Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Three-photon laser excitation of mesoscopic ensembles of cold rubidium Rydberg atoms

The spectra of three-photon laser excitation (according to the {sup 5}S{sub 1/2} → {sup 5}P{sub 3/2} → {sup 6}S{sub 1/2} → {sup 37}P{sub 3/2} scheme) of mesoscopic ensembles of cold Rb Rydberg atoms in a magneto-optical trap, using cw single-frequency lasers in each stage, have been investigated. The ensembles consisted of 1 to 5 atoms, and their presence was recorded by the selective field ionisation method with postselection according to the number of atoms. The dependence of the spectral shape on the excitation laser pulse duration has been studied. For 2-μs pulses, the minimum spectral width was found to be 1.3 MHz; it was determined by the laser linewidth and the spectral width of laser pulse. For pulses shorter than 0.5 μs, additional spectral broadening and occurrence of Rabi oscillations in the wings of three-photon resonances have been observed, a fact indicative of implementation of coherent three-photon laser excitation of Rydberg atoms. An analysis of the spectra within the four-level theoretical model based on optical Bloch equations showed good agreement between the experimental and theoretical results. The dependence of the shape of three-photon excitation spectrum on the number of recorded atoms was also studied. An increase in the average number of atoms leads to the occurrence of a dip in the single-atom excitation spectra; this dip is due to the specificity of the excitation and detection statistics of Rydberg atoms. The results obtained are important for applications of Rydberg atoms in quantum informatics. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2012

ENERGY RELAXATION OF HELIUM ATOMS IN ASTROPHYSICAL GASES

We report accurate parameters describing energy relaxation of He atoms in atomic gases, important for astrophysics and atmospheric science. Collisional energy exchange between helium atoms and atomic constituents of the interstellar gas, heliosphere, and upper planetary atmosphere has been investigated. Energy transfer rates, number of collisions required for thermalization, energy distributions of recoil atoms, and other major parameters of energy relaxation for fast He atoms in thermal H, He, and O gases have been computed in a broad interval of energies from 10 meV to 10 keV. This energy interval is important for astrophysical applications involving the energy deposition of energetic atoms and ions into atmospheres of planets and exoplanets, atmospheric evolution, and analysis of non-equilibrium processes in the interstellar gas and heliosphere. Angular- and energy-dependent cross sections, required for an accurate description of the momentum-energy transfer, are obtained using ab initio interaction potentials and quantum mechanical calculations for scattering processes. Calculation methods used include partial wave analysis for collisional energies below 2 keV and the eikonal approximation at energies higher than 100 eV, keeping a significant energy region of overlap, 0.1-2 keV, between these two methods for their mutual verification. The partial wave method and the eikonal approximation excellently match results obtained with each other as well as experimental data, providing reliable cross sections in the astrophysically important interval of energies from 10 meV to 10 keV. Analytical formulae, interpolating obtained energy- and angular-dependent cross sections, are presented to simplify potential applications of the reported database. Thermalization of fast He atoms in the interstellar gas and energy relaxation of hot He and O atoms in the upper atmosphere of Mars are considered as illustrative examples of potential applications of the new database.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2011

Large-photon-number extraction from individual atoms trapped in an optical lattice

The atom-by-atom characterization of quantum gases requires the development of novel measurement techniques. One particularly promising new technique demonstrated in recent experiments uses strong fluorescent laser scattering from neutral atoms confined in a short-period optical lattice to measure the positions of individual atoms in the sample. A crucial condition for the measurements is that atomic hopping between lattice sites must be strongly suppressed despite substantial photon recoil heating. This paper models three-dimensional polarization gradient cooling of atoms trapped within a far-detuned optical lattice. The atomic dynamics are simulated using a hybrid Monte Carlo and master-equation analysis in order to predict the frequency of processes which give rise to degradation or loss of the fluorescent signal during measurements. It is shown, consistently with the experimental results, that there exists a wide parameter range in which the lifetime of strongly fluorescing isolated lattice-trapped atoms is limited by background gas collisions rather than radiative processes. In these cases the total number of scattered photons can be as large as 10{sup 8} per atom. The performance of the technique is related to relevant experimental parameters.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2013

Excitation of helium atoms in collisions with plasma electrons in an electric field

The rate constants are evaluated for excitation of helium atoms in metastable states by electron impact if ionized helium is located in an external electric field and is supported by it, such that a typical electron energy is small compared to the atomic excitation energy. Under these conditions, atomic excitation is determined both by the electron traveling in the space of electron energies toward the excitation threshold and by the subsequent atomic excitation, which is a self-consistent process because it leads to a sharp decrease in the energy distribution function of electrons, which in turn determines the excitation rate. The excitation rate constant is calculated for the regimes of low and high electron densities, and in the last case, it is small compared to the equilibrium rate constant where the Maxwell distribution function is realized including its tail. Quenching of metastable atomic states by electron impact results in excitation of higher excited states, rather than transition to the ground electron state for the electric field strengths under consideration. Therefore, at restricted electron number densities, the rate of emission of resonant photons of the wavelength 58 nm, which results from the transition from the 2{sup 1}P state of the helium atom to the ground state, is close to the excitation rate of metastable atomic states. The efficiency of atomic excitation in ionized helium, i.e., the part of energy of an electric field injected in ionized helium that is spent on atomic excitation, is evaluated. The results exhibit the importance of electron kinetics for an ionized gas located in an electric field.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Quantitative Electron Beam‐Single Atom Interactions Enabled by Sub‐20‐pm Precision Targeting

The ability to probe and control matter at the picometer scale is essential for advancing quantum and energy technologies. Scanning transmission electron microscopy offers powerful capabilities for materials analysis and modification, but sample damage, drift, and scan distortions hinder single atom analysis and deterministic manipulation. Materials analysis and modification via electron–solid interactions can be transformed by precise delivery of electrons to a specified atomic location, maintaining the beam position despite drift, and minimizing collateral dose. Here a fast, low-dose, sub-20-pm precision electron beam positioning technique is developed, “atomic lock-on,” (ALO), which offers the ability to position the beam on a specific atomic column without previously irradiating that column. This technique is used to lock onto a single selected atomic location to repeatedly measure its weak electron energy loss signal despite sample drift. Moreover, electron beam-matter interactions in single atomic events are measured with μ s time resolution. This enables observation of single-atom dynamics, such as atomic bistability, revealing partially bonded atomic configurations and recapture phenomena. This opens prospects for using electron microscopy for high-precision measurements and deterministic control of matter for quantum technologies.

2D materials↗
DOE OSTI2024

New insights into the mechanism of ultrasonic atomization for the production of metal powders in additive manufacturing

Ultrasonic atomization is one of the promising technologies for producing metal powders for additive manufacturing, where precise control of particle size and morphology is essential. In this study, we coupled an ultrasonic transducer with a carbon fiber plate and atomized liquid droplets and films under different vibration amplitudes. Water, glycerol, and pure aluminum melt were used to study the atomization mechanism and the resulting droplet/powder characteristics, respectively. High-speed optical and ultrafast synchrotron X-ray imaging were used to study in situ the ultrasonic atomization dynamics, including pulsation and clustering of cavities inside the liquid layer/films, development of capillary waves, and formation of liquid droplets. For the first time, we observed and captured the occurrence of cavitation during the atomization of resting drops, films and impact droplets. The inertial cavitation events interfered with the capillary waves across the interphase boundary, puncturing and breaking the boundary to produce atomized mist. The in situ observation revealed the intricate dynamics of ultrasonic atomization and underscored the pivotal role of cavitation events throughout the entire atomization process. We also conducted experiments on ultrasonic atomization of liquid aluminum, producing particles of perfectly spherical shape. The particle size tended to decrease with reduced vibration amplitude Our work has demonstrated the important processing strategies on how to tailor the particle size while ensuring consistent particle shape and morphology, which is the key processing capability for producing high quality powders for additive manufacturing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In-situ monitoring of atomically dispersed Pt sites supported on OMS-2 during CO 2 activation

Atomically dispersed catalysts have drawn great interest lately, as they showcase a high density of active sites, selectivity, and high turnover frequencies in oxidation chemistry due to labile oxygen activation. In contrast, the applications of these catalysts have lagged in reduction reactions due to the ambiguity caused by the sintering and restructuring of active sites. To bridge this gap, the evolution of Pt 4+ isomorphically substituted into an octahedral molecular sieve structure (OMS-2) under reductive conditions was correlatively characterized using multiple in-situ analytical techniques such as ambient pressure X-ray photoelectron spectroscopy, environmental transmission electron microscopy, and solid-state nuclear magnetic resonance. The surface dynamics of the Pt single atoms were revealed during the Reverse Water Gas Shift (RWGS) reaction, where the active sites were identified as two-coordinated platinum single atoms. Under reaction, we show nonbinding atoms adjacent to the single atoms restructured the motif of the single atoms to Pt 2+ via ion mobility of potassium, increasing the activation energy by 25.6 kJ/mol. Here, this work also highlights the potential for increased stability of the single atom sites via isomorphic substitution of the metal oxide support, since the Pt-OMS-2 catalyst retained activity for about 33 h before deactivation, after which nanoparticles were observed in TEM images. This work offers a new perspective in single atom synthesis using the metal oxide as the host for the single atom site, instead of adatoms on the surface

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Energetics of a Li Atom adsorbed on B/N doped graphene with monovacancy

We use density functional theory (DFT) to study the adsorption properties and diffusion of Li atom across B/N-pyridinic graphene. Regardless of the dopant type, B atoms of B-pyridinic graphene lose electron density. On the other hand, N atoms (p-type dopants) have tendency to gain electron density in N-pyridinic graphene. Higher chemical reactivity and electronic conductivity of B/N-pyridinic graphene are responsible for stronger binding of Li with the substrates as compared to pristine graphene. The binding energy of Li with B/N-pyridinic graphene exceeds the cohesive energy of bulk Li, making it energetically unfavourable for Li to form clusters on these substrates. Li atom gets better adsorbed on N-pyridinic graphene due to an additional p-p hybridization of the orbitals while Li on B-pyridinic prefers the ionic bonding. Also, significant distortion of N-pyridinic graphene upon Li adsorption is a consequence of the change in bonding mechanism between Li atom and the substrate. Our results show that bonding character and hence binding energies between Li and graphene can be tuned with the help of B/N doping of monovacancy defects. Further, the sites for most stable adsorption are different for the two types of doped and defective graphene, leading to greater Li uptake capacity of B-pyridinic graphene near the defect. In addition, B-pyridinic graphene offering lower diffusion barrier, ensures better Li kinetics. Thus, B-pyridinic graphene presents itself as a better anode material for LIBs as compared to N-pyridinic graphene. - Graphical abstract: Adsorption and diffusion of Li atom across the B/N doped monovacancy graphene is studied using ab-initio DFT calculations. Our results show that bonding mechanism and binding of Li with graphene can be tuned with the help of N/B doping of defects. Also, B-pyridinic graphene presents itself as a better anode material for lithium ion batteries as compared to N-pyridinic graphene. Display Omitted - Highlights: • Density functional theory (DFT) calculations are employed to study the effect of B/N doping of monovacancy graphene on the adsorption and diffusion of Li atom across the sheet using VASP. • Higher chemical reactivity and electronic conductivity of B/N-pyridinic graphene (p-type semiconductors) as compared to pristine graphene lead to stronger binding of Li. It also exceeds the cohesive energy of bulk Li. Thus, uniform distribution of Li atoms is possible on both substrates. • Li gets adsorbed stably at centre of defect in N-pyridinic graphene. B-pyridinic graphene has stable adsorption of Li at hollow site of hexagon, neighboring the defect, having only one boron atom. It leads to maximum Li uptake capacity of B-pyridinic graphene. • Li gets better adsorbed on N-pyridinic graphene due to an additional p-p hybridization of the orbitals. This change in bonding mechanism causes significant distortion of the substrate. On the other hand, Li on B-pyridinic graphene shows ionic bonding character. • B-pyridinic graphene offers lower energy barrier for Li to diffuse across the substrate in comparison to N-pyridinic graphene. Thus, B-pyridinic graphene presents itself as a better anode material for lithium ion batteries due to optimal Li adsorption and better diffusion kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Characterization of Cu{sub 6}Sn{sub 5} intermetallic powders produced by water atomization and powder heat treatment

Since the Cu{sub 6}Sn{sub 5} intermetallic shows its importance in industrial applications, the Cu{sub 6}Sn{sub 5} intermetallic-containing powders, produced by a powder processing route with a high production rate, were characterized. The route consisted of water atomization of an alloy melt (Cu–61 wt.% Sn) and subsequent heat treatment of the water-atomized powders. Characterization of the water-atomized powders and their heated forms was conducted by using X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Fine water-atomized powder microstructures consisted of primary hexagonal η-Cu{sub 6.25}Sn{sub 5} dendrites coexisting with interdendritic η-Cu{sub 6.25}Sn{sub 5} + β-Sn eutectic. Solidification of fine melt droplets was governed by surface nucleation and growth of the primary hexagonal η-Cu{sub 6.25}Sn{sub 5} dendrites followed by η-Cu{sub 6.25}Sn{sub 5} + β-Sn eutectic solidification of the remnant liquid. In coarse melt droplets, nucleation and growth of primary ε-Cu{sub 3}Sn dendrites were followed by peritectic reaction (ε-Cu{sub 3}Sn + liquid → η-Cu{sub 6.25}Sn{sub 5}) or direct crystallization of η-Cu{sub 6.25}Sn{sub 5} phase from the undercooled melt. Finally, the η-Cu{sub 6.25}Sn{sub 5} + β-Sn eutectic solidification of the remnant liquid occurred. Heating of the water-atomized powders at different temperatures resulted in microstructural homogenization. The water-atomized powders with mixed phases were transformed to powders with single monoclinic ή-Cu{sub 6}Sn{sub 5} phase. - Highlights: • The Cu{sub 6}Sn{sub 5} intermetallic powder production route was proposed. • Single phase Cu{sub 6}Sn{sub 5} powders could be by water atomization and heating. • Water-atomized Cu–Sn powders contained mixed Cu–Sn phases. • Solidification and heat treatment of water-atomized Cu–Sn powders are explained.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Oxidation of Silicon Carbide with Atomic Oxygen through the Passive-to-Active Transition

The inelastic and reactive scattering dynamics of O( 3 P) atoms on a 6H-silicon carbide (SiC) surface were investigated as a function of temperature with a molecular beam-surface scattering technique that employed a rotatable mass spectrometer detector. One set of experiments used a pulsed hyperthermal beam that produced ~8 km s –1 O atoms, and another set of experiments used a continuous beam that contained O atoms with a nominal velocity of ~2 km s –1 . When exposed to the relatively low-flux, pulsed hyperthermal O-atom beam, a passive oxide layer on the SiC that formed at lower temperatures decomposed as the temperature increased above 1673 K. Instead of entering an active oxidation regime, a graphitic layer formed on the surface and largely protected the underlying SiC from incoming O atoms. Investigation of the oxide decomposition without O-atom bombardment revealed volatile Si and SiO products at the moment that the oxide decomposed, implying that Si sublimation occurs concurrently with oxide decomposition. In the experiment with the continuous (higher flux) O-atom beam, volatile SiO and CO products were observed after the passive oxide decomposed, indicating that active oxidation was reached. Finally, the results of this study provide evidence for the importance of Si sublimation within the active oxidation regime. Above the passive-to-active transition temperature, Si sublimation is an ongoing process, and continuous active oxidation will only occur if sufficient oxygen reacts with the surface to produce SiO more quickly than a graphitic layer can form. Thus, accurate models of SiC ablation by atomic oxygen must account for multiple competing mechanisms that depend on the surface temperature and incident O-atom flux.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the Effects of the First Atomic Layer on the Dynamic Behavior of Sub-2 nm MgO/Al 2 O 3 Memristors

As electronic devices continue to scale down from the current sub-5 nm range, atomic-scale control of defects becomes increasingly crucial to suppressing their impact on the physical properties of the devices. Memristors present an excellent example as a nonlinear and dynamic device with high speed and endurance required for electronic applications ranging from neuromorphic computing to nonvolatile memories. Herein we investigate the impact of atomic defects in sub-2 nm thick MgO/Al 2 O 3 atomic layer stack (ALS) memristors that use an M1 (switching layer)/M2 (oxygen vacancy reservoir layer) bilayer structure grown using in vacuo atomic layer deposition (iALD). Intriguingly, we revealed a direct correlation of the atomic defects in the M2 layer with the memristor dynamic behavior using a combined analysis of in situ scanning tunneling spectroscopy (iSTS) on the M2 layer and ex situ characterization on the memristors. Specifically, incomplete coverage of the 1st ALD atomic layer of M2 on the electrode yields defects at the M2/electrode interface. Despite the monotonic increase of ALD coverage, by almost three-fold from ~30% to >90%, at completion of the M2 layer of ~ 0.7 nm in thickness, the impact of the defects on the M2/electrode interface has been found detrimental to both memristor switching speed and endurance. Guided by atomistic simulation, we addressed the issue of interface defects via tuning of the Al surface hydroxylation to increase the first atomic layer ALD coverage to ~75%, leading to improved memristor switching speed and endurance by several orders of magnitude. In conclusion, these findings shed light on the correlation between the atomic defects and the dynamic behavior of sub-2 nm memristors and the importance of minimizing the atomic defects in memristors for future electronic applications.

Atomic Layer Deposition↗
DOE OSTI2023

Double-Atom Catalysts Featuring Inverse Sandwich Structure for CO 2 Reduction Reaction: A Synergetic First-Principles and Machine Learning Investigation

Electrocatalytic CO 2 reduction reactions (CO 2 RR) based on scalable and highly efficient catalysis provide an attractive strategy for reducing CO 2 emissions. Here in this work, we combined first-principles density functional theory (DFT) and machine learning (ML) to comprehensively explore the potential of double-atom catalysts (DACs) featuring an inverse sandwich structure anchored on defective graphene (gra) to catalyze CO 2 RR to generate C 1 products. We started with five homonuclear M 2 ⊥gra (M = Co, Ni, Rh, Ir, and Pt), followed by 127 heteronuclear MM'⊥gra (M = Co, Ni, Rh, Ir, and Pt, M' = Sc–Au). Stable DACs were screened by evaluating their binding energy, formation energy, and dissolution potential of metal atoms, as well as conducting first-principles molecular dynamics simulations with and without solvent water molecules. Based on DFT calculations, Rh 2 ⊥gra DAC was found to outperform the other four homonuclear DACs and the Rh-based single- and double-atom catalysts of noninverse sandwich structures. Out of the 127 heteronuclear DACs, 14 were found to be stable and have good catalytic performance. An ML approach was adopted to correlate key factors with the activity and stability of the DACs, including the sum of radii of metal and ligand atoms (d M–M' , d M–C , and d M'–C ), the sum and difference of electronegativity of two metal atoms (P M + P M' , P M – P M '), the sum and difference of first ionization energy of two metal atoms (I M + I M' , I M – I M '), the sum and difference of electron affinity of two metal atoms (A M + A M' , A M – A M '), and the number of d-electrons of the two metal atoms (Nd). The obtained ML models were further used to predict 154 potential electrocatalysts out of 784 possible DACs featuring the same inverse sandwich configuration. Overall, this work not only identified promising CO 2 RR DACs featuring the reported inverse sandwich structure but also provided insights into key atomic characteristics associated with high CO 2 RR activity.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Characterization of just one atom using synchrotron X-rays

Since the discovery of X-rays by Roentgen in 1895, its use has been ubiquitous, from medical and environmental applications to materials sciences. X-ray characterization requires a large number of atoms and reducing the material quantity is a long-standing goal. Here we show that X-rays can be used to characterize the elemental and chemical state of just one atom. Using a specialized tip as a detector, X-ray-excited currents generated from an iron and a terbium atom coordinated to organic ligands are detected. The fingerprints of a single atom, the L 2,3 and M 4,5 absorption edge signals for iron and terbium, respectively, are clearly observed in the X-ray absorption spectra. The chemical states of these atoms are characterized by means of near-edge X-ray absorption signals, in which X-ray-excited resonance tunnelling (X-ERT) is dominant for the iron atom. The X-ray signal can be sensed only when the tip is located directly above the atom in extreme proximity, which confirms atomically localized detection in the tunnelling regime. Finally, our work connects synchrotron X-rays with a quantum tunnelling process and opens future X-rays experiments for simultaneous characterizations of elemental and chemical properties of materials at the ultimate single-atom limit.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2018

Low-temperature activation of methane on doped single atoms: descriptor and prediction

Catalytic transformation of methane under mild conditions remains a grand challenge. Fundamental understanding of C–H activation of methane is crucial for designing a catalyst for the utilization of methane at low temperature. Recent experiments show that strong methane chemisorption on oxides of precious metals leads to facile C–H activation. However, only a very few such oxides are capable (for example, IrO 2 and PdO). Here we show for the first time that strong methane chemisorption and facile C–H activation can be accomplished by single transition-metal atoms on TiO 2 , some of which are even better than IrO 2 . Using methane adsorption energy as a descriptor, we screened over 30 transition-metal single atoms doped on TiO 2 for the chemisorption of methane by replacing a surface Ti atom with a single atom of another transition metal. It is found that the adsorption energies of methane on a single atom of Pd, Rh, Os, Ir, and Pt doped on rutile TiO 2 (110) are greater than or similar to those on rutile IrO 2 (110), a benchmark for the chemisorption of methane on transition oxides. Electronic structure analysis uncovered orbital overlap and mixing between methane and the single atom, as well as significant localization of the charge between the molecule and the surface, demonstrating chemical bonding of CH 4 to doped single atoms. Facile C–H dissociation has been found on the single-atom sites with the transition state energies lower than desorption energies. We report our computational studies predict that Pd, Rh, Os, Ir, and Pt single atoms on rutile TiO 2 (110) can activate C–H of methane at a temperature lower than 25 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Hydrogen transport diagnostics by atomic and molecular emission line profiles simultaneously measured for large helical device

We observe the Balmer-{alpha}, -{beta}, and -{gamma} lines of hydrogen atoms and Q branches of the Fulcher-{alpha} band of hydrogen molecules simultaneously with their polarization resolved for large helical device. From the fit including the line splits and the polarization dependences by the Zeeman effect, the emission locations, intensities, and the temperatures of the atoms and molecules are determined. The emission locations of the hydrogen atoms are determined outside but close to the last closed flux surface (LCFS). The results are consistent with a previous work (Phys. Plasmas 12, 042501 (2005)). On the other hand, the emission locations of the molecules are determined to be in the divertor legs, which is farer from those of the atoms. The kinetic energy of the atoms is 1 {approx} 20 eV, while the rotational temperature of molecules is {approx}0.04 eV. Additionally, substantial wings, which originate from high velocity atoms and are not reproduced by the conventional spectral analysis, are observed in the Balmer line profiles. We develop a one-dimensional model to simulate the transport of the atoms and molecules. The model reproduces the differences of the emission locations of the atoms and molecules when their initial temperatures are assumed to be 3 eV and 0.04 eV, respectively. From the model, the wings of the Balmer-{alpha} line is attributed to the high velocity atoms exist deep inside the LCFS, which are generated by the charge exchange collisions with hot protons there.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2010

Cavity quantum electrodynamics with a Rydberg-blocked atomic ensemble

The realization of a Jaynes-Cummings model in the optical domain is proposed for an atomic ensemble. The scheme exploits the collective coupling of the atoms to a quantized cavity mode and the nonlinearity introduced by coupling to high-lying Rydberg states. A two-photon transition resonantly couples the single-atom ground state |g> to a Rydberg state |e> via a nonresonant intermediate state |i>, but due to the interaction between Rydberg atoms only a single atom can be resonantly excited in the ensemble. This restricts the state space of the ensemble to the collective ground state |G> and the collectively excited state |E> with a single Rydberg excitation distributed evenly on all atoms. The collectively enhanced coupling of all atoms to the cavity field with coherent coupling strengths which are much larger than the decay rates in the system leads to the strong coupling regime of the resulting effective Jaynes-Cummings model. We use numerical simulations to show that the cavity transmission can be used to reveal detailed properties of the Jaynes-Cummings ladder of excited states and that the atomic nonlinearity gives rise to highly nontrivial photon emission from the cavity. Finally, we suggest that the absence of interactions between remote Rydberg atoms may, due to a combinatorial effect, induce a cavity-assisted excitation blockade whose range is larger than the typical Rydberg dipole-dipole interaction length.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Cold atoms in space: community workshop summary and proposed road-map

We summarise the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with the European Space Agency (ESA) and national space and research funding agencies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2010

Advanced atom chips with two metal layers.

A design concept, device layout, and monolithic microfabrication processing sequence have been developed for a dual-metal layer atom chip for next-generation positional control of ultracold ensembles of trapped atoms. Atom chips are intriguing systems for precision metrology and quantum information that use ultracold atoms on microfabricated chips. Using magnetic fields generated by current carrying wires, atoms are confined via the Zeeman effect and controllably positioned near optical resonators. Current state-of-the-art atom chips are single-layer or hybrid-integrated multilayer devices with limited flexibility and repeatability. An attractive feature of multi-level metallization is the ability to construct more complicated conductor patterns and thereby realize the complex magnetic potentials necessary for the more precise spatial and temporal control of atoms that is required. Here, we have designed a true, monolithically integrated, planarized, multi-metal-layer atom chip for demonstrating crossed-wire conductor patterns that trap and controllably transport atoms across the chip surface to targets of interest.

42 ENGINEERING↗