Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “39”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

The Reductive Leaching of Chalcopyrite by Chromium(II) Chloride for the Rapid and Complete Extraction of Copper

A hydrometallurgical process is developed to lower the costs of copper production and thereby sustain the use of copper throughout the global transition to renewable energy technologies. The unique feature of the hydrometallurgical process is the reductive treatment of chalcopyrite, which is in contrast to the oxidative treatment more commonly pursued in the literature. Chalcopyrite reduction by chromium(II) ion is described for the first time and superior kinetics are shown. At high concentrate loadings of 39, 78, and 117 gL –1 , chalcopyrite reacted completely within minutes at room temperature and pressure. The XRD, SEM-EDS, and XPS measurements indicate that chalcopyrite reacts to form copper(I) chloride (CuCl). After the reductive treatment, the mineral products are leached by iron(III) sulfate to demonstrate the complete extraction of copper. The chromium(II) ion may be regenerated by an electrolysis unit inspired by an iron chromium flow battery in a practical industrial process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical and microstructural characterization of sulfonated pentablock copolymer membranes

ABSTRACT Creep experiments utilizing a membrane inflation geometry were used to characterize the mechanical properties of pentablock copolymer membranes designed for water purification applications. Membranes were formed by casting from micellar solutions, and structure development during the casting process was followed in real time with grazing incidence small angle X‐ray scattering. The thin film morphologies were consistent with previously published results obtained for much thicker solvent cast films. The biaxial creep compliance of the films for applied stresses in the megapascal range increased substantially as the degree of sulfonation and consequent hydration of the middle block was increased. The sulfonation level was much more important than the overall degree of ordering in determining the creep compliance of the hydrated membranes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53 , 39–47

Laprade, Evan J.↗

Lattice Dynamics of Sb 2 Se 3 from Inelastic Neutron and X-Ray Scattering

The lattice dynamics of orthorhombic Sb 2 Se 3 is studied by a combination of inelastic neutron and 121 Sb nuclear inelastic scattering giving access to the total and Sb partial density of phonon states (DPS). The Se partial DPS is determined from the difference between the total and Sb partial DPS. The total DPS is determined at 39, 150, and 300 K, and an analysis of the temperature-induced mode shifts in combination with low-temperature powder diffraction data is provided. Using an earlier reported theoretical approach, the corresponding total and partial DPS of Sb 2 Se 3 are calculated by first-principles calculations. Herein, a detailed analysis of the Grüneisen parameter, element-specific and bulk Debye temperatures, and the mean force constants as derived from the experimental data and discrete Fourier transform calculations is provided. In general, the calculations underestimate the strength of the covalent Sb-Se bonds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dilute Regeneration-Driven Membrane Capacitive Deionization of Synthetic Seawater Using Nanopatterned Membranes and Prussian Blue Analog Electrodes

Membrane capacitive deionization (MCDI) offers energy-efficient seawater desalination but is limited at high salinity by membrane resistance and incomplete electrode regeneration. Nanopatterned ion-exchange membranes, dilute regeneration protocols, and Prussian blue analog (PBA)-functionalized electrodes are combined in a flow-by-MCDI cell. Nanopatterned ion-exchange membranes (hexagonal, octagonal, double-ring, rectangular) enhance interfacial ion transport, with hexagonal geometry delivering ≈12.5% greater surface area and the best performance. PBA-functionalized electrodes increase salt adsorption and charge-transfer kinetic rates. The integrated system lowers the area-specific resistance by 45 Ω cm2, resulting in a 500 mV reduction in the cell voltage for a current density of 2 mA cm−2 for a 35 000 ppm NaCl feed. This improves the energy-normalized salt adsorption six fold (64–382 mmol J−1). Low salinity (2000 ppm) and mixed-salt regeneration sustains a ≈39% water recovery and stable performance for at least seven cycles. Overall, combining nanopatterned membranes, which promote confinement-enhanced ion mobility, and PBA electrodes, which enhance salt adsorption, improved the energy efficiency of MCDI.

Hasan, Mahmudul↗

Outbreak investigations of foot and mouth disease virus in Nepal between 2010 and 2015 in the context of historical serotype occurrence

Abstract Foot and Mouth Disease ( FMD ) is endemic in Nepal and causes substantial economic losses in the livestock industry. The goal of this study was to perform an epidemiological analysis of FMD outbreaks reported to the Veterinary Epidemiology Center, Tripureshwor, Nepal during 2010–2015, in order to strengthen the National FMD Control Program. These current data were considered in the context of historical data on FMD virus ( FMDV ) serotypes detected in the country between 1965 and 2015. During 2010–2015, a total of 1333 livestock holdings reported FMD outbreaks in Nepal. On average, 71.2 animals were affected in each outbreak, with a case fatality rate of 3.6%. FMD was reported throughout the country, and the proportion of affected holdings was not significantly among eco‐zones, regions, or species. The Hill eco‐zone had the highest number of holdings affected (782), followed by Mountain (304), and Terai (247). When analysed by the developmental region, the Western (381) and Central (368) Developmental Regions had the highest numbers of holdings affected. Cattle were the most frequently affected species (39%), followed by buffalo (33%), and goats (19%). FMD occurred throughout the year, with peaks in winter (December/January) and in the pre‐monsoon period (April/May). Between 1965 and 2015 FMDV serotype O had the highest prevalence (81%), followed by Asia‐1 (11%), A (6%), and C (2%). Serotype C was not detected after 1996, and only serotype O was reported after 2011. These descriptive analyses provide critical landmarks to establish baselines, and document early progress of the ongoing Progressive Control Pathway of FMD ( PCP ‐ FMD ) which could be useful in Nepal and other South Asian nations.

59 BASIC BIOLOGICAL SCIENCES↗

Oil Biodegradation in Deep Marine Basins

Nine important hydrocarbon (oil) basins where offshore petroleum leases have been licensed are compared. These nine basins (Gulf of Mexico, Eastern Mediterranean’s Nile Deep-Sea Fan, Central Mediterranean and the Sirte Basin, North Sea, Caspian Sea, Angola, Trinidad and Tobago, Great Australian Bight, and Brazil’s Amazonian Deep-Sea Basin) are geographically separated and are impacted by very different water masses. The geochemical parameters of these basins are quite distinct, for example, salinities ranging from 39 psu in the Eastern Mediterranean to 12 psu in the Caspian. Additionally, parameters like temperatures of the bottom water are also very distinct, with the temperature in the deep water of the Eastern Mediterranean being between 12 °C and 14 °C and the temperature of the deep water in the North Sea being -2 °C. Each basin represents a unique ecosystem in which distinct microbes may thrive. These distinct environmental parameters may act to constrain the extent of hydrocarbon degradation in these basins. Another potential constraint on hydrocarbon degradation is the extent of natural hydrocarbon seeps in the area. Though many basins have similar if not 16S rRNA identical strains of oil-degrading bacteria, Colwellia psychrerythraea from different basins showed that a mixture of natural selection and neutral evolution has contributed to the divergence of these. Most if not all deep ocean basin microbial communities are dominated by Thaumarchaeota below 200 m. These microaerophilic, ammonium oxidizer, psychrophiles are very adapted to an oligotrophic lifestyle, and though many in this group will degrade oil, they are rapidly outcompeted by other bacteria in oil or high hydrocarbon intrusions, thus the virtual “canary in the coal mine.” Cometabolic biodegradation of oil is well documented but could be an important natural attenuation mechanism for oil in deep marine basins with episodic methane seeps. Microbial community structure can also predict concentrations of oil in deep basins. Many other synergistic effects require more research in environmental systems biology in deep marine basins.

Hazen, Terry C.↗

Measurement of the transverse momentum spectrum of the Higgs boson produced in pp collisions at $ \sqrt{s}=8 $ TeV using $H \to WW$ decays

The cross section for Higgs boson production in pp collisions is studied using the H → W$^{+}$W$^{−}$ decay mode, followed by leptonic decays of the W bosons to an oppositely charged electron-muon pair in the final state. The measurements are performed using data collected by the CMS experiment at the LHC at a centre-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 19.4 fb$^{−1}$. The Higgs boson transverse momentum (p$_{T}$) is reconstructed using the lepton pair p$_{T}$ and missing p$_{T}$. The differential cross section times branching fraction is measured as a function of the Higgs boson p$_{T}$ in a fiducial phase space defined to match the experimental acceptance in terms of the lepton kinematics and event topology. The production cross section times branching fraction in the fiducial phase space is measured to be 39 ± 8 (stat) ± 9 (syst) fb. The measurements are found to agree, within experimental uncertainties, with theoretical calculations based on the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Axial resonances a$_{1}$(1260), b$_{1}$(1235) and their decays from the lattice

The light axial-vector resonances $a_1(1260)$ and $b_1(1235)$ are explored in Nf=2 lattice QCD by simulating the corresponding scattering channels $\rho\pi$ and $\omega\pi$. Interpolating fields $\bar{q} q$ and $\rho\pi$ or $\omega\pi$ are used to extract the s-wave phase shifts for the first time. The $\rho$ and $\omega$ are treated as stable and we argue that this is justified in the considered energy range and for our parameters $m_\pi\simeq 266~$MeV and $L\simeq 2~$fm. We neglect other channels that would be open when using physical masses in continuum. Assuming a resonance interpretation a Breit-Wigner fit to the phase shift gives the $a_1(1260)$ resonance mass $m_{a1}^{res}=1.435(53)(^{+0}_{-109})$ GeV compared to $m_{a1}^{exp}=1.230(40)$ GeV. The $a_1$ width $\Gamma_{a1}(s)=g^2 p/s$ is parametrized in terms of the coupling and we obtain $g_{a_1\rho\pi}=1.71(39)$ GeV compared to $g_{a_1\rho\pi}^{exp}=1.35(30)$ GeV derived from $\Gamma_{a1}^{exp}=425(175)$ MeV. In the $b_1$ channel, we find energy levels related to $\pi(0)\omega(0)$ and $b_1(1235)$, and the lowest level is found at $E_1 \gtrsim m_\omega+m_\pi$ but is within uncertainty also compatible with an attractive interaction. Lastly, assuming the coupling $g_{b_1\omega\pi}$ extracted from the experimental width we estimate $m_{b_1}^{res}=1.414(36)(^{+0}_{-83})$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Differential $t\overline{t}$ cross-section measurements using boosted top quarks in the all-hadronic final state with 139 fb -1 of ATLAS data

Measurements of single-, double-, and triple-differential cross-sections are presented for boosted top-quark pair-production in 13 TeV proton–proton collisions recorded by the ATLAS detector at the LHC. The top quarks are observed through their hadronic decay and reconstructed as large-radius jets with the leading jet having transverse momentum (pT) greater than 500 GeV. The observed data are unfolded to remove detector effects. The particle-level cross-section, multiplied by the $t\overline{t}$ $\rightarrow$ $WWb$$\overline{b}$ branching fraction and measured in a fiducial phase space defined by requiring the leading and second-leading jets to have p T > 500 GeV and p T > 350 GeV, respectively, is 331 ± 3(stat.) ± 39(syst.) fb. This is approximately 20% lower than the prediction of ${398}^{+48}_{-49}$ fb by POWHEG+PYTHIA 8 with next-to-leading-order (NLO) accuracy but consistent within the theoretical uncertainties. Results are also presented at the parton level, where the effects of top-quark decay, parton showering, and hadronization are removed such that they can be compared with fixed-order next-to-next-to-leading-order (NNLO) calculations. The parton-level cross-section, measured in a fiducial phase space similar to that at particle level, is 1.94 ± 0.02(stat.) ± 0.25(syst.) pb. This agrees with the NNLO prediction of ${1.96}^{+0.02}_{-0.17}$ pb. Reasonable agreement with the differential cross-sections is found for most NLO models, while the NNLO calculations are generally in better agreement with the data. The differential cross-sections are interpreted using a Standard Model effective field-theory formalism and limits are set on Wilson coefficients of several four-fermion operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for coherent elastic neutrino-nucleus scattering at a nuclear reactor with CONNIE 2019 data

The Coherent Neutrino-Nucleus Interaction Experiment (CONNIE) is taking data at the Angra 2 nuclear reactor with the aim of detecting the coherent elastic scattering of reactor antineutrinos with silicon nuclei using charge-coupled devices (CCDs). In 2019 the experiment operated with a hardware binning applied to the readout stage, leading to lower levels of readout noise and improving the detection threshold down to 50 eV. The results of the analysis of 2019 data are reported here, corresponding to the detector array of 8 CCDs with a fiducial mass of 36.2 g and a total exposure of 2.2 kg-days. The difference between the reactor-on and reactor-off spectra shows no excess at low energies and yields upper limits at 95% confidence level for the neutrino interaction rates. In the lowest-energy range, 50 − 180 eV, the expected limit stands at 34 (39) times the standard model prediction, while the observed limit is 66 (75) times the standard model prediction with Sarkis (Chavarria) quenching factors.[graphic not available: see fulltext]

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Jupiter missions as probes of dark matter

Jupiter, the fascinating largest planet in the solar system, has been visited by nine spacecraft, which have collected a significant amount of data about Jovian properties. In this paper, we show that one type of the in situ measurements on the relativistic electron fluxes could be used to probe dark matter (DM) and dark mediator between the dark sector and our visible world. Jupiter, with its immense weight and cool core, could be an ideal capturer for DM with masses around the GeV scale. The captured DM particles could annihilate into long-lived dark mediators such as dark photons, which subsequently decay into electrons and positrons outside Jupiter. The charged particles, trapped by the Jovian magnetic field, have been measured in Jupiter missions such as the Galileo probe and the Juno orbiter. We use the data available to set upper bounds on the cross section of DM scattering off nucleons, σ χn , for dark mediators with lifetime of order $O$ (0.1–1) s. The results show that data from Jupiter missions already probe regions in the parameter space un- or under-explored by existing DM searches, e.g., constrain σχn of order (10 –41 –10 –39 ) cm 2 for 1 GeV DM dominantly annihilating into e + e – through dark mediators. This study serves as an example and an initial step to explore the full physics potential of the large planetary datasets from Jupiter missions. We also outline several other potential directions related to secondary products of electrons, positron signals and solar axions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a resonance decaying into a scalar particle and a Higgs boson in the final state with two bottom quarks and two photons in proton–proton collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for the resonant production of a heavy scalar X decaying into a Higgs boson and a new lighter scalar S, through the process X → S(→ $b\overline{b}$)H(→γγ), where the two photons are consistent with the Higgs boson decay, is performed. The search is conducted using an integrated luminosity of 140 fb -1 of proton-proton collision data at a centre-of-mass energy of 13 TeV recorded with the ATLAS detector at the Large Hadron Collider. The search is performed over the mass range 170 ≤ m X ≤ 1000 GeV and 15 ≤ m S ≤ 500 GeV. Parameterised neural networks are used to enhance the signal purity and to achieve continuous sensitivity in a domain of the (m X , m S ) plane. No significant excess above the expected background is found and 95% CL upper limits are set on the cross section times branching ratio, ranging from 39 fb to 0.09 fb. The largest deviation from the background-only expectation occurs for (m X , m S ) = (575, 200) GeV with a local (global) significance of 3.5 (2.0) standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Benchmarking Cylindrical Blast Wave Theory Against the OSIRIS-REx Sample Return Capsule Reentry

Weak shock theory based on cylindrical blast waves has been used to interpret meteor infrasound, but it has not been systematically benchmarked against a non-ablating hypersonic source with independently known parameters. The objective of this study is not to propose a new theoretical framework, but to evaluate the operational validity of the existing suite of blast radius formulations against a high-fidelity ground truth dataset. The OSIRIS-REx Sample Return Capsule reentry on 24 September 2023 provides such a benchmark because the capsule geometry, trajectory, and infrasound emission points are constrained from mission data and ray tracing, reducing source-side uncertainty associated with ablation. Using observations from 39 infrasound stations, this benchmarking study evaluates six published blast radius (${R}_{0}$ ) formulations and three weak-shock transition coefficients ( C ) within a stratified atmospheric propagation model to predict signal period and peak overpressure. The benchmarking identifies the Sakurai formulation as the best-performing formulation for non-ablating bodies, with the Jones/Plooster formulation performing comparably when a physically appropriate C is adopted. Sakurai and Jones/Plooster yield linear-period median absolute percentage residuals of 9% and 11%, respectively. The period predictions show only weak sensitivity to C at these propagation distances. The Mach-diameter approximation commonly used in meteor studies overestimates ${R}_{0}$ by more than a factor of 3 in the absence of ablation. Finally, these results establish a performance baseline for applying cylindrical blast wave theory to effectively non-ablating hypersonic bodies and demonstrate that the signal period is a robust observable for constraining ${R}_{0}$.

atmospheric entry↗

Effect of Rotary Evaporator Water Bath Temperature on Recovery Rate of Phthalate Esters

To clarify the influence of water bath temperature on the decompression and concentration efficiency of a rotary evaporator, accurate control of the water bath temperature is required. Therefore, the water bath temperature control system of a rotary evaporator was studied using the recovery rate of phthalate esters (PAEs) as the indicator. The results showed that when the temperature of the rotary evaporator was set at 40°C, the actual temperature range of the concentrated liquid would change from 26–41 to 39–41°C. By modifying the water bath temperature control system, the recovery rate of PAEs could be increased from 72.4% to 85.6% to 93.2%–98.5%. This test indicates that temperature has a great influence on vacuum concentration, and the recovery rate of PAEs can be improved by modifying the water bath temperature control system used in the rotary evaporator.

54 ENVIRONMENTAL SCIENCES↗

Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel

In this study, the joining of 6061-T6 aluminum alloy and DP590 steel using a M42 steel rivet via friction riveting technique is investigated. The surface morphology and microstructure characterization reveal the formation of an anchor zone that imparts mechanical interlock as well as the formation of metallurgical bonds at the interface of aluminum and steel. A combination of interlocking and bonding results in the achievement of a high load-carrying capacity of 5.7 kN during lap shear testing at room temperature. A finite element-based computational model was developed which accurately predicted the lap shear response of the joint. The model revealed that the metallurgical bond formed during fric-riveting adds 39% peak load strength to the joint. An extensive microstructural investigation, post-lap-shear fractography, and the modeling results, together provided insights on the joint failure mechanism. In conclusion, this study highlights that friction riveting is a promising method for aluminum-to-steel dissimilar joining, which is important for lighweighing automotive vehicles for energy efficiency.

36 MATERIALS SCIENCE↗

Explosion-induced ignition and combustion of acetylene clouds

We investigate the explosion-induced ignition and combustion of an acetylene cloud in a rectangular chamber (10 cm × 10 cm × 39 cm). In the experiments, a 0.2-g PETN charge was located at $x = 9.7\,\hbox {cm}$ and a soap bubble (d=5cm) filled with pure acetylene was located at $x = 27\,\hbox {cm}$ as measured relative to the end wall. Detonation of the charge created a blast wave that crushed the soap bubble—inducing mixing with the air. After 0.55 ms, the mixture ignited, forming at turbulent combustion cloud. The flow was modeled using the compressible Navier–Stokes equations assuming unity Lewis number. Arrhenius-based kinetics were used to model ignition. Adaptive mesh refinement was used to capture turbulent mixing on the grid (the MILES approach of J. Boris). Computed pressures were found to be in agreement with measured pressure histories. Finite-rate kinetics were required to capture the ignition processes over the duration of the experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗