Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALORIMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Small-scale production of bespoke accelerated aging plutonium alloy

Here, this study demonstrates the 100 g scale manufacture of a plutonium alloy that ages at an accelerated rate. The resulting alloy ages six times faster than typical weapons-grade plutonium due to the addition of 238 Pu. As a major innovation, the process involved using a partial direct oxide reduction technique. This method was achieved by developing a new, complex geometry stirrer using additive manufacturing to reduce the 238Pu oxide and efficiently incorporate it into weapons-grade plutonium metal. The material was then purified by molten salt extraction and electrorefining before being alloyed with gallium. The alloy was then cold-rolled and annealed in a homogenization heat treatment. The resulting disk was characterized by metallography and differential scanning calorimetry, and the impurity content was determined using analytical chemistry techniques. The results show that a homogeneous delta phase plutonium alloy was achieved with expected microstructure and minimal impurities. This study was also successful in changing the plutonium isotopic composition by incorporating additional 238 Pu to accelerate the effects of radiation damage. This enables researchers to study long-term aging phenomena in a reduced time frame, thus avoiding the need for large-scale material production and circumventing the limitations of using naturally aged, archived plutonium.

Aging theory↗

Compatibility of molten plutonium with wrought and additively manufactured metal crucibles

Understanding plutonium’s interaction with metals is crucial for optimizing pyrochemical operations, nuclear fuel containment, and various actinide processing techniques. Traditionally, tantalum crucibles are employed for plutonium processing due to their high durability, excellent temperature stability, and low solubility in plutonium. However, tantalum faces challenges such as plutonium wetting and diffusion, making surface coatings particularly important for crucibles in pyrochemical applications to enhance corrosion resistance against plutonium. Tantalum is also expensive and difficult to machine, prompting the need for advanced manufacturing techniques to address these challenges. Here, in this work, we investigate the interaction of Pu with tantalum and titanium crucibles fabricated using both traditional machining methods and laser powder bed fusion (LPBF) additive manufacturing (AM). LPBF-AM is an advanced technique that allows for the creation of complex geometries from traditionally difficult-to-machine metals by using a high-powered laser to build parts. Previous studies of conventional manufactured tantalum have utilized oxidation and carburization of the surface to mitigate plutonium wetting; however, no studies of surface modified LPBF-AM material have been undertaken. These studies are crucial, given the typical differences in the grain structure between conventional and LPBF-AM materials. All crucibles underwent differential scanning calorimetry to confirm the melting of plutonium. Subsequently, the crucibles were sectioned and mounted in epoxy for microstructural analysis using optical microscopy and scanning electron microscopy. This investigation, comparing the performance of wrought vs AM metal crucibles, provides a basis for future tooling applications in actinide processing techniques and can address the challenges associated with traditional machining, particularly in pyrochemical applications.

Actinides↗

Examination of a Junction-Box Adhesion Test for Use in Photovoltaic Module Qualification: Preprint

Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed toverify the basic robustness of its adhesion system. The details of the proposed test will be described, in addition to the preliminary results obtained using representative materials and components. The described discovery experiments examine moisture-cured silicone, foam tape, and hot-melt adhesives used in conjunction with PET or glass module 'substrates.' To be able to interpret the results,a set of material-level characterizations was performed, including thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. PV j-boxes were adhered to a substrate, loaded with a prescribed weight, and then placed inside an environmental chamber (at 85C, 85% relative humidity). Some systems did not remain attached through the discovery experiments. Observedfailure modes include delamination (at the j-box/adhesive or adhesive/substrate interface) and phase change/creep. The results are discussed in the context of the application requirements, in addition to the plan for the formal experiment supporting the proposed modification to the qualification test.

14 SOLAR ENERGY↗

Alanine/EPR dosimetry applied to the verification of a total body irradiation protocol and treatment planning dose calculation using a humanoid phantom

Purpose: To avoid complications in total body irradiation (TBI), it is important to achieve a homogeneous dose distribution throughout the body and to deliver a correct dose to the lung which is an organ at risk. The purpose of this work was to validate the TBI dose protocol and to check the accuracy of the 3D dose calculations of the treatment planning system. Methods: Dosimetry based on alanine/electron paramagnetic resonance (EPR) was used to measure dose at numerous locations within an anthropomorphic phantom (Alderson) that was irradiated in a clinical TBI beam setup. The alanine EPR dosimetry system was calibrated against water calorimetry in a Co-60 beam and the absorbed dose was determined by the use of ''dose-normalized amplitudes'' A{sub D}. The dose rate of the TBI beam was checked against a Farmer ionization chamber. The phantom measurements were compared to 3D dose calculations from a treatment planning system (Pinnacle) modeled for standard dose calculations. Results: Alanine dosimetry allowed accurate measurements which were in accordance with ionization chamber measurements. The combined relative standard measurement uncertainty in the Alderson phantom was U{sub r}(A{sub D})=0.6%. The humanoid phantom was irradiated to a reference dose of 10 Gy, limiting the lung dose to 7.5 Gy. The ratio of the average measured dose midplane in the craniocaudal direction to the reference dose was 1.001 with a spread of {+-}4.7% (1 sd). Dose to the lung was measured in 26 locations and found, in average, 1.8% lower than expected. Lung dose was homogeneous in the ventral-dorsal direction but a dose gradient of 0.10 Gy cm{sup -1} was observed in the craniocaudal direction midline within the lung lobe. 3D dose calculations (Pinnacle) were found, in average, 2% lower compared to dose measurements on the body axis and 3% lower for the lungs. Conclusions: The alanine/EPR dosimetry system allowed accurate dose measurements which enabled the authors to validate their TBI dose protocol. Dose calculations based on a collapsed cone convolution dose algorithm modeled for regular treatments are accurate within 3% and can further be improved when the algorithm is modeled for TBI.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-E-E-15: Design of a Water Calorimeter for Dual Use in An Integrated MRI-Linac and Gamma-Knife

Purpose: To design a water calorimeter for dual use in an integrated MRI-linac and Gamma-Knife. In calorimetry, dose to water is measured based on the assumption that energy absorbed in a sensitive volume is completely converted to temperature rise {sub (}ΔΤ{sub )} according to the specific heat capacity of the medium c: D=c*ΔT*k, where k is heat transfer correction factor and compensates for heat gain or loss at point of measurement due to conductive effects. Methods: A commercial finite element method software package was used to model four different water calorimeter designs. The long term (48 h) thermal stability of each design was accurately modeled, and the optimization of the final design was based on evaluation of the standard deviation of k for ten consecutive irradiation runs (lower standard deviation translates to greater thermal stability). Several insulator materials of varying thicknesses were investigated, and a sensitivity study of thermal stability to variations in ambient temperature fluctuations was undertaken. Specifically, we evaluated the effect of possible variations in coolant temperature circulating around the calorimeter tank in several scenarios (constant, slowly increasing, or fluctuating). Results: Due to MRI-compatibility requirements, the calorimeter is to be built entirely out of plastic. Among all insulation materials tested, solid state aerogel-based insulation resulted in least heat loss and thermal stability. The final design is cylindrical on top (to be used upright in MRI-linac) and semi-spherical at bottom (for use in GammaKnife). The range of k was found to be 1.002 ± 0.013 (k = 1), comparable with a k of 1.002 ± 0.014 for typical water calorimeters used in high energy beams. A long term stability of 0.36 µK/hr was evaluated. Conclusion: Optimization of a water calorimeter design for dual use in MRI-linac and Gamma-Knife has been completed and the device is currently in production. Supported by NSERC RGPIN 435608.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

WE-AB-BRB-07: Alanine and Monte Carlo Determined Beam Quality Corrections for Nonstandard Fields of the Varian TrueBeam Accelerator

Purpose: To determine beam quality correction factors for flattened and unflattened beams of the Varian TrueBeam™ accelerator using alanine measurements and Monte Carlo calculations. Methods: Measurements were performed using L-α-alanine pellets encased in Virtual Water™ paddles. These were irradiated in liquid water using various field sizes of the 6MV and 10MV beam energies of the TrueBeam™, with both flattening-filter-free (FFF) and flattened beam modes. Measurements were also performed in a 10×10 cm{sup 2} {sup 60}Co field. Pellets were read out by the National Physical Laboratory (NPL, Teddington, UK) using electron paramagnetic resonance (EPR) spectrometry, and results were corrected for energy dependence using graphite calorimetry. Beam quality correction factors (k{sub Q}, k{sub Q}msr,Q, and k{sub Q}clin,Q{sub msr}) were determined for three ionization chambers: an Exradin A12 Farmer-type chamber, an Exradin A1SL scanning chamber, and an Exradin A26 microchamber. All chambers were modeled in the egs-chamber user code of EGSnrc. Sources were created using Varian-supplied IAEA-compliant phase spaces and the BEAMnrc user code, and were validated by comparing measured and simulated dose profiles. Results: Measured and calculated k{sub Q} values agreed within uncertainties, showing the chamber models to be reliable. A comparison of measured and calculated k{sub Q}msr,Q results with TG-51-based values showed that TG-51 adequately accounts for variations in beam quality between flattened and unflattened 10×10 cm{sup 2} fields. Small field corrections, k{sub Q}clin,Q{sub msr}, were determined to be up to 5%, referenced to a 10×10 cm{sup 2} field of the same energy and mode. Conclusion: Beam quality corrections were determined for several beam energies of the TrueBeam™ accelerator using Monte Carlo calculations and were validated using measurements with alanine. Values of k{sub Q} determined using TG-51 were found to be adequate for FFF reference fields. However, small field corrections are necessary for both flattened and unflattened beams to ensure greater treatment planning accuracy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

TH-CD-BRA-05: First Water Calorimetric Dw Measurement and Direct Measurement of Magnetic Field Correction Factors, KQ,B, in a 1.5 T B-Field of An MRI Linac

Purpose: Reference dosimetry in MR-guided radiotherapy is performed in the presence of a B-field. As a consequence the response of ionization chambers changes considerably and depends on parameters not considered in traditional reference dosimetry. Therefore future Codes of Practices need ionization chamber correction factors to correct for both the change in beam quality and the presence of a B-field. The objective was to study the feasibility of water calorimetric absorbed-dose measurements in a 1.5 T B-field of an MRLinac and the direct measurement of kQ,B calibration of ionization chambers. Methods: Calorimetric absorbed dose to water Dw was measured with a new water calorimeter in the bore of an MRLinac (TPR20,10 of 0.702). Two waterproof ionization chambers (PTW 30013, IBA FC-65G) were calibrated inside the calorimeter phantom (ND,w,Q,B). Both measurements were normalized to a monitor ionization chamber. Ionization chamber measurements were corrected for conventional influence parameter. Based on the chambers’ Co-60 calibrations (ND,w,Q0), measured directly against the calorimeter. In this study the correction factors kQ,B was determined as the ratio of the calibration coefficients in the MRLinac and in Co-60. Additionally, kB was determined based on kQ values obtained with the IAEA TRS-398 Code of Practice. Results: The kQ,B factors of the ionization chambers mentioned above were respectively 0.9488(8) and 0.9445(8) with resulting kB factors of 0.961(13) and 0.952(13) with standard uncertainties on the least significant digit(s) between brackets. Conclusion: Calorimetric Dw measurements and calibration of waterproof ionization chambers were successfully carried out in the 1.5 T B-field of an MRLinac with a standard uncertainty of 0.7%. Preliminary kQ,B and kB factors were determined with standard uncertainties of respectively 0.8% and 1.3%. The kQ,B agrees with an alternative method within 0.4%. The feasibility of water calorimetry in the presence of B-fields was demonstrated by the direct determination of Dw and kQ,B. This work was supported by EMRP grant HLT06. The EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union.

60 APPLIED LIFE SCIENCES↗

Crystal Structure of a Virus-Encoded Putative Glycosyltransferase

The chloroviruses (family Phycodnaviridae), unlike most viruses, encode some, if not most, of the enzymes involved in the glycosylation of their structural proteins. Annotation of the gene product B736L from chlorovirus NY-2A suggests that it is a glycosyltransferase. The structure of the recombinantly expressed B736L protein was determined by X-ray crystallography to 2.3-{angstrom} resolution, and the protein was shown to have two nucleotide-binding folds like other glycosyltransferase type B enzymes. This is the second structure of a chlorovirus-encoded glycosyltransferase and the first structure of a chlorovirus type B enzyme to be determined. B736L is a retaining enzyme and belongs to glycosyltransferase family 4. The donor substrate was identified as GDP-mannose by isothermal titration calorimetry and was shown to bind into the cleft between the two domains in the protein. The active form of the enzyme is probably a dimer in which the active centers are separated by about 40 {angstrom}.

36 MATERIALS SCIENCE↗

Synthesis and High-Temperature Heat Capacity of Pb{sub 8}La{sub 2}(GeO{sub 4}){sub 4}(VO{sub 4}){sub 2} and Pb{sub 8}Nd{sub 2}(GeO{sub 4}){sub 4}(VO{sub 4}){sub 2} with the Apatite Structure

The Pb{sub 8}La{sub 2}(GeO{sub 4}){sub 4}(VO{sub 4}){sub 2} and Pb{sub 8}Nd{sub 2}(GeO{sub 4}){sub 4}(VO{sub 4}){sub 2} germanatovanadates with the apatite structure have been prepared by solid-state reactions, by sequentially firing stoichiometric mixtures of PbO, La{sub 2}O{sub 3} (Nd{sub 2}O{sub 3}), GeO{sub 2}, and V{sub 2}O{sub 5} in air at temperatures of 773, 873, 973, and 1073 K. The effect of temperature on the heat capacity of the resultant polycrystalline samples has been studied by differential scanning calorimetry at temperatures from 350 to 950 K using polycrystalline samples. The experimental C{sub p}(T) data have been used to evaluate the thermodynamic functions of the lead lanthanum and lead neodymium germanatovanadates.

36 MATERIALS SCIENCE↗

Synthesis and High-Temperature Heat Capacity of Sm{sub 2}Ge{sub 2}O{sub 7} and Eu{sub 2}Ge{sub 2}O{sub 7}

The Sm{sub 2}Ge{sub 2}O{sub 7} and Eu{sub 2}Ge{sub 2}O{sub 7} germanates have been prepared by solid-state reactions via multistep firing of stoichiometric mixtures of Sm{sub 2}O{sub 3} (Eu{sub 2}O{sub 3}) and GeO{sub 2} in air at temperatures from 1273 to 1473 K. The molar heat capacity of the samarium and europium germanates has been determined by differential scanning calorimetry in the range 350–1000 K and the C{sub p}(T) data have been used to evaluate their thermodynamic properties.

36 MATERIALS SCIENCE↗

Synthesis and High-Temperature Heat Capacity of Dy{sub 2}Ge{sub 2}O{sub 7} and Ho{sub 2}Ge{sub 2}O{sub 7}

The Dy{sub 2}Ge{sub 2}O{sub 7} and Ho{sub 2}Ge{sub 2}O{sub 7} pyrogermanates have been prepared by solid-state reactions in several sequential firing steps in the temperature range 1237–1473 K using stoichiometric mixtures of Dy{sub 2}O{sub 3} (or Ho{sub 2}O{sub 3}) and GeO{sub 2}. The heat capacity of the synthesized germanates has been determined as a function of temperature by differential scanning calorimetry in the range 350–1000 K. The experimentally determined C{sub p}(T) curves of the dysprosium and holmium germanates have no anomalies and are well represented by the Maier–Kelley equation. The experimental C{sub p}(T) data have been used to evaluate the thermodynamic functions of the Dy{sub 2}Ge{sub 2}O{sub 7} and Ho{sub 2}Ge{sub 2}O{sub 7} pyrogermanates: enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(T).

36 MATERIALS SCIENCE↗

Glass Transition Characteristics and Thermodynamic Functions of (1–x)(0.75TeO{sub 2}–0.25WO{sub 3}) + xLa{sub 2}O{sub 3} Glasses

The temperature-dependent heat capacity of three high-purity (1–x)(0.75TeO{sub 2}–0.25WO{sub 3}) + xLa{sub 2}O{sub 3} tellurite glass samples (x = 0.02, 0.04, and 0.06) has been determined by dynamic calorimetry in the range 320–1000 K. The experimental devitrification and heat capacity data have been used to evaluate standard thermodynamic functions: C{sub p}{sup o}(T), enthalpy, entropy, and Gibbs energy in glassy and supercooled liquid states. We have demonstrated model-parameter similarity of properties in a statistical approach and found correlation relationships for parameters as functions of composition, which make it possible to predict the thermodynamic functions of unexplored glasses of this series. We have identified crystallization-resistant compositions of (1–x)(0.75TeO{sub 2}–0.25WO{sub 3}) + xLa{sub 2}O{sub 3} glasses as a basis for the development of optically active elements.

36 MATERIALS SCIENCE↗

Synthesis and High-Temperature Heat Capacity of Neodymium Titanate

Neodymium dititanate, Nd{sub 2}Ti2O{sub 7} (monoclinic structure, sp. gr. P2{sub 1}), has been prepared by solid-state reaction in air at temperatures from 1673 to 1773 K using the Nd{sub 2}O{sub 3} and TiO{sub 2} oxides as starting materials. The high-temperature heat capacity of the resultant polycrystalline Nd{sub 2}Ti{sub 2}O{sub 7} samples has been determined by differential scanning calorimetry. The experimental C{sub p}(T) data have been used to evaluate the thermodynamic functions of neodymium dititanate (enthalpy increment H°(T)–H°(320 K), entropy change S°(T)–S°(320 K), and reduced Gibbs energy Ф°(T)) in the temperature range 320–1053 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Temperature Heat Capacity and Thermodynamic Properties of HoBiGeO{sub 5} and ErBiGeO{sub 5}

Polycrystalline HoBiGeO{sub 5} and ErBiGeO{sub 5} samples have been prepared by solid-state reactions, by firing stoichiometric mixtures of Ho{sub 2}O{sub 3} (Er{sub 2}O{sub 3}), Bi{sub 2}O{sub 3}, and GeO{sub 2}. The effect of temperature on the heat capacity of the synthesized compounds has been investigated by differential scanning calorimetry in the range 350–1000 K. The experimental C{sub p}(T) data have been used to evaluate the thermodynamic functions of bismuth holmium and bismuth erbium germanates: enthalpy increment, entropy change, and reduced Gibbs energy.

36 MATERIALS SCIENCE↗

Investigation of zirconium phosphate Zr{sub 3}(PO{sub 4}){sub 4} during heating

Zirconium phosphate Zr{sub 3}(PO{sub 4}){sub 4} has been synthesized by the sol-gel technique and investigated using X-ray powder diffraction, IR spectroscopy, and differential scanning calorimetry. It has been established that the symmetry of the unit cell, R3-barc, which is characteristic of the NaZr{sub 2}(PO{sub 4}){sub 3} (NZP) family, is lowered to P3-barc. The behavior of the zirconium phosphate during heating has been examined using high-temperature X-ray diffraction at temperatures ranging from 25 to 575 deg. C. It has been revealed that the structure of the zirconium phosphate is hardly subjected to expansion due to heating in the temperature ranges 25-125 deg. C ({alpha}{sub a} < 1 x 10{sup -6} K{sup -1}, {alpha}{sub c} < 1 x 10{sup -6} K{sup -1}, {Delta}{alpha} < 1 x 10{sup -6} K{sup -1}) and 325-575{sup o}C ({alpha}{sub a} = -1.4 x 10{sup -6} K{sup -1}, {alpha}{sub c} < 1 x 10{sup -6} K{sup -1}, {Delta}{alpha} < -2.4 x 10{sup -6} K{sup -1}). In the temperature range 125-325{sup o}C, the synthesized compound undergoes a second-order phase transition (upon heating), which is accompanied by the contraction of the structure along all crystallographic directions. Upon cooling in the range from 75 to 25 deg. C, the phase transition is accompanied by the expansion of the structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-assembling supramolecular systems of different symmetry formed by wedged macromolecular dendrons

The main stages of the self-assembling of supramolecular ensembles have been revealed by studying different functional wedged macromolecules: polymethacrylates with tapered side chains based on gallic acid, their macromonomers, and salts of 2,3,4- and 3,4,5-tris(dodecyloxy)benzenesulphonic acid. The first stage is the formation of individual supramolecular aggregates (long cylinders or spherical micelles) due to the weak noncovalent interactions of mesogenic groups and the subsequent ordering in these aggregates, which is accompanied by a decrease in the free energy of the system. Supramolecular aggregates, in turn, form 2D or 3D lattices. The shape of supramolecular aggregates and its change with temperature are delicate functions of the mesogen chemical structure; this circumstance makes it possible to rationally design complex self-assembling systems with the ability to respond smartly to external stimuli. X-ray diffraction analysis allows one to study the structure of supramolecular systems with different degrees of order, determine the type of mesophases formed by these systems, and reveal the phase behavior of the material. Particular attention has been paid to the method for reconstruction of electron density distribution from the relative reflection intensity. The application of a suite of experimental methods, including wide- and small-angle X-ray diffraction, molecular modeling, differential scanning calorimetry, and polarization optical microscopy, allows one to establish the relationship between the shape of the structural unit (molecule or molecular aggregate), the nature of the interaction, and the phase behavior of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal Synthesis, Crystal Structure, and Photoluminescent Properties of Li[UO{sub 2}(CH{sub 3}COO){sub 3}]{sub 3}[Co(H{sub 2}O){sub 6}]

Single crystal of Li[UO{sub 2}(CH{sub 3}COO){sub 3}]{sub 3}[Co(H{sub 2}O){sub 6}] was prepared and found to crystallize in the monoclinic crystal system in the sp. gr. C2/c, with Z = 2, and unit cell parameters a = 22.1857(15) Å, b = 13.6477(8) Å, c = 15.6921(10) Å, β = 117.842(9)°, V = 4201.3(4) Å{sup 3}. The crystal was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry. The single crystal X-ray diffraction analysis revealed that the crystal has a lamellar structure in which a cobalt hydrate is sandwiched within the Li[UO{sub 2}(CH{sub 3}COO){sub 3}]{sub 3}{sup 2-} chains. Furthermore, the room temperature photoluminescence spectrum of the complex was investigated in the solid state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Expansion of EuF{sub 2+x} Single Crystals and Their Thermal Stability

Thermal expansion of an EuF{sub 2.136} nonstoichiometric crystal with the fluorite structure type (Eu{sub 0.864}{sup 2+}Eu{sub 0.136}{sup 3+}F{sub 2.136}, lattice parameter 5.82171(5) Å) has been experimentally investigated in the temperature range of 9–500 K. The coefficient of thermal expansion is α = 15.8 × 10{sup –6} K{sup –1} at T = 300 K. The observed anomalies in the behavior of the coefficient of thermal expansion at T > 400 K are related to the oxidation processes with partition of Eu{sup 2+} ions. It is established by differential scanning calorimetry that the onset temperature of EuF{sub 2+x} oxidation in air is 430 K and that this process occurs in three stages. X-ray diffraction analysis shows that the oxidation is accompanied by the formation of a phase mixture based on two modifications of the Eu{sub 1–y}{sup 3+}Eu{sub y}{sup 2+}F{sub 3–y} solid solution with the structure types of tysonite (LaF{sub 3}), orthorhombic β-YF{sub 3} phase, and europium oxyfluorides of variable composition EuO{sub 1–x}F{sub 1+2x}, with dominance of the latter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗