Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALGORITHM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Implementation of a Six Degree of Freedom Precision Lunar Landing Algorithm Using Dual Quaternion Representation

In this study, a powered descent guidance algorithm using a unit dual quaternion represen- tation of the vehicle dynamics is implemented in a high-fidelity simulation and on representative flight hardware. This Dual-Quaternion Guidance (DQG) algorithm is applied to the precision lunar landing problem which levies complex constraints upon the trajectory, including state triggered attitude constraints to enable terrain-relative navigation and hazard detection as well as real-time requirements for landing site re-designation. The investigation explores DQG’s usefulness as a mission design tool as well as a real-time guidance algorithm and defines real-time performance requirements for the hazard detection and avoidance (HDA) re-targeting phase of precision lunar landing. The experiment is presented in two parts. First, DQG is implemented within a high-fidelity Monte Carlo simulation to tune the algorithm’s parameters for the simulated vehicle, to refine the mission design, and to develop guidance update timing requirements to perform the HDA maneuver. DQG generates trajectories online for the divert which are tracked by the vehicle’s inner-loop controllers to the targeted landing site. Second, DQG is run on representative hardware to demonstrate real-time operation through a divert maneuver. These results allow for rapid, flexible, optimal mission design satisfying complex constraints, and for the definition of real-time performance requirements for the HDA operations inherent in precision lunar landing. The HDA divert maneuver is found to require guidance trajectory updates in less than three seconds. DQG is found to be too slow to meet this update timing on the descent and landing computer (DLC) in its current implementation. DQG running on alternative hardware can meet the update rate requirement. Algorithm implementation improvements are also recommended which are expected to speed up computation sufficiently to meet requirements on the DLC.

GN&C↗
NASA NTRS2020

ICESat 2/ATLAS Onboard Flight Science Receiver Algorithms: Purpose, Process, and Performance

The Advanced Topographic Laser Altimetry System (ATLAS) is the sole instrument on the Ice, Cloud, and land Elevation Satellite 2 (ICESat-2). Without some method of reducing the transmitted data, the volume of ATLAS telemetry would far exceed the normal X-band downlink capability or require many more ground station contacts. The ATLAS Onboard Flight Science Receiver Algorithms (hereinafter Receiver Algorithms or Algorithms) control the amount of science data that is telemetered from the instrument, limiting the data volume by distinguishing surface echoes from background noise, and allowing the instrument to telemeter data from only a small vertical region about the signal. This is accomplished through the transfer of the spacecraft's location and attitude to the instrument every second, use of an onboard Digital Elevation Model, implementation of signal processing techniques, and use of onboard relief and surface type reference maps. Extensive ground testing verified the performance of the Algorithms. On-orbit analysis shows that the Algorithms are working as expected from the ground testing; they are performing well and meeting the mission requirements.

Algoritms, Signal Processing, Optimization, Flight↗
NASA NTRSDate not supplied

Self-consistent Quantum Iteratively Sparsified Hamiltonian Algorithm (SQuISH)

Due to coherence time limitations, reducing the resources required to run quantum algorithms and simulate physical systems on a quantum computer is crucial. With regards to Hamiltonian simulation, a significant effort has focused on building efficient algorithms using various factorizations and truncations, typically derived from the Hamiltonian alone. We introduce a new paradigm for improving Hamiltonian simulation and reducing the cost of ground state problems based on ideas recently developed for classical chemistry simulations. The key idea is that one can find efficient ways to reduce resources needed by quantum algorithms by making use of two key pieces of information: the Hamiltonian operator and an approximate ground state wavefunction. We refer to our algorithm as the self-consistent quantum iteratively sparsified Hamiltonian (SQuISH). By performing our scheme iteratively, one can drive SQuISH to create an accurate wavefunction using a truncated, resource-efficient Hamiltonian. By utilizing this more compact Hamiltonian, our algorithm provides an approach to reduce the gate complexity of ground state calculations on quantum hardware. As proof of principle, we implement SQuISH using configuration interaction for small molecules and coupled cluster for larger systems. Through our combination of approaches, we demonstrate how it performs on a range of systems, the largest of which would require more than 200 qubits to run on quantum hardware.

Diana Chamaki↗
NASA NTRS2023

High-Order Coronagraphic Wavefront Control With Algorithmic Differentiation: First Experimental Demonstration

Future space-based coronagraphs will rely critically on focal-plane wavefront sensing and control with deformable mirrors to reach deep contrast by mitigating optical aberrations in the primary beam path. Until now, most focal-plane wavefront control algorithms have been formulated in terms of Jacobian matrices, which encode the predicted effect of each deformable mirror actuator on the focal-plane electric field. A disadvantage of these methods is that Jacobian matrices can be cumbersome to compute and manipulate, particularly when the number of deformable mirror actuators is large. Recently, we proposed a new class of focal-plane wavefront control algorithms that utilize gradient-based optimization with algorithmic differentiation to compute wavefront control solutions while avoiding the explicit computation and manipulation of Jacobian matrices entirely. In simulations using a coronagraph design for the proposed Large UV/Optical/Infrared Surveyor (LUVOIR), we showed that our approach reduces overall CPU time and memory consumption compared to a Jacobian-based algorithm. Here, we expand on these results by implementing the proposed algorithm on the High Contrast Imager for Complex Aperture Telescopes (HiCAT) testbed at the Space Telescope Science Institute (STScI) and present initial experimental results, demonstrating contrast suppression capabilities equivalent to Jacobian-based methods.

wavefront control↗
NASA NTRSDate not supplied

Do Better Satellite Precipitation Algorithms Improve Landslide Hazard Assessment?

Satellites make it possible to estimate precipitation in near real time. Given the challenges of achieving global coverage by other means, these data are used widely. However, few systems for landslide hazard assessment rely on satellite precipitation estimates. This could be due in part to perceptions of accuracy, although latency, spatial resolution, and other factors may also be important. We test whether recent changes to data streams from the Global Precipitation Measurement mission (GPM) have improved its potential for use in landslide prediction. Specifically, we examine data produced by the Integrated Multi-satellitERetrievals for the GPM (IMERG) algorithm, which was upgraded to version 7 this year. IMERG relies upon other algorithms, including the Goddard Profiling Algorithm (GPROF) and the GPM Combined Radar-Radiometer Algorithm (CORRA). Many changes have been made during the switch from IMERG version 6 to version 7. These include upgrading CORRA and GPROF to version 7, to improve the accuracy of precipitation in frozen, mountainous, and coastal areas. The measured intensity of some storms has been enhanced with a new algorithm, the Scheme for Histogram Adjustment with Ranked Precipitation Estimates in the Neighborhood. Combined with many others, these changes to IMERG should improve its utility for landslide hazard assessment in a variety of contexts. To test this idea, we retrain the global Landslide Hazard Assessment for Situational Awareness (LHASA) model twice—first with data from IMERG version 6B and second with 7B. Since current daily rainfall is the most important variable in determining outcomes predicted by LHASA, it should reflect changes made to that input. First, we grid the landslides at a daily, thirty-arcsecond resolution. This serves as the response variable. At each of these sites current and antecedent rainfall are extracted, along with antecedent snow mass and soil moisture, slope, and PGA. In addition, one million grid cells are selected at random points to represent conditions under which landslides (probably) do not occur. After merging these data, we hold back 20% of the dataset for validation purposes and train a machine-learning model with the rest. We assess both the model’s overall ability to identify landslides and its ability to predict specific large landslide disasters.

Thomas A Stanley↗
NASA NTRS2024

A Computationally Efficient Algorithm for Sampling the Rudd Differential Cross Section

Monte Carlo radiation transport codes such as RITRACKS or Geant4 are used to simulate the interaction of ions with matter. These codes rely on sampling algorithms to determine interactions and various physical properties of particles involved in the simulations. It is crucial to develop efficient sampling algorithms since Monte Carlo radiation transport simulations can be time consuming. This work presents an efficient sampling algorithm to determine the energy of secondary electrons following ion-water interactions. The applicability and intended use of the algorithm are discussed in detail, and it is shown that the new algorithm is up to 6X10 4 times faster than the method currently used in Geant4-DNA.

Floriane Poignant↗
DOE OSTI2014

A Unified Differential Evolution Algorithm for Global Optimization

Abstract?In this paper, we propose a new unified differential evolution (uDE) algorithm for single objective global optimization. Instead of selecting among multiple mutation strategies as in the conventional differential evolution algorithm, this algorithm employs a single equation as the mutation strategy. It has the virtue of mathematical simplicity and also provides users the flexbility for broader exploration of different mutation strategies. Numerical tests using twelve basic unimodal and multimodal functions show promising performance of the proposed algorithm in comparison to convential differential evolution algorithms.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Microstructure Reconstruction of Sheet Molding Composite Using a Random Chips Packing Algorithm

Fiber-reinforced polymer composites are strong candidates for structural materials to replace steel and light alloys in lightweight vehicle design because of their low density and relatively high strength. In the integrated computational materials engineering (ICME) development of carbon fiber composites, microstructure reconstruction algorithms are needed to generate material microstructure representative volume element (RVE) based on the material processing information. The microstructure RVE reconstruction enables the material property prediction by finite element analysis (FEA)This paper presents an algorithm to reconstruct the microstructure of a chopped carbon fiber/epoxy laminate material system produced by compression molding, normally known as sheet molding compounds (SMC). The algorithm takes the result from material’s manufacturing process as inputs, such as the orientation tensor of fibers, the chopped fiber sheet geometry, and the fiber volume fraction. The chopped fiber sheets are treated as deformable rectangle chips and a random packing algorithm is developed to pack these chips into a square plate. The RVE is built in a layer-by-layer fashion until the desired number of lamina is reached, then a fine tuning process is applied to finalize the reconstruction. Compared to the previous methods, this new approach has the ability to model bended fibers by allowing limited amount of overlaps of rectangle chips. Furthermore, the method does not need SMC microstructure images, for which the image-based characterization techniques have not been mature enough, as inputs. Case studies are performed and the results show that the statistics of the reconstructed microstructures generated by the algorithm matches well with the target input parameters from processing.

Huang, Tianyu↗
DOE OSTI2021

Hardware-in-the-Loop Evaluation of an Advanced Distributed Energy Resource Management Algorithm

This paper presents the laboratory performance evaluation of voltage regulation under a new distributed energy resource management system (DERMS) algorithm via an advanced hardware-in-the-loop (HIL) platform. The HIL platform provides realistic testing in a laboratory environment, including the accurate modeling of a full-scale real-world distribution system from a utility partner, the DERMS software controller, and power hardware photovoltaic (PV) inverters. The new DERMS algorithm is developed based on online multi-objective optimization (OMOO) algorithms that perform fast dispatch of distributed solar PV simulated in a real-time digital simulator and real physical hardware devices. Experimental tests confirm the correct functioning of the HIL platform for evaluating controller algorithms and satisfactory voltage regulation performance of the developed OMOO algorithms.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

Hardware-in-the-Loop Evaluation of an Advanced Distributed Energy Resource Management Algorithm: Preprint

This paper presents the laboratory performance evaluation of voltage regulation under a new distributed energy resource management system (DERMS) algorithm via an advanced hardware-in-tbe-loop (HIL) platform. The HIL platform provides realistic testing in a laboratory environment, including the accurate modeling of a full-scale real-world distribution system from a utility partner, the DERMS software controller, and power hardware photovoltaic (PV) inverters. The new DERMS algorithm is developed based on online multiobjective optimization (OMOO) algorithms that perform fast dispatch of distributed solar PV simulated in a real-time digital simulator and real physical hardware devices. Experimental tests confirm the correct functioning of the HIL platform for evaluating controller algorithms and satisfactory voltage regulation performance of the developed OMOO algorithms.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

A Computationally Improved Heuristic Algorithm for Transmission Switching Using Line Flow Thresholds for Load Shed Reduction

We present a computationally improved heuristic algorithm for transmission switching (TS) to recover load shed. Research from the past showed that changing power system topology may control power flows and remove line congestion. Hence, TS may reduce the required load shed. One of the main challenges is to find a potential TS candidate in a suitable time. Here, we propose a novel heuristic method that is capable of finding the potential TS candidate faster than existing algorithms in literature. The proposed method is compatible with both the AC and DC optimal power flows (OPF). Three metrics are used to compare the proposed algorithm with the state-of-the-art from literature to show the speedup and accuracy achieved. The proposed method is implemented on the IEEE 30-bus system, PEGASE 89-bus system, IEEE 118-bus system, and Polish 2383- bus system. The results on the large-scale Polish 2383-bus system shows that the proposed algorithm is scalable to large real-world systems. Parallel computing is implemented to further improve the computational performance of the proposed algorithm.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Reducing the cost of energy estimation in the variational quantum eigensolver algorithm with robust amplitude estimation

Quantum chemistry and materials is one of the most promising applications of quantum computing. Yet much work is still to be done in matching industry-relevant problems in these areas with quantum algorithms that can solve them. Most previous efforts have carried out resource estimations for quantum algorithms run on large-scale fault-tolerant architectures, which include the quantum phase estimation algorithm. In contrast, few have assessed the performance of near-term quantum algorithms, which include the variational quantum eigensolver (VQE) algorithm. Recently, a large-scale benchmark study [Gonthier et al. 2020] found evidence that the performance of the variational quantum eigensolver for a set of industry-relevant molecules may be too inefficient to be of practical use. This motivates the need for developing and assessing methods that improve the efficiency of VQE. In this work, we predict the runtime of the energy estimation subroutine of VQE when using robust amplitude estimation (RAE) to estimate Pauli expectation values. Under conservative assumptions, our resource estimation predicts that RAE can reduce the runtime over the standard estimation method in VQE by one to two orders of magnitude. Despite this improvement, we find that the runtimes are still too large to be practical. These findings motivate two complementary efforts towards quantum advantage: 1) the investigation of more efficient near-term methods for ground state energy estimation and 2) the development of problem instances that are of industrial value and classically challenging, but better suited to quantum computation.

Johnson, Peter D.↗
DOE OSTI2024

A new track finding algorithm based on a multi-dimensional extension of the Hough Transform

We introduce a new pattern recognition algorithm for track finding in High Energy Physics Experiments based on an extension of the Hough Transform to multiple dimensions. A remarkable property of this algorithm is that the execution time is simply proportional to the total number of the hits to be processed, making it particularly attractive for high occupancy situations. The algorithm needs to be trained using a sufficiently large set of simulated tracks. The same track finding algorithm can be used for very different detector geometries and only the set of simulated tracks used for training needs to be changed. The particular structure of the algorithm also lends itself naturally to parallel hardware implementations which, combined with its intrinsic flexibility, should provide a most powerful tool for triggering at future colliders.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

An Accelerated Clip Algorithm for Unstructured Meshes: A Batch-Driven Approach

The clip technique is a popular method for visualizing complex structures and phenomena within 3D unstructured meshes. Meshes can be clipped by specifying a scalar isovalue to produce an output unstructured mesh with its external surface as the isovalue. Similar to isocontouring, the clipping process relies on scalar data associated with the mesh points, including scalar data generated by implicit functions such as planes, boxes, and spheres, which facilitates the visualization of results interior to the grid. In this paper, we introduce a novel batch-driven parallel algorithm based on a sequential clip algorithm designed for high-quality results in partial volume extraction. Our algorithm comprises five passes, each progressively processing data to generate the resulting clipped unstructured mesh. The novelty lies in the use of fixed-size batches of points and cells, which enable rapid workload trimming and parallel processing, leading to a significantly improved memory footprint and run-time performance compared to the original version. On a 32-core CPU, the proposed batch-driven parallel algorithm demonstrates a run-time speed-up of up to 32.6x and a memory footprint reduction of up to 4.37x compared to the existing sequential algorithm. The software is currently available under an open-source license in the VTK visualization system.

Tsalikis, Spiros↗
DOE OSTI2025

Randomized Adiabatic Quantum Linear Solver Algorithm with Optimal Complexity Scaling and Detailed Running Costs

Solving linear systems of equations is a fundamental problem with a wide variety of applications across many fields of science, and there is increasing effort to develop quantum linear solver algorithms. Subaşı et al. [Phys. Rev. Lett. 122, 060504 (2019)] proposed a randomized algorithm inspired by adiabatic quantum computing, based on a sequence of random Hamiltonian simulation steps, with suboptimal scaling in the condition number 𝜅 of the linear system and the target error 𝜖. Here we go beyond these results in several ways. Firstly, using filtering [Lin and Tong, Quantum 4, 361 (2020)] and Poissonization techniques [Cunningham and Roland, ArXiv:2406.03972 (2024)], the algorithm complexity is improved to the optimal scaling 𝑂⁡(𝜅⁢log (1/𝜖))—an exponential improvement in 𝜖, and a shaving of a log 𝜅 scaling factor in 𝜅. Secondly, the algorithm is further modified to achieve constant factor improvements, which are vital as we progress towards hardware implementations on fault-tolerant devices. We introduce a cheaper randomized walk operator method replacing Hamiltonian simulation—which also removes the need for potentially challenging classical precomputations; randomized routines are sampled over optimized random variables; circuit constructions are improved. We obtain a closed formula rigorously upper bounding the expected number of times one needs to apply a block-encoding of the linear system matrix to output a quantum state encoding the solution to the linear system. The upper bound is 837⁢𝜅 at 𝜖 = 10 −10 for Hermitian matrices.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Plug-and-Play Methods for Integrating Physical and Learned Models in Computational Imaging: Theory, algorithms, and applications

Plug-and-play (PnP) priors constitute one of the most widely used frameworks for solving computational imaging problems through the integration of physical models and learned models. PnP leverages high-fidelity physical sensor models and powerful machine learning methods for prior modeling of data to provide state-of-the-art reconstruction algorithms. PnP algorithms alternate between minimizing a data fidelity term to promote data consistency and imposing a learned regularizer in the form of an image denoiser. Recent highly successful applications of PnP algorithms include biomicroscopy, computerized tomography (CT), magnetic resonance imaging (MRI), and joint ptychotomography. This article presents a unified and principled review of PnP by tracing its roots, describing its major variations, summarizing main results, and discussing applications in computational imaging. Additionally, we also point the way toward further developments by discussing recent results on equilibrium equations that formulate the problem associated with PnP algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

A Quantum-Inspired Tensor Network Algorithm for Constrained Combinatorial Optimization Problems

Combinatorial optimization is of general interest for both theoretical study and real-world applications. Fast-developing quantum algorithms provide a different perspective on solving combinatorial optimization problems. In this paper, we propose a quantum-inspired tensor-network-based algorithm for general locally constrained combinatorial optimization problems. Our algorithm constructs a Hamiltonian for the problem of interest, effectively mapping it to a quantum problem, then encodes the constraints directly into a tensor network state and solves the optimal solution by evolving the system to the ground state of the Hamiltonian. We demonstrate our algorithm with the open-pit mining problem, which results in a quadratic asymptotic time complexity. Our numerical results show the effectiveness of this construction and potential applications in further studies for general combinatorial optimization problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Extended Barton–Bandis model for rock joints under cyclic loading: Formulation and implicit algorithm

In this paper, the Barton–Bandis model for rock joints is extended to cyclic loading conditions, without any new material parameter. Also developed herein is an implicit solution algorithm for the extended Barton–Bandis model, which can also be used for the original Barton–Bandis model for which an implicit algorithm has been unavailable. To this end, we first cast the Barton–Bandis model into an incremental elasto-plastic framework, deriving an expression for the elastic shear stiffness being consistent with the original model formulation. We then extend the model formulation to cyclic loading conditions, incorporating the dependence of shear stress and dilation on the joint position and the shearing direction. The extension is achieved by introducing a few state-dependent variables which can be calculated with the existing material parameters. For robust and accurate utilization of the model, we also develop an implicit algorithm based on return mapping, which is unconditionally stable and guarantees the satisfaction of the strength criterion. We verify that the proposed model formulation and algorithm produce virtually the same results as the original Barton–Bandis model under monotonic shearing conditions. Here, we then validate the extended Barton–Bandis model against experimental data on natural rock joints under cycling loading conditions. The present work thus enables the Barton–Bandis model, which has been exceptionally popular in research and practice, to be applicable to a wider range of problems in rock mechanics and rock engineering.

58 GEOSCIENCES↗