Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bandwidth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

End-to-End Modeling of the TDM Readout System for CMB-S4

The CMB-S4 experiment is developing next-generation ground-based microwave telescopes to observe the cosmic microwave background with unprecedented sensitivity. This will require an order of magnitude increase in the 100-mK detector count, which, in turn, increases the demands on the readout system. The CMB-S4 readout will use time-division multiplexing (TDM), taking advantage of faster switches and amplifiers in order to achieve an increased multiplexing factor. To facilitate the design of the new readout system, we have developed a model that predicts the bandwidth and noise performance of this circuitry and its interconnections. This is then used to set requirements on individual components in order to meet the performance necessary for the full system. Here, we present an overview of this model and compare the model results to the performance of both legacy and prototype readout hardware.

47 OTHER INSTRUMENTATION↗

Microwave Absorption Properties of Cobalt-Zirconium Doped Strontium Hexaferrites in Ku-Frequency Band

In this article, microwave electromagnetic properties of doped strontium hexaferrites have been investigated in Ku microwave frequency band (12.4–18 GHz), along with their performance as microwave absorbing materials. Vector network analyzer has been used for characterization of cobalt-zirconium substituted strontium hexaferrites Sr(CoZr){sub x}Fe{sub (12−2x)}O{sub 19} (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0), synthesized using sol-gel method. Real parts of permittivity and permeability have shown very small variations up to 16 GHz. There has been a dip in spectrum of real part of permittivity and a peak in spectrum of real part of permeability at the same frequency in 16–18 GHz range for every composition. Regarding the electromagnetic wave absorption, all the six prepared compositions have potential (≥90% absorption) for usage in suppressing electromagnetic pollution. The composition with x = 1.0 has achieved the highest −10 dB absorption bandwidth from 15 to 18 GHz frequency. The realization of absorbing materials with maximum absorption is related to the phenomenon of impedance matching and high electromagnetic losses. The correlation of absorption peaks with attenuation constant, wave impedance and complex thickness has also been studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable Microwave Absorption Properties in Ni–Zn-Substituted BaCoTiFe{sub 10}O{sub 19}

Ni–Zn-substituted BaCoTiFe{sub 10}O{sub 19} were successfully prepared by a sol-gel combustion method. The grain size of samples is about 150–800 nm ,and the grains first increase and then decrease with increasing x. Through XRD analysis, all diffraction peaks correspond to the BaTiCoFe{sub 10}O{sub 19} and no other phase signal is detected. With x = 0.3, the saturation magnetization (M{sub s}) is biggest (66.7 emu/g) and its coercivity (H{sub c}) is 172.3 Oe. The curves μ{sup ″} − μ{sup ′} have distorted semicircles, and each semicircle has an extremum. Each extremum of μ{sup ″} − μ{sup ′} curve corresponds to a peak of μ{sup ″} curve and has response to reflection loss (RL), which is further illuminated. When x = 0.3, the widest bandwidth of RL ≤−10 dB is 6.13 GHz (9.68–15.81 GHz) at d = 2.6 mm. The RL curve closely relates to distorted semicircle of μ{sup ″} − μ{sup ′} curve, and the relation is also deeply illuminated, which is beneficial to study absorption materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crossover-Induced Spin Fluctuation and Electron Pairing in Strongly Correlated Electrons

We investigate the two-dimensional (2D) Hubbard model and d-p model as a model for cuprate high-temperature superconductors, by employing an optimized variational Monte Carlo method. We improved the many-body wave function starting from the simple Gutzwiller function. On the basis of optimized variational wave functions, we show that there is a superconducting phase in the ground state of the 2D Hubbard model. The on-site repulsive Coulomb interaction U can bring about high-temperature superconductivity because its characteristic energy is of the order of eV. The attractive interaction between electrons is induced by the crossover from weakly to strongly correlated regions. High-temperature superconductivity is possible in the strongly correlated region, where U is greater than the bandwidth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seebeck Coefficient Measurement and Its Narrow Band Model Interpretation in FeTe{sub 0.5}Se{sub 0.5} Superconductor

We have measured Seebeck coefficient (S) of FeTe{sub 0.5}Se{sub 0.5} superconducting sample from 10 to 300 K. The variation of Seebeck coefficient with temperature of this system was found to be very anomalous, and the overall experimental observation of the S(T) was studied in the outline of a narrow-band model. In high-temperature region, the Seebeck coefficient is almost independent of temperature. Further, from the study of high-temperature magnitude of S, sample undergoes a change in sign in the Seebeck coefficient, wherein, appearance of a negative peak around 22 K and subsequently, its Seebeck coefficient goes to zero in the superconducting transition temperature regime around 11 to 13 K. It is revealed that the bandwidth and a small asymmetry involved in narrow bands give a realistic explanation to the anomalous temperature dependence of Seebeck coefficient of FeTe{sub 0.5}Se{sub 0.5} system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of La Doping on the Crystal Structure, Magnetic, and Microwave Absorption Properties of Nd{sub 2}Fe{sub 14}B Compound

The crystal structure, magnetic, and microwave absorption properties of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B system have been investigated. The La{sub 2}Fe{sub 14}B compound was successfully synthesized and refined, giving a tetragonal structure, space group P4{sub 2}/mnm with the Nd{sub 2}Fe{sub 14}B-type structure. The crystal structure parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds were determined by full-profile Rietveld refinements. The results revealed that all intermediate alloys form a continuous solid solution. The normalized lattice parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds increase linearly with an increase of La concentration. Based on the results of DSC measurements and X-ray powder diffraction examinations, the phase diagram of the Nd{sub 2}Fe{sub 14}B-La{sub 2}Fe{sub 14}B system has been constructed. The remanence (M{sub r}) and coercivity (H{sub c}) of (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B (x = 0.00, 0.10, 0.20, 0.30, and 0.40) gradually decrease. The highest reflection loss is − 29.8, − 27.4, − 24.1, − 18.6, and − 14.2 dB at 9.8, 8.9, 7.5, 6.9, and 6.5 GHz, respectively. The absorption peak shifts toward from higher frequency region to lower frequency region and the absorption bandwidth widens with the increase of the La substitution.

36 MATERIALS SCIENCE↗

Investigation of Magnetic and Microwave Absorption Properties of Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}CoTiO{sub 19} Hexaferrites in 18.0–26.5 GHz Band

A series of Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}CoTiO{sub 19} hexaferrite samples with x = 0.00–0.25 (step size 0.05) were prepared by using conventional solid-state reaction technique. The magnetic properties of the hexaferrites have been investigated at room temperature by employing a vibrating sample magnetometer. There is an overall decrease in saturation magnetization from 70.64 to 57.83 emu/g with an increase in doping concentration from x = 0.00–0.25. The microwave measurements were done utilizing vector network analyzer in the k-band (18.0–26.5 GHz) frequency range. The electromagnetic measurements revealed that the gross tangent loss is maximum for x = 0.10 sample. The microwave absorption measurements show that sample x = 0.10 with 1.4 mm thickness exhibits a reflection loss of − 26.59 dB (99.78% signal absorption) and 7.65 GHz bandwidth. Thus, it is considered for thin single-layer broadband microwave absorber applications in 18.0–26.5 GHz frequency range.

36 MATERIALS SCIENCE↗

Effect of CuO{sub 2} Lattice Strain on the Electronic Structure and Properties of High-T{sub c} Cuprate Family

Doping and strain dependences of the electronic structure of the CuO{sub 6}-octahedra layer within LDA+GTB method in the frameworks of six-band p-d model are calculated. Band structure and Fermi surface of the quasiparticle excitations in the effective Hubbard model are characterized by inhomogeneous distribution of the k-dependent spectral weight. Doping results in reconstruction of the band structure, redistribution of the spectral weight over dispersion surface, and reconstruction of Fermi surface from small hole pockets in the underdoped region to large hole contour in the overdoped region through two quantum phase transitions (QPT). Strain increasing leads to displacement of the valence and conductivity bands, bandwidths decreasing, and shift of the concentrations corresponding to QPTs. Strain dependences of the antiferromagnetic exchange coupling and DOS at the Fermi level determining superconducting temperature T{sub c} are obtained. Effective exchange coupling in the equation for T{sub c} demonstrates monotonic strain dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic, Microwave Absorbing Performance of Al{sub 8}Mn{sub 5} Alloy with La Dopant

The Al{sub 8}Mn{sub 5 − x}La{sub x} (x = 0, 0.2, 0.6, 1.0) powders were triumphantly manufactured by vacuum melting and planetary mill equipment. The influences of La content on phase constitution, morphology, saturation magnetization, and electromagnetic parameters were investigated by related equipment. The consequences demonstrate that Al{sub 8}Mn{sub 4}La phase, average size of particulate increases and the saturation magnetization (Ms) decreases as La content increased. The minimum reflectivity of Al{sub 8}Mn{sub 4.4}La{sub 0.6} powder reaches about −43.5 dB in the range of 10.8 to 11.7 GHz, and the effective bandwidth (RL < − 10 dB) can obtain about 1.70 GHz with the best matching thickness of 1.8 mm. These manifest Al{sub 8}Mn{sub 5-x}La{sub x} (x = 0, 0.2, 0.6, 1.0) powders possess the capacity to be excellent microwave absorbing materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Microwave Absorption Properties of Doped M-Type Barium Hexagonal Ferrites in Ka-band Frequencies

The present study reports the microwave absorption characteristics of La{sup 3+}-Na{sup +} substituted barium hexaferrites with chemical composition: Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}CoTiO{sub 19} and Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}Co{sub 0.5}TiMn{sub 0.5}O{sub 19} (0.00 ≤ x ≤ 0.25) respectively in Ka-band frequencies. The electromagnetic characteristics such as complex permittivity, complex permeability, and microwave absorption properties were studied using Vector Network Analyzer in 26.5–40.0 GHz frequency band. Dielectric properties showed almost constant variation with increase in frequency. Magnetic permeability spectra observed wavy variation with frequency. Comparing the electromagnetic properties of two series, it is observed that Co–Ti–Mn series observes higher values of electromagnetic properties in comparison to Co–Ti series. For composition x = 0.15 of Ba{sub (1−2x)}La{sub x}Na{sub x}Fe{sub 10}Co{sub 0.5}TiMn{sub 0.5}O{sub 19} series, −55.33 dB reflection loss at 30 GHz frequency with −10 dB absorption bandwidth around 3.51 GHz has been observed. Thus, these materials can be employed as effective absorbers for Ka-band microwave absorbers.

36 MATERIALS SCIENCE↗

Detecting anomalous packets in network transfers: investigations using PCA, autoencoder and isolation forest in TCP

Large-scale scientific workflows rely heavily on high-performance file transfers. These transfers require strict quality parameters such as guaranteed bandwidth, no packet loss or data duplication. To have successful file transfers, methods such as predetermined thresholds and statistical analysis need to be done to determine abnormal patterns. Network administrators routinely monitor and analyze network data for diagnosing and alleviating these, making decisions based on their experience. However, as networks grow and become complex, monitoring large data files and quickly processing them, makes it improbable to identify errors and rectify these. Abnormal file transfers have been classified by simply setting alert thresholds, via tools such as PerfSonar and TCP statistics (Tstat). This paper investigates the feasibility of unsupervised feature extraction methods for identifying network anomaly patterns with three unsupervised classification methods—principal component analysis, autoencoder and isolation forest. Here, we collect file transfer statistics from two experiment sets—synthetic iPerf generated traffic and 1000 Genome workflow runs, with synthetically introduced anomalies. Our results show that while PCA and a simple autoencoder finds it difficult to detect clusters, the tree-variant isolation forest is able to identify anomalous packets by breaking down TCP traces into tree classes early.

97 MATHEMATICS AND COMPUTING↗

Unsupervised classification-based hyperspectral data processing: lossy compression

The existing lossy compression algorithms play an important role in reducing the cost of storage equipment and bandwidth for hyperspectral (HS) application. However, none of the lossy compression algorithms considers the real-time classification of HS data. In this paper, we present a new lossy compression method for HS data that aims to optimally compress in both spatial and spectral domains and simultaneously maximize classification performance. For this target, Harsanyi–Farrand–Chang (HFC) and k-means++ algorithms are applied to achieve a spectral library and an index matrix for HS image. Spectral angle mapping and Euclidean distance are used to update the spectral library and the index matrix. The experiment results indicate that the proposed method has a good classification performance. The results also reveal that the proposed method works well in real-time classification and compression of HS data with a large volume and achieves a high compression ratio. It is noteworthy to mention that the superiority of our method in compression becomes more apparent as the volume of HS data grows. Consequently, the proposed method has a strong advantage in HS applications that require both compression and classification.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flattened and broadband mid-infrared super-continuum generation in As{sub 2}Se{sub 3} based holey fiber

By using an As{sub 2}Se{sub 3} based holey fiber (HF) with a normal flat dispersion profiles, a flattened and broadband mid-infrared super-continuum generation is analysed. The transmission of an ultra-short pulse in the HF is numerically simulated by solving the generalized nonlinear Schrödinger equation under various parameters. The simulation results show that, by launching a pulse with a width of 50 fs and a peak power of 4.25 kW at 4375 nm into the 6 mm-long HF, a flat and broadband super-continuum at 3 dB level is successfully generated. The super-continuum covers the wavelengths from 3866 to 5958 nm which is the largest flat bandwidth reported in such a short fiber.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photonic generation of millimeter-wave ultra-wideband monocycle signal using up-conversion based on stimulated Brillouin scattering effect

We propose a novel scheme for photonic generation of millimeter-wave (MMW) ultra-wideband monocycle signal free of strong local oscillation (LO) and low-frequency component. A theory and a mathematical model are built to investigate the proposed scheme. Firstly, a differentiator is implemented using a dual-drive Mach–Zehnder modulator to attain monocycle pulses by differentiating a series of Gauss pulses. Subsequently, a dual-parallel Mach–Zehnder modulator and stimulated Brillouin scattering effect are employed to realize single-sideband modulation for up-converting the monocycle pulses to the MMW band. In the calculation, the generated signal is centered at 26 GHz with 10-dB bandwidth of 7 GHz and its power efficiency is about 50.08%. In addition, on–off keying modulation, amplitude modulation (PAM) and pulse position modulation monocycle pulses are generated. The spectrum of the generated signal meets with the FCC mask efficiently, so this technique has a potential application in MMW radar communication systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dispersion flattened extremely high-birefringent kagome lattice elliptic core photonic crystal fiber in THz regime

A highly birefringent elliptic porous-core photonic crystal fiber with kagome lattice cladding has been presented for terahertz (THz) wave transmission. The slotted airholes inside the elliptic core effectively disrupt the symmetry of the porous-core which offers extremely high modal birefringence whereas the kagome cladding structure results in significantly low effective material loss (EML). The birefringence of the proposed structure is 9.73×10{sup −2} and the EML is 0.056 cm{sup −1} for y-polarized mode at an operating frequency of 1 THz. The suggested structure also provides very flat dispersion over a bandwidth of 300 GHz. It is highly expected that this elliptic core waveguide would be remarkably useful in numerous polarization maintaining THz applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-PAPR interleaved single-carrier FDM scheme for optical wireless communications

As a potential complementary access technology for the 5G wireless systems, optical wireless communication (OWC) gains extensive attention for decades owing to its numerous advantages of broad license-free spectrum, immunity to electromagnetic interference and high-level privacy. However, two rigorous obstacles to achieve high data-rate OWC transmission are the severe nonlinear clipping of transmitter and high-frequency attenuation of OWC system. In this paper, we propose the first interleaved single-carrier frequency-division multiplexing (I-SC-FDM) scheme for OWC systems. Compared with orthogonal frequency-division multiplexing (OFDM), I-SC-FDM has a lower peak-to-average power ratio, which makes it more immune to the nonlinearity clipping in OWC systems. Meanwhile, for the bandwidth-limited OWC systems, I-SC-FDM has better performance on resistance to the serious high-frequency distortion. The simulation results indicate that, under the transmitter nonlinearity and optical-wireless diffuse fading channel, the maximum Q{sup 2} of I-SC-FDM is about 3.44 dB and 3.14 dB higher than that of OFDM when 4-ary quadrature amplitude modulation (4-QAM) and 16-QAM are modulated, respectively. The results show the feasibility and advantages of I-SC-FDM for cost-sensitive OWC systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design and fabrication of ring resonator spectral response through-drop wavelengths selective

In this paper, we discuss the basic characteristics of the SOI based micro-ring resonator, and understand the influence of the high refractive index difference and the small size on the spectral characteristics of the ring resonator. The novelty and importance of the spectral response selectivity of ring resonators is driven by the grating couple technique. This advantage is the periodic variation of the refractive index in the coupled grating, which will result in the coupling of the conduction wave modes. By means of measurement and simulation, observe the changes and trends of the spectrum in steady state and transient state, and finally analyze the performance of the ring resonator in the application of signal processing. It achieves polarization-independent grating couplers with high efficiency, wide bandwidth and low polarization-dependent loss at around the 1560 nm optical communication band. Drop end set laser wavelength correction 1591.9 nm.

36 MATERIALS SCIENCE↗

Investigation of resonant mode sensitivity in PhC based ring resonators

Quality factor and refractive index sensitivity are significant parameters in designing optical devices based on ring resonators such as filters, demultiplexers, switches in which the ring resonator is considered as an elementary componant. In this paper, we propose a photonic crystal ring resonator with super-ellipse shaped core. The proposed ring resonator placed between two parallels waveguides (bus waveguide and drop waveguide). The transmission efficiency of the proposed ring resonator at λ = 1547.3 nm is about 95% with bandwidth and quality factor values equal to 0.7 nm and 2210, respectively. Simulation results show that the resonance sensitivity upon refractive index variation of coupling, outer layer, adjacent and scattering rods are Δλ/Δn = 0.2 nm/0.01, Δλ/Δn = 0.225 nm/0.01, Δλ/Δn = 0.125 nm/0.01 and Δλ/Δn = 0.05 nm/0.01, respectively. The finite different time domain and plane wave expansion methods are used to calculate the outputs spectrum and band gap, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗