Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Personal Computer Transport Analysis Program

The Personal Computer Transport Analysis Program (PCTAP) is C++ software used for analysis of thermal fluid systems. The program predicts thermal fluid system and component transients. The output consists of temperatures, flow rates, pressures, delta pressures, tank quantities, and gas quantities in the air, along with air scrubbing component performance. PCTAP s solution process assumes that the tubes in the system are well insulated so that only the heat transfer between fluid and tube wall and between adjacent tubes is modeled. The system described in the model file is broken down into its individual components; i.e., tubes, cold plates, heat exchangers, etc. A solution vector is built from the components and a flow is then simulated with fluid being transferred from one component to the next. The solution vector of components in the model file is built at the initiation of the run. This solution vector is simply a list of components in the order of their inlet dependency on other components. The component parameters are updated in the order in which they appear in the list at every time step. Once the solution vectors have been determined, PCTAP cycles through the components in the solution vector, executing their outlet function for each time-step increment.

DiStefano, Frank, III↗
NASA NTRS2014

NuSTAR Discovery of a Cyclotron Line in KS 1947+300

We present a spectral analysis of three simultaneous Nuclear Spectroscopy Telescope Array and Swift/XRT observations of the transient Be-neutron star binary KS 1947+300 taken during its outburst in 2013/2014. These broadband observations were supported by Swift/XRTmonitoring snapshots every three days, which we use to study the evolution of the spectrum over the outburst.We find strong changes of the power-law photon index, which shows a weak trend of softening with increasing X-ray flux. The neutron star shows very strong pulsations with a period of P ≈ [almost equal to] 18.8 s. The 0.8-79 keV broadband spectrum can be described by a power law with an exponential cutoff and a blackbody component at low energies. During the second observation we detect a cyclotron resonant scattering feature at 12.5 keV, which is absent in the phase-averaged spectra of observations 1 and 3. Pulse phase-resolved spectroscopy reveals that the strength of the feature changes strongly with pulse phase and is most prominent during the broad minimum of the pulse profile. At the same phases the line also becomes visible in the first and third observation at the same energy. This discovery implies that KS 1947+300 has a magnetic field strength of B ≈ [almost equal to] 1.1 × 1012(1 + z) G, which is at the lower end of known cyclotron line sources.

radiation: dynamics↗
NASA NTRS2020

Quasi-static and Fatigue Delamination at Tape/Fabric Interfaces

The relationship between quasi-static and fatigue delamination of a fabric/tape interface is examined experimentally and numerically.Mixed-mode bending tests were conducted using specimens in which a mid-plane delamination is bound between a ply of 0-degree unidirectional tape and a 0-degree fabric ply of the same material system. The experimental results indicate that delaminations tend to migrate towards the constraining ply that is on the compressive side of the laminate in bending, and that the fracture toughness for a fabric-constrained delamination is almost twice that of a tape-constrained delamination. A cohesive model based on superposition of bilinear laws was used to account for these differences in measured properties. Fatigue analyses were conducted with a cohesive damage model that uses an idealization of stress-life diagrams used in engineering design. The fatigue model is shown to be capable of predicting the steady-state rate of delamination propagation described by the Paris law, as well as the initial transients that depend on the quasi-static R-curve effects. The analysis results help quantify the effects of fracture toughness and R-curves on the rates of delamination propagation in fatigue.

Davila, Carlos G.↗
NASA NTRS1988

Comparison of experimental rotor damping data-reduction techniques

The ability of existing data reduction techniques to determine frequency and damping from transient time-history records was evaluated. Analog data records representative of small-scale helicopter aeroelastic stability tests were analyzed. The data records were selected to provide information on the accuracy of reduced frequency and decay coefficients as a function of modal damping level, modal frequency, number of modes present in the time history record, proximity to other modes with different frequencies, steady offset in time history, and signal-to-noise ratio. The study utilized the results from each of the major U.S. helicopter manufacturers, the U.S. Army Aeroflightdynamics Directorate, and NASA Ames Research Center using their inhouse data reduction and analysis techniques. Consequently, the accuracy of different data analysis techniques and the manner in which they were implemented were also evaluated. It was found that modal frequencies can be accurately determined even in the presence of significant random and periodic noise. Identified decay coefficients do, however, show considerable variation, particularly for highly damped modes. The manner in which the data are reduced and the role of the data analyst was shown to be important. Although several different damping determination methods were used, no clear trends were evident for the observed differences between the individual analysis techniques. It is concluded that the data reduction of modal-damping characteristics from transient time histories results in a range of damping values.

Warmbrodt, William↗
NASA NTRS1977

Transient structure in the high-energy X-ray light curve of NP 0532

The paper reports the observation of pulsed fractions in the primary and secondary peaks, as well as in the interpulse region, of the high-energy X-ray light curve of NP 0532. A statistical analysis of light-curve data is performed, and a similar analysis is carried out using simulated data. It is concluded that a previously reported third peak in the light curve was transient in nature.

Ryckman, S. G.↗
NASA NTRS1998

Review of Shuttle Microgravity Acceleration Data: Vibratory and Transient

Knowledge about the acceleration environment on the National Aeronautics and Space Administration's Space Shuttle plays an important role in conducting many microgravity science experiments. The Microgravity Measurement and Analysis Program at the Lewis Research Center measures and characterizes the acceleration environment of the Shuttle and other free-fall platforms. The Space Acceleration Measurement System has been the primary source of Shuttle vibratory and transient acceleration data. These data, along with those from other accelerometer systems, have been analyzed by the Principal Investigator Microgravity Services team in order to identify, qualify, and quantify the effects of various acceleration disturbances. This paper highlights and summarizes the results of these analyses.

Hrovat, Kenneth↗
NASA NTRS1981

Analysis of a cooled, turbine blade or vane with an insert

Computer program, TACTI, has been developed to calculate transient and steady-state temperatures, pressures, and flow in cooled turbine blade or vane with impingement insert. Coolant-side heat-transfer coefficients are calculated internally in program, with user specifying 1 of 3 modes of heat transfer at each station: impingement (including effect of crossflow); or forced convection over pin fins.

Saugler, R. E.↗
NASA NTRS1991

Elasto-plastic coupled temperature-displacement finite element analysis of two-dimensional rolling-sliding contact with a translating heat source

The present paper describes a transient translating elastoplastic thermomechanical finite element model to study two-dimensional frictional rolling contact. Frictional two-dimensional contact is simulated by repeatedly translating a nonuniform thermomechanical distribution across the surface of an elastoplastic half space. The half space is represented by a two-dimensional finite element mesh with appropriate boundaries. Calculations are for an elastic-perfectly plastic material and the selected thermophysical properties are assumed to be temperature independent. The paper presents temperature variations, stress and plastic strain distributions and deformations. Residual tensile stresses are observed. The magnitude and depth of these stresses depends on (1) the temperature gradients and (2) the magnitudes of the normal and tangential tractions.

Rubin, C. A.↗
NASA NTRS1975

Fully unsteady subsonic and supersonic potential aerodynamics for complex aircraft configurations with applications to flutter

A general formulation is presented for the analysis of steady and unsteady, subsonic and supersonic aerodynamics for complex aircraft configurations. The theoretical formulation, the numerical procedure, the description of the program SOUSSA (steady, oscillatory and unsteady, subsonic and supersonic aerodynamics) and numerical results are included. In particular, generalized forces for fully unsteady (complex frequency) aerodynamics for a wing-body configuration, AGARD wing-tail interference in both subsonic and supersonic flows as well as flutter analysis results are included. The theoretical formulation is based upon an integral equation, which includes completely arbitrary motion. Steady and oscillatory aerodynamic flows are considered. Here small-amplitude, fully transient response in the time domain is considered. This yields the aerodynamic transfer function (Laplace transform of the fully unsteady operator) for frequency domain analysis. This is particularly convenient for the linear systems analysis of the whole aircraft.

Tseng, K.↗
NASA NTRS1985

Generalized reciprocity theorem for semiconductor devices

A reciprocity theorem is presented that relates the short-circuit current of a device, induced by a carrier generation source, to the minority-carrier Fermi level in the dark. The basic relation is general under low injection. It holds for three-dimensional devices with position dependent parameters (energy gap, electron affinity, mobility, etc.), and for transient or steady-state conditions. This theorem allows calculation of the internal quantum efficiency of a solar cell by using the analysis of the device in the dark. Other applications could involve measurements of various device parameters, interfacial surface recombination velocity at a polcrystalline silicon emitter contact, for rexample, by using steady-state or transient photon or mass-particle radiation.

Misiakos, K.↗
NASA NTRS2023

New Transient Finite Energy Shock Prediction Methodology

Shock prediction is one of the top loads and dynamics discipline technical challenges identified within NASA and industry programs and projects. The physics-based Transient Finite Energy (TFE) shock prediction methodology has been developed and compared favorably against test results. TFE can provide another approach to develop predictions of shock response spectra (SRS) for use in the analysis of structural margins.

NESC Technical Bulletin No. 23-03↗
NASA NTRS1991

An isentropic compression-heated Ludweig tube transient wind tunnel

Theoretical development and experimental results show that the Ludweig tube with isentropic heating (LICH) transient wind tunnel described is a viable means of producing flow conditions that are suitable for a variety of experimental investigations. A complete analysis of the wave dynamics of the pump tube compression process is presented. The LICH tube operating conditions are very steady and run times are greater than those of other types of transient facilities such as shock tubes and gas tunnels. This facility is well suited for producing flow conditions that are dynamically similar to those found in a gas turbine, i.e., transonic Mach number, gas-to-wall temperature ratios of about 1.5, and Reynolds numbers greater than 10 to the 6th.

Magari, Patrick J.↗
NASA NTRS1975

Transient flight flutter test of a wing with tip tanks

Wing flutter was encountered during flight testing of the F2H-2 airplane with full wing tip tanks. As a result, more refined theoretical analysis as well as flight flutter tests were initated to establish corrective measures and to experimentally verify the stability of the improved system. The results from the flight flutter tests, utilizing the transient response technique, are presented. The method of excitation consisted of abrupt deflections of the ailerons resulting from stick bangs and data were measured by wing tip accelerometers. A comparison of the results with theoretical predictions is presented and indicates that reasonably good correlation was obtained. The influence on wing flutter of tip tank fuel transfer cycle, which was incorporated to control the center of gravity range of the tank during defueling, is indicated by the measured results and compared with the theory. The final configuration utilized a transfer cycle which was proven stable as a result of flight flutter testing. It is concluded that transient response measurements resulting from stick bangs provide a reasonably reliable and safe technique of flight flutter testing for wings with external tanks or heavy stores.

Werdes, R. J.↗
NASA NTRS2001

Method Improvements in Thermal Analysis of Mach 10 Leading Edges

Several improvements have recently been made in the thermal analysis methods for leading edges of a hypersonic vehicle. The leading edges of this vehicle undergo exceptionally high heat loads that incorporate extreme spatial gradients as well as severe transients. Due to the varying flight conditions, complex geometry, and need for thermal loads at many points along the trajectory, full computational fluid dynamics (CFD) analysis of the aeroheating; loads is not feasible. Thus, engineering methods must be used to determine the aeroheating on the vehicle surfaces, and that must be utilized in the thermal analysis. Over the last year, the thermal analysis of a hypersonic vehicle has been enhanced in several ways. Two different engineering codes are used to predict aeroheating loads: one over the curve near the stagnation point, and the other on flat surfaces downstream of the leading edge. These two are matched together at the intersection point using a method that allows closer approximation of CFD results. User-developed FORTRAN, which is part of the thermal solver PATRAN Thermal, is used to accomplish this. The customizable FORTRAN code also allows use of many different time- and space-dependent factors, interpolation of the heat load in time and space, and inclusion of both highly swept and unswept grid structures. This FORTRAN is available to other PATRAN users who may want to accomplish a similar objective in analysis. Flux, rather than convective coefficient, is used to define heat loads, which allows more accurate analysis as well as better application of margins. Improvements have also been made in more efficient utilization of imported CAD geometry, by creating faces on solids to facilitate load application.

Amundsen, Ruth M.↗
NASA NTRS1999

Vertical Structure in Outer Planet Atmospheres

The period covered by this cooperative agreement included: 1) the analysis of data acquired by both Voyager spacecraft during their encounters with Saturn in 1979 and 1980; 2) work on Uranus' seasonal variability and transient albedo features on both Uranus and Neptune using observations made by the Hubble Space Telescope beginning in 2000; 3) a search for lightning on Jupiter using HST; and 4) the analysis of Pathfinder images of Martian surface features.

Rages, Kathy A.↗
NASA NTRS2019

Gravitational Changes of the Earth's Free Oscillation From Earthquakes: Theory and Feasibility Study Using GRACE Inter‐Satellite Tracking

GRACE satellites have detected regional‐scale preseismic, coseismic, and postseismic gravity changes associated with great earthquakes during the GRACE era (2002‐2017). Earthquakes also excite global‐scale transient gravity changes associated with free oscillations that may be discerned for a few days. In this study, we examine such global gravity changes due to Earth's free oscillations and quantify how they affect GRACE measurements. We employ the normal mode formalism to synthesize the global gravity changes after the 2004 Sumatra earthquake and simulate the (gravitational) free oscillation signals manifested in the GRACE K‐band ranging (KBR) measurements. Using the Kaula orbit perturbation theory, we show how GRACE inter‐satellite distances are perturbed through a complex coupling of eigenfrequencies of the normal modes with the Earth's rotation rate and the GRACE satellites' orbital frequency. It is found that a few gravest normal modes can generate range‐rate perturbations as large as 0.2 μm/s, which are comparable to actual errors of GRACE KBR ranging and accelerometer instruments. Wavelet time‐frequency analysis of the GRACE KBR residual data in December 2004 reveals the existence of a significant transient signal after the 2004 Sumatra earthquake. This transient signal is characterized by a frequency of ~0.022 mHz that could be potentially associated with the largest excitation due to the “football” mode of the Earth's free oscillation. However, the results are also affected by low‐frequency noise of the GRACE accelerometers. Improved space‐borne gravitational instrumentation may open new opportunities to study the Earth's interior and earthquakes independently from global seismological analysis.

Ghobadi-Far, Khosro↗
NASA NTRS1977

Discrete time domain modelling and analysis of dc-dc converters with continuous and discontinuous inductor current

Using discrete time state variable representation, a generalized computer-aided modeling and analysis of dc-dc converters is presented. The methodology provides exact modeling and is applicable to all types of power stages and duty-cycle control, including continuous and discontinuous inductor current operation. Converter stability, transient behavior and audio susceptibility can be analytically evaluated and predicted. The generalized theory of the proposed approach to converter modeling and analysis is presented first, followed by a demonstrative example applying the theory to a constant frequency buck converter operating in continuous and discontinuous inductor current mode. Excellent agreement with laboratory test data has been observed.

Iwens, R. P.↗