Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vehicle data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Supersonic Crossflow Transition Control in Ground and Flight Tests

This paper describes the use of distributed-roughness-element (DRE) patterns along a Mach 2 design swept-wing leading edge to increase the laminar flow extent and thereby reduce drag. One swept-wing model was tested in a supersonic wind tunnel as well as beneath a supersonic flight vehicle. Wing model surface data acquired during these tests included pressures, temperatures, and boundary-layer transition locations. Similarities and differences in experimental results are discussed. While wind tunnel and flight results show some differences, the wind tunnel results still provide key insights necessary for understanding how to design effective DRE patterns for use in flight applications. Experimental results demonstrate a DRE flow control effect observed in flight similar to that observed in the wind tunnel. Finally, a different perspective is discussed concerning what flow control role RE patterns might perform in any future swept-wing laminar flow control applications.

Owens, Lewis R.↗
NASA NTRSDate not supplied

Mars InSight Entry, Descent, and Landing Trajectory and Atmosphere Reconstruction

The InSight mission landed on the surface of Mars on November 26th, 2018. The InSight system performance met all design requirements, although several performance metrics fell near the boundaries of the predictions. The peak deceleration was high, the overall timeline was short, and the landing site was uprange and crossrange from the target. This paper describes the reconstruction of the entry, descent, and landing trajectory and atmosphere. The approach utilizes a Kalman filter to blend sensor data to obtain the vehicle trajectory. The aerodynamic database is used in combination with the sensed accelerations to obtain estimates of the atmosphere-relative state, which in turn is used to derive the free-stream atmospheric conditions during entry, until the time of parachute deployment. The results indicate that the reconstructed atmosphere was approximately 1σbelow the preflight atmosphere. Analysis of the reconstructed vehicle attitude angles indicate that the aerodynamic lift was oriented downward at entry. The vehicle developed a roll rate during entry, which directed a component of the lift to the north. The low density and aerodynamic lift direction are determined to be the primary causes of the high deceleration, short timeline, and location of the landing site relative to the target.

Christopher D Karlgaard↗
NASA NTRS2020

Mars InSight Entry, Descent, and Landing Trajectory and Atmosphere Reconstruction

The InSight mission landed on the surface of Mars on November 26th, 2018. The InSight system performance met all design requirements, although several performance metrics fell near the boundaries of the predictions. The peak deceleration was high, the overall timeline was short, and the landing site was uprange and crossrange from the target. This paper describes the reconstruction of the entry, descent, and landing trajectory and atmosphere. The approach utilizes a Kalman filter to blend sensor data to obtain the vehicle trajectory. The aerodynamic database is used in combination with the sensed accelerations to obtain estimates of the atmosphere-relative state, which in turn is used to derive the free-stream atmospheric conditions during entry, until the time of parachute deployment. The results indicate that the reconstructed atmosphere was approximately 1σbelow the preflight atmosphere. Analysis of the reconstructed vehicle attitude angles indicate that the aerodynamic lift was oriented downward at entry. The vehicle developed a roll rate during entry, which directed a component of the lift to the north. The low density and aerodynamic lift direction are determined to be the primary causes of the high deceleration, short timeline, and location of the landing site relative to the target.

Christopher D Karlgaard↗
NASA NTRS2020

TCL4 Corpus Christi Video with Narration

This is a video for use in presenting an overview of NASA's UAS Traffic Management (UTM) Project's Technical Capability Level 4 (TCL4) flight test that was conducted in the summer of 2019 in the urban flight areas of Corpus Christi, TX. The video presents a graphical view of the specific flight areas that were used and touches upon the main objectives that were demonstrated as part of the event. A number of examples with visual representations of Unmanned Aircraft Vehicles based on collected data are presented in various situations that were constructed to target certain concept elements of UTM. Examples of situations presented are: High density operations, operations in close proximity, off-nominal events, and contingency management situations.

UAS Traffic Management↗
NASA NTRSDate not supplied

In-Situ Surface Construction of Infrastructure

In situ resources offer an opportunity to reduce the amount of items brought from Earth when exploring moons and planets. Utilizing those resources requires energy that comes with a cost. In the case of human missions to Mars, trading surface power for launch mass is beneficial for propellant and consumables required to sustain human pioneering and settlement on the planet’s surface. However, In Situ Resource Utilization (ISRU) can mean far more than propellant production and consumables replacement for missions beyond Low Earth Orbit. NASA’s Systems Capability Leader-ship Team (SCLT) for ISRU created a work break-down structure based on functions identified in roadmaps pertaining to human exploration. That WBS includes Prospecting, Extraction, Processing, Construction, Manufacturing, and Energy. Over the years, NASA has developed some capabilities and technologies for prospecting, extraction, and processing carbon dioxide and water on Mars into propellants and life support consumables. However, that is a small subset of the ISRU needs that are coming to light with NASA’s push to return to the Moon for extended periods of time. For instance, astronauts require shielding from Ga-lactic Cosmic Rays and nuclear radiation and protection from the low temperatures and pressures in Space. Surface assets including crew, landers, and ascent modules can be damaged by surface ejecta during landing and launch operations on the Moon and Mars. Creating shielding, berms, and pads requires movement of large volumes and stabilization of regolith in the context of a civil engineering construction project. Because of the multi-disciplinary nature of the aerospace systems needed for human exploration, SCLT on ISRU created an ISRU Construction Integrated Steering Group that combines expertise among several NASA Principal Technologists and Capabilities Leaders for exploring options, assessing opportunities, and developing requirements for construction and manufacturing on the Moon and Mars NASA’s new program to develop Lunar landers for small, mid, and large payload deliveries to the Lunar surface leading to human missions by 2025 spawned an investigation into plume surface interactions caused by the lander during descent and ascent. The trade space to resolve this issue includes regolith stabilization via landing pad construction techniques and lander nozzles characteristics due to vehicle systems design. Some data exists from the Apollo missions but more is required for the missions ahead. The purpose of this paper [1] is to outline an approach for developing requirements that can guide systems designs while taking advantage of flight opportunities in NASA’s plans to return to the Moon.

In-Situ↗
NASA NTRS2022

Perseverance Rover’s Robotic Arm and Turret Mounted Instruments’ Surface Commissioning

The Robotic Arm (RA) on the Perseverance rover is an integral component of the Sampling and Caching System necessary for completing the science goals of the Mars 2020 mission. While the Perseverance rover was based on the Curiosity rover which landed in 2012, the Robotic Arm was redesigned to carry a much larger turret with a new suite of payloads. Shortly after Perseverance landed in Jezero Crater, a series of checkouts was completed with the RA during the first 100 sols of the mission in order to ensure proper functionality of the RA and the instruments mounted on the turret. This period of time in the mission was called Surface Operations Transition (SOX). The objective of SOX was to systematically execute checkout activities for all the basic functionality so that the RA and instruments, as well as other rover components, could be released for scientific exploration.RA activities during SOX can be divided into a few different categories: Mechanism Checkouts, Rover Visual Inspections, Performance Characterization, and Instrument Functional Checkouts. Many of these checkouts built off of each other such that each subsequent activity would verify incrementally complex functionality. Many of the defined activities were executed several times throughout the development of the rover and served as a check that the RA’s performance is consistent with testing on Earth. Other activities were developed uniquely for SOX to respond to challenges discovered during development. They were designed to be verifiable without the help of ground support equipment or previous executions on the flight hardware to compare against.This paper discusses the formulation and conception of the various RA SOX checkout activities, verification and testing required to certify them for flight, execution of the activities on Mars, issues encountered, and finally results and findings as the mission transitioned to nominal science operations. We will be presenting the results and analysis using downlinked imaging and data from the flight vehicle to show how we verified the performance of the Robotic Arm and the turret mounted instruments in order to transition to science operations with a clean bill of health.

Edgett, Kenneth↗
NASA NTRSDate not supplied

NAS Exploratory Concepts & Technologies (NExCT) Upper Class E Traffic Management (ETM) Collaborative Evaluation #1 (CE-1)

NASA, in partnership with AeroVironment and Aerostar, recently demonstrated a first-of-its-kind air traffic management concept that could pave the way for aircraft to safely operate at higher altitudes. This work seeks to open the door for increased internet coverage, improved disaster response, expanded scientific missions, and even supersonic flight. The concept is referred to as an Upper-Class E traffic management, or ETM. NASA and its partners have developed an ETM traffic management system that allows aircraft to autonomously share location and flight plans, enabling aircraft to stay safely separated. This concept was demonstrated during the recent traffic management simulation in the Airspace Operations Laboratory at Ames, data from multiple air vehicles was displayed across dozens of traffic control monitors and shared with partner computers off site. The study details and the initial results are presented at a regular, informal ETM industry meetings held virtually.

Upper Class E Traffic Management (ETM)↗
NASA NTRS1986

A comparison of computed and measured aerodynamic characteristics of a proposed aeroassist flight experiment configuration

The use of experimental or computed data to evaluate the performance of aeroassist orbital transfer vehicles (AOTVs) is discussed. Aerodynamic and surface pressure data are derived from computed flowfield solutions (the HALIS inviscid flowfield code), the Newtonian theory, and ground-based, wind tunnel studies (hypersonic He tunnel, 31-inch Mach 10 tunnel, and a hypersonic CF4 tunnel). The wind tunnel and HALIS models were tested at angles-of-attack that ranged from -10 to 10 deg. The effects of the ellipticity of the nose, the radius of the circular arc, and the angle through which the arc passes on the aerodynamic characteristics of the vehicles are examined. It is observed that the HALIS and CF4 tunnel generated surface pressure on the AOTVs produced the most useful aerodynamic data. Good correlation is obtained for the experimental and computational data; however, the Newtonian results do not correspond to the tunnel/HALIS data.

Weilmuenster, K. J.↗
NASA NTRS1977

Space and planetary environment criteria guidelines for use in space vehicle development 1977 revision

Space and planetary natural environment data were presented for use as design criteria guidelines in space vehicle development programs. Specifically, information is provided in the disciplinary areas of atmospheric and ionospheric properties, radiation, solar cycle predictions, geomagnetic field, astrodynamic constants, and meteoroids for the Earth's atmosphere above 90 km, interplanetary space, and the atmospheres and surfaces (when available) of the moon and the planets (other than earth) of the solar system. The current upper atmosphere model and solar cycle prediction routines were described in detail.

West, G. S., Jr.↗
NASA NTRS1993

Test and evaluation of pressure transducers for a reentry vehicle pressure measurement system

The Pressure Distribution and Air Data System experiment was designed to obtain accurate pressure measurements on the windward surface of an aeroassist flight research vehicle during its aeropass through the earth's atmosphere. These pressure measurements were intended to provide air data and support CFD code validation for future aeroassist orbital transfer vehicle designs. The system consisted of a flush orifice configuration connected by tubing to a specially ranged and selected pressure transducer. The purpose of this paper is to describe the flight acceptance test program and test results leading to the selection of flight transducers.

Gibson, Lorelei S.↗
DOE OSTI2020

Online Parameter Estimation Methods for Adaptive Cruise Control Systems

Modeling Adaptive Cruise Control (ACC) vehicles enables the understanding of the impact of these vehicles on traffic flow. In this work, two online methods are used to provide real time system identification of ACC enabled vehicles. The first technique is a recursive least squares (RLS) approach, while the second method solves a nonlinear joint state and parameter estimation problem via particle filtering (PF). We provide a parameter identifiability analysis for both methods to analytically show that the model parameters are not identifiable using equilibrium driving. The accuracy and computational runtime of the online methods are compared to a commonly used offline simulation-based optimization (i.e., batch optimization) approach. The methods are tested on synthetic data as well as on empirical data collected directly from a 2019 model year ACC vehicle using data from sensors that are part of the stock ACC system. The online methods are scalable and provide comparable accuracy to the batch method. RLS runs in real time and is two orders of magnitude faster than the batch method for modest sized (e.g., 15 min) datasets. The particle filter also runs in real- time, and is also suitable in streaming applications in which the datasets can grow arbitrarily large.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2001

Adaptive mass expulsion attitude control system

An attitude control system and method operative with a thruster controls the attitude of a vehicle carrying the thruster, wherein the thruster has a valve enabling the formation of pulses of expelled gas from a source of compressed gas. Data of the attitude of the vehicle is gathered, wherein the vehicle is located within a force field tending to orient the vehicle in a first attitude different from a desired attitude. The attitude data is evaluated to determine a pattern of values of attitude of the vehicle in response to the gas pulses of the thruster and in response to the force field. The system and the method maintain the attitude within a predetermined band of values of attitude which includes the desired attitude. Computation circuitry establishes an optimal duration of each of the gas pulses based on the pattern of values of attitude, the optimal duration providing for a minimal number of opening and closure operations of the valve. The thruster is operated to provide gas pulses having the optimal duration.

Rodden, John J.↗
NASA NTRS2013

Data Mining for Anomaly Detection

The Vehicle Integrated Prognostics Reasoner (VIPR) program describes methods for enhanced diagnostics as well as a prognostic extension to current state of art Aircraft Diagnostic and Maintenance System (ADMS). VIPR introduced a new anomaly detection function for discovering previously undetected and undocumented situations, where there are clear deviations from nominal behavior. Once a baseline (nominal model of operations) is established, the detection and analysis is split between on-aircraft outlier generation and off-aircraft expert analysis to characterize and classify events that may not have been anticipated by individual system providers. Offline expert analysis is supported by data curation and data mining algorithms that can be applied in the contexts of supervised learning methods and unsupervised learning. In this report, we discuss efficient methods to implement the Kolmogorov complexity measure using compression algorithms, and run a systematic empirical analysis to determine the best compression measure. Our experiments established that the combination of the DZIP compression algorithm and CiDM distance measure provides the best results for capturing relevant properties of time series data encountered in aircraft operations. This combination was used as the basis for developing an unsupervised learning algorithm to define "nominal" flight segments using historical flight segments.

Biswas, Gautam↗
DOE OSTI2026

EV Watts Public Database

With the rapid increase in vehicle electrification, there is a need for up-to-date, publicly available national data to understand end user charging and driving patterns, as well as vehicle and infrastructure performance, to inform research planning. Energetics worked with various partners to collect and analyze plug-in electric vehicle (PEV) and electric vehicle supply equipment (EVSE) data from 2019 to 2022. All sensitive attributes have been removed from this publicly available dataset. Researchers from one of the partner national labs under non-disclosure agreement (NDA) can request access to additional attributes by reaching out to evwattsdata@energetics.com.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1976

Results of investigations conducted in the LaRC 8-foot transonic pressure tunnel using the 0.010-scale 72-OTS model of the space shuttle integrated vehicle (IA93), volume 2

Test procedures, history, and plotted coefficient data are presented for an aero-loads investigation on the updated configuration-5 space shuttle launch vehicle at Mach numbers from 0.600 to 1.205. Six-component vehicle forces and moments, base and sting-cavity pressures, elevon hinge moments, wing-root bending and torsion moments, and normal shear force data were obtained. Full simulation of updated vehicle protuberances and attach hardware was employed.

Nichols, M. E.↗