Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Design of layered transformation-optics devices of arbitrary shape

Transformation-optics devices of arbitrary shapes usually result in material parameters inside the device that feature level sets of different shapes. Consequently, these devices cannot easily be implemented using a layered architecture and thus are, generally, more difficult to realize in practice. We present a method of designing two-dimensional transformation-optics devices of arbitrary shapes characterized by material parameters of same-level sets, thus suitable to be implemented through concentric layers, each layer being made of a single type of material or metamaterial. Remarkably, we show that transformations leading to such designs are obtained from solutions to the well-known eikonal equation. This approach allows fabrication techniques developed for cylindrical designs of circular cross section to be directly applied to devices of other shapes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial transformation of coherent optical waves with orbital morphologies

We theoretically verify that converting the Hermite-Gaussian modes into the Laguerre-Gaussian can lead to the spatial morphologies of the two-dimensional (2D) coherent states to be transformed from Lissajous figures to trochoidal curves. With this transformational relationship, we experimentally generate various structured light beams by exploiting a cylindrical-lens mode converter to transform the optical Lissajous modes. The present investigation manifests a notable method to generate optical coherent waves with various orbital spatial morphologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transformation optics in nonvacuum initial dielectric media

Previous formulations of transformation optics have generally been restricted to transformations from relatively simple initial media, such as the vacuum, because of limitations due to their noncovariance. I show that a completely covariant approach enables arbitrary transformations from arbitrarily complex initial linear dielectrics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Darboux transformation for a generalized Hirota-Satsuma coupled Korteweg-de Vries equation

A Darboux transformation for the generalized Hirota-Satsuma coupled Korteweg-de Vries (KdV) equation is derived with the aid of the gauge transformation between the corresponding 4x4 matrix spectral problems with three potentials, by which some explicit solutions of the generalized Hirota-Satsuma coupled KdV equation are constructed. As a reduction, a Darboux transformation of the complex coupled KdV equation and its explicit solutions are obtained.

97 MATHEMATICS AND COMPUTING↗

Stable Glass Transformation to Supercooled Liquid via Surface-Initiated Growth Front

Highly stable glasses of tris-naphthylbenzene transform into a liquid when annealed above the glass transition temperature T{sub g}. In contrast to the predictions of standard models, the observed transformation is spatially inhomogeneous. Secondary ion mass spectrometry experiments on isotopically labeled multilayer films show that the liquid grows into the stable glass with sharp growth fronts initiated at the free surface and at the interface with the substrate. For the free surface, the growth velocity is constant in time and has the same temperature dependence as self-diffusion in the equilibrium supercooled liquid. These stable glasses are packed so efficiently that surfaces and interfaces are required to initiate the transformation to the liquid even well above T{sub g}.

36 MATERIALS SCIENCE↗

Nondissipative Martensitic Phase Transformation after Multimillion Superelastic Cycles

Superelastic alloys used for stents, biomedical implants, and solid-state cooling devices rely on their reversible stress-induced martensitic transformations. These applications require the alloy to sustain high deformability over millions of cycles without failure. Here, we report an alloy capable of enduring 10 × 10 7 tensile stress-induced phase transformations while still exhibiting over 2% recoverable elastic strains. After millions of cycles, the alloy is highly reversible with zero stress hysteresis. We show that the major martensite variant is reversible even after multimillions of cycles under tensile loadings with a highly coherent $(1\bar{1}0)_A$ interface. Finally, this discovery provides new insights into martensitic transformation, and may guide the development of superelastic alloys for multimillion cycling applications.

36 MATERIALS SCIENCE↗

General approaches for shear-correcting coordinate transformations in Bragg coherent diffraction imaging. Part II

X-ray Bragg coherent diffraction imaging (BCDI) has been demonstrated as a powerful 3D microscopy approach for the investigation of sub-micrometre-scale crystalline particles. The approach is based on the measurement of a series of coherent Bragg diffraction intensity patterns that are numerically inverted to retrieve an image of the spatial distribution of the relative phase and amplitude of the Bragg structure factor of the diffracting sample. This 3D information, which is collected through an angular rotation of the sample, is necessarily obtained in a non-orthogonal frame in Fourier space that must be eventually reconciled. To deal with this, the approach currently favored by practitioners (detailed in Part I) is to perform the entire inversion in conjugate non-orthogonal real- and Fourier-space frames, and to transform the 3D sample image into an orthogonal frame as a post-processing step for result analysis. In this article, which is a direct follow-up of Part I, two different transformation strategies are demonstrated, which enable the entire inversion procedure of the measured data set to be performed in an orthogonal frame. The new approaches described here build mathematical and numerical frameworks that apply to the cases of evenly and non-evenly sampled data along the direction of sample rotation ( i.e. the rocking curve). The value of these methods is that they rely on the experimental geometry, and they incorporate significantly more information about that geometry into the design of the phase-retrieval Fourier transformation than the strategy presented in Part I. Finally, two important outcomes are (1) that the resulting sample image is correctly interpreted in a shear-free frame and (2) physically realistic constraints of BCDI phase retrieval that are difficult to implement with current methods are easily incorporated. Computing scripts are also given to aid readers in the implementation of the proposed formalisms.

36 MATERIALS SCIENCE↗

Room-temperature photo-induced martensitic transformation in a protein crystal

Martensitic transformations are the first-order crystal-to-crystal phase transitions that occur mostly in materials such as steel, alloys and ceramics, thus having many technological applications. These phase transitions are rarely observed in molecular crystals and have not been detected in protein crystals. Reversibly switchable fluorescent proteins are widely used in biotechnology, including super-resolution molecular imaging, and hold promise as candidate biomaterials for future high-tech applications. Here, we report on a reversibly switchable fluorescent protein, Tetdron, whose crystals undergo a photo-induced martensitic transformation at room temperature. Room-temperature X-ray crystallography demonstrates that at equilibrium Tetdron chromophores are all in the trans configuration, with an ∼1:1 mixture of their protonated and deprotonated forms. Irradiation of a Tetdron crystal with 400 nm light induces a martensitic transformation, which results in Tetdron tetramerization at room temperature revealed by X-ray photocrystallography. Crystal and solution spectroscopic measurements provide evidence that the photo-induced martensitic phase transition is coupled with the chromophore deprotonation, but no trans–cis isomerization is detected in the structure of an irradiated crystal. It is hypothesized that protein dynamics assists in the light-induced proton transfer from the chromophore to the bulk solvent and in the ensuing martensitic phase transition. The unique properties of Tetdron may be useful in developing novel biomaterials for optogenetics, data storage and nanotechnology.

36 MATERIALS SCIENCE↗

Additive Manufacturing of Coreless Flyback Transformers Using Aerosol Jet Printing and Electrochemical Deposition

An additive manufacturing approach combining aerosol jet printing (AJP) and electrodeposition opens a new pathway to the production of lightweight coreless flyback transformer devices for power electronics. AJP of seed layers with resolution on the order of 30 μm is combined with electrodeposition of Cu and Ni for decreased resistance. This combined approach addresses known shortcomings of AJP and electrodeposition. Nanoparticle inks used in AJP of metals have low conductivity versus bulk materials due to their high grain boundary resistance. There is a lack of readily available high-resolution patterning techniques for electrodeposition outside of expensive clean-room-based lithography techniques. Combining these two techniques enables the patterning of high-resolution, high-conductivity components. Here in this manuscript, we report on the construction of coreless flyback transformers consisting of two-layer primary and two-layer secondary spiral inductors separated by layers of a printed UV-curable dielectric. An input voltage of 17 V at 400 kHz was amplified to an output of 1250 V corresponding to a gain of 73.5. COMSOL modeling at the individual inductor level and at the transformer level was used to compare expected inductance, equivalent series resistance (ESR), and coupling with experimentally measured values.

36 MATERIALS SCIENCE↗

An Integrated Method of ANFIS and Dempster-Shafer Theory for Fault Diagnosis of Power Transformer

Dissolved gas analysis (DGA) approach is extensively applied to detect incipient faults of power transformers. This paper presents a novel DGA method for power transformer incipient fault diagnosis based on integrated adaptive neuro fuzzy inference system (ANFIS) and Dempster-Shafer Theory (DST). Four out of seven common conventional methods which are studied and compared for better consistency and accuracy, are used to develop new ANFIS based fault diagnosis models. To promote fault diagnostic performance further and make fault decision process more reliable and reasonable, an improved DST is introduced to integrate outputs of each ANFIS based model, and to provide comprehensive and convincing fault diagnosis results. The fault diagnosis capability of the proposed method is validated by a reported fault dataset and 10-fold cross validation experiment. The performance of the proposed method is compared with conventional approaches and ANFIS based models which demonstrate that the proposed method is superior to other methods and is more effective and stable for power transformer fault diagnosis with high accuracy and consistency.

adaptive nuero fuzzy inference system↗

Novel Rotary Transformer Topology With Improved Power Transfer Capability for High-Speed Applications

This article proposes a new rotary transformer topology enabling reduction of leakage inductances and significant improvement of power transfer capability compared to traditional topologies thanks to its interleaved windings and resonant compensation circuits. The proposed rotary transformer features a nonferrite rotating part made of lightweight strong nonconductive and nonmagnetic composite material and a large air gap, allowing safe operation at high rotational speeds. Hence, this novel rotary transformer can enable the adoption of wound rotor synchronous machines for electric or hybrid vehicle traction. Finally, the performance of the proposed new topology was evaluated and compared to the conventional one. Significant performance improvement was confirmed. A 10-kW proof of concept prototypes was built, and the test has validated the power transfer capability with 95.9% efficiency.

33 ADVANCED PROPULSION SYSTEMS↗

Photo-and pressure-induced transformations in the linear orthorhombic polymer of C{sub 60}

Stability of the linear orthorhombic polymer of C{sub 60} under pressure and laser irradiation is studied by Raman scattering and X-ray diffraction measurements. The Raman spectrum at ambient pressure remains unchanged, in the time scale of the experiment, up to an intensity of 3200 W/cm{sup 2} of the 514.5 nm line of an Ar{sup +} laser, but irreversible changes are observed at higher intensities. The Raman spectra recorded at increased pressure show similar irreversible changes even at the laser intensity as low as 470 W/cm{sup 2}. The X-ray diffraction and Raman measurements of the pressure-treated samples, performed after pressure release, show that the nonirradiated material does not exhibit any changes in the crystal structure and phonon spectra. This behavior indicates a pressure-enhanced photo-induced transformation to a new polymeric phase characterized by a Raman spectrum that differs from those of the other known polymeric phases of C{sub 60}. The Raman spectra of the phototransformed linear orthorhombic polymer of C{sub 60} were measured at a pressure of up to 29 GPa. The pressure dependence of the Raman mode frequencies show singularities near 4 GPa and 15 GPa, respectively, related to a reversible phase transition and an irreversible transformation to a metastable disordered phase. The diffuse Raman spectrum of the disordered phase does not exhibit substantial changes with an increase in pressure up to 29 GPa. The high-pressure phase transforms to a mixture of pristine and dimerized C{sub 60}, after pressure release and exposure to ambient conditions for 30 h.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the Effect of Small-Angle Scattering by Density Fluctuations on the Efficiency of Linear Transformation of Ordinary and Extraordinary Waves in a Toroidally Inhomogeneous Plasma

We have analyzed the efficiency of tunneling of quasi-optical wave beams through the evanescent region in the vicinity of plasma cutoff in a randomly inhomogeneous magnetoactive plasma. A new theoretical model proposed here makes it possible to study the effect of a random phase modulation induced by density fluctuations in the wave beam path on the efficiency of the linear transformation of waves in the 2D geometry corresponding to the experimental conditions for heating the overdense plasma in toroidal magnetic systems. We have derived a general analytic expression connecting the wave beam coefficient of transformation averaged over the ensemble of random wave field realizations with its phase correlation function. We have analyzed the dependence of the coefficient of transformation on the correlation length for the random phase distribution in the beam and on the traversed path length to the interaction region. The threshold value of the path length above which the fluctuations produce a dominating effect has been determined. The importance of taking into account the 2D effects has been demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supersymmetry and Darboux transformations for the generalized Schroedinger equation

We construct Darboux transformations for a generalized Schroedinger equation by means of the intertwining operator method. We establish a relation between first-order Darboux transformations, supersymmetry, and factorization of the Hamiltonians that are associated with our generalized Schroedinger equation. Furthermore, our methods allow for the generation of isospectral potentials, where one of the potentials has additional or less bound states than its partner. In the particular case of a conventional Schroedinger equation our generalized Darboux transformations reduce correctly to the well-known expressions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite Hamiltonian systems: Linear transformations and aberrations

Finite Hamiltonian systems contain operators of position, momentum, and energy, having a finite number N of equally-spaced eigenvalues. Such systems are under the aeis of the algebra su(2), and their phase space is a sphere. Rigid motions of this phase space form the group SU(2); overall phases complete this to U(2). But since N-point states can be subject to U(N) superset of U(2) transformations, the rest of the generators will provide all N{sup 2} unitary transformations of the states, which appear as nonlinear transformations-aberrations-of the system phase space. They are built through the 'finite quantization' of a classical optical system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New parametrization of lorentz transformations and tachyonic motion in special theory of relativity

Assuming the existence of an invariant velocity a slightly generalized form of Lorentz transformations is derived. The group of these transformations has a simpler composition law than the group of standard Lorentz transformations has. It is shown that this new form allows the description of both subluminal and superluminal motions. It also allows to find all velocity-dependent tensors. In particular, the tachyonic momentum as a function of superluminal velocity is derived.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Darboux transformations in integral and differential forms for generalized Schroedinger equations

The Darboux transformation operator technique is applied to the generalized Schroedinger equation with a position-dependent effective mass and with linearly energy-dependent potentials. Intertwining operators are obtained in an explicit form and used for constructing generalized Darboux transformations. An interrelation is established between the differential and integral transformation operators. It is shown how to construct the quantum well potentials in nanoelectronic with a given spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cascade Transformer Based on the Volume Coil for Power Transmission under High Voltage

The use of an electronic cooling system at the High Intensity heavy ion Accelerator Facility (HIAF) accelerator complex, which is being developed at the Institute of Modern Physics (China), to improve the efficiency of ion injection into the accelerator and reduce the spread of ion pulses in the beam has been proposed. Electron cooling of the ion beam was carried out due to the interaction of ions with a continuous electron beam with a current of up to 3 A, energy of up to 450 keV, and energy stability at the level of 10{sup –4} or better. The electron beam energy recuperation was carried out at the expense of a power source with a power of 5–15 kW, which was located at the top of a high-voltage column—a high-voltage terminal. The operation of a prototype of power transmission system, which was based on a cascade transformer with a volumetric coil, has been considered. Such a transformer has a relatively low scattering inductance, which can significantly reduce the number of capacitors to compensate for it. It has been shown that this design made it possible to transfer power of up to 40 kW at small dimensions of the transformer and heat dissipation in it was not more than 10 kW.

43 PARTICLE ACCELERATORS↗