Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulation code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Impact of Misclassification Rates on Compression Efficiency of Red Blood Cell Images of Malaria Infection Using Deep Learning

Malaria is a severe public health problem worldwide, with some developing countries being most affected. Reliable remote diagnosis of malaria infection will benefit from efficient compression of high-resolution microscopic images. This paper addresses a lossless compression of malaria-infected red blood cell images using deep learning. Specifically, we investigate a practical approach where images are first classified before being compressed using stacked autoencoders. We provide probabilistic analysis on the impact of misclassification rates on compression performance in terms of the information-theoretic measure of entropy. We then use malaria infection image datasets to evaluate the relations between misclassification rates and actually obtainable compressed bit rates using Golomb–Rice codes. Simulation results show that the joint pattern classification/compression method provides more efficient compression than several mainstream lossless compression techniques, such as JPEG2000, JPEG-LS, CALIC, and WebP, by exploiting common features extracted by deep learning on large datasets. This study provides new insight into the interplay between classification accuracy and compression bitrates. The proposed compression method can find useful telemedicine applications where efficient storage and rapid transfer of large image datasets is desirable.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling the Auto-Ignition of Biodiesel Blends with a Multi-Step Model

There is growing interest in using biodiesel in place of or in blends with petrodiesel in diesel engines; however, biodiesel oxidation chemistry is complicated to directly model and existing surrogate kinetic models are very large, making them computationally expensive. The present study describes a method for predicting the ignition behavior of blends of n-heptane and methyl butanoate, fuels whose blends have been used in the past as a surrogate for biodiesel. The autoignition is predicted using a multistep (8-step) model in order to reduce computational time and make this a viable tool for implementation into engine simulation codes. A detailed reaction mechanism for n-heptane-methyl butanoate blends was used as a basis for validating the multistep model results. The ignition delay trends predicted by the multistep model for the n-heptane-methyl butanoate blends matched well with that of the detailed CHEMKIN model for the majority of conditions tested.

33 ADVANCED PROPULSION SYSTEMS↗

Analyzing large data sets from XGC1 magnetic fusion simulations using apache spark

Apache Spark is explored as a tool for analyzing large data sets from the magnetic fusion simulation code XGCI. Implementation details of Apache Spark on the NERSC Edison supercomputer are discussed, including binary file reading, and parameter setup. Here, an unsupervised machine learning algorithm, k-means clustering, is applied to XGCI particle distribution function data, showing that highly turbulent spatial regions do not have common coherent structures, but rather broad, ring-like structures in velocity space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visualizing expanding warm dense matter heated by laser-generated ion beams

This PowerPoint presentation concluded with the following. We calculated the expected heating per atom and temperatures of various target materials using a Monte Carlo simulation code and SESAME EOS tables. We used aluminum ion beams to heat gold and diamond uniformly and isochorically. A streak camera imaged the expansion of warm dense gold (5.5 eV) and diamond (1.7 eV). GXI-X recorded all 16 x-ray images of the unheated gold bar targets proving that it could image the motion of the gold/diamond interface of the proposed target.

36 MATERIALS SCIENCE↗

PEBBLES Mechanics Simulation Speedup

Pebble bed reactors contain large numbers of spherical fuel elements arranged randomly. Determining the motion and location of these fuel elements is required for calculating certain parameters of pebble bed reactor operation. These simulations involve hundreds of thousands of pebbles and involve determining the entire core motion as pebbles are recirculated. Single processor algorithms for this are insufficient since they would take decades to centuries of wall-clock time. This paper describes the process of parallelizing and speeding up the PEBBLES pebble mechanics simulation code. Both shared memory programming with the Open Multi-Processing API and distributed memory programming with the Message Passing Interface API are used in simultaneously in this process. A new shared memory lock-less linear time collision detection algorithm is described. This method allows faster detection of pebbles in contact than generic methods. These combine to make full recirculations on AVR sized reactors possible in months of wall clock time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A conservative scheme of drift kinetic electrons for gyrokinetic simulation of kinetic-MHD processes in toroidal plasmas

A conservative scheme of drift kinetic electrons for gyrokinetic simulations of kinetic-magnetohydrodynamic processes in toroidal plasmas has been formulated and verified. Both vector potential and electron perturbed distribution function are decomposed into adiabatic part with analytic solution and non-adiabatic part solved numerically. The adiabatic parallel electric field is solved directly from the electron adiabatic response, resulting in a high degree of accuracy. Here, the consistency between electrostatic potential and parallel vector potential is enforced by using the electron continuity equation. Since particles are only used to calculate the non-adiabatic response, which is used to calculate the non-adiabatic vector potential through Ohm's law, the conservative scheme minimizes the electron particle noise and mitigates the cancellation problem. Linear dispersion relations of the kinetic Alfvén wave and the collisionless tearing mode in cylindrical geometry have been verified in gyrokinetic toroidal code simulations, which show that the perpendicular grid size can be larger than the electron collisionless skin depth when the mode wavelength is longer than the electron skin depth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new radiation stripline ICRF antenna design for EAST Tokamak

A new type of toroidal long Radiation Stripline Antenna (RSA) is presented, which can effectively improve antenna radiation, leading in reduction of max voltage on transmission line and decrease of the sensitivity to ELM's of the ICRF system at some frequencies. Based on the new concept, a 4-straps RSA is proposed for EAST device. Using 3-D computing simulator code (HFSS), RF current distribution, S-parameters and electromagnetic field distribution on and near the RSA ICRF antenna are analyzed and compared with present ICRF antenna on EAST.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Trinity Supercomputer Now Fully Operational

Now one of the fastest supercomputers in the United States, the Trinity Supercomputer Phase II project was completed during the summer of 2017, and the computer became fully operational during an unclassified “open science” run. The computer has now transitioned to classified mode. The Trinity supercomputer is designed to provide increased computational capability for the NNSA Nuclear Security Enterprise in support of increasing geometric and physics fidelities in nuclear weapons simulation codes, while maintaining expectations for total time to solution. The capabilities of Trinity are required for supporting the NNSA Stockpile Stewardship program’s certification and assessments to ensure that the nation’s nuclear stockpile is safe, secure and effective. With an expected operational lifetime through 2020, Trinity is an approximately 41.5 petaflop (41.5 million billion calculations per second, peak performance) supercomputer based on the Cray XC40 architecture. It consists of 19,420 compute nodes utilizing two processor architectures, Intel Xeon Haswell and Intel Xeon Phi Knights Landing. It is a water-cooled system with a power requirement of about 10 megawatts. The Trinity project is managed and operated by Los Alamos National Laboratory and Sandia National Laboratories under the Alliance for Computing at Extreme Scale (ACES) partnership. The system is located at the Nicholas Metropolis Center for Modeling and Simulation at Los Alamos and covers approximately 5,200 square feet of floor space.

97 MATHEMATICS AND COMPUTING↗

tinyIFD: A High-Throughput Binding Pose Refinement Workflow Through Induced-Fit Ligand Docking

A critical step in structure-based drug discovery is predicting whether and how a candidate molecule binds to a model of a therapeutic target. However, substantial protein side chain movements prevent current screening methods, such as docking, from accurately predicting the ligand conformations and require expensive refinements to produce viable candidates. Here, we present the development of a high-throughput and flexible ligand pose refinement workflow, called “tinyIFD”. The main features of the workflow include the use of specialized high-throughput, small-system MD simulation code mdgx.cuda and an actively learning model zoo approach. We show the application of this workflow on a large test set of diverse protein targets, achieving 66% and 76% success rates for finding a crystal-like pose within the top-2 and top-5 poses, respectively. We also applied this workflow to the SARS-CoV-2 main protease (M pro ) inhibitors, where we demonstrate the benefit of the active learning aspect in this workflow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydro-scaling of direct-drive cylindrical implosions at the OMEGA and the National Ignition Facility

Deceleration-phase Rayleigh–Taylor instability (RTI) growth during inertial confinement fusion capsule implosions significantly affects the performance as it mixes cold ablator material into the fuel. Precise measurements of such instability growth are essential for both validating the existing simulation codes and improving our predictive capability. RTI measurements on the inner surface of a spherical shell are limited and are often inferred indirectly at limited convergence. In contrast, cylindrical implosions allow for direct diagnostic access to the converging interface by imaging down the cylinder axis while retaining the effects of convergence. We have performed direct-drive cylindrical implosion experiments at both the OMEGA and the NIF laser facilities using scaled targets. RTI growth is demonstrated to be scale-invariant between the cylindrical targets at OMEGA and similar targets at the NIF, which are scaled up by a factor of three in the radial dimension. Single-mode (m = 0) instability growth factors of ~14 are measured at a convergence ratio (CR) ~ 2.5 with nearly identical mode growth at both scales. The measurements are in agreement with xRAGE radiation-hydrodynamics simulations. In addition, we have developed the Bayesian-inference-engine method to account for the variations in the target alignment, magnification, and the parallax effect in the measurement, allowing a more precise comparison between the experimental data and the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dark matter directional detection: comparison of the track direction determination

Several directional techniques have been proposed for a directional detection of Dark matter, among others anisotropic crystal detectors, nuclear emulsion plates, and low-pressure gaseous TPCs. The key point is to get access to the initial direction of the nucleus recoiling due to the elastic scattering by a WIMP. In this article, we aim at estimating, for each method, how the information of the recoil track initial direction is preserved in different detector materials. We use the SRIM simulation code to emulate the motion of the first recoiling nucleus in each material. We propose the use of a new observable, D , to quantify the preservation of the initial direction of the recoiling nucleus in the detector. We show that in an emulsion mix and an anisotropic crystal, the initial direction is lost very early, while in a typical TPC gas mix, the direction is well preserved.

79 ASTRONOMY AND ASTROPHYSICS↗

A Component-Based Framework for Smoothed Particle Hydrodynamics Simulations of Reactive Fluid Flow in Porous Media.

The development of a framework to support smoothed particle hydrodynamics (SPH) simulations of fluid flow and transport in porous media is described. The framework is built using the Common Component Architecture (CCA) toolkit and supports SPH simulations using a variety of different SPH models and setup formats. The SPH simulation code is decomposed into independent components that represent self-contained units of functionality. Different physics models can be developed within the framework by re-implementing key components but no modification of other components is required. The model for defining components and developing abstract interfaces for them that support a high degree of modularity and minimal dependencies between components is discussed in detail.

99 GENERAL AND MISCELLANEOUS↗

User Guidelines and Best Practices for CASL VUQ Analysis Using Dakota

In general, Dakota is the Consortium for Advanced Simulation of Light Water Reactors (CASL) delivery vehicle for verification, validation, and uncertainty quantification (VUQ) algorithms. It permits ready application of the VUQ methods described above to simulation codes by CASL researchers, code developers, and application engineers. More specifically, the CASL VUQ Strategy [33] prescribes the use of Predictive Capability Maturity Model (PCMM) assessments [37]. PCMM is an expert elicitation tool designed to characterize and communicate completeness of the approaches used for computational model definition, verification, validation, and uncertainty quantification associated with an intended application. Exercising a computational model with the methods in Dakota will yield, in part, evidence for a predictive capability maturity model (PCMM) assessment. Table 1.1 summarizes some key predictive maturity related activities (see details in [33]), with examples of how Dakota fits in. This manual offers CASL partners a guide to conducting Dakota-based VUQ studies for CASL problems. It motivates various classes of Dakota methods and includes examples of their use on representative application problems. On reading, a CASL analyst should understand why and how to apply Dakota to a simulation problem.

97 MATHEMATICS AND COMPUTING↗

High Resolution Simulation of Beam Dynamics in Electron Linacs for Free Electron Lasers

In this paper we report on large scale multi-physics simulation of beam dynamics in electron linacs for next generation free electron lasers (FELs). We describe key features of a parallel macroparticle simulation code including three-dimensional (3D) space-charge effects, short-range structure wake fields, longitudinal coherent synchrotron radiation (CSR) wake fields, and treatment of radiofrequency (RF) accelerating cavities using maps obtained from axial field profiles. A macroparticle up-sampling scheme is described that reduces the shot noise from an initial distribution with a smaller number of macroparticles while maintaining the global properties of the original distribution. We present a study of the microbunching instability which is a critical issue for future FELs due to its impact on beam quality at the end of the linac. Using parameters of a planned FEL linac at Lawrence Berkeley National Laboratory (LBNL), we show that a large number of macroparticles (beyond 100 million) is needed to control numerical shot noise that drives the microbunching instability. We also explore the effect of the longitudinal grid on simulation results. We show that acceptable results are obtained with around 2048 longitudinal grid points, and we discuss this in view of the spectral growth rate predicted from linear theory. As an application, we present results from simulations using one billion macroparticles of the FEL linac under design at LBNL. We show that the final uncorrelated energy spread of the beam depends not only on the initial uncorrelated energy spread but also depends strongly on the shape of the initial current profile. By using a parabolic initial current profile, 5 keV initial uncorrelated energy spread at 40 MeV injection energy, and improved linac design, those simulations demonstrate that a reasonable beam quality can be achieved at the end of the linac, with the final distribution having about 100 keV energy spread, 2.4 GeV energy, and 1.2 kA peak current.

43 PARTICLE ACCELERATORS↗

Dimensionality reduction for uncertainty quantification of nuclear engineering models.

The task of uncertainty quantification consists of relating the available information on uncertainties in the model setup to the resulting variation in the outputs of the model. Uncertainty quantification plays an important role in complex simulation models of nuclear engineering, where better understanding of uncertainty results in greater confidence in the model and in the improved safety and efficiency of engineering projects. In our previous work, we have shown that the effect of uncertainty can be approximated by polynomial regression with derivatives (PRD): a hybrid regression method that uses first-order derivatives of the model output as additional fitting conditions for a polynomial expansion. Numerical experiments have demonstrated the advantage of this approach over classical methods of uncertainty analysis: in precision, computational efficiency, or both. To obtain derivatives, we used automatic differentiation (AD) on the simulation code; hand-coded derivatives are acceptable for simpler models. We now present improvements on the method. We use a tuned version of the method of snapshots, a technique based on proper orthogonal decomposition (POD), to set up the reduced order representation of essential information on uncertainty in the model inputs. The automatically obtained sensitivity information is required to set up the method. Dimensionality reduction in combination with PRD allows analysis on a larger dimension of the uncertainty space (>100), at modest computational cost.

42 ENGINEERING↗

Memory-efficient optimization of Gyrokinetic particle-to-grid interpolation for multicore processors

We present multicore parallelization strategies for the particle-to-grid interpolation step in the Gyrokinetic Toroidal Code (GTC), a 3D particle-in-cell (PIC) application to study turbulent transport in magnetic-confinement fusion devices. Particle-grid interpolation is a known performance bottleneck in several PIC applications. In GTC, this step involves particles depositing charges to a 3D toroidal mesh, and multiple particles may contribute to the charge at a grid point. We design new parallel algorithms for the GTC charge deposition kernel, and analyze their performance on three leading multicore platforms. We implement thirteen different variants for this kernel and identify the best-performing ones given typical PIC parameters such as the grid size, number of particles per cell, and the GTC-specific particle Larmor radius variation. We find that our best strategies can be 2x faster than the reference optimized MPI implementation, and our analysis provides insight into desirable architectural features for high-performance PIC simulation codes.

97 MATHEMATICS AND COMPUTING↗

DAKOTA Design Analysis Kit for Optimization and Terascale

The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes (computational models) and iterative analysis methods. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and analysis of computational models on high performance computers.A user provides a set of DAKOTA commands in an input file and launches DAKOTA. DAKOTA invokes instances of the computational models, collects their results, and performs systems analyses. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, polynomial chaos, stochastic collocation, and epistemic methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as hybrid optimization, surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. Services for parallel computing, simulation interfacing, approximation modeling, fault tolerance, restart, and graphics are also included.

SciDAC↗

Ultra-wideband coaxial hybrid coupler for load resilient ion cyclotron range of frequency heating at fusion plasmas

We designed a high power and ultra-wideband two-section 3 dB coaxial hybrid coupler for load resilient ion cyclotron range of frequency heating by configuring asymmetric impedance matching using a three-dimensional simulation code, hfss. By adjusting the characteristic impedances of main and coupled lines of the hybrid coupler, we realized that the bandwidth of the proposed circuit is not only wider than that of a conventional three-section coupler, but also that the bandwidth is almost twice as wide compared to the conventional two-section hybrid coupler while maintaining the identical overall size.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗