Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

A photochemical proposal for the preparation of ZnAl{sub 2}O{sub 4} and MgAl{sub 2}O{sub 4} thin films from β-diketonate complex precursors

Highlights: • ZnAl{sub 2}O{sub 4} and MgAl{sub 2}O{sub 4} thin films were prepared by photo-chemical method. • The Zn(II), Mg(II) and Al(III) β-diketonate complexes were used as precursors. • The photochemical reaction was monitored by UV–vis and FT-IR spectroscopy. • The results reveal spinel oxide formation and the generation of intermediate products. - Abstract: ZnAl{sub 2}O{sub 4} and MgAl{sub 2}O{sub 4} thin films were grown on Si(100) and quartz plate substrates using a photochemical method in the solid phase with thin films of β-diketonate complexes as the precursors. The films were deposited by spin-coating and subsequently photolyzed at room temperature using 254 nm UV light. The photolysis of these films results in the deposition of metal oxide thin films and fragmentation of the ligands from the coordination sphere of the complexes. The obtained samples were post-annealed at different temperatures (350–1100 °C) for 2 h and characterized by FT-Infrared spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force miscroscopy (AFM), and UV–vis spectroscopy. The results indicate the formation of spinel-type structures and other phases. These characteristics determined the quality of the films, which were obtained from the photodeposition of ternary metal oxides.

36 MATERIALS SCIENCE↗

Effect of deposition temperature on the structural and optical properties of CdSe QDs thin films deposited by CBD method

Highlights: • Synthesis of CdSe QDs with L-Cysteine capping agent for applications in nanodevices. • The films of CdSe QDs present uniform and good dispersive particles at the surface. • Effect of bath temperature on the structural and optical properties of CdSe QDs thin films. • Investigation of the optical constants and dispersion parameters of CdSe QDs thin films. - Abstract: Cadmium selenide quantum dots (CdSe QDs) thin films were deposited onto glass substrates by a chemical bath deposition (CBD) method at different temperatures from an aqueous solution containing L-Cysteine (L-Cys) as capping agent. The evolution of the surface morphology and elemental composition of the CdSe films were studied by AFM, SEM, and EDX analyses. Structural and optical properties of CdSe thin films were investigated by XRD, UV–vis and PL spectroscopy. The dispersion behavior of the refractive index is described using the single oscillator Wemple-DiDomenico (W-D) model, and the physical dispersion parameters are calculated as a function of deposition temperature. The dispersive optical parameters such as average oscillator energy (E{sub o}), dispersion energy (E{sub d}), and static refractive index (n{sub o}) were found to vary with the deposition temperature. Besides, the electrical free carrier susceptibility (χ{sub e}) and the carrier concentration of the effective mass ratio (N/m*) were evaluated according to the Spitzer-Fan model.

36 MATERIALS SCIENCE↗

Realization of strong violet and blue emissions from ZnO thin films by incorporation of Cu ions

Highlights: • A strong blue-violet co-emission occurs after Cu ions are doped into ZnO thin films.. • The violet emission centered at 430 nm is attributed to transitions of electrons from conduction band to Cu{sup +} acceptor levels. • The blue emission centered at 470 nm is attributed to transitions of electrons from Cu{sup 2+} donor levels to Cu{sup +} acceptor levels. • Both the violet and blue emissions decrease when Cu-doping concentration is higher than 2 at.%. - Abstract: In recent years, Cu-doped ZnO materials have attracted wide attention due to some unique properties, such as p-type conduction, room-temperature ferromagnetism and plentiful luminescence behavior. In this work, Cu-doped ZnO thin films with different doping levels were prepared by sol–gel method. The structural, morphological features and the composition of the samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX), respectively. The optical properties were analyzed by the UV–visible transmittance spectra and fluorescence spectra. The Cu-doping in a low concentration does not influence the crystal phase of wurtzite ZnO and has a very small impact on c-axis preferred orientation of ZnO thin films. With the increase of Cu-doping concentration, the Cu ions are gradually changed from dominant Cu{sup +} ions to dominant Cu{sup 2+} ions. Cu-doping in a low concentration caused strong blue-violet emissions in ZnO thin films. The violet emission is attributed to the transition of electrons from the conduction band to Cu{sup +} acceptor levels, and the blue emission is ascribed to the transition of electrons from Cu{sup 2+} donor levels to Cu{sup +} acceptor levels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing induced microstructure engineering of antimony tri-selenide thin films

Highlights: • Deposition of Sb{sub 2}Se{sub 3} thin films using thermal vapour deposition. • Films are deposited on substrates with concurrent heating and without heating. • Effect of post deposition annealing on the two types of films are investigated. • Influence of temperature and processing conditions on optical band gap are probed. • This Sb{sub 2}Se{sub 3} films can find application in solar cells and optoelectronic devices. - Abstract: The presented work demonstrates the effect of annealing on the structural, surface morphology and optical properties of Antimony Triselenide (Sb{sub 2}Se{sub 3}) thin films deposited by thermal evaporation. Two sets of thin films of Sb{sub 2}Se{sub 3} were grown on soda lime glass (SLG) substrates by thermal evaporation with and without substrate heating. Both sets of films were then annealed at three distinct temperatures (100 °C, 200 °C and 300 °C) to study the effects of annealing on the microstructure. Analysis using XRD (X-Ray Diffraction) characterization revealed that the as-deposited films without substrate heating exhibit an amorphous nature, whereas the films grown with concurrent substrate heating are polycrystalline with orthorhombic structure. The films annealed at high temperature with concurrent substrate heating possess smooth and continuous grain morphologies. The effect of annealing was also found to have significant impact on the band gap and optical properties of the Sb{sub 2}Se{sub 3} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nd3+ Doping effect on the optical and electrical properties of SnO2 thin films prepared by nebulizer spray pyrolysis for opto-electronic application

Highlights: • High quality, Nd:SnO{sub 2} thin films prepared using simple nebulizer spray pyrolysis technique. • Characterizations of the films confirmed good crystallinity and smooth surface morphology. • High optical transparency with low electrical resistivity in nebulizer spray pyrolysis prepared Nd: SnO{sub 2} thin films is presented. - Abstract: Neodymium doped tin oxide (Nd: SnO{sub 2}) thin films were deposited on heated glass substrates with different Nd concentrations (0, 2, 4 and 6 %) by nebulizer spray pyrolysis method. Effects of Nd doping on structural, optical and electrical properties of the prepared films were investigated. X-ray diffraction study confirmed that all the deposited Nd: SnO{sub 2} films are in polycrystalline tetragonal structure with (211) preferential orientation. FESEM images showed that the prepared SnO{sub 2} particles are in nano-size in spherical shape, completely covering the substrate. AFM topology showed smooth deposition of the films with minimum surface roughness. The films showed maximum optical transmittance 90 % in the visible region with a band gap value 3.67 eV, also showed low refractive index and extinction coefficients. Room temperature photoluminescence (PL) spectrum exhibited a strong UV emission peak at 356 nm for all the films. All the Nd: SnO{sub 2} films displayed n-type conductivity with low electrical resistivity 5.88 × 10{sup −4} (Ω cm) for 4 % Nd doping. As the films showed good figure of merit (ϕ) values, these Nd doped SnO{sub 2} thin films can perform better role in optoelectronic device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tungsten-doped vanadium dioxide thin film based tunable antenna

Highlights: • VO{sub 2} and W-doped VO{sub 2} thin films were successfully synthesized by reactive PLD process. • By using the films, thermally tunable and switchable bowtie RF antenna structures were designed, fabricated, and tested. • The thin film based RF antenna structures were fully functional with a successful frequency tuning capability. - Abstract: Since vanadium dioxide (VO{sub 2}) is a phase change material that shows a metal to insulator transition behavior at a temperature near 68℃, it has many potential applications in the areas of science and engineering. In this study, tungsten (W) -doped VO{sub 2} thin films were synthesized by pulsed laser deposition (PLD) technique with a metallic vanadium target and W-wires which were simply attached on the surface of the vanadium target. Also, bowtie RF antenna structures were fabricated by using the films to check the frequency tunability. The experimental results show a decrease of the transition temperature and a broadening of the phase transition as the atomic percentage of W increases in the film structure. The results also reveal that the W-doped VO{sub 2} thin film based RF antenna was fully functional with the successful frequency tuning capability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterization of Cu3SbSe4 thin films through thermally diffusing Sb2Se3 – CuSe by chemical bath deposition (CBD)

Highlights: • Cu{sub 3}SbSe{sub 4} films were formed by chemical bath deposition followed by a heat treatment. • Prepared Cu{sub 3}SbSe{sub 4} thin films have promising properties to absorbing layer in a solar cell or thermoelectric material. • Electrical conductivity values of Cu{sub 3}SbSe{sub 4} are high, considering its manufacturing method and the previous reports in the field. - Abstract: In the present work, Cu{sub 3}SbSe{sub 4} thin films have been successfully synthesized by chemical bath deposition (CBD) involving a sequential deposition of antimony selenide (Sb{sub 2}Se{sub 3}) and copper selenide (CuSe) films and then annealing in a vacuum atmosphere. The influence of CuSe deposition time on the previously deposited Sb{sub 2}Se{sub 3} films was investigated to obtain the ternary phase. A study of the structural, morphological, optical and electrical properties of these films was carried out using appropriate characterization techniques. X-ray diffraction analysis revealed that the films show a tetragonal crystalline crystalline structure corresponding to the Permingeatite phase (Cu{sub 3}SbSe{sub 4}). The crystal size increases with the CuSe deposition time. It is identified by Raman spectroscopy that at low CuSe deposition times a low concentration of Sb{sub 2}Se{sub 3} coexists in the thin film. The optical band gap energy of these films was evaluated in the range of 0.67–1.18 eV, decreasing by increasing CuSe deposition time. By field-emission scanning electron microscopy (FESEM) a morphological study was carried out, observing that by increasing the deposition time of CuSe there is an increase of agglomerates and decrease the porosity in the samples. An elemental analysis was carried out by energy dispersive X-ray spectroscopy to observe the composition and elemental distribution in the ternary compound. The films showed a p-type electrical conductivity with values between 0.417 and 55.55 (Ω cm{sup −1}). The mobility and carrier density were performed by Hall Effect and Thermoelectric measurements observing a slight increase in the values by increasing the time of CuSe deposition. All results obtained for thin films of Cu{sub 3}SbSe{sub 4} suggest that it could be used as an absorber material in a solar cell or thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solution-based spin-coated tin sulfide thin films for photovoltaic and supercapacitor applications

Highlights: • Tin sulfide (SnS{sub x}) thin films were prepared by solution-based spin coating. • The SnS{sub x} films annealed at 500 °C exhibited a pure SnS phase. • The films exhibited direct band gap of 1.4 eV which is near to solar maximum. • The films with the pure SnS phase exhibited a specific capacitance of 42 F g{sup ―1}. - Abstract: In this study, tin sulfide (SnS{sub x}) thin films were prepared using a solution-based spin-coating method. The annealing temperature was observed to play a dominant role in determining the phase, crystallinity, and morphology of the SnS{sub x} thin films. The results obtained from X-ray diffraction, as well as optical and electrical measurements, revealed that the films annealed at 500 °C exhibit a pure SnS phase, with a carrier concentration and direct band gap of ∼10{sup 12} and 1.4 eV, respectively. To explore the applications of SnS in supercapacitors, electrochemical measurements were performed in a 0.2 M NaOH solution. The results indicated that films with a pure SnS phase have a high specific capacitance of 42 F g{sup ―1} at a current density of 2 A g{sup ―1}. The synthesized SnS thin films demonstrate potential for applications in electrochemical capacitors and solar cells.

14 SOLAR ENERGY↗

Fabrication and accelerated long-term stability test of asymmetrical hollow fiber-supported thin film oxygen separation membrane

Asymmetrical hollow fiber-supported thin film membrane may provide microstructural advantages for air separation and oxygen production. The fabrication of such a membrane is usually very difficult, particularly the sintering behaviors and thermal expansion coefficient (TEC) mismatch among multiple layers. This directly affects the reliability and long-term stability of the membrane. Here, in this research, the sintering behaviors of a set of simple oxides are systematically studied and ZnO is identified as a material component for composite substrate La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF)-ZnO. The LSCF-ZnO ratios are further optimized by trading off several factors, e.g., matching the sintering behaviors and TECs of the LSCF-ZnO composite with those of LSCF thin film separation layer while enhancing the substrate strength. With the identified LSCF-ZnO ratio, the LSCF-ZnO composite hollow fiber substrate precursor is formed through slurry spinning process with porous microstructure being formed via phase inversion process. The thin film LSCF dense separation layer is then dip-coated on the substrate followed by co-sintering process. A thin, porous PrBaCo(Fe 0.6 Zr 0.2 Y 0.2 )O 5+δ (PBCFZY) catalyst layer is fabricated on the dense LSCF separation layer with dip-coating and sintering process, forming an asymmetrical membrane device LSCF-ZnO/LSCF/PBCFZY. Oxygen permeation test of the device is systematically conducted, and the fundamental mechanisms are analyzed. An accelerated long-term stability test of the membrane is also conducted (~550h, 46 thermal cycling loads), demonstrating excellent robustness and durability. The device is characterized and analyzed before and after the test. By replacing a considerable amount of high cost LSCF with low cost ZnO in the substrate, it not only enhances the stability but also reduces the capital cost of the membrane for practical applications.

42 ENGINEERING↗

Development of thin-gap GEM- μ RWELL hybrid detectors

Micro Pattern Gaseous Detectors (MPGDs) are used for tracking in High Energy Physics and Nuclear Physics because of their large area, excellent spatial resolution capabilities and low cost. However, for high energy charged particles impacting at a large angle with respect to the axis perpendicular to detector plane, the spatial resolution degrades significantly because of the long trail of ionization charges produced in clusters all along the track in the drift region of the detector. The long ionization charge trail results in registering hits from large number of strips in the readout plane which makes it challenging to precisely reconstruct the particle’s position using simple center of gravity algorithm. As a result, the larger the drift gap, the more severe the deterioration of spatial resolution for inclined tracks. For the same reason, the position resolution is also severely degraded in a large magnetic field, where the Lorentz E x B effect causes the ionization charges to follow a curved and longer path in the detector gas volume. In this paper, we report on the development of thin-gap MPGDs as a way to maintain excellent spatial resolution capabilities of MPGD detectors over a wide angular range of incoming particles. In a thin-gap MPGD, the thickness of the gas volume in the drift region is reduced from typically 3 mm to 1 mm or less. We present preliminary test beam results demonstrating the improvement in spatial resolution from 400 m with a standard 3 mm gap μ RWELL prototype to ~140 μ m with a double amplification GEM- μ RWELL thin-gap hybrid detector. Here, we also discuss the impact of a thin-gap drift volume on other aspects of the performance of MPGD technologies such as the efficiency and detector stability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Exploring the structural uniformity and integrity of protonic ceramic thin film electrolyte using wet powder spraying

Thin protonic ceramic electrolyte contributes to lower ohmic resistance and enhances electrochemical performance of protonic ceramic electrochemical cells. However, manufacturing of large-scale thin electrolyte remains a challenge. Wet powder spraying is an attractive technique to deposit <10 µm thin electrolyte when advanced atomizing techniques and optimized spraying process are integrated. Here ultrasonic atomization is integrated in the wet powder spray technique to reduce the thickness of electrolyte. Moreover, a parametric study is conducted to optimize the wet powder spray process to deposit uniform and crack-free electrolyte film. It is illustrated that tuning of solid loading rates and spray passes can affect the morphology of the as-sprayed electrolyte film, enabling the structural compactness of the sintered electrolyte layer. To maintain chemical stability of the electrolyte layer during sintering, effect of sintering temperature is further investigated to produce a physically thin, structurally dense, and chemically homogeneous electrolyte layer. The protonic ceramic electrochemical cells fabricated with optimized spraying and sintering parameters demonstrate excellent performance under both fuel cell and electrolysis modes. In addition, the cells exhibit remarkable structural integrity during redox and long-term stability tests.

36 MATERIALS SCIENCE↗

Direct glycerol fuel cell with polytetrafluoroethylene (PTFE) thin film separator

Here, anion-exchange membrane-based direct glycerol fuel cells (AEM-DGFCs) can yield high power density, however challenges exist in developing chemically stable AEMs. Here, we demonstrate a porous PTFE thin film, a well-known chemical, electro-chemical, and thermal robust material that can serve as a separator between anode and cathode, thus achieving high DGFC’s performance. A simple aqueous-phase reduction method was used to prepare carbon nanotube supported PdAg nanoparticles (PdAg/CNT) with an average particle size of 2.9 nm. A DGFC using a PTFE thin film without any further modification with PdAg/CNT anode catalyst exhibits a peak power density of 214.7 mW cm –2 at 80 °C, about 22.6% lower than a DGFC using a state-of-the-art AEM. We report a 5.8% decrease and 11.1% decrease in cell voltage for a PTFE thin film and AEM; similarly, the cell voltage degradation rate decreases from 1.2 to 0.8 mV h –1 for PTFE thin film, while for AEM, it decreases from 9.6 to 3.0 mV h –1 over an 80 h durability test period. Transmission electron microscopy results indicate that the average particle size of PdAg/CNT increases from 2.9 to 3.7 nm after 80 h discharge; this suggests that PdAg particle growth may be the main reason for the performance drop.

30 DIRECT ENERGY CONVERSION↗

Controlling shape memory effects in NiTi thin films grown on Ru seed layer

NiTi thin films with robust shape memory effects and low deposition temperatures are greatly desired for microelectronic devices. However, sub-micron films deposited below 425 °C usually have amorphous structure and must be post-annealed to achieve full crystallization. In this article, using Ru as a seed layer, we demonstrate growth of NiTi films as thin as 120 nm with in-situ crystallization at 325 °C. NiTi thin films with a wide range of growth parameters including deposition temperature and film thickness were investigated. Shape memory effects were characterized using stress bow and resistivity studies. Structural information across the R-phase to austenite transformation was obtained using X-ray diffraction. NiTi thin films exhibited a narrow hysteresis during R-phase to austenite phase transition near 60 °C while possessing good shape memory properties.

36 MATERIALS SCIENCE↗

Theoretical Analysis of Effects of Deep Level, Back Contact, and Absorber Thickness on Capacitance-Voltage Profiling of CdTe Thin-Film Solar Cells

The apparent carrier density profile measured by the capacitance-voltage technique in CdTe thin-film solar cells frequently displays a distinctive U-shape. We show that, even assuming a uniform carrier density, such a U-shape may arise from deep levels, a non-ohmic back-contact, and a thin absorber, which are commonly present in practical CdTe thin-film solar cells. A thin CdTe absorber contributes to the right branch of the U-shape due to a punch-through effect at reverse or zero biases, when the CdTe absorber is nearly fully depleted. A rectifying back-contact contributes to both branches of the U-shape due to voltage sharing with the front junction under a forward bias and early punch-through under a reverse bias. Deep levels contribute to the right branch, but also raise the bottom of the U-shape, leading to an overestimate of carrier density.

14 SOLAR ENERGY↗

High-temperature chemical expansion of Pr0.1Ce0.9O2-δ thin films determined by Differential Laser Doppler Vibrometry

The chemical expansion of thin-film praseodymium-cerium oxide solid solutions (Pr 0.1 Ce 0.9 O 2-δ , PCO10) is investigated at temperatures ranging from 500 °C to 800 °C and oxygen activities down to about 10 -22 . Differential Laser Doppler Vibrometry (D-LDV) in combination with periodic electrochemical pumping of oxygen is used to detect very small displacements of the sample surface. With decreasing pumping frequency, the film approaches chemical equilibrium, which is nearly reached at 700 °C below 0.01 Hz. D-LDV enables direct measurement of film thickness changes as well as the bending of the underlying substrates due electrochemically induced lateral mechanical stress. The substrate bending is found to be more than an order of magnitude larger than the film thickness change, increasing the detection limit by the same factor. The thickness change of the thin film is calculated from the measured displacement of the sample surface and compared with directly measured values. Thin-film literature data available for low oxygen activities up to 650 °C agree with our measurements. In addition, the thickness change of the film is determined from the displacement at different sample positions, which validates previous measurements. Finally, thin film chemical expansion is found to be larger by a factor of about 2 than the corresponding bulk value in agreement with predictions from a mechanical model that the out-of-plane expansion of a constrained film is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site-specific plan-view (S)TEM sample preparation from thin films using a dual-beam FIB-SEM

To fully evaluate the atomic structure, and associated properties of materials using transmission electron microscopy, examination of samples from three non-collinear orientations is needed. This is particularly challenging for thin films and nanoscale devices built on substrates due to limitations with plan-view sample preparation. In this work, a new method for preparation of high-quality, site-specific, plan-view TEM samples from thin-films grown on substrates, is presented and discussed. Here, it is based on using a dual-beam focused ion beam scanning electron microscope (FIB-SEM) system. To demonstrate the method, the samples were prepared from thin films of perovskite oxide BaSnO 3 grown on a SrTiO 3 substrate and metal oxide IrO 2 on a TiO 2 substrate, ranging from 20–80 nm in thicknesses using molecular beam epitaxy. While the method is optimized for the thin films, it can be extended to other site-specific plan-view samples and devices build on wafers. Aberration-corrected STEM was used to evaluate the quality of the samples and their applicability for atomic-resolution imaging and analysis.

BaSnO3↗

Additive manufacturing for electrocaloric terpolymer thin films

Current heating, venting, and air conditioning (HVAC) systems have drawbacks of high energy consumption, large CO 2 emissions, and low efficiency. Electrocaloric (EC) cycles present an eco-friendly alternative by converting thermal energy to electrical energy. Defect-free thin films with uniform thickness are required to achieve optimal EC performance. A scalable thin film fabrication process is essential for integrating EC cycles into HVAC systems. This study introduces EC thin films prepared by electrospray (ES) processing, a manufacturing method that deposits EC polymer layer by layer using high voltage. The resulting films show superior thickness control, smoother surfaces, and improved thermal and electrical properties compared with solution casting. In addition, post-annealing at 120°C enhances the thermal and EC performance, with films achieving a temperature change (ΔT) of 3.6°C at 100 MV/m when tested near room temperature. With the potential for future scalability, the ES method offers a promising approach for fabricating EC thin films.

36 MATERIALS SCIENCE↗

Mesoporous Thin Film Architectures: Addressing Material Demands through Molecular Self-Assembly

Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems.

oxides↗