Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “urbanization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Statistical Treatment of Convolutional Neural Network Superresolution of Inland Surface Wind for Subgrid-Scale Variability Quantification

Abstract Machine learning models have been employed to perform either physics-free data-driven or hybrid dynamical downscaling of climate data. Most of these implementations operate over relatively small downscaling factors because of the challenge of recovering fine-scale information from coarse data. This limits their compatibility with many global climate model outputs, often available between ∼50- and 100-km resolution, to scales of interest such as cloud resolving or urban scales. This study systematically examines the capability of a type of superresolving convolutional neural network (SR-CNNs) to downscale surface wind speed data over land from different coarse resolutions (25-, 48-, and 100-km resolution) to 3 km. For each downscaling factor, we consider three convolutional neural network (CNN) configurations that generate superresolved predictions of fine-scale wind speed, which take between one and three input fields: coarse wind speed, fine-scale topography, and diurnal cycle. In addition to fine-scale wind speeds, probability density function parameters are generated through which sample wind speeds can be generated, accounting for the intrinsic stochasticity of wind speed. For assessing generalization to new data, CNN models are tested on regions with different topography and climate that are unseen during training. The evaluation of superresolved predictions focuses on subgrid-scale variability and the recovery of extremes. Models with coarse wind and fine topography as inputs exhibit the best performance when compared with other model configurations, operating across the same downscaling factor. Our diurnal cycle encoding results in lower out-of-sample generalizability when compared with other input configurations.

17 WIND ENERGY↗
DOE OSTI2021

Coupled Air Quality and Boundary-Layer Meteorology in Western U.S. Basins during Winter: Design and Rationale for a Comprehensive Study

The wintertime episodes of high aerosol concentrations occur frequently in urban and agricultural basins and valleys worldwide. These episodes often arise following development of persistent cold-air pools (PCAPs) that limit mixing and modify chemistry. While field campaigns targeting either basin meteorology or wintertime pollution chemistry have been conducted, coupling between interconnected chemical and meteorological processes remains an insufficiently studied research area. Gaps in understanding the coupled chemical–meteorological interactions that drive high-pollution events make identification of the most effective air-basin specific emission control strategies challenging. To address this, a September 2019 workshop occurred with the goal of planning a future research campaign to investigate air quality in western U.S. basins. Approximately 120 people participated, representing 50 institutions and five countries. Workshop participants outlined the rationale and design for a comprehensive wintertime study that would couple atmospheric chemistry and boundary layer and complex-terrain meteorology within western U.S. basins. Participants concluded the study should focus on two regions with contrasting aerosol chemistry: three populated valleys within Utah (Salt Lake, Utah, and Cache Valleys) and the San Joaquin Valley in California. This paper describes the scientific rationale for a campaign that will acquire chemical and meteorological datasets using airborne platforms with extensive range, coupled to surface-based measurements focusing on sampling within the near-surface boundary layer, and transport and mixing processes within this layer, with high vertical resolution at a number of representative sites. No prior wintertime basin-focused campaign has provided the breadth of observations necessary to characterize the meteorological–chemical linkages outlined here, nor to validate complex processes within coupled atmosphere–chemistry models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Satellite-Based Ranking of the World’s Hottest and Coldest Cities Reveals Inequitable Distribution of Temperature Extremes

The identification of the world’s hottest and coldest cities fascinates both the public and the scientific community. However, the ranking of city temperatures, especially from the perspective of human discomfort, has been difficult. Here we estimated the monthly mean maximum and minimum 1-km resolution urban temperatures of 13,135 cities worldwide (2003–19) from the thermal discomfort perspective by combining in situ measurements, satellite-based land surface temperatures, fine-resolution intracity data, and reanalysis data. Manama, Bahrain, was identified as the hottest city (48.18° ± 1.31°C) and Yakutsk, Russia (–42.96° ± 0.72°C), as the coldest city. The global city temperatures followed a power-law pattern, characterized by cities with <0.3 million inhabitants covering 80% of the top 20% global cities with extreme temperatures. Our study reveals an inequitable pattern of global city temperature extremes and highlights the urgency of developing appropriate strategies to reduce climate change risks in small- and medium-sized cities with low development levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The UCAR Africa Initiative: Recent insights, challenges, and opportunities to foster collaborative research for environmental sustainability

Africa is increasingly being exposed to the negative impacts of climate and environmental change, while having less capacity to respond compared to other continents. The vulnerability partially results from unprecedented demographic growth, urbanization, and industrialization. However, the continent has still largely been underserved by the broader Earth System Science (ESS) community, as evidenced by the limited amount of ESS data and research that cover Africa compared to other areas of the world. Here we present the recent University Corporation for Atmospheric Research (UCAR) Africa Initiative that aims to enhance environmental sustainability in Africa by fostering international collaborative research partnerships co-led by African scientists. Specifically, we outline urgent challenges and opportunities identified through an international workshop in six areas of ESS namely (1) air quality and health, (2) weather, (3) climate, (4) land and water, (5) social science perspectives, and (6) developing equitable collaboration and sustainable infrastructure. We highlight examples of successful partnerships and conclude with recommendations to advance collaborative, actionable ESS research that addresses Africa’s critical environmental challenges.

African weather and land variability↗
DOE OSTI2025

Summer Aerosol and Trace Gas Observations in Houston, Texas Using an Adaptable Mobile Facility

An aerosol container featuring a shared inlet system was deployed to Houston, Texas in July 2022, enabling direct, high-time-resolution in situ measurements of aerosols and trace gases. The internal rack system and floorplan was designed for adaptable modularity to elucidate aerosol physicochemical processes at fine scales. The design allowed for the deployment of a core instrument suite and additional customized research grade instruments. A heterogeneous mixture of aerosols was observed during three regimes: (1) intermittent black carbon (BC) and diurnal variations in aerosol chemical composition, (2) observed particle growth associated with SO 2 , (3) transported supermicron dust. The high variability of observed particles and gases in high time resolution indicated a complex urban area with multiple local and regional sources and processes. Particle growth rates of 7–16 nm/hr were observed for submicron particles during periods when SO 2 was >0.5 ppbv. Two periods of multi-day long-range transport events of dust from the African Sahara were observed in the supermicron and submicron particle modes with total mass concentrations up to 30 μg m −3 . Aerosol scattering angstrom exponents and extinction coefficients (B ext ) increased with humidity as a function of particle composition. The measurements demonstrate collaborative capabilities that can be used to increase observations of aerosol processing, microphysical and optical properties, internal mixing state, and supermicron aerosol that are not parameterized or missing in global Earth energy system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Novel and Practical Method to Quantify the Quality of Mobility: The Mobility Energy Productivity Metric: Preprint

Recent technology innovations are enabling fundamental improvements in mobility systems, including options for new travel modes, methods, and opportunities to connect people with goods, services, and employment. A desire to quantify and compare both existing and emerging transportation options motivated development of the mobility energy productivity (MEP) metric described herein. The MEP metric fundamentally measures the potential of a city's transportation system to connect a person to a variety of services and activities that define a high-quality of life, relative to the convenience, cost and energy needed to provide these connections. Fundamentally derived from accessibility theory, the MEP advances practice by using readily available travel time data (either from web-based application programming interfaces (APIs) or outputs from an urban transportation model) combined with established parameters that reflect the energy intensity and cost of various travel modes, and relative frequency of activity engagement. The construction of the MEP metric allows for aggregation and disaggregation to the appropriate spatial, modal, and trip purpose resolution, as analysis needs dictate. The MEP could be used to compare alternative futures related to technology, infrastructure investment, or policy, providing a much-needed tool for planners, researchers, and analysts.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Long-Term Vehicle Speed Prediction via Historical Traffic Data Analysis for Improved Energy Efficiency of Connected Electric Vehicles

Connected and automated vehicles (CAVs) are expected to provide enhanced safety, mobility, and energy efficiency. While abundant evidence has been accumulated showing substantial energy saving potentials of CAVs through eco-driving, traffic condition prediction has remained to be the main challenge in capitalizing the gains. The coupled power and thermal subsystems of CAVs necessitate the use of different speed preview windows for effective and integrated power and thermal management. Real-time vehicle-to-infrastructure (V2I) communications can provide an accurate speed prediction over a short prediction horizon (e.g., 30 s to 60 s), but not for a long range (e.g., over 180 s). Therefore, advanced approaches are required to develop detailed speed prediction for robust optimization-based energy management of CAVs. This paper presents an integrated speed prediction framework based on historical traffic data classification and real-time V2I communications for efficient energy management of electrified CAVs. The proposed framework provides multi-range speed predictions with different fidelity over short and long horizons. The proposed multi-range speed prediction is integrated with an economic model predictive control (MPC) strategy for the battery thermal management (BTM) of connected and automated electric vehicles (EVs). The simulation results over real-world urban driving cycles confirm the enhanced prediction performance of the proposed data classification strategy over a long prediction horizon. Despite the uncertainty in long-range CAVs’ speed predictions, the vehicle-level simulation results show that 14% and 19% energy savings can be accumulated sequentially through eco-driving and BTM optimization (eco-cooling), respectively, when compared with normal driving (i.e., human driver) and conventional BTM strategy.

Engineering↗
DOE OSTI2020

Use of Shared Automated Vehicles for First-Mile Last-Mile Service: Micro-Simulation of Rail-Transit Connections in Austin, Texas

Shared fleets of fully automated vehicles (SAVs) coupled with real-time ride-sharing to and from transit stations are of interest to cities and nations in delivering more sustainable transportation systems. By providing first-mile last-mile (FMLM) connections to key transit stations, SAVs can replace walk-to-transit, drive-to-transit, and drive-only trips. Using the SUMO (Simulation of Urban MObility) toolkit, this paper examines mode splits, wait times, and other system features by micro-simulating two fleets of SAVs providing an FMLM ride-sharing service to 10% of central Austin’s trip-makers near five light-rail transit stations. These trips either start or end within two geofenced areas (called automated mobility districts [AMDs]), and travel time and wait time feedbacks affect mode choices. With rail service headways of 15?min, and 15 SAVs serving FMLM connections to and from each AMD, simulations predict that 3.7% of the person-trip-making will shift from driving alone to transit use in a 3?mi?×?6?mi central Austin area. During a 3-h morning peak, 30 SAVs serve about 10 person-trips each (to or from the stations), with 3.4?min average wait time for SAVs, and an average vehicle occupancy of 0.74 persons (per SAV mile-traveled), as a result of empty SAV driving between riders. Sensitivity analysis of transit headways (from 5 to 20?min) and fleet sizes (from 5 to 20 vehicles in each AMD) shows an increase in FMLM mode share with more frequent transit service and larger fleet size, but total travel time served as the biggest determinant in trip-makers’ mode share.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Explorative Visualization for Traffic Safety using Adaptive Study Areas

The pressing need to improve traffic safety has become a societal concern in many cities around the world. Many traffic accidents are not occurring as stand-alone events but as consequences of other road incidents and hazards. To capture the traffic safety indications from a holistic aspect, this paper presents a suite of visualization techniques to explore large traffic safety datasets collected from different sources using adaptive study areas which include the whole region (Hamilton County, Ohio, U.S.) as well as smaller sub-areas. In the present study, these data source include (1) Hamilton County’s 911 emergency response data, which includes traffic incidents as well as other types of incidents throughout the county, and (2) Tennessee crash data, which contains only vehicle crashes with more detail on the circumstances of each crash. We find that both abstract and spatial visualization techniques are used to derive a better understanding of traffic safety patterns for different traffic participants in various urban environments. In addition to the entire region of Hamilton County, safety is examined on the highways, in the downtown area, and in a shopping district east of the city center. It is possible to characterize incidents in the different areas, gain a better understanding of common incident patterns, and identify outliers in the data. Finally, a textured tile calendar is presented to compare spatiotemporal patterns.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Household Transportation Energy Affordability by Region and Socioeconomic Factors

Transportation fuel is an important component of household budgets, as 3.3% of total household expenditures are for vehicle fuel nationwide and over 50% of annual household expenditures on energy are for transportation. These average values vary geographically, and higher energy cost burdens are faced by households with lower incomes. Defining transportation energy affordability burden as the percentage of annual household income spent on vehicle fuel, this study aims to quantify affordability as a function of household characteristics and geography. Here, through analysis at the census tract level, this study (i) projects annual household vehicle miles traveled (VMT) based on demographic factors using machine-learning techniques, (ii) estimates local differences in vehicle fuel economy and fuel price, and (iii) quantifies resulting transportation energy affordability by census tract. This study found that the average burden by tract varies from 0.15% to 8%. The variation in affordability can be largely explained by income level and vehicle fuel efficiency. Suburban and rural households spend more on transportation energy compared with urban households because of the usage of less fuel-efficient vehicle technologies and higher annual VMT. Lower-income groups have a wide distribution of the percentage of income spent on transportation energy, 1.2% to 8%, whereas the range for the highest income group ($125,000+) is from 0.15% to 3.9%. This detailed transportation energy affordability analysis provides a better understanding of regional variations in household travel behavior, helps to determine where fuel-efficient vehicle technologies are more likely to be used, and improves estimates of vehicle ownership costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Revenue-Maximizing Shared Parking and Electric Vehicle Charging Management in Multi-Unit Dwellings

In urban areas, searching for parking and electric vehicle (EV) charging can result in cruising, congestion, and environmental externalities. Recognizing the business opportunity of offering private parking and charging infrastructure access within multi-unit dwellings (MUDs) during daytime, we model a shared parking and EV charging management system. We maximize the revenue of MUD charging hubs in mixed land use, catering to public demand. Our approach accounts for the objectives of the two stakeholders involved: a demand model is fitted on the choices of EV charging users, and the supply model optimizes the allocation of parking and charging requests in an MUD parking lot. A binary integer linear programming model for the allocation of parking and charging spaces with a rolling horizon is integrated with matching rules that handle both parking and charging requests. In our numerical experiments in a neighborhood of Chicago, Illinois, we estimate the performance of the MUD parking and charging system with metrics that include revenue, number of matchings, and utilization rates. At any given time, MUDs with lower prices attract more charging requests, particularly those of longer duration, resulting in higher revenue and greater charging utilization. Dynamic pricing facilitates a more equitable distribution of requests; as MUD parking lots reach capacity and their fees increase, other MUDs become more competitive, attracting additional requests. Comparing our method against first-come-first-served and optimal-solution benchmarks, we demonstrate our model’s effectiveness in dynamically managing mixed parking and charging demand in MUD charging hubs.

electric vehicle, multi-unit dwelling, charging in↗
DOE OSTI2025

The examination of the spatial and contextual disparities of determinant factors of adult obesity among communities in Chicago

The issue of adult obesity has multiple complexes contributing factors and is becoming a significant public health concern worldwide, including in the neighborhoods of Chicago. This study utilized data on nineteen demographic, environmental, socioeconomic, and behavioral characteristics of community neighborhoods in Chicago to analyze the interplay and impact of these complex factors, which is essential for understanding and addressing the issue. The analysis revealed significant geographic variations in the prevalence of adult obesity across Chicago neighborhoods, with associations of these patterns found significant in 17 out of 19 determinant factors studied. Notably, strong associations were found between obesity and the percentage of the White population, the quality of sidewalks and walkability, the economic hardship index, and the unemployment rate. Identifying high-risk adult obesity communities and understanding the multifaceted contributing factors is crucial for developing evidence-based interventions and policy initiatives to reduce obesity and create healthier, more equitable urban neighborhoods for a city such as Chicago and beyond.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Updated distribution maps of predominant Culex mosquitoes across the Americas

Abstract Background Estimates of the geographical distribution of Culex mosquitoes in the Americas have been limited to state and provincial levels in the United States and Canada and based on data from the 1980s. Since these estimates were made, there have been many more documented observations of mosquitoes and new methods have been developed for species distribution modeling. Moreover, mosquito distributions are affected by environmental conditions, which have changed since the 1980s. This calls for updated estimates of these distributions to understand the risk of emerging and re-emerging mosquito-borne diseases. Methods We used contemporary mosquito data, environmental drivers, and a machine learning ecological niche model to create updated estimates of the geographical range of seven predominant Culex species across North America and South America: Culex erraticus , Culex nigripalpus , Culex pipiens , Culex quinquefasciatus , Culex restuans , Culex salinarius , and Culex tarsalis . Results We found that Culex mosquito species differ in their geographical range. Each Culex species is sensitive to both natural and human-influenced environmental factors, especially climate and land cover type. Some prefer urban environments instead of rural ones, and some are limited to tropical or humid areas. Many are found throughout the Central Plains of the USA. Conclusions Our updated contemporary Culex distribution maps may be used to assess mosquito-borne disease risk. It is critical to understand the current geographical distributions of these important disease vectors and the key environmental predictors structuring their distributions not only to assess current risk, but also to understand how they will respond to climate change. Since the environmental predictors structuring the geographical distribution of mosquito species varied, we hypothesize that each species may have a different response to climate change. Graphical abstract

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Carbon Nanotube and Graphene Oxide Reinforced Composites for Lightning Strike Protection of Composite Structures

Carbon fiber reinforced plastics (CFRP) composites have become the primary materials in the aerospace industry. Future transportation means, such as urban air mobility (UAM), will be employing CFRP structures. However, lightning strike damage on composite structures is a serious concern. CFRP composites possess low through-thickness electrical conductivity (≈ 1 S/m), which can cause extreme resistive heat in the event of lightning strikes. Research on polymeric lightning strike protection has gained momentum in the past few years. Researchers have studied various conductive fillers to improve the CFRP performance against lightning strikes. Carbon nanotubes (CNTs) and graphene oxide (GO) have been studied as future lightning Strike Protection (LSP) materials the most. The use of CNT and GO-based composites has shown improved mechanical properties and improved electrical conductivity of the composites. Researchers investigated CNTs and GO as the fillers to the matrix system, sizing the carbon fibers and the surface coating on top of the CFRP surface. This chapter highlights the remarkable improvement in the lightning damage suppression of CNT and GO-based composites and their structural applications. Special attention is given to their potential use as LSP material in future aircraft.

Kumar, Vipin↗
DOE OSTI2020

Height Above Nearest Drainage (HAND) and Hydraulic Property Table for CONUS

The continental flood inundation mapping (CFIM) framework is a high-performance computing (HPC)-based computational framework for the Height Above Nearest Drainage (HAND)-based inundation mapping methodology. Using the 10m Digital Elevation Model (DEM) data produced by U.S. Geological Survey (USGS) 3DEP (the 3-D Elevation Program) and the NHDPlus hydrography dataset produced by USGS and the U.S. Environmental Protection Agency (EPA), a hydrological terrain raster called HAND is computed for HUC6 units in the conterminous U.S. (CONUS). The value of each raster cell in HAND is an approximation of the relative elevation between the cell and its nearest water stream. Derived from HAND, a hydraulic property table is established to calculate river geometry properties for each of the 2.7 million river reaches covered by NHDPlus (5.5 million kilometers in total length). This table is a lookup table for water depth given an input stream flow value. Such lookup is available between water depth 0m and 25m at 1-foot interval. The flood inundation map is then computed by using HAND and this lookup table based on the near real-time water forecast from the National Water Model (NWM) at the National Oceanic and Atmospheric Administration (NOAA). HAND and the Hydraulic Property Table version 0.2. is created to correspond to data updates in the USGS 1/3 arcsec DEM, the USGS National Hydrography Dataset, including its Water Boundary Dataset, and the NHDPlus medium resolution dataset. This dataset comprises 331 HUC6 units for CONUS (excluding the five great lakes units), each is a downloadable zip file. Version 0.1 was computed at the National Center for Supercomputing Applications (NCSA) at the University of Illinois at Urban-Champaign in 2016 and is currently hosted at the Texas Advanced Computing Center (TACC). Please cite this data DOI and the following publications and data DOIs when you use HAND and the hydraulic property table: Liu, Yan Y., David R. Maidment, David G. Tarboton, Xing Zheng, and Shaowen Wang. 'A CyberGIS integration and computation framework for high-resolution continental-scale flood inundation mapping.' JAWRA Journal of the American Water Resources Association 54, no. 4 (2018): 770-784. DOI: 10.1111/1752-1688.12660 Zheng, Xing, David G. Tarboton, David R. Maidment, Yan Y. Liu, and Paola Passalacqua. 'River channel geometry and rating curve estimation using height above the nearest drainage.' JAWRA Journal of the American Water Resources Association 54, no. 4 (2018): 785-806. DOI: 10.1111/1752-1688.12661 Liu, Y. (2018). Height Above Nearest Drainage (HAND) for CONUS - v0.1, HydroShare, https://doi.org/10.4211/hs.69f7d237675c4c73938481904358c789 LICENSE FOR USE -- MAPS AND DATA DISCLAIMER This resource is shared under the Creative Commons Attribution CC BY, http://creativecommons.org/licenses/by/4.0/ MAPS AND DATA DISCLAIMER The Oak Ridge National Laboratory (ORNL) shall not be held liable for improper or incorrect use of the data described or information contained on this map or associated series of maps. The data and related map graphics are not legal, land survey or engineering documents and are not intended to be used as such. ORNL gives no warranty, express or implied, as to the accuracy, reliability, utility or completeness of this information. The user of these maps and data assumes all responsibility and risk for the use of the maps and data. ORNL disclaims all warranties, representations or endorsements either express or implied, with regard to the information contained in this map product, including, but not limited to, all implied warranties of merchantability, fitness for a particular purpose or non-infringement. This preliminary map product is for research and review purposes only. It is not intended to be used for emergency management operational or life safety decisions at the local or regional governmental level or by the general public. Users requiring information regarding hazardous conditions or meteorological conditions for specific geographic areas should consult directly with their city or county emergency management office.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Height Above Nearest Drainage (HAND) and Hydraulic Property Table for CONUS - Version 0.21 (20200601)

The continental flood inundation mapping (CFIM) framework is a high-performance computing (HPC)-based computational framework for the Height Above Nearest Drainage (HAND)-based inundation mapping methodology. Using the 10m Digital Elevation Model (DEM) data produced by U.S. Geological Survey (USGS) 3DEP (the 3-D Elevation Program) and the NHDPlus hydrography dataset produced by USGS and the U.S. Environmental Protection Agency (EPA), a hydrological terrain raster called HAND is computed for HUC6 units in the conterminous U.S. (CONUS). The value of each raster cell in HAND is an approximation of the relative elevation between the cell and its nearest water stream. Derived from HAND, a hydraulic property table is established to calculate river geometry properties for each of the 2.7 million river reaches covered by NHDPlus (5.5 million kilometers in total length). This table is a lookup table for water depth given an input stream flow value. Such lookup is available between water depth 0m and 25m at 1-foot interval. The flood inundation map is then computed by using HAND and this lookup table based on the near real-time water forecast from the National Water Model (NWM) at the National Oceanic and Atmospheric Administration (NOAA). HAND and the Hydraulic Property Table version v0.21 is an upgrade to v0.2. Version 0.21 applies NHD HR etching to DEMs for all HUC6 units before running the HAND workflow. This new version also fixed the issue of void areas along HUC boundary. This dataset comprises 331 HUC6 units for CONUS (excluding the five great lakes units), each is a downloadable zip file. Version 0.1 was computed at the National Center for Supercomputing Applications (NCSA) at the University of Illinois at Urban-Champaign in 2016 and is currently hosted at the Texas Advanced Computing Center (TACC). Please cite this data DOI and the following publications and data DOIs when you use HAND and the hydraulic property table: Liu, Yan Y. Height Above Nearest Drainage (HAND) and Hydraulic Property Table for CONUS - Version 0.2. (20200301). Oak Ridge Leadership Computing Facility. (2020). DOI: 10.13139/ORNLNCCS/1608331 Liu, Yan Y., David R. Maidment, David G. Tarboton, Xing Zheng, and Shaowen Wang. 'A CyberGIS integration and computation framework for high-resolution continental-scale flood inundation mapping.' JAWRA Journal of the American Water Resources Association 54, no. 4 (2018): 770-784. DOI: 10.1111/1752-1688.12660 Zheng, Xing, David G. Tarboton, David R. Maidment, Yan Y. Liu, and Paola Passalacqua. 'River channel geometry and rating curve estimation using height above the nearest drainage.' JAWRA Journal of the American Water Resources Association 54, no. 4 (2018): 785-806. DOI: 10.1111/1752-1688.12661 Liu, Y. (2018). Height Above Nearest Drainage (HAND) for CONUS, HydroShare, https://doi.org/10.4211/hs.69f7d237675c4c73938481904358c789 LICENSE FOR USE -- MAPS AND DATA DISCLAIMER This resource is shared under the Creative Commons Attribution CC BY, http://creativecommons.org/licenses/by/4.0/ MAPS AND DATA DISCLAIMER The Oak Ridge National Laboratory (ORNL) shall not be held liable for improper or incorrect use of the data described or information contained on this map or associated series of maps. The data and related map graphics are not legal, land survey or engineering documents and are not intended to be used as such. ORNL gives no warranty, express or implied, as to the accuracy, reliability, utility or completeness of this information. The user of these maps and data assumes all responsibility and risk for the use of the maps and data. ORNL disclaims all warranties, representations or endorsements either express or implied, with regard to the information contained in this map product, including, but not limited to, all implied warranties of merchantability, fitness for a particular purpose or non-infringement. This preliminary map product is for research and review purposes only. It is not intended to be used for emergency management operational or life safety decisions at the local or regional governmental level or by the general public. Users requiring information regarding hazardous conditions or meteorological conditions for specific geographic areas should consult directly with their city or county emergency management office.

54 ENVIRONMENTAL SCIENCES↗