Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

SeZnSb alloy and its nano tubes, graphene composites properties

Composite can alter the individual element physical property, could be useful to define the specific use of the material. Therefore, work demonstrates the synthesis of a new composition Se{sub 96}-Zn{sub 2}-Sb{sub 2} and its composites with 0.05% multi-walled carbon nano tubes and 0.05% bilayer graphene, in the glassy form. The diffused amorphous structure of the multi walled carbon nano tubes and bilayer gaphene in the Se{sub 96}-Zn{sub 2}-Sb{sub 2} alloy have been analyzed by using the Raman, X-ray photoluminescence spectroscopy, Furrier transmission infrared spectra, photoluminescence, UV/visible absorption spectroscopic measurements. The diffused prime Raman bands (G and D) have been appeared for the multi walled carbon nano tubes and graphene composites, while the X-ray photoluminescence core energy levels peak shifts have been observed for the composite materials. Subsequently the photoluminescence property at room temperature and a drastic enhancement (upto 80%) in infrared transmission percentage has been obtained for the bilayer graphene composite, along with optical energy band gaps for these materials have been evaluated 1.37, 1.39 and 1.41 eV.

36 MATERIALS SCIENCE↗

Enhanced thermoelectric performance in spark plasma textured bulk n-type BiTe{sub 2.7}Se{sub 0.3} and p-type Bi{sub 0.5}Sb{sub 1.5}Te{sub 3}

Bulk p and n-type bismuth tellurides were prepared using spark plasma texturization method. The texture development along the uniaxial load in the 001 direction is confirmed from both x-ray diffraction analysis and electron backscattering diffraction measurements. Interestingly, those textured samples outperform the samples prepared by conventional spark plasma sintering (SPS) leading to a reduced thermal conductivity in the ab-plane. The textured samples of n-type BiTe{sub 2.7}Se{sub 0.3} and p-type Bi{sub 0.5}Sb{sub 1.5}Te{sub 3} showed a 42% and 33% enhancement in figure of merit at room temperature, respectively, as compared to their SPS counterparts, opening the route for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Performance improvement of Ge-Sb-Te material by GaSb doping for phase change memory

Effects of GaSb doping on phase change characteristics of Ge-Sb-Te material are investigated by in situ resistance and x-ray diffraction measurement, optical spectroscopy, and x-ray photoelectron spectroscopy. The crystallization temperature and data retention of Ge-Sb-Te material increase significantly by the addition of GaSb, which results from the high thermal stability of amorphous GaSb. In addition, GaSb-doped Ge-Sb-Te material exhibits faster crystallization speed due to the change in electronic states as a result of the formation of chemical bonds with Ga element. Incorporation of GaSb is highly effective way to enhance the comprehensive performance of Ge-Sb-Te material for phase change memory.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy growth of high electron mobility InAs/AlSb deep quantum well structure

InAs/AlSb deep quantum well (QW) structures with high electron mobility were grown by molecular beam epitaxy (MBE) on semi-insulating GaAs substrates. AlSb and Al{sub 0.75}Ga{sub 0.25}Sb buffer layers were grown to accommodate the lattice mismatch (7%) between the InAs/AlSb QW active region and GaAs substrate. Transmission electron microscopy shows abrupt interface and atomic force microscopy measurements display smooth surface morphology. Growth conditions of AlSb and Al{sub 0.75}Ga{sub 0.25}Sb buffer were optimized. Al{sub 0.75}Ga{sub 0.25}Sb is better than AlSb as a buffer layer as indicated. The sample with optimal Al{sub 0.75}Ga{sub 0.25}Sb buffer layer shows a smooth surface morphology with root-mean-square roughness of 6.67 A. The electron mobility has reached as high as 27 000 cm{sup 2}/Vs with a sheet density of 4.54 Multiplication-Sign 10{sup 11}/cm{sup 2} at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of AlAs{sub x}Sb{sub 1-x} alloys determined by in situ ellipsometry

We report pseudodielectric function data <{epsilon}> = <{epsilon}{sub 1}> + i<{epsilon}{sub 2}> from 0.74 to 6.48 eV of oxide-free AlAsSb alloys that are the closest representation to date of the intrinsic bulk dielectric response {epsilon} of the material. Measurements were performed on 1.3 {mu}m thick films grown on (001) GaAs substrates by molecular beam epitaxy. Data were obtained with the films in situ to avoid oxidation artifacts. Critical-point structures were identified by band-structure calculations done with the linear augmented Slater-type orbital method. Crossings of transitions at the {Gamma}- and X-points and the {Gamma}- and L-points with composition were observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Switching of localized surface plasmon resonance of gold nanoparticles on a GeSbTe film mediated by nanoscale phase change and modification of surface morphology

As a platform for active nanophotonics, localized surface plasmon resonance (LSPR) switching via interaction with a chalcogenide phase change material (GeSbTe) was investigated. We performed single-particle spectroscopy of gold nanoparticles placed on a GeSbTe thin film. By irradiation with a femtosecond pulsed laser for amorphization and a continuous wave laser for crystallization, significant switching behavior of the LSPR band due to the interaction of GeSbTe was observed. The switching mechanism was explained in terms of both a change in the refractive index and a modification of surface morphology accompanying volume expansion and reduction of GeSbTe.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural transformations in amorphous ↔ crystalline phase change of Ga-Sb alloys

Ga-Sb alloys with compositions ranging between ∼12 and 50 at. % Ga are promising materials for phase change random access memory applications. The short-range structures of two such alloys with compositions Ga{sub 14}Sb{sub 86} and Ga{sub 46}Sb{sub 54} are investigated, in their amorphous and crystalline states, using {sup 71}Ga and {sup 121}Sb nuclear magnetic resonance spectroscopy and synchrotron x-ray diffraction. The Ga and Sb atoms are fourfold coordinated in the as-deposited amorphous Ga{sub 46}Sb{sub 54} with nearly 40% of the constituent atoms being involved in Ga-Ga and Sb-Sb homopolar bonding. This necessitates extensive bond switching and elimination of homopolar bonds during crystallization. On the other hand, Ga and Sb atoms are all threefold coordinated in the as-deposited amorphous Ga{sub 14}Sb{sub 86}. Crystallization of this material involves phase separation of GaSb domains in Sb matrix and a concomitant increase in the Ga coordination number from 3 to 4. Results from crystallization kinetics experiments suggest that the melt-quenching results in the elimination of structural “defects” such as the homopolar bonds and threefold coordinated Ga atoms in the amorphous phases of these alloys, thereby rendering them structurally more similar to the corresponding crystalline states compared to the as-deposited amorphous phases.

36 MATERIALS SCIENCE↗

Electronic structure and thermoelectric performance of Zintl compound Sr{sub 3}GaSb{sub 3}: A first-principles study

By using first-principles method and Boltzmann theory, we simulated the thermoelectric transport properties of p-type and n-type Sr{sub 3}GaSb{sub 3}. It is found that the thermoelectric figure-of merit (ZT) of n-type Sr{sub 3}GaSb{sub 3} is probably better than that of p-type, mainly due to its large band degeneracy. Moreover, a high ZT value of 1.74 at 850 K can be achieved for n-type Sr{sub 3}GaSb{sub 3} along the yy direction, corresponding to the carrier concentration 3.5 × 10{sup 20} e cm{sup −3}. We propose that the high ZT value of experimentally synthesized p-type Sr{sub 3}GaSb{sub 3} is originated from appearing of the larger number of band valley on the top of valence bands.

36 MATERIALS SCIENCE↗

Long-infrared InAs-based quantum cascade lasers operating at 291 K (λ=19 μm) with metal-metal resonators

We demonstrate quantum cascade lasers in the InAs/AlSb material system emitting at wavelengths of λ = 19 μm and λ = 21 μm. The maximum operating temperatures are 291 K and 250 K, and the threshold current densities at 78 K are as low as 0.6 kA/cm{sup 2} and 1.3 kA/cm{sup 2} for the lasers emitting at λ = 19 μm and λ = 21 μm, respectively. These values represent the best performance to date for quantum cascade lasers operating above λ = 16 μm. Although the devices employ metal-metal waveguide geometries, the diffraction effects which typically hinder the output beam of THz devices are not observed.

36 MATERIALS SCIENCE↗

Unusual magnetic hysteresis and the weakened transition behavior induced by Sn substitution in Mn{sub 3}SbN

Substitution of Sb with Sn was achieved in ferrimagnetic antiperovskite Mn{sub 3}SbN. The experimental results indicate that with an increase in Sn concentration, the magnetization continuously decreases and the crystal structure of Mn{sub 3}Sb{sub 1-x}Sn{sub x}N changes from tetragonal to cubic phase at around x of 0.8. In the doping series, step-like anomaly in the isothermal magnetization was found and this behavior was highlighted at x = 0.4. The anomaly could be attributed to the magnetic frustration, resulting from competition between the multiple spin configurations in the antiperovskite lattice. Meantime, H{sub c} of 18 kOe was observed at x = 0.3, which is probably the highest among those of manganese antiperovskite materials reported so far. With increasing Sn content, the abrupt change of resistivity and the sharp peak of heat capacity in Mn{sub 3}SbN were gradually weakened. The crystal structure refinements indicate the weakened change at the magnetic transition is close related to the change of c/a ratio variation from tetragonal to cubic with Sn content. The results derived from this study indicate that the behavior of Mn{sub 3}Sb{sub 1-x}Sn{sub x}N could potentially enhance its scientific and technical applications, such as spin torque transfer and hard magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of substituting Sn for Sb on the thermoelectric transport properties of CoSb{sub 3}-based skutterudites

Band structure calculations that incorporate impurity effects suggest that a band resonant state may be formed in p-type CoSb{sub 3}-based skutterudites by replacing Sb atoms with Sn dopant atoms. Such resonant states have the potential to greatly improve thermoelectric energy conversion efficiency by increasing the density of states variation near the Fermi level, thereby increasing the Seebeck coefficient at a given carrier concentration. Through transport measurements of the Seebeck coefficient, electrical conductivity, thermal conductivity, and Hall coefficient, we show that a practical band resonant state is not achieved by Sn doping. Compared to undoped CoSb{sub 3}, the dimensionless figure of merit (ZT) in Sn-doped CoSb{sub 3} is enhanced slightly at high temperatures to a value of 0.2, mostly due to a reduction in thermal conductivity. The Fermi level is calculated not to reach the band resonant state induced by Sn impurity atoms within the range of Sn concentrations examined here.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High thermoelectric performance in the multi-valley electronic system Zr{sub 3}Ni{sub 3−x}Co{sub x}Sb{sub 4} and the high-mobility Zr{sub 3}Ni{sub 3−x}Cu{sub x}Sb{sub 4}

We report synthesis and thermoelectric performance of the p-type Zr{sub 3}Ni{sub 3−x}Co{sub x}Sb{sub 4} and the n-type Zr{sub 3}Ni{sub 3−x}Cu{sub x}Sb{sub 4}, which are derived from the same parent semiconductor Zr{sub 3}Ni{sub 3}Sb{sub 4}. We found a high thermoelectric performance for both the p-type compound (the figure-of-merit ZT is 0.52 at 760 K) and the n-type compound (ZT = 0.41 at 670 K). ZT of the p-type compound exceeded the value of the p-type half-Heusler compounds consisting of similar elements. The Hall-coefficient measurements indicate that the high ZT in the n-type compounds is a consequence of the high electron mobility of 52.4 cm{sup 2}/Vs. In contrast, the p-type compounds showed higher ZT in spite of much lower mobility. We discuss the mechanism for the high ZT in the p-type compound from the viewpoint of the multi-valley band structure.

36 MATERIALS SCIENCE↗

Temporal evolution of nanoporous layer in off-normally ion irradiated GaSb

Room temperature irradiation of GaSb by 60 keV Ar{sup +}-ions at an oblique incidence of 60° leads to simultaneous formation of a nanoporous layer and undulations at the interface with the underlying substrate. Interestingly, with increasing ion fluence, a gradual embedding of the dense nanoporous layer takes place below ridge-like structures (up to the fluence of 1 × 10{sup 17} ions cm{sup −2}), which get extended to form a continuous layer (at fluences ≥4 × 10{sup 17} ions cm{sup −2}). Systematic compositional analyses reveal the co-existence of Ga{sub 2}O{sub 3} and Sb{sub 2}O{sub 3} in the surface layer. The results are discussed in terms of a competition between ion-induced defect accumulation and re-deposition of sputtered atoms on the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and development of thermoelectric generator

In this paper we discuss the fabrication, working and characteristics of a thermoelectric generator made up of p and n type semiconductor materials. The device consists of Fe{sub 0.2}Co{sub 3.8}Sb{sub 11.5}Te{sub 0.5} (zT = 1.04 at 818 K) as the n-type and Zn4Sb3 (zT=0.8 at 550 K) as the p-type material synthesized by vacuum hot press method. Carbon paste has been used to join the semiconductor legs to metal (Molybdenum) electrodes to reduce the contact resistance. The multi-couple (4 legs) generator results a maximum output power of 1.083 mW at a temperature difference of 240 K between the hot and cold sides. In this investigation, an I-V characteristic, maximum output power of the thermoelectric module is presented. The efficiency of thermoelectric module is obtained as η = 0.273 %.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InSb thin films grown by electrodeposition

We have grown InSb thin films on Cu substrates using the electrodeposition technique. The electrochemical bath from which the InSb thin films were grown was made up of a mixture of aqueous solutions of 0.05 M InCl{sub 3} and 0.03M SbCl{sub 3}, 0 .20M citric acid and 0.30M sodium citrate. Citric acid and sodium citrate were used as complexing agents to bring the reduction potential of In and Sb closer to maintain binary growth. The electrodeposited films were characterized by structural, morphological and optical studies. X-ray diffraction studies show that the films are polycrystalline InSb having the zinc blende structure. Scanning electron microscopy (SEM) studies reveal that the surface of the films is uniformly covered with submicron sized spherical particles. FTIR spectra of InSb thin films show a sharp absorption peak at wave number 1022 cm{sup −1} corresponding to the band gap. Hot probe analysis shows that the InSb thin films have p type conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural investigation on Ge{sub x}Sb{sub 10}Se{sub 90−x} glasses using x-ray photoelectron spectra

The structure of Ge{sub x}Sb{sub 10}Se{sub 90−x} glasses (x = 7.5, 10, 15, 20, 25, 27.5, 30, and 32.5 at. %) has been investigated by x-ray photoelectron spectroscopy (XPS). Different structural units have been extracted and characterized by decomposing XPS core level spectra, the evolution of the relative concentration of each structural unit indicates that, the relative contributions of Se-trimers and Se-Se-Ge(Sb) structure decrease with increasing Ge content until they become zero at chemically stoichiometric glasses of Ge{sub 25}Sb{sub 10}Se{sub 65}, and then the homopolar bonds like Ge-Ge and Sb-Sb begin to appear in the spectra. Increase of homopolar bonds will extend band-tails into the gap and narrow the optical band gap. Thus, the glass with a stoichiometric composition generally has fewer defective bonds and larger optical bandgap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of semiconductive binary Sb{sub 2}S{sub 3}–Yb{sub 3}S{sub 4} system on electrical conductivity property of epoxy composites

The purpose of this study is to develop the semiconductive composites. Semiconducting glass (SG) binary system Sb{sub 2}S{sub 3}–Yb{sub 3}S{sub 4} in mole ratio 1:1 was synthesized and was doped with I{sub 2}. Next, electrically conductive DGEBA-type epoxy resin (ER)/SG-filled composites and epoxy toluene oligomer (ETO) modified epoxy resin-SG filled composites were developed with 3–10 wt. % of fillers and characterized. As a result, the effects of the modifier and amount of semiconductive filler on the electrical properties of commercial epoxy resin were examined. Percolation concentration was 7 wt. % for all composites. For the SG-reinforced composites, the dispersion of the fillers is investigated by X-ray diffraction (XRD) and by scanning electron microscopy (SEM)

36 MATERIALS SCIENCE↗

Low-temperature heat capacity and localized vibrational modes in natural and synthetic tetrahedrites

The heat capacity of natural (Cu{sub 12−x} (Fe, Zn, Ag){sub x}(Sb, As){sub 4}S{sub 13}) and synthetic (Cu{sub 12−x}Zn{sub x}Sb{sub 4}S{sub 13} with x = 0, 1, 2) tetrahedrite compounds was measured between 2 K and 380 K. It was found that the temperature dependence of the heat capacity can be described using a Debye term and three Einstein oscillators with characteristic temperatures that correspond to energies of ∼1.0 meV, ∼2.8 meV, and ∼8.4 meV. The existence of localized vibrational modes, which are assigned to the displacements of the trigonally coordinated Cu atoms in the structure, is discussed in the context of anharmonicity and its effect on the low lattice thermal conductivity exhibited by these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗