Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Multidrug Efflux Pumps and the Two-Faced Janus of Substrates and Inhibitors

Antibiotics are miracle drugs that can cure infectious bacterial diseases. However, their utility is challenged by antibiotic resistant bacteria emerging in clinics and straining the modern medicine and our ways of life. Certain bacteria such as Gram-negative (Gram(- )) and Mycobacteriales species are intrinsically resistant to most clinical antibiotics and can further gain multidrug resistance through mutations and plasmid acquisition. These species stand out by the presence of an additional external lipidic membranes (the outer membrane, OM) that are composed of unique glycolipids. Although formidable, the OM is a passive permeability barrier that can reduce penetration of antibiotics but cannot affect intracellular steady-state concentrations of drugs. The two-membrane envelopes are further reinforced by active efflux transporters that expel antibiotics from cells against their concentration gradients. The major mechanism of antibiotic resistance in Gram(-) pathogens is the active efflux of drugs, which acts synergistically with the low permeability barrier of the OM and other mutational and plasmid-borne mechanisms of antibiotic resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Frontal Polymerization of Dihydrofuran Comonomer Facilitates Thermoset Deconstruction

Frontal ring-opening metathesis polymerization (FROMP) is a rapid, low-energy manufacturing reaction that is useful for curing thermosetting materials. FROMP of dicyclopentadiene (DCPD) results in poly(dicyclopentadiene) (p(DCPD)), a tough thermoset with excellent mechanical performance and chemical stability. Like most thermosets, p(DCPD) cannot be reprocessed and is therefore difficult to recycle. Previous work demonstrated that the incorporation of a small quantity of cleavable units in the strand segments of p(DCPD) networks enables their deconstruction. Here, we report that a commercially available multifunctional comonomer, 2,3-dihydrofuran (DHF), both acts as a potent Grubbs catalyst inhibitor during FROMP and introduces acid cleavable units. The resulting materials retain high performance characteristics, including glass-transition temperatures ranging from 115 to 165 °C and ultimate strength ranging from 35 to 40 MPa. The addition of DHF above critical loading levels enables deconstructable thermosets. Here, we further demonstrate freeform three-dimensional (3D) printing of deconstructable thermosets via frontal polymerization.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Regioisomer-Specific Crystallization of Diglycidyl Ether of Bisphenol F Epoxy Resin

Diglycidyl ether of bisphenol F (DGEBF) is a common industrial epoxy resin, desired for its possible replacement of the bisphenol A (BPA) analogue DGEBA due to potential health hazards of BPA. During curing, crystallization of the DGEBF resin can cause inaccurate resin-to-hardener ratios, resulting in incomplete crosslinking; therefore, understanding the crystallization of DGEBF is important for proper industrial control of the material. Here, in this work, we utilized a combination of single-crystal x-ray diffraction, Raman spectroscopy, and 1 H-NMR to investigate the crystallization of DGEBF. We observed crystallization of two DGEBF regioisomers: ortho-ortho’-DGEBF and ortho-para’-DGEBF, and report their crystal structures. Notably, para-para’-DGEBF crystallization is not observed, indicating crystallization of this regioisomer does not occur under ambient conditions. Density functional theory calculations were performed to describe the phonon modes of the ortho-ortho’- and ortho-para’-DGEBF structures, corroborating Raman signatures for the respective isomers. Using a phonon mode analysis, we identify the presence of three specific optical vibrational modes at 631.3, 344.1, and 345.6 cm -1 that are unique to the para monomer. This work offers insights into the crystallization behavior of DGEBF resins under ambient conditions and may inform potential industrial application of this material.

Neu, Jennifer [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2023

Unexpected Thermomechanical Behavior of Off-Stoichiometry Epoxy/Amine Materials

Recent studies on off-stoichiometric thermosets reveal unique viscoelastic behavior derived from increased free volume and physical interactions between chain ends. To understand structural characteristics arising from cure and its effect on properties, we developed a Monte Carlo model based on step-growth polymerization. Our model accurately predicted structure–property trends for a two-component system of EPON 828 (EPON) and ethylenediamine. A second epoxy monomer, D.E.R. 732 (DER), was investigated to modulate T g . Binary mixtures of EPON and DER in off-stoichiometric, amine-rich formulations resulted in nonlinear evolution of thermomechanical properties with respect to initial formulation stoichiometry. Modifying our model with kinetic parameters allowing for differential epoxide/amine reaction kinetics only partially accounted for trends in T g , suggesting that spatiotemporal contributions-not captured by our model-were significant determinants of material properties compared to polymer architecture for three-component systems. Here these findings underpin the importance of spatial awareness in modeling to inform the development of dynamic thermosets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Differences in the Interfacial Mechanical Properties of Thiophosphate and Argyrodite Solid Electrolytes and Their Composites

Interfacial mechanics are a significant contributor to the performance and degradation of solid-state batteries. Spatially resolved measurements of interfacial properties are extremely important to effectively model and understand the electrochemical behavior. Herein, we report the interfacial properties of thiophosphate (Li 3 PS 4 )- and argyrodite (Li 6 PS 5 Cl)-type solid electrolytes. Using atomic force microscopy, we showcase the differences in the surface morphology as well as adhesion of these materials. Additionally we investigate solvent-less processing of hybrid electrolytes using UV-assisted curing. Physical, chemical, and structural characterizations of the materials highlight the differences in the surface morphology, chemical makeup, and distribution of the inorganic phases between the argyrodite and thiophosphate solid electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plastic Scintillators via Rapid Photoinitiated Cationic Polymerization of Vinyltoluene

Cationic photopolymerization is applied for the rapid curing of a vinyltoluene and fluorophore solution into an efficient plastic scintillator. A hard solid is obtained via UV light-initiated polymerization of vinyltoluene, diaryliodonium salt, 9,9-dimethyl-2-phenylfluorene (PhF), and 9,9-dimethyl-2,7-distyrlfluorene (SFS) at ambient conditions with high conversion rates under a range of cationic photoinitiator concentrations, fluorophore concentrations, and light intensities. Insight into photopolymerization kinetics via photo differential scanning calorimetry (photoDSC) revealed photocuring time scales similar to those achieved in a commercial 3D printing resin. Furthermore, scintillator samples prepared cationically performed well compared to samples of equivalent compositions prepared by a lengthy thermally initiated radical polymerization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Diphenyl Content on Viscoelasticity of Poly(dimethyl- co -diphenyl)siloxane Melt and Network

Polydimethylsiloxane (PDMS) is one of the most widely used polymeric materials for sealants, adhesives, lubricants, and thermal as well as electrical insulation. At low temperatures, however, PDMS is subject to crystallization that can cause deterioration in mechanical function. A common way to suppress such crystallization is through the incorporation of phenylsiloxane into the backbone of polysiloxane. Nevertheless, the introduction of phenyl components, even in small quantities, could potentially change the properties of the siloxane in a significant way. In this work, a series of mechanical tests and finite element simulations were performed to study the macroscale viscoelasticity of two poly(dimethyl-co-diphenyl)siloxane formulations in order to understand the effects of a few percent diphenyl contents on the viscoelasticity of the polysiloxane material. Here, we utilized the small-angle X-ray scattering to investigate the microscopic structures of the copolymers and broadband dielectric spectroscopy and rheology to probe the chain dynamics at the microscale. The results of these characterizations were used to inform the finite element simulations. We found that the degree of cross-linking does not significantly alter the microstructure but can profoundly affect the viscoelastic response of the copolymer networks. The corresponding hysteretic behavior is interpreted in terms of reptation-like motion and relaxation of the effective free chains in the cured polymer network. The relaxation of the copolymer chains is slowed significantly by even a small increase in the molar ratio of the diphenyl component.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thermally Induced Structural Transitions in Epoxy Thermoset Polymer Networks and Their Spectroscopic Responses

The polymer network structure of epoxy thermosets plays a significant role in its final material properties. However, the effects of mild thermal exposure on these network structures are poorly studied. In this work, wide-angle X-ray scattering was used to investigate the polymer network structure of two epoxy thermosets: homopolymerized bisphenol A (BPA) epoxy resin and BPA epoxy resin cured with a polyether amine hardener (BPA/T-403). Using density functional theory and wide-angle X-ray scattering, insights into the polymer network structure were obtained. Diffraction features were determined to originate from hardener-to-hardener molecular distance, perpendicular π–π stacking of aromatic p-phenylene rings, and the average carbon–carbon distance in the polymer. Thermal exposure was found to permanently alter these structural features for both thermosets, with an increase in the π–π stacking distance. Homopolymerized BPA had an additional decrease in the hardener-to-hardener distance. These structural alterations were found to be detectable using Fourier transform infrared spectroscopy and Raman spectroscopy, with changes in the hardener-to-hardener distance having the largest variations in the resulting spectra specifically at the aromatic and ether frequencies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chemically and Mechanically Recyclable Vitrimers from Carbon Dioxide-Based Polycarbonates

Designing thermoset materials with dynamic crosslinks is an important strategy to mitigate rising global carbon dioxide emission levels. The development of polymers from sustainable feedstocks, with efficient manufacturing methods, for high-value applications, and with circular end-of-use solutions is essential for advancing material technologies. One approach involves exploiting carbon dioxide itself as feedstock to create high performance, sustainable materials, by enchaining 50 mol% CO2 via copolymerization with epoxides to yield polycarbonates. This work describes the synthesis, end-functionalization, and curing of poly(propylene carbonate) (PPC) and poly(cyclohexene carbonate) (PCHC) into beta-hydroxy ester vitrimers. These vitrimers demonstrate the ability to be mechanically reprocessed up to 3 times with retention of the material’s properties through dynamic transesterification exchange reactions. The polycarbonate vitrimers with gel fractions exceeding 90 % exhibit high tensile strength (> 50 MPa) and Young’s modulus (> 2 GPa), achieved by varying repeat unit structure in the polymer backbone from the low Tg PPC to the more rigid high Tg PCHC structures. Owing to an entropically favorable chain back-biting mechanism, the network chains can be cleaved and depolymerized into cyclic small molecules. In the case of PCHC, this process enables repolymerization back to polycarbonates with 69 wt.% CO2 retention through life-cycles. The promising mechanical performance and recyclability of these CO2-based polycarbonate vitrimers indicate their potential for sustainable, high-performance materials, paving the way for future innovations in circular polymer technologies and carbon capture utilization.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Adhesion of Self-Complementary, Sinusoidal Surfaces Fabricated Using Two-Photon Polymerization

Microscale, pick-and-place assembly is a non-lithographic assembly method poised to impact diverse fields including flexible electronics, microfluidics and robotics. However, a major technological challenge is the need to deterministically control adhesion between parts. Here, switchable adhesion involving 3D-printed, self-complementary surfaces is demonstrated. Mechanical properties of metasurfaces pressed against flat, rigid substrates are modeled using finite element methods. A series of flat slabs and metastructured slabs with 2D sinusoidal surfaces are printed using two-photon polymerization (2PP) of a shape-memory resin. The surface frequency of featured slabs was varied between $3.\bar3$ mm −1 and $26.\bar6$ mm −1 with similar amplitudes. Adhesion between printed metasurfaces and glass and between printed, self-complementary metasurfaces is studied above and below the cured resin’s glass transition temperature (∼45 °C). Simple heating of adhering surfaces to above 60 °C lowers adhesion, and compression of surfaces while above the glass transition temperature followed by cooling to room temperature elevates adhesion. The nominal adhesive strength between printed, self-complementary surfaces, as determined by the maximum observable pull-off stress, exceeds 3 MPa. Further tailoring complementary surfaces for adhesion control may facilitate microscale disassembly for recovery of components or precious metals.

amorphous materials↗
DOE OSTI2026

Self-Assembly Driven Microlithography via Near-Infrared Light Activation

Current vat photopolymerization (VP) relies on UV or visible light to start the rapid crosslinking of liquid photocurable resins into 3D-printed structures. Here, we develop a self-assembly-driven photopatterning approach to photothermally generate polymeric solids by combining thermoplasmonic nanoparticles and thermoresponsive polymers, in which near-infrared (NIR) light activates thermoplasmonic heating of nanoparticles, triggering the irreversible self-assembly of thermoresponsive polymers into insoluble mesoglobules. A small amount of thermal initiator and crosslinker leads to irreversible self-assembly of polymer nanocomposites. NIR light offers deeper penetration and reduced scattering compared to UV, enabling more uniform curing of thicker or filled materials and expanded process control for composites or opaque systems. Thermoplasmonic heat generation is achieved using surface-modified gold nanorods (AuNRs) with a longitudinal localized surface plasmon resonance peak in the NIR region. Key variables such as polymer composition, molecular weight, physical interactions at the nanoparticle–polymer interface, which can be tuned by surface functionalization, AuNR concentration, and pH can be used to tailor the assembly behavior of these systems, including photothermal effect, flocculation, and cloud point temperature, and the mechanical properties of the final structures. Collectively, these results highlight a platform for photothermally-driven microlithography of polymer solids with diverse, tunable macroscopic properties, enabled by low-energy NIR light-activated self-assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dual-Wavelength Simultaneous Patterning of Degradable Thermoset Supports for One-Pot Embedded 3D Printing

Vat photopolymerization (VP) techniques have enabled the fabrication of complex geometries while balancing high precision and fast processing times. 3D printed objects are traditionally built layer-by-layer with newly cured layers being structurally supported by previous ones. Fabricating unsupported features such as overhangs and arches risks misalignment and sagging, limiting the range of accessible designs. To overcome this issue, support structures are fabricated along with the primary object as temporary scaffolds that provide stability and conserve print fidelity. For VP specifically, patterning dissolvable sacrificial supports is attractive to avoid manual removal after printing. In this study, we demonstrate a base-degradable thermoset to pattern print supports in a one-pot formulation along with the primary structural material. Efficient printing is enabled using a dual-wavelength negative imaging (DWNI) DLP printer that patterns the degradable thermoset with visible light and the permanent network with UV light, which are simultaneously projected using a single digital micromirror device (DMD). Printed objects undergo thermal postprocessing to enhance the final conversion of the primary material, after which thermoset supports are degraded in a basic, aqueous solution. This approach provides a robust method for the dual-wavelength patterning of sacrificial thermoset supports, broadening the range of accessible 3D printable materials and geometries.

3D printing↗
DOE OSTI2023

Identification of and Structural Insights into Hit Compounds Targeting N -Myristoyltransferase for Cryptosporidium Drug Development

Each year, approximately 50,000 children under 5 die as a result of diarrhea caused by Cryptosporidium parvum, a protozoan parasite. There are currently no effective drugs or vaccines available to cure or prevent Cryptosporidium infection, and there are limited tools for identifying and validating targets for drug or vaccine development. We previously reported a high throughput screening (HTS) of a large compound library against Plasmodium N-myristoyltransferase (NMT), a validated drug target in multiple protozoan parasite species. To identify molecules that could be effective against Cryptosporidium, we counter-screened hits from the Plasmodium NMT HTS against Cryptosporidium NMT. We identified two potential hit compounds and validated them against CpNMT to determine if NMT might be an attractive drug target also for Cryptosporidium. We tested the compounds against Cryptosporidium using both cell-based and NMT enzymatic assays. We then determined the crystal structure of CpNMT bound to Myristoyl-Coenzyme A (MyrCoA) and structures of ternary complexes with MyrCoA and the hit compounds to identify the ligand binding modes. The binding site architectures display different conformational states in the presence of the two inhibitors and provide a basis for rational design of selective inhibitors.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Hierarchical Epoxy Structures via Tunable Polymerization-Induced Phase Separation Combined with Additive Manufacturing

Polymerization-induced phase separation (PIPS) allows for the control of thermoset morphologies and properties, enabling the tuning of domain sizes and thermomechanical response. However, its use in generating substructural features in additively manufactured materials has been limited. In this work, we combine epoxy PIPS with UV curable acrylate and rheological modifiers to print nano- to macro-phase separating materials via a two-step, dual-cure approach. This method enables direct ink write printing of hierarchical structures with both controlled morphologies through phase separation and macroscale architecture through print design. We find that formulations for phase-separating materials require judicious incorporation of additives to enable printability and to provide sufficient green strength. Atomic force microscopy-nano infrared mapping reveals tunable, reticulated nano- to micron-scale domains of the resultant multiphase materials and their morphology changes due to additives, resulting in alterations to thermomechanical and tensile properties. Shape memory behavior is also demonstrated through multimaterial additive manufacturing of epoxies with functionally graded internal morphology using active mixing techniques, highlighting this method’s ability to fabricate complex architectures with controlled morphologies and thermomechanical response.

Van Meter, Kylie E [Organic Materials Science, San↗
DOE OSTI2020

Transient Lattice Response upon Photoexcitation in CuInSe 2 Nanocrystals with Organic or Inorganic Surface Passivation

CuInSe 2 nanocrystals offer promise for optoelectronics including thin-film photovoltaics and printed electronics. Additive manufacturing methods such as photonic curing controllably sinter particles into quasi-continuous films and offer improved device performance. To gain understanding of nanocrystal response under such processing conditions, we investigate impacts of photoexcitation on colloidal nanocrystal lattices via time-resolved X-ray diffraction. We probe three sizes of particles and two capping ligands (oleylamine and inorganic S 2- ) to evaluate resultant crystal lattice temperature, phase stability, and thermal dissipation. Elevated fluences produce heating and loss of crystallinity, the onset of which exhibits particle size dependence. We find size-dependent recrystallization and cooling lifetimes ranging from 90 to 200 ps with additional slower cooling on the nanosecond time scale. Sulfide-capped nanocrystals show faster recrystallization and cooling compared to oleylamine-capped nanocrystals. Using these lifetimes, we find interfacial thermal conductivities from 3 to 28 MW/(m 2 K), demonstrating that ligand identity strongly influences thermal dissipation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Recycling Epoxy by Vitrimerization: Influence of an Initial Thermoset Chemical Structure

Epoxy/anhydride cured thermosets are widely used in aerospace and wind energy structures. Recycling the enormous amounts of epoxy thermoset waste remains a global challenge. Vitrimerization, a practical, low-cost, eco-friendly and scalable method was developed for closed-loop recycling of the crosslinked epoxy by converting the permanent network into a vitrimer type dynamic network. Here we study the effect of virgin epoxy network properties on network reforming efficiency and the activation energy of the dynamic network by varying the epoxy/anhydride ratio. The results point out that the permanent network crosslink density and glass transition temperature have a more pronounced effect on vitrimerization efficiency by comparison with the concentration of free hydroxyl groups in the system. Furthermore, the result can be potentially used to better control vitrimerization efficiency in recycling epoxy thermoset polymers and tailor the vitrimerized products properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Topology-Informed Design Rules for Deconstructable Thermoset Copolymer Networks

Existing models of thermoset deconstruction facilitated by incorporating cleavable comonomers rely on a mean-field reverse gel point paradigm, which predicts network dissolution once cleavable bonds reach a critical stoichiometric threshold, but does not account for where those bonds reside within the network architecture. Using reactive coarse-grained molecular dynamics simulations coupled with graph-theoretic analysis, we extend this stoichiometric picture to show that deconstructability is governed by the curing-imprinted network topology rather than stoichiometry alone. This topological organization is hierarchical: at the local scale, the elastic effectiveness of cross-link junctions determines which cross-links constitute the load-bearing scaffold; at the mesoscale, the cross-linking rate kinetically templates that scaffold into topologically modular communities─densely cross-linked clusters connected by sparse bridging strands that sustain network connectivity. Using betweenness centrality to identify nodes that disproportionately lie on intercommunity shortest paths, we demonstrate that effective deconstruction of the network into macromolecular fragments requires cleavable comonomers to intercept these high-centrality bridging strands. We further find that under uniform, disassortative comonomer incorporation, this topological requirement provides a mechanistic basis for extending the reverse gel point to incorporate network topology. We also show that modularity imposes a fundamental limit on fragment uniformity that persists even when the centrality requirement is met. Finally, we demonstrate that chain stiffness provides a nearly independent lever to suppress mechanically redundant cross-links and raise the glass transition temperature without significantly altering the deconstruction outcome. Together, these findings reframe the thermoset design space around network topology and provide actionable guidelines for engineering thermoset copolymers with predictable deconstructability and targeted thermomechanical performance.

coarse-grained molecular dynamics↗
DOE OSTI2020

The molecular basis of pyrazinamide activity on Mycobacterium tuberculosis PanD

Pyrazinamide has been a mainstay in the multidrug regimens used to treat tuberculosis. It is active against the persistent, non-replicating mycobacteria responsible for the protracted therapy required to cure tuberculosis. Pyrazinamide is a pro-drug that is converted into pyrazinoic acid (POA) by pyrazinamidase, however, the exact target of the drug has been difficult to determine. Here we show the enzyme PanD binds POA in its active site in a manner consistent with competitive inhibition. The active site is not directly accessible to the inhibitor, suggesting the protein must undergo a conformational change to bind the inhibitor. This is consistent with the slow binding kinetics we determined for POA. Drug-resistant mutations cluster near loops that lay on top of the active site. These resistant mutants show reduced affinity and residence time of POA consistent with a model where resistance occurs by destabilizing the closed conformation of the active site.

59 BASIC BIOLOGICAL SCIENCES↗