optimization technique is used to retrieve a subset of forest canopy parameters that can be used in ecosystem modeling. The inversion algorithm uses a parametric model derived from a discrete component forest scattering model which includes all major scattering contributions to radar backscatter. The parametric model, however, is derived for cases where only one mechanism dominates the scattering process, in this case, branch layer volume scattering.The inversion algorithm is shown to be a useful tool in the quantative monitoring of canopy moisture status, as well as a building block of its future versions which will include a more comprehensive set of forest scattering parameters as unknowns.

forest↗
NASA NTRSDate not supplied

First Optical Constants from 0.4 to 1.6 µm of Titan Aerosol Analogs Produced in the NASA Ames COSmIC Facility and Their Use in a New Analysis of Cassini VIMS Observations

We have determined the real and imaginary refractive indices (n and k, respectively), from the visible to the near infrared (0.4 to 1.6 μm), of five laboratory-generated organic refractory materials produced from gas-phase chemistry with the NASA Ames COSmIC facility. The solid samples were produced using a plasma discharge in the stream of a 200-K supersonic jet-cooled expansion of different gas mixtures to study the impact of the molecular precursors on the solid sample optical properties. Three samples were produced from N2:CH4 (95:5) gas mixtures using three different high voltages (700V, 800V and 1000V) to vary the energy in the plasma discharge. One sample was produced from a N2:CH4:C2H2 (94:5:5:0.5) gas mixture, with a high voltage of 1000 V. The fifth sample was produced in an Ar:CH4 (95:5) gas mixture with a high voltage of 1000 V to produce a nitrogen-free hydrocarbon sample. The optical constants, n and k, of these five samples were determined using spectral reflectance measurements. They appear to be positively correlated with the nitrogen content in the solid sample, i.e., a sample with larger nitrogen content exhibits higher n and k values. We have used these refractive indices as input parameters in a radiative transfer model to analyze Cassini Visible Infrared Mapping Spectrometer (VIMS) observations of Titan’s atmosphere. The results show that using the tholin samples with higher n and k values (higher nitrogen content) provides a better fit to the observational data than using the samples with lower n and k values (lower nitrogen content). The Titan tholins with higher nitrogen content therefore appear to be more representative of the Titan aerosols observed by VIMS.

Titan Aerosol Analogs↗