Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A comparison between backscattering coefficients using Gaussian and non-Gaussian surface statistics

Backscattering coefficients computed using Gaussian and non-Gaussian surface statistics are compared. The computations are performed for a class of surface-height distributions and surface correlation functions. Results indicate that the coherent component of the scattering coefficient is strongly dependent upon the surface-height distribution. The noncoherent component also depends on the surface-height distribution and the surface root-mean-square (rms) slope when the rms surface height is large relative to the incident wavelength. On the other hand, when the surface rms height is moderate or small, the noncoherent component is sensitive mainly to the surface-height correlation function.

Eom, H. J.↗

Effects of vegetation canopy on the radar backscattering coefficient

Airborne L- and C-band scatterometer data, taken over both vegetation-covered and bare fields, were systematically analyzed and theoretically reproduced, using a recently developed model for calculating radar backscattering coefficients of rough soil surfaces. The results show that the model can reproduce the observed angular variations of radar backscattering coefficient quite well via a least-squares fit method. Best fits to the data provide estimates of the statistical properties of the surface roughness, which is characterized by two parameters: the standard deviation of surface height, and the surface correlation length. In addition, the processes of vegetation attenuation and volume scattering require two canopy parameters, the canopy optical thickness and a volume scattering factor. Canopy parameter values for individual vegetation types, including alfalfa, milo and corn, were also determined from the best-fit results. The uncertainties in the scatterometer data were also explored.

Mo, T.↗

A recontoured, upper surface designed to increase the maximum lift coefficient of a modified NACA 65 (0.82) (9.9) airfoil section

A recontoured upper surface was designed to increase the maximum lift coefficient of a modified NACA 65 (0.82)(9.9) airfoil section which was tested at Mach numbers of 0.3 and 0.4 and Reynolds numbers of 2.3x10(6) and 4.3x10(6). The original 6-series section was tested for comparison with the recontoured section. The recontoured profile was found to have a higher maximum lift coefficient at all test conditions than the original airfoil. The recontoured airfoil showed less drag and nearly the same pitching moment characteristics as the original 6-series airfoil at all test conditions. The improvements found for the recontoured airfoil of the present study are similar to those found during previous investigations of recontoured 6-series airfoils with less camber.

Hicks, R. M.↗

Airloads research study. Volume 2: Airload coefficients derived from wind tunnel data

The development of B-1 aircraft rigid wind tunnel data for use in subsequent tasks of the Airloads Research Study is described. Data from the Rockwell International external structural loads data bank were used to generate coefficients of rigid airload shear, bending moment, and torsion at specific component reference stations or both symmetric and asymmetric loadings. Component stations include the movable wing, horizontal and vertical stabilizers, and forward and aft fuselages. The coefficient data cover a Mach number range from 0.7 to 2.2 for a wing sweep position of 67.5 degree.

Bartlett, M. D.↗

Method to estimate drag coefficient at the air/ice interface over drifting open pack ice from remotely sensed data

A knowledge in near real time, of the surface drag coefficient for drifting pack ice is vital for predicting its motions. And since this is not routinely available from measurements it must be replaced by estimates. Hence, a method for estimating this variable, as well as the drag coefficient at the water/ice interface and the ice thickness, for drifting open pack ice was developed. These estimates were derived from three-day sequences of LANDSAT-1 MSS images and surface weather charts and from the observed minima and maxima of these variables. The method was tested with four data sets in the southeastern Beaufort sea. Acceptable results were obtained for three data sets. Routine application of the method depends on the availability of data from an all-weather air or spaceborne remote sensing system, producing images with high geometric fidelity and high resolution.

Feldman, U.↗

Internal heat transfer coefficients of porous metals

The internal heat transfer coefficients of porous metals have been experimentally determined in order to develop correlations between approximately defined Nusselt and Reynolds numbers. Scaled-up models of porous materials, and actual porous metal specimens, were subjected to countercurrent heat and mass transfer boundary conditions. Solid and gas phase temperatures were measured for both the scaled-up models and the actual porous metal specimens. On the basis of these measurements, the average internal heat transfer coefficient was evaluated, and a correlation between the Nusselt and Reynolds numbers was derived.

Kar, K. K.↗

Inference of the aerosol Angstrom coefficient from SAGE short-wavelength data

SAGE four-channel transmission profiles are inverted to retrieve the extinction profiles from which the aerosol Angstrom coefficient alpha is obtained. The procedure allows one to check the influence of the NO2 absorption profile, which is small below 25 km. The results compare well with those obtained by a completely different procedure at NASA Langley Research Center, and the main features of the alpha profiles seem to be significant, even considering the rather large error bars. The relation between the retrieved Angstrom coefficient, the particle effective radius and the asymmetry factor is considered.

Lenoble, J.↗

Calculations of radar backscattering coefficient of vegetation-covered soils

The present investigation has the objective to develop a simple 'user's' model for simulating the measured radar backscattering coefficients from vegetation-covered fields in conjunction with the data obtained by Jackson et al. (1980, 1982). The theoretical work reported by Fung and Eom (1981) provides the basis for the model. Certain modifications are related to a consideration of the effect of a vegetation canopy. The first part of the model is concerned with a description of scatter from rough bare soil, while the second part takes into account the effect of a vegetation cover. It is shown that the measured angular distribution of the backscattering coefficient of vegetation-covered fields can be satisfactory reproduced by using the developed model.

Mo, T.↗

Comparison of various drag coefficient expansions using polynomials and splines

The longitudinal differential equation of motion has been used to investigate various aerodynamic expansion techniques. The total drag coefficient was expanded using conventional polynomials and splines with and without floating knot locations. This paper discusses the various techniques and approaches, compares results obtained from simultaneously fitting four separate flights (time vs distance measurements) and outlines the potential advantages and/or disadvantages of the various aerodynamic expansion techniques. It is believed that this is the first time splines have been used in the aerodynamic coefficient estimation process and that these results and techniques are germane to other applications.

Sabot, S. M.↗

Analysis for leakage and rotordynamic coefficients of surface-roughened tapered annular gas seals

The present analysis calculates the leakage and rotor-dynamic coefficients for tapered annular gas seals whose rotor and stator have been subjected to different surface roughness treatments. The analysis is demonstrated for the effects of changes in the Space Shuttle Main Engine High Pressure Oxygen Turbopump's turbine interstage seal length, taper, clearance, and fluid prerotation. It is noted that changes in these parameters generally resulted in major changes in leakage and rotordynamic coefficients.

Nelson, C. C.↗

Identification of dynamic coefficients of annular turbulent seals

An identification procedure to determine dynamic coefficients of annular turbulent seals in turbopumps is presented. Measurements were carried out at a built test rig with two symmetrical arranged seals. A rigid rotating shaft is surrounded by an elastically supported housing, which is excited by impact forces. The relative radial motion between the rotating parts and the housing, respectively between the seal surfaces, is measured by displacement pick-ups and from the time signals complex frequency response functions can be calculated. Finally an analytical model, depending on the seal parameters, is fitted to the measured data, to find the dynamic coefficients.

Nordmann, R.↗

Theory versus experiment for the rotordynamic coefficients of annular gas seals. Part 1: Test facility and apparatus

A facility and apparatus are described for determining the rotordynamic coefficients and leakage characteristics of annular gas seals. The apparatus has a current top speed of 8000 cpm with a nominal seal diameter of 15.24 cmn (6 in). The air supply unit yields a seal pressure ratio of approximately 7. An external shaker is used to excite the test rotor. The capability to independently calculate all rotordynamic coefficients at a given operating condition with one excitation frequency are discussed.

Childs, D. W.↗

Transient technique for measuring heat transfer coefficients on stator airfoils in a jet engine environment

A transient technique was used to measure heat transfer coefficients on stator airfoils in a high-temperature annular cascade at real engine conditions. The transient response of thin film thermocouples on the airfoil surface to step changes in the gas stream temperature was used to determine these coefficients. In addition, gardon gages and paired thermocouples were also utilized to measure heat flux on the airfoil pressure surface at steady state conditions. The tests were conducted at exit gas stream Reynolds numbers of one-half to 1.9 million based on true chord. The results from the transient technique show good comparison with the steady-state results in both trend and magnitude. In addition, comparison is made with the STAN5 boundary layer code and shows good comparison with the trends. However, the magnitude of the experimental data is consistently higher than the analysis.

Gladden, H. J.↗

A comparison of experimental and theoretical results for rotordynamic coefficients of four annular gas seals

The test facility and initial test program developed to experimentally measure the fluid forces induced by annular gas seals is described. A comparison of theoretically predicted and experimentally obtained data for smooth and honeycomb seals is provided. And a comparison of experimental data from the tests of three smooth-rotor/smooth-stator seals is provided. The leakage of the working fluid through the seal, the pressure gradient along the seal length, entrance pressure-loss data, and rotordynamic coefficients provide a basis for comparison. A short discussion on seal theory is included, and various rotordynamic coefficient identification schemes are described.

Childs, D. W.↗

Spatial dependence of the local diffusion coefficient measured upstream of the November 12, 1978 interplanetary traveling shock

Characteristics of wuprathermal particles accelerated by quasi-parallel interplanetary traveling shocks have been generally explained in terms of a first order Fermi mechanism. Such models require diffusive scattering of particles upstream of the shock. This scattering is characterized by a local diffusion coefficient, kappa, which is determined by the local power density of waves in the upstream region. The dependence of the diffusion coefficient of suprathermal upstream protons on distance from the November 12, 1978 interplanetary traveling shock using a different approach is studied. Unlike previous studies this method, which is based on measurements of particle streaming and intensity gradients, does not rely on predictions. The local spatial variations of Kappa upstream of the November 12, 1978 shock have been chosen for study because the characteristics of this quasi-parallel shock have been extensively studied, and also because of its favorable geometry (i.e. B field nearly radial).

Gloeckler, G.↗

Relationship between phase difference and coefficient of restitution during low velocity foreign object transverse damage of composite plates

This work discusses a model to correlate the coefficient of restitution of low velocity transverse impacts of graphite-epoxy laminates with the residual deformation or central deflection at the end of the impact event. It is assumed that the energy absorbed by the target can be calibrated in terms of residual deflection, and thereby in terms of phase difference between the occurrence of impact force and central deflection to their maximas. Analysis was modeled on the basis of the experience from impact tests. Predictions are compared with the test results of impacted circular and flat plates. Experimentally measured values of coefficient of restitution and phase difference agreed well with the predicted relationship between them.

Lal, K. M.↗

Analysis of segregation trends observed in iron meteorites using measured distribution coefficients

Fe-Ni alloys of meteoritic composition were solidified by a plane front solidification technique. Distribution coefficients of Ni, P, Ir, Ge, and Cu were determined from the composition data of the plane front solidified alloys. Equations that describe the distribution coefficients (P, Ni, Ir, Ge, and Cu) as a function of S and P content as well as S to P ratio were used to calculate solute partitioning between solid and liquid during the solidification of IIAB, IIIAB, and IVA parent bodies. The calculated P versus Ni, Ir versus Ni, Ge versus Ni, and Cu versus Ni trends are in good agreement with the observed meteorite data for each chemical group. It is concluded that each chemical group formed as a single molten pool in a parent body and that solute partitioning that occurred during solidification is responsible for the observed compositional trends within a single meteorite group.

Sellamuthu, R.↗

Transient technique for measuring heat transfer coefficients on stator airfoils in a jet engine environment

A transient technique was used to measure heat transfer coefficients on stator airfoils in a high-temperature annular cascade at real engine conditions. The transient response of thin film thermocouples on the airfoil surface to step changes in the gas stream temperature was used to determine these coefficients. In addition, gardon gages and paired thermocouples were also utilized to measure heat flux on the airfoil pressure surface at steady state conditions. The tests were conducted at exit gas stream Reynolds numbers of one-half to 1.9 million based on true chord. The results from the transient technique show good comparison with the steady-state results in both trend and magnitude. In addition, comparison is made with the STAN5 boundary layer code and shows good comparison with the trends. However, the magnitude of the experimental data is consistently higher than the analysis.

Gladden, H. J.↗