Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Simple extrapolation method to predict the electronic structure of conjugated polymers from calculations on oligomers

In this study, we introduce two simple tight-binding models, which we call fragment frontier orbital extrapolations (FFOE), to extrapolate important electronic properties to the polymer limit using electronic structure calculations on only a few small oligomers. In particular, we demonstrate by comparison to explicit density functional theory calculations that for long oligomers the energies of the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), and of the first electronic excited state are accurately described as a function of number of repeat units by a simple effective Hamiltonian parameterized from electronic structure calculations on monomers, dimers and, optionally, tetramers. For the alternating copolymer materials that currently comprise some of the most efficient polymer organic photovoltaic devices one can use these simple but rigorous models to extrapolate computed properties to the polymer limit based on calculations on a small number of low-molecular-weight oligomers.

14 SOLAR ENERGY↗

Correlating DFT Calculations with CO Oxidation Reactivity on Ga-Doped Pt/CeO2 Single-Atom Catalysts

Pt/CeO2 single-atom catalysts have recently attracted increasing interest due to excellent thermal stability, high atom efficiency, and high activity in catalysis. In this study, by means of density functional theory (DFT) calculations, we systematically compare the stability and CO oxidation reactivity of Pt single atoms supported on CeO2(111) (Pt/CeO2) and Ga-doped CeO2(111) (Pt/Ga–CeO2). It was found that the formation of an oxygen vacancy (OV) is very facile near a surface Ga-doping site (Pt/Ga–CeO2–OV). Significantly, the stability of Pt single atoms anchored on the Ga site was enhanced compared with those on the bare ceria surface. In addition, our DFT results suggest a CO oxidation mechanism on Pt/Ga–CeO2–OV that differs from that on Pt/CeO2. In particular, the OV site plays an important role in activating the oxygen molecule, which then reacts with CO preadsorbed on Pt. The calculated energy barrier on Pt/Ga–CeO2–OV is about 0.43 eV lower than that on the undoped catalyst, suggesting an enhanced reactivity for CO oxidation. Experiments on CO oxidation and in situ diffuse reflectance infrared Fourier transform spectroscopy are performed to corroborate the results obtained from the DFT calculations, and a good agreement is achieved. The combination between calculations and experiments sheds light on the influence of support doping on atomically dispersed Pt/CeO2 catalysts.

Feng, Yingxin↗

Generalized Optimized Effective Potential for Orbital Functionals and Self-Consistent Calculation of Random Phase Approximations

A new self-consistent procedure for calculating the total energy with an orbital-dependent density functional approximation (DFA), the generalized optimized effective potential (GOEP), is developed in the present work. The GOEP is a nonlocal Hermitian potential that delivers the sets of occupied and virtual orbitals and minimizes the total energy. The GOEP optimization leads to the same minimum as does the orbital optimization. The GOEP method is promising as an effective optimization approach for orbital-dependent functionals, as demonstrated for the self-consistent calculations of the random phase approximation (RPA) to the correlation functionals in the particle–hole (ph) and particle–particle (pp) channels. The results show that the accuracy in describing the weakly interacting van der Waals systems is significantly improved in the self-consistent calculations. In particular, the important single excitations contribution in non-self-consistent RPA calculations can be captured self-consistently through the GOEP optimization, leading to orbital renormalization, without using the single excitations in the energy functional.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization and Structure Calculations for Noncovalent Interactions in Extended Molecular Systems Based on Wave Function and Density Functional Theories

More than 20 years ago, we published in Chemical Reviews a paper entitled “Intermolecular Interactions between Medium-Sized Systems. Nonempirical and Empirical Calculations of Interaction Energy: Successes and Failures”. The situation in calculations of noncovalent interactions at that time can be best characterized by the question we posed at the very beginning of the review: “Can quantum chemistry describe vdW (van der Waals; today we call it noncovalent) interactions as successfully as covalent interactions?” Our answer then was “unambiguously yes”. We had good reason for an optimistic “yes” since we presented the first coupledcluster calculations including triple excitations for a (at that time) large complexsthe water dimer. We stressed the importance of the triple excitations for noncovalent interactions, and in the section called Prospects, we wrote that “significant progress is highly desirable with beyond-SCF methods, where new, more accurate and efficient procedures are developed”. In this respect we were right, and in the past 20 years, we have witnessed an enormous growth of interest in the fast and accurate calculation of intermolecular interactions. What is the reason for such an interest, or more generally, why are noncovalent interactions so relevant in modern research? Is it the mere existence of noncovalent complexes in the gas and liquid phases? Certainly not. The answer should be sought in the role that noncovalent interactions are playing in both bio- and nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Influence of Functionals on Density Functional Theory Calculations of the Properties of Reducible Transition Metal Oxide Catalysts

Reducible transition metal oxides (RTMOs) comprise an important class of catalytic materials that are used for the selective oxidation and electro- and photochemical splitting of water, and as supports for metal nanoparticles. It is highly desirable to model the properties of these materials accurately using density functional theory (DFT) in order to understand how oxide structure and performance are related and to guide the search for materials exhibiting superior performance. Unfortunately, accurate description of the structural and electronic properties of RTMOs using DFT has proven particularly challenging. The M06-L density functional, which has been shown to be broadly accurate for calculations of gas phase clusters, has recently become available to researchers carrying out calculations in the solid state, but its performance in determining the properties RTMOs has been little investigated. The aim of this work was to assess the performance of the M06-L functional for describing the structural and electronic properties of a family of RTMOs: MoO 2 , MoO 3 , and Bi 2 Mo 3 O 12 . Lattice constants, band gaps, and densities of states calculated using the M06-L functional are compared to those obtained from DFT+U. We have also used the M06-L functional to determine the reaction barrier for propene activation over Bi 2 Mo 3 O 12 , the rate-limiting step in the oxidation of propene to acrolein. We find that while DFT calculations carried out with the M06-L functional are roughly five times more expensive computationally than those performed with DFT+U, the results obtained using the M06-L functional provide sensible results for all properties investigated, while avoiding the necessary trade-off between accurate electronic structure and accurate thermochemistry that occurs in DFT+U.

Getsoian, Andrew “Bean”↗

Visible Light Sensitized CO 2 Activation by the Tetraaza [Co II N 4 H(MeCN)] 2+ Complex Investigated by FT-IR Spectroscopy and DFT Calculations

In situ FT-IR measurements and electronic structure calculations are reported for the reduction of CO 2 catalyzed by the macrocyclic complex [Co II N 4 H] 2+ (N 4 H = 2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]-heptadeca-1(17),2,11,13,15-pentaene). Beginning from the [Co II N 4 H] 2+ resting state of the complex in wet acetonitrile solution, two different visible light sensitizers with substantially different reducing power are employed to access reduced states. Accessing reduced states of the complex with a [Ru(bpy) 3 ] 2+ sensitizer yields an infrared band at 1670 cm -1 attributed to carboxylate, which is also observed for an authentic sample of the one-electron reduced complex [CoN 4 H(MeCN)] + in CO 2 saturated acetonitrile solution. The results are interpreted based on calculations using the pure BP86 functional that correctly reproduces experimental geometries. Continuum solvation effects are also included. The calculations show that Co is reduced to CoIin the first reduction, which is consistent with experimental d-d spectra of square Co(I) macrocycle complexes. The energy of the CO 2 adduct of the one-electron reduced catalyst complex is essentially the same as for [CoN 4 H(MeCN)] + , which implies that only a fraction of the latter forms an adduct with CO 2 . By contrast, the calculations indicate a crucial role for redox noninnocence of the macrocyclic ligand in the doubly reduced state, [Co I (N 4 H) -• ], and show that [Co I (N 4 H) -• ] binds partially reduced CO 2 fairly strongly. Experimentally accessing [Co I (N 4 H)-•] with an Ir(bpy) 3 sensitizer with greater reducing power closes the catalytic cycle as FT-IR spectroscopy shows CO production. Use of isotopically substituted C 18 O 2 also shows clear evidence for 18 O-substituted byproducts from CO 2 reduction to CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wannier–Koopmans method calculations for transition metal oxide band gaps

The widely used density functional theory (DFT) has a major drawback of underestimating the band gaps of materials. Wannier–Koopmans method (WKM) was recently developed for band gap calculations with accuracy on a par with more complicated methods. WKM has been tested for main group covalent semiconductors, alkali halides, 2D materials, and organic crystals. Here we apply the WKM to another interesting type of material system: the transition metal (TM) oxides. TM oxides can be classified as either with d 0 or d 10 closed shell occupancy or partially occupied open shell configuration, and the latter is known to be strongly correlated Mott insulators. We found that, while WKM provides adequate band gaps for the d0 and d10 TM oxides, it fails to provide correct band gaps for the group with partially occupied d states. This issue is also found in other mean-field approaches like the GW calculations. We believe that the problem comes from a strong interaction between the occupied and unoccupied d-state Wannier functions in a partially occupied d-state system. We also found that, for pseudopotential calculations including deep core levels, it is necessary to remove the electron densities of these deep core levels in the Hartree and exchange–correlation energy functional when calculating the WKM correction parameters for the d-state Wannier functions.

36 MATERIALS SCIENCE↗

Charge-patching method for the calculation of electronic structure of polypeptides

Theoretical study of the electronic structures of protein is a fundamental challenge in computational biochemistry due to the large size of the systems. The electronic structure of a protein is important for some of the important protein functionalities, such as photosynthesis. Here, we explored the charge-patching method to calculate the electronic structure of polypeptides. This method generates the charge densities of the systems by patching the charge motifs calculated from small prototype systems. The method was tested on a range of polypeptides, including the glycine polypeptide in 2 7 -ribbon, α-helix, 3 10 -helix, and β-strand structures. After the charge density profiles of these systems were obtained, the electronic structures of these glycine polypeptides were further calculated based on density functional theory (DFT) using a folded-spectrum method. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were analyzed and compared with conventional direct DFT calculations. The charge-patching method results were found to be in good agreement with the directed DFT results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures and localized vibrational states of defects in graphite by tight-binding calculations

The structural and vibrational properties of pristine graphite and point defects in graphite are studied by tight-binding (TB) calculations using a three-center TB potential model. We showed that the three-center TB potential without ‘‘ad hoc’’ van der Waals interaction corrections can accurately describe the inter-layer distance of graphite and the lowest-energy structures and stabilities of typical point defects in graphite. The results from our TB calculations are in good agreement with those from density-functional theory calculations with van der Waals interaction corrections. We also investigated the vibrational properties to gain better understanding on the localization of vibrational states induced by the point defects. Our calculation results show that although localized or quasi-localized vibrational modes can be found in all defected graphite, the localization induced by Frenkel pair, dual-vacancy, and dual-interstitial defects is much stronger. Atomic displacements associated with the localized vibrational modes induced by these three point defects are also analyzed

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An improved guess for the variational calculation of charge-transfer excitations in large systems

Ab initio quantum-chemical methods that perform well for computing the electronic ground state are not straightforwardly transferable to electronically excited states, particularly in large molecular systems. Wave function theory offers high accuracy, but is often prohibitively expensive. Methods based on time-dependent density functional theory (TD-DFT) are crucially sensitive to the chosen exchange-correlation functional (XCF) parameterization, and system-specific tuning protocols were therefore proposed to address the method's robustness. Methods based on the variational relaxation of the excited-state electron density showcased promising results for the calculation of charge-transfer excitations, but the complex shape of the electronic hypersurface makes convergence to a specific excited state much more difficult than for the ground state when standard variational techniques are applied. We address the latter aspect by providing suitable initial guesses, which we obtain by two separate constrained algorithms. Combined with the squared-gradient minimization algorithm for all-electrons relaxation in a freeze-and-release scheme (FRZ-SGM), we demonstrate that orbital-optimized density functional theory (OO-DFT) calculations can reliably converge to the charge-transfer states of interest even for large molecular systems. We test the FRZ-SGM method on a phenothiazine-anthraquinone CT excitation in a supramolecular Pd(II) coordination cage complex as a function of the cage conformation. This compound has been studied experimentally prior to our work. We compare this freeze-and-release scheme to two XCF reparameterizations, which were recently proposed as low-cost TD-DFT-based alternatives to variational methods. Two dye-semiconductor complexes, which were previously investigated in the context of photovoltaic applications, serve as a second example to investigate the convergence and stability of the FRZ-SGM approach. Our results demonstrate that FRZ-SGM provides reliable convergence for charge-transfer excited states and avoids variational collapse to lower-lying electronic states, whereas time-dependent DFT calculations with an adequate tuning procedure for the range-separation parameter provide a computationally efficient initial estimate of the corresponding energies, with a computational cost comparable to that of configuration-interaction singles (CIS) calculations.

Bogo, Nicola↗

Microscopic calculations with noniterative finite amplitude methods and the application to neutron radiative captures and inelastic scatterings

We derive the fully self-consistent quasiparticle random-phase approximation (QRPA) equations with noniterative finite amplitude methods and calculate the transition strengths of giant resonances. Then, we apply the QRPA results to both neutron radiative capture calculations based on the statistical Hauser-Feshbach theory and inelastic scattering calculations based on distorted-wave Born approximation (DWBA). We compare the calculated results with available experimental data and demonstrate how our approach can reproduce giant resonances and various nuclear reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

van der Waals forces: Accurate calculation and assessment of approximate methods in delectric nanocolloids up to 16nm

A microscopic method is used to calculate the van der Waals forces between large nanocolloids. We assess the reliability of some predictions derived from the most commonly used macroscopic method in practice, the Dzyaloshinskii-Lifshitz-Pitaevskii (DLP) theory combined with the Derjaguin approximation, by calculating them using the “coupled dipole method” (CDM). The CDM, which has demonstrated its ability to calculate VDW interactions for small-nanoclusters, accounts for all many-body forces, and it does not assume a continuous, homogeneous dielectric function in each material. It is shown that, out of three explored, one of the routinely assumed properties (‘small-separation dominance’) of van der Waals forces predicted from the macroscopic method is generally applicable for large spherical dielectric nanoclusters of diameter 16 nm allowing much more efficient CDM calculations. The failure of two other routinely assumed properties, ‘infinite- depth approximation’ and ‘sphere-cube analogy’, demonstrates that the effect of finite-size and shape is important in nanocolloid systems even at the large size of 16nm.

36 MATERIALS SCIENCE↗

Calculations of rovibrational energies and dipole transition intensities for polyatomic molecules using MULTIMODE

We report rigorous calculations of rovibrational energies and dipole transition intensities for three molecules using a new version of the code MULTIMODE. The key features of this code which permit, for the first time, such calculations for moderately sized but otherwise general polyatomic molecules are briefly described. Calculations for the triatomic molecule BF 2 are done to validate the code. New calculations for H2CO and H 2 CS are reported; these make use of semiempirical potentials but ab initio dipole moment surfaces. The new dipole surface for H 2 CO is a full-dimensional fit to the dipole moment obtained with the coupled-cluster with single and double excitations and a perturbative treatment of triple excitations method with the augmented correlation consistent triple zeta basis set. Detailed comparisons are made with experimental results from a fit to relative data for H 2 CS and absolute intensities from the HITRAN database for H 2 CO.

74 ATOMIC AND MOLECULAR PHYSICS↗

Calculation of electromagnetic force in electromagnetic forming process of metal sheet

Electromagnetic forming (EMF) is a forming process that relies on the inductive electromagnetic force to deform metallic workpiece at high speed. Calculation of the electromagnetic force is essential to understand the EMF process. However, accurate calculation requires complex numerical solution, in which the coupling between the electromagnetic process and the deformation of workpiece needs be considered. In this paper, an appropriate formula has been developed to calculate the electromagnetic force in metal work-piece in the sheet EMF process. The effects of the geometric size of coil, the material properties, and the parameters of discharge circuit on electromagnetic force are taken into consideration. Through the formula, the electromagnetic force at different time and in different positions of the workpiece can be predicted. The calculated electromagnetic force and magnetic field are in good agreement with the numerical and experimental results. The accurate prediction of the electromagnetic force provides an insight into the physical process of the EMF and a powerful tool to design optimum EMF systems.

30 DIRECT ENERGY CONVERSION↗

Kinetics of the Reaction of the Heaviest Hydrogen Atom with H2, the 4Heμ + H2 -> 4HeμΗ + H Reaction: Experiments, Accurate Quantal Calculations, and Variational Transition State Theory, including Kinetic Isotope Effects for a Factor of 36.1 in Isotopic Mass

The neutral muonic helium atom {sup 4}He{mu}, in which one of the electrons of He is replaced by a negative muon, may be effectively regarded as the heaviest isotope of the hydrogen atom, with a mass of 4.115 amu. We report details of the first muon spin rotation ({mu}SR) measurements of the chemical reaction rate constant of {sup 4}He{mu} with molecular hydrogen, {sup 4}He{mu} + H{sub 2} {yields} {sup 4}He{mu}H + H, at temperatures of 295.5, 405, and 500 K, as well as a {mu}SR measurement of the hyperfine coupling constant of muonic He at high pressures. The experimental rate constants, k{sub He{mu}}, are compared with the predictions of accurate quantum mechanical (QM) dynamics calculations carried out on a well converged Born-Huang (BH) potential energy surface, based on complete configuration interaction calculations and including a Born-Oppenheimer diagonal correction. At the two highest measured temperatures the agreement between the quantum theory and experiment is good to excellent, well within experimental uncertainties that include an estimate of possible systematic error, but at 295.5 K the quantum calculations for k{sub He{mu}} are below the experimental value by 2.1 times the experimental uncertainty estimates. Possible reasons for this discrepancy are discussed. Variational transition state theory calculations with multidimensional tunneling have also been carried out for k{sub He{mu}} on the BH surface, and they agree with the accurate QM rate constants to within 30% over a wider temperature range of 200-1000 K. Comparisons between theory and experiment are also presented for the rate constants for both the D + H{sub 2} and Mu + H{sub 2} reactions in a novel study of kinetic isotope effects for the H + H{sub 2} reactions over a factor of 36.1 in isotopic mass of the atomic reactant.

08 HYDROGEN↗

Dose Calculation For Accidental Release Of Radioactive Cloud Passing Over Jeddah

For the evaluation of doses after the reactor accident, in particular for the inhalation dose, a thorough knowledge of the concentration of the various radionuclide in air during the passage of the plume is required. In this paper we present an application of the Gaussian Plume Model (GPM) to calculate the atmospheric dispersion and airborne radionuclide concentration resulting from radioactive cloud over the city of Jeddah (KSA). The radioactive cloud is assumed to be emitted from a reactor of 10 MW power in postulated accidental release. Committed effective doses (CEDs) to the public at different distance from the source to the receptor are calculated. The calculations were based on meteorological condition and data of the Jeddah site. These data are: pasquill atmospheric stability is the class B and the wind speed is 2.4m/s at 10m height in the N direction. The residence time of some radionuclides considered in this study were calculated. The results indicate that, the values of doses first increase with distance, reach a maximum value and then gradually decrease. The total dose received by human is estimated by using the estimated values of residence time of each radioactive pollutant at different distances.

61 RADIATION PROTECTION AND DOSIMETRY↗

First-Principles Calculation of Thermodynamic Stability of Acids and Bases under pH Environment: A Microscopic pH Theory

Despite being one of the most important thermodynamic variables, pH has yet to be incorporated into first-principles thermodynamics to calculate stability of acidic and basic solutes in aqueous solutions. By treating the solutes as defects in homogeneous liquids, we formulate a first-principles approach to calculate their formation energies under proton chemical potential, or pH, based on explicit molecular dynamics. The method draws analogy to first-principle calculations of defect formation energies under electron chemical potential, or Fermi energy, in semiconductors. From this, we propose a simple pictorial representation of the general theory of acid-base chemistry. By performing first-principles molecular dynamics of liquid water models with solutes, we apply the formulation to calculate formation energies of various neutral and charged solutes such as H{sup +}, OH{sup -}, NH{sub 3}, NH{sub 4}{sup +}, HCOOH, and HCOO{sup -} in water. The deduced auto-dissociation constant of water and the difference in the pKa values of NH{sub 3} and HCOOH show good agreement with known experimental values. Our first-principles approach can be further extended and applied to other bio- and electro-chemical molecules such as amino acids and redox reaction couples that could exist in aqueous environments to understand their thermodynamic stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin-independent calculation of quadrupole intensities in X-ray spectroscopy

For electronic excitations in the ultraviolet and visible range of the electromagnetic spectrum, the intensities are usually calculated within the dipole approximation, which assumes that the oscillating electric field is constant over the length scale of the transition. For the short wavelengths used in hard X-ray spectroscopy, the dipole approximation may not be adequate. In particular, for metal K-edge X-ray absorption spectroscopy (XAS), it becomes necessary to include higher-order contributions. In quantum-chemical approaches to X-ray spectroscopy, these so-called quadrupole intensities have so far been calculated by including contributions depending on the square of the electric-quadrupole and magnetic-dipole transition moments. However, the resulting quadrupole intensities depend on the choice of the origin of the coordinate system. Here, we show that for obtaining an origin-independent theory, one has to include all contributions that are of the same order in the wave vector consistently. This leads to two additional contributions depending on products of the electric-dipole and electric-octupole and of the electric-dipole and magnetic-quadrupole transition moments, respectively. We have implemented such an origin-independent calculation of quadrupole intensities in XAS within time-dependent density-functional theory, and demonstrate its usefulness for the calculation of metal and ligand K-edge XAS spectra of transition metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗