Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A Theoretical Study of Doping Evolution of Phonons in High-Temperature Cuprate Superconductors

Hole-doped high-temperature copper oxide-based superconductors (cuprates) exhibit complex phase diagrams where electronic orders like a charge density wave (CDW) and superconductivity (SC) appear at low temperatures. The origins of these electronic orders are still open questions due to their complex interplay and correlated nature. These electronic orders can modify the phonons in the system, which has also been experimentally found in several cuprates as a softening in the phonon frequency at the CDW vector. Recent experiments have revealed that the softening in phonons in cuprates due to CDW shows intriguing behavior with increasing hole doping. Hole doping can also change the underlying Fermi surface. Therefore, it is an interesting question whether the doping-induced change in the Fermi surface can affect the softening of phonons, which in turn can reveal the nature of the electronic orders present in the system. In this work, we investigate this question by studying the softening of phonons in the presence of CDW and SC within a perturbative approach developed in an earlier work. We compare the results obtained within the working model to some experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size-specific composition of aerosols in the El Chichon volcanic cloud

A NASA U-2 research aircraft flew sampling missions in April, May, July, November, and December 1982 aimed at obtaining in situ data in the stratospheric cloud produced from the March-April 1982 El Chichon eruptions. Post flight analyses provided information on the aerosol composition and morphology. The particles ranged in size from smaller than 0.05 m to larger than 20 m diameter and were quite complex in composition. In the April, May, and July samples the aerosol mass was dominated by magmatic and lithic particles larger than about 3 m. The submicron particles consisted largely of sulfuric acid. Halite particles, believed to be related to a salt dome beneath El Chichon, were collected in the stratosphere in April and May. On the July 23 flight, copper-zinc oxide particles were collected. In July, November, and December, in addition to the volcanic ash and acid particles, carbon-rich particles smaller than about 0.1 m aerodynamic diameter were abundant.

Woods, D. C.↗

A Hydrazine Leak Sensor Based on Chemically Reactive Thermistors

Leaks in the hydrazine supply system of the Shuttle APU can result in hydrazine ignition and fire in the aft compartment of the Shuttle. Indication of the location of a leak could provide valuable information required for operational decisions. WSTF has developed a small, single use sensor for detection of hydrazine leaks. The sensor is composed of a thermistor bead coated with copper(II) oxide (CuO) dispersed in a clay or alumina binder. The CuO-coated thermistor is one of a pair of closely located thermistors, the other being a reference. On exposure to hydrazine the CuO reacts exothermically with the hydrazine and increases the temperature of the coated-thermistor by several degrees. The temperature rise is sensed by a resistive bridge circuit and an alarm registered by data acquisition software. Responses of this sensor to humidity changes, hydrazine concentration, binder characteristics, distance from a liquid leak, and ambient pressure levels as well as application of this sensor concept to other fluids are presented.

Davis, Dennis D.↗

NiAl Coatings Investigated for Use in Reusable Launch Vehicles

As part of its major investment in the area of advanced space transportation, NASA is developing new technologies for use in the second- and third-generation designs of reusable launch vehicles. Among the prototype rocket engines being considered for these launch vehicles are those designed to use liquid hydrogen as the fuel and liquid oxygen as the oxidizer. Advanced copper alloys, such as copper-chromium-niobium (Cu-8(at.%)Cr- 4(at.%)Nb, also referred to as GRCop-84), which was invented at the NASA Glenn Research Center, are being considered for use as liner materials in the combustion chambers and nozzle ramps of these engines. However, previous experience has shown that, in rocket engines using liquid hydrogen and liquid oxygen, copper alloys are subject to a process called blanching, where the material undergoes environmental attack under the action of the combustion gases. In addition, the copper alloy liners undergo thermomechanical fatigue, which often results in an initially square cooling channel deforming into a dog-house shape. Clearly, there is an urgent need to develop new coatings to protect copper liners from environmental attack inside rocket chambers and to lower the temperature of the liners to reduce the probability of deformation and failure by thermomechanical fatigue.

Raj, Sai V.↗

Energy Gaps in the Failed High-Tc Superconductor La1.875Ba0.125CuO4

A central issue in high-T{sub c} superconductivity is the nature of the normal-state gap (pseudogap) in the underdoped regime and its relationship with superconductivity. Despite persistent efforts, theoretical ideas for the pseudogap evolve around fluctuating superconductivity, competing order, and spectral weight suppression due to many-body effects. Recently, although some experiments in the superconducting state indicate a distinction between the superconducting gap and pseudogap, others in the normal state, either by extrapolation from high-temperature data or directly from La{sub 1.875)Ba{sub 0.125}CuO{sub 4} (LBCO-1/8) at low temperature, suggest the ground-state pseudogap is a single gap of d-wave form. Here, we report angle-resolved photoemission data from LBCO-1/8, collected with improved experimental conditions, that reveal the ground-state pseudogap has a pronounced deviation from the simple d-wave form. It contains two distinct components: a d-waev component within an extended region around the node and the other abruptly enhanced close to the antinode, pointing to a dual nature of the pseudogap in this failed high-T{sub c} superconductor that involves a possible precursor-pairing energy scale around the node and another of different but unknown origin near the antinode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temporal stability of Y Ba Cu O nano Josephson junctions from ion irradiation

We investigate the temporal stability of YBa2Cu3O7 Josephson junctions created by ion irradiation through a nano-scale implant mask fabricated using electron beam lithography and reactive ion etching. A comparison of current-voltage characteristics measured for junctions after fabrication and eight years of storage at room temperature show a slight decrease in critical current and increase in normal state resistance consistent with broadening of the weaklink from diffusion of defects. Shapiro step measurements performed 8 years after fabrication reveal that device uniformity is maintained and is strong evidence that these devices have excellent temporal stability for applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrode designs for high energy density, efficiency, and capacity in rechargeable alkaline batteries

A secondary alkaline battery includes an anode, a cathode, and an electrolyte. The cathode includes a current collector, a cathode mixture in electrical contact with the current collector. The cathode mixture comprises: manganese oxide, a copper compound comprising copper, a salt of copper, an alloy thereof, or any combination thereof, a bismuth compound comprising bismuth, a salt of bismuth, or any combination thereof, and a conductive carbon. The secondary alkaline battery can also include a first composition in contact with the current collector and disposed between the current collector and the cathode mixture that includes copper, a salt of copper, an alloy thereof, or a combination thereof.

Yadav, Gautam G.↗

Preparation and characterization of Cu{sub 2}O-TiO{sub 2}: Efficient photocatalytic degradation of methylene blue

A series of copper-deposited titania were prepared by photoreduction method under irradiation with a 125-W high-pressure mercury lamp. From XPS and AES results, the deposited-copper formed Ti-O-Cu bond on the surface of TiO{sub 2}, and the Cu species on the surface of copper-deposited TiO{sub 2} can be identified as Cu(I). The photocatalytic degradation activity of methylene blue for the Cu{sub 2}O-TiO{sub 2} series increased with increasing Cu{sub 2}O-deposited content, and then decreased. The highest photocatalytic degradation activity of methylene blue was obtained for 0.16% Cu{sub 2}O-TiO{sub 2}. When copper-deposited content reached to 0.32%, the photocatalytic activity was lower than that of pure TiO{sub 2}. It is shown that Cu{sub 2}O on the surface of TiO{sub 2} can trap electrons from the TiO{sub 2} conduction band, and the electrons trapped on the Cu{sub 2}O-TiO{sub 2} site are subsequently transferred to the surrounding adsorbed O{sub 2}, thereby avoiding electron-hole recombination, and enhancing the photocatalytic activity. Excess copper loading may screen the photocatalyst from the UV source, so the photocatalytic activity diminishes with increasing Cu{sub 2}O.

36 MATERIALS SCIENCE↗

Shape controlled synthesis of Cu{sub 2}O and its catalytic application to synthesize amorphous carbon nanofibers

Octahedral Cu{sub 2}O particles and Cu{sub 2}O nanowires were synthesized by a simple solution-phase route using N{sub 2}H{sub 4}.H{sub 2}O as reducing agent at room temperature. Amorphous carbon nanofibers were synthesized using octahedral Cu{sub 2}O particles and an acetylene gas source at atmospheric pressure. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis. SEM and TEM images indicated that most of the obtained octahedral Cu{sub 2}O particles had an edge length of 400-700 nm. The obtained nanowires had uniform diameters of about 15 nm, and the length of the nanowires ranged from 5 to 10 {mu}m. The XRD result revealed the amorphous feature of the nanofibers. IR spectrum revealed that the nanofibers consist of -CH, -CH{sub 2,} -C=C- and -CH{sub 3} groups. The concentrations of N{sub 2}H{sub 4}.H{sub 2}O and NaOH played important roles in controlling the geometric shape of the Cu{sub 2}O.

36 MATERIALS SCIENCE↗

High pressure induced coordination evolution in chain compound Li{sub 2}CuO{sub 2}

Using diamond anvil cell technique with angle dispersive X-ray diffraction (ADXD) of synchrotron radiation and electrical conductivity measurements, we have observed that CuO{sub 2} chain compound Li{sub 2}CuO{sub 2} transforms from ambient orthorhombic symmetry into a new phase at above 5.4 GPa and room temperature. The new phase was found to be of monoclinic structure with an increased oxygen coordination number of Cu{sup 2+} from four at ambient to six at high pressure that provides a structural basis of the evolution of principle physical properties. The high pressure phase of Li{sub 2}CuO{sub 2} is discussed in line with the first principle calculations. - Graphical abstract: Li{sub 2}CuO{sub 2} undergoes a first-order transition from the ambient orthorhombic to a monoclinic phase at above 5.4 GPa with coordination change from four-square to six-octahedron.

36 MATERIALS SCIENCE↗

Kirkendall-effect-based growth of dendrite-shaped CuO hollow micro/nanostructures for lithium-ion battery anodes

Three-dimensional (3D) dendrite-shaped CuO hollow micro/nanostructures have been prepared via a Kirkendall-effect-based approach for the first time and have been demonstrated as a high-performance anode material for lithium-ion batteries. The as-prepared hollow structures were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and electrochemical properties. A CuO hollow structure composed of nanocubes outside and a dense film inside was selected as a typical example of the optimized design; it exhibited significantly improved cyclability at a current rate of 0.5 C, with the average Coulombic efficiency of {approx}97.0% and 57.9% retention of the discharge capacity of the second cycle after 50 cycles. The correlation between the structure features of the hollow CuO and their electrochemical behavior was discussed in detail. Smaller size of primary structure and larger internal space of electrode materials are crucial to better electrochemical performance. This work represents that Kirkendall effect is a promising method to fabricate excellent hollow electrode materials for Li-ion batteries. - Graphical abstract: SEM images of 3D dendrite-shaped CuO hollow micro/nanostructures prepared via a Kirkendall-effect-based approach have been shown. The as-prepared CuO electrode exhibited significantly improved cyclability for Li-ion batteries.

36 MATERIALS SCIENCE↗

From 2-D CuO nanosheets to 3-D hollow nanospheres: interface-assisted synthesis, surface photovoltage properties and photocatalytic activity

CuO hierarchical hollow nanostructures, assembled by nanosheets, were successfully prepared in n-octanol/aqueous liquid system through a microwave approach. Controlled experiments revealed that both bubble and interface play key roles in determining the self-assembly process of CuO hierarchical hollow nanostructures, and the morphology/size of building blocks and final products could be readily tuned by adjusting reaction parameters. Furthermore, a self-assembly mechanism of aggregation-then-growth process through bubble template was proposed for the formation of the hollow hierarchical architectures. Photocatalytic performance evidenced that the obtained CuO hierarchical hollow nanostructures possessed superior photocatalytic efficiency on RhB than that of non-hollow nanostructures, which could be easily demonstrated by SPS response about the separation and recombination situation of photogenerated charges. - Graphical abstract: From 2-D CuO nanosheets to 3-D hollow nanospheres: interface-assisted synthesis, surface photovoltage properties and photocatalytic activity. Various CuO architectures with different morphologies and sizes, including hierarchical hollow nanostructures were prepared through a synergic bubble-template and interface-assisted approach.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CuO-ZnO heterometallic hollow spheres: Morphology and defect structure

The Cu-ZnO hollow spheres, where CuO nanocrystals were dispersed in the shell of ZnO nanoparticals, were synthesized by using highly uniform and monodispersed Cu-embedded carbon spheres as sacrificial templates via a simple route under hydrothermal conditions. The morphology and structure of the spheres were characterized by FTIR, XRD, SEM, TEM and N{sub 2} adsorption-desorption. It was suggested that the OH and C=O groups in the surface of the Cu-embedded carbon spheres facilitated the adsorption of Zn{sup 2+} in the aqueous solution, giving rise to the final CuO-ZnO hollow structure after these Zn{sup 2+}-adsorbed spheres were calcined in air. Moreover, the photoluminescence (PL) study showed that the as-prepared CuO-ZnO hollow spheres and the annealed counterpart exhibited strong and dramatically weakened emissions, respectively. This remarkably different photoluminescent behavior afforded the evidence regarding the oxygen vacancy defects in the CuO-ZnO hollow spheres. - Graphical abstract: CuO-ZnO hollow spheres were obtained using Cu-embedded carbon spheres as template, and the photoluminescent spectra afforded the evidence regarding the oxygen vacancies in the hollow spheres. Highlights: Black-Right-Pointing-Pointer A approach was presented to prepare carbon spheres in a high yield. Black-Right-Pointing-Pointer The fabrication of CuO-ZnO hollow spheres was a simple route. Black-Right-Pointing-Pointer The photoluminescence afforded the evidence of the oxygen vacancies in the hollows. Black-Right-Pointing-Pointer The synthetic approach might be applicable to preparing other hollow structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Advance in SuperConducting Materials

Superconducting materials will transform the world's electrical infrastructure, saving billions of dollars once the technical details and installation are in place. At Los Alamos National Laboratory, they've developed a process to produce industrial quantities of high temperature superconducting tape. This material has no electrical resistance.

36 MATERIALS SCIENCE↗

The effect of composition, temperature and pressure on the oxidation state and coordination environment of copper in silicate melts

Copper is a redox variable element that may occur as Cu 0 , Cu + , and Cu 2+ in the Earth’s crust. The oxidation state will affect its partitioning between coexisting minerals, melts and fluids and hence its behaviour in magmatic processes. Copper bearing silicate glasses were quenched from melts with 23 synthetic compositions (19 CaO-Na 2 O-MgO-Al 2 O 3 -SiO 2 (CNMAS), two “granites” containing K 2 O ± H 2 O, and Fe-bearing “MORB” and “andesite”) equilibrated at oxygen fugacities (fO 2 ), expressed in log units relative to the fayalite-magnetite-quartz (FMQ) buffer, ranging from −0.7 to 14, temperatures from 900 to 1500 °C and pressures from 0 to 2.5 GPa. Cu K-edge X-ray absorption near edge structure (XANES) spectra were recorded from the glasses and a pre-edge feature in the XANES spectra was found to scale with the proportion of Cu + . Cu + /ΣCu (where ΣCu = Cu + + Cu 2+ ) was quantified by fitting the intensity of the pre-edge feature as a function of fO 2 to the thermodynamically expected relationship. Cu + /ΣCu was found to only weakly depend on melt composition, with more basic melts (e.g., basalts rather than granites) preferentially stabilising Cu 2+ . Increasing temperature stabilises Cu + , while increasing pressure had little effect on Cu + /ΣCu in CNMAS melts but preferentially stabilised Cu 2+ in granite melts. Cu + /ΣCu can be predicted in silicate melts by the empirical equation: log(Cu 2+ /Cu + ) = 0.25(ΔFMQ + 8.58 − 25050/T + 940P/T – 0.02P) − 4.73 + 5400/T + 1.99Λ + (280P – 90P2) where T is temperature in K, P is pressure in GPa and is the optical basicity of the composition. The effects of fO 2 , melt composition, temperature and pressure on Cu + /ΣCu indicate that Cu + will be the dominant oxidation state in terrestrial silicate melts (e.g., Cu + /ΣCu = 99% in an andesitic melt at 900 °C, 1 GPa and ΔFMQ = 1). The electron exchange reaction Cu 2+ + Fe 2+ → Cu + + Fe 3+ occurs on cooling and, given the abundance of Fe in natural melts, the oxidation state of Cu in natural glasses is unlikely to correspond to that in the original melt.

Copper↗