Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “science data processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Data compression for data archival, browse or quick-look

Soon after space and Earth science data is collected, it is stored in one or more archival facilities for later retrieval and analysis. Since the purpose of the archival process is to keep an accurate and complete record of data, any data compression used in an archival system must be lossless, and protect against propagation of error in the storage media. A browse capability for space and Earth science data is needed to enable scientists to check the appropriateness and quality of particular data sets before obtaining the full data set(s) for detailed analysis. Browse data produced for these purposes could be used to facilitate the retrieval of data from an archival facility. Quick-look data is data obtained directly from the sensor for either previewing the data or for an application that requires very timely analysis of the space or Earth science data. Two main differences between data compression techniques appropriate to browse and quick-look cases, are that quick-look can be more specifically tailored, and it must be limited in complexity by the relatively limited computational power available on space platforms.

Dozier, Jeff↗
NASA NTRS2024

Improved Soil Moisture Estimation and Detection of Irrigation Signal By Incorporating SMAP Soil Moisture Into the Indian Land Data Assimilation System (ILDAS)

Land surface models have facilitated the estimation of soil moisture over a range of spatiotemporal scales. However, limitations in model parameterization and under-representation of anthropogenic processes restrict their ability to estimate local-scale soil moisture variability, especially over irrigated areas. Assimilation of satellite-based soil moisture retrievals into land surface models can be a viable approach to overcome these constraints, specially over highly irrigated countries such as India, where such applications are rare. Additionally, large-scale validation of modeled soil moisture has been limited over India till now due to lack of a representative station network. By assimilating Soil Moisture Active Passive (SMAP)-based estimates into the state-of-the-art Indian Land Data Assimilation System (ILDAS) and combining with a new soil moisture station network of more than 200 stations, this study demonstrates improved soil moisture estimations and capture of irrigation signals over the region. The Noah-MP land surface model is forced by multiple local and global meteorological datasets and Ensemble Kalman Filter (EnKF) is used for assimilation of soil moisture. Comparison of open-loop and data assimilated soil moisture against station soil moisture data shows relative spatial mean improvement of 0.0178 in correlation and 0.0029 m3/m3 in RMSE. Further statistical comparison with in-situ data has also shown better results over most of the stations, as evident from improved correlations and reduced unbiased RMSE after assimilation. Finally, the climatology of soil moisture over the different irrigation fractions reveals that data assimilated outputs over irrigated grid cells tend to have higher soil moisture during dry winter season, demonstrating the ability to capture irrigation signals. These findings quantify the value of data assimilation in improving soil moisture estimates and the ability to capture unmodeled processes such as irrigation, which lays the science groundwork for upcoming space missions such as NASA ISRO Synthetic Aperture Radar (NISAR).

Soil Moisture↗
NASA NTRS2013

Shuttle Topography Data Inform Solar Power Analysis

The next time you flip on a light switch, there s a chance that you could be benefitting from data originally acquired during the Space Shuttle Program. An effort spearheaded by Jet Propulsion Laboratory (JPL) and the National Geospatial-Intelligence Agency (NGA) in 2000 put together the first near-global elevation map of the Earth ever assembled, which has found use in everything from 3D terrain maps to models that inform solar power production. For the project, called the Shuttle Radar Topography Mission (SRTM), engineers at JPL designed a 60-meter mast that was fitted onto Shuttle Endeavour. Once deployed in space, an antenna attached to the end of the mast worked in combination with another antenna on the shuttle to simultaneously collect data from two perspectives. Just as having two eyes makes depth perception possible, the SRTM data sets could be combined to form an accurate picture of the Earth s surface elevations, the first hight-detail, near-global elevation map ever assembled. What made SRTM unique was not just its surface mapping capabilities but the completeness of the data it acquired. Over the course of 11 days, the shuttle orbited the Earth nearly 180 times, covering everything between the 60deg north and 54deg south latitudes, or roughly 80 percent of the world s total landmass. Of that targeted land area, 95 percent was mapped at least twice, and 24 percent was mapped at least four times. Following several years of processing, NASA released the data to the public in partnership with NGA. Robert Crippen, a member of the SRTM science team, says that the data have proven useful in a variety of fields. "Satellites have produced vast amounts of remote sensing data, which over the years have been mostly two-dimensional. But the Earth s surface is three-dimensional. Detailed topographic data give us the means to visualize and analyze remote sensing data in their natural three-dimensional structure, facilitating a greater understanding of the features and processes taking place on Earth."

Source record↗
DOE OSTI2015

Improving Neutron Measurement Capabilities; Expanding the Limits of Correlated Neutron Counting

A number of technical and practical limitations exist within the neutron correlated counting techniques used in safeguards, especially within the algorithms that are used to process and analyze the detected neutron signals. A multi-laboratory effort is underway to develop new and improved analysis and data processing algorithms based on fundamental physics principles to extract additional or more accurate information about nuclear material bearing items.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Improving microstructures segmentation via pretraining with synthetic data

Image analysis of material microstructures through microscopy is an integral capability in the field of materials science. The topological and chemical information obtained through microscopy allow us to draw vital connections between material microstructures, properties, and processing. While scanning electron microscopy (SEM) is able to yield a considerable wealth of information interpretable by the intuition of experts, there has been considerable interest in using machine learning, convolutional neural networks (CNNs) in particular, for such image analysis task. Training CNNs for an image analysis task requires a large annotated dataset. However, in many materials science applications, obtaining a large annotated dataset is cost and labor intensive. In this work, we study the use of synthetic data to enlarge the available annotated experimental data of uranium oxide. We utilize a modified Potts model to simulate uranium oxide particles with morphologies similar to those observed experimentally. We then leverage an image-to-image translation model to synthesize the simulated particles as if they are acquired with SEM. Through this process, we obtain pairs of particle images and their corresponding SEM representations, which corresponds to pairs of annotations and images. Unlike previous works, we leverage synthetic data for pretraining a CNN model prior, and finetune that model further with experimental data. We experimentally demonstrate that using synthetic data as incremental learning process benefits the overall performance compared to training a model on combined synthetic and experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Long-term hydrological, biogeochemical, and climatological data from Walker Branch Watershed, East Tennessee, USA

In 1967, the original Walker Branch Watershed (WBW) project was established to study elemental cycling and mass balances in a relatively unimpacted watershed. Over the next 50+ years, findings from additional experimental studies and long-term observations on WBW advanced understanding of catchment hydrology, biogeochemistry, and ecology and established WBW as a seminal site for catchment science. The 97.5-ha WBW is located in East Tennessee, USA, on the U.S. Department of Energy's Oak Ridge Reservation. Vegetation on the watershed is characteristic of an eastern deciduous, second-growth forest. The watershed is divided into two subcatchments: the West Fork (38.4 ha) and the East Fork (59.1 ha). Headwater streams draining these subcatchments are fed by multiple springs, and thus flow is perennial. Stream water is high in base cations due to weathering of dolomite bedrock and nutrient concentrations are low. Long-term observations of climate, hydrology, and biogeochemistry include daily (1969–2014) and 15-min (1994–2014) stream discharge and annual runoff (1969–2014); hourly, daily, and annual rainfall (1969–2012); daily climate and soil temperature (1993–2010); and weekly stream water chemistry (1989–2013). These long-term datasets are publicly available on the WBW website (https://walkerbranch.ornl.gov/long-term-data/). While collection of these data has ceased, related long-term measurements continue through the National Ecological Observatory Network (NEON), where WBW is the core terrestrial and aquatic site in the Appalachian and Cumberland Plateau region (NEON's Domain 7) of the United States. These long-term datasets have been and will continue to be important in evaluating the influence of climatic and environmental drivers on catchment processes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2001

ICESat (GLAS) Science Processing Software Document Series: GLAS Science Software Requirements Document - Volume 3

This document addresses the software requirements of the Geoscience Laser Altimeter System (GLAS) Standard Data Software (SDS) supporting the GLAS instrument on the EOS ICESat Spacecraft. This Software Requirements Document represents the initial collection of the technical engineering information for the GLAS SDS. This information is detailed within the second of four main volumes of the Standard documentation, the Product Specification volume. This document is a "roll-out" from the governing volume outline containing the Concept and Requirements sections.

Jester, Peggy L.↗
NASA NTRS2019

Planetary Boundary Layer Height from AIRS and MERRA-2 Products at NASA GES DISC, and Insights from Data Intercomparison

The Atmospheric Infrared Sounder (AIRS) is the hyperspectral infrared sounder onboard NASA's Aqua satellite, launched in 2002. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), in collaboration with NASA Sounder Team at JPL, provides processing, archiving, and distribution services for NASA sounders: the Aqua AIRS mission and the subsequent Suomi-National Polar-orbiting Partnership Cross-track Infrared Sounder (CrIS) mission. The Planetary Boundary Layer (PBL) Height is a new variable added in the AIRS Version 6 support product. It is derived based on gradients of the retrieved atmospheric thermodynamic profile, and gives the pressure at the top of PBL over the ocean. The GES DISC also provides services for the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) product generated by the Goddard Earth Observing System Model, Version 5 (GEOS-5) data assimilation system. The monthly PBL Height variable has been available in the Giovanni system, which is a Web-based application developed by the GES DISC providing a simple and intuitive way to visualize, analyze, and access vast amounts of Earth science remote sensing data. In this work, we will present the monthly PBL Height data from AIRS and MERRA-2 and the services to support data intercomparison, such as access, plotting, subsetting, re-gridding, and generation of a multi-year monthly mean. We will also show intercomparison results, and evaluate whether (over the ocean) AIRS can observe PBL features similar to the reanalysis product at monthly and longer-term scales.

AIRS↗
NASA NTRS2008

The NPOESS Preparatory Project (NPP) Science Data Segment (SDS) Data Depository and Distribution Element (SD3E) System Architecture

The National Polar-orbiting Operational Environmental Satellite System (NPOESS), the U.S. Government's future low-Earth orbiting satellite system, will monitor global weather and environmental conditions. Serving as a risk reduction for NPOESS, the NPOESS Preparatory Project (NPP) will provide remotely sensed atmospheric, land, ocean, ozone, and sounder data that will serve the meteorological and global climate change scientific communities. The National Aeronautics and Space Administration (NASA) NPP Science Data Segment's (SDS) primary role is to independently assess the quality of the NPP science and environmental data records for their ability to support climate research. The SDS is composed of nine elements; an input element that receives data from the operational agencies and acts as a buffer, a calibration analysis element, five elements devoted to measurement based quality assessment, an element used to test algorithmic improvements, and an element that provides overall science direction. Each element requires a set of sensor specific science data products for their evaluation. There are four NPP sensors that will be flown on the NPP observatory. They are the Visible Infrared Imagining Radiometer Suite (VIIRS), the Advanced Technology Microwave Sounder (ATMS), the Cross-Track Infrared Sounder (CrIS), and the Ozone Mapper/Profiler Suite (OMPS). It is estimated that these four sensors combined will make daily data requests for approximately six terabytes of NPP science products from the operational data providers. As a result, issues associated with duplicate data requests, data transfers of large volumes of diverse products, and data transfer failures raised concerns with respect to the network traffic and bandwidth consumption. Therefore, a central data broker system for receiving and buffering data requests and data products for the SDS was developed. The data element for this system is called the SDS Data Depository and Distribution Element (SD3E). It supports science mission data assessment by assuring the timely and validated acquisition and subsequent transfer of the NPP Science Mission data to the SDS Elements and NPP Science Team. The six science elements that interface with the SD3E span across the NASA Goddard Space Flight Center (GSFC), the NASA Jet Propulsion Laboratory (JPL), and the University of Wisconsin. As the primary communication vehicle for the science elements and science team, the SD3E has an interface to the operational data providers: National Environment Satellite, Data, and Information Service (NESDIS) Interface Data Processing System (IDPS) and the National Oceanic Atmospheric Administration's (NOAA) Comprehensive Large Array-data Stewardship system (CLASS) Archive Data System (ADS), that are responsible for product generation and archive and distribution respectively. The SD3E is designed to be a semi-customizable and semi-automated system. This system is designed to provide flexibility and ease of use for the science users in accessing the latest data products by creating a rolling data cache that temporarily stores the products locally before transferring the data to the SDS Measurement based elements for the land, ocean, atmosphere, sounder, and ozone. This paper describes the design and architecture of one of the nine SDS elements, the SD3E, and how this system has provided a mechanism for efficient data exchange, how it has helped in alleviating some of the network traffic and usage, and how it has contributed to reducing operational costs.

Ho, Evelyn L.↗
NASA NTRS2015

SRT Status and Plans for Version-7

The AIRS Science Team Version-6 retrieval algorithm is currently producing level-3 Climate Data Records (CDRs) from AIRS that have been proven useful to scientists in understanding climate processes. CDRs are gridded level-3 products which include all cases passing AIRS Climate QC. SRT has made significant further improvements to AIRS Version-6. Research is continuing at SRT toward the development of AIRS Version-7. At the last Science Team Meeting, we described results using SRT AIRS Version-6.19. SRT Version-6.19 is now an official build at JPL called 6.2. SRTs latest version is AIRS Version-6.22. We have also adapted AIRS Version-6.22 to run with CrISATMS. AIRS Version-6.22 and CrIS Version- 6.22 both run now on JPL computers, but are not yet official builds. The main reason for finalization of Version-7, and using it in the relatively near future for the future processing and reprocessing of old AIRS data, is to produce even better CDRs for use by climate scientists. For this reason all results shown in this talk use only AIRS Climate QC.

CDRs↗
DOE OSTI2021

Reproducibility of protein x-ray diffuse scattering and potential utility for modeling atomic displacement parameters

Protein structure and dynamics can be probed using x-ray crystallography. Whereas the Bragg peaks are only sensitive to the average unit-cell electron density, the signal between the Bragg peaks—diffuse scattering—is sensitive to spatial correlations in electron-density variations. Although diffuse scattering contains valuable information about protein dynamics, the diffuse signal is more difficult to isolate from the background compared to the Bragg signal, and the reproducibility of diffuse signal is not yet well understood. We present a systematic study of the reproducibility of diffuse scattering from isocyanide hydratase in three different protein forms. Both replicate diffuse datasets and datasets obtained from different mutants were similar in pairwise comparisons (Pearson correlation coefficient ≥0.8). The data were processed in a manner inspired by previously published methods using custom software with modular design, enabling us to perform an analysis of various data processing choices to determine how to obtain the highest quality data as assessed using unbiased measures of symmetry and reproducibility. The diffuse data were then used to characterize atomic mobility using a liquid-like motions (LLM) model. This characterization was able to discriminate between distinct anisotropic atomic displacement parameter (ADP) models arising from different anisotropic scaling choices that agreed comparably with the Bragg data. Our results emphasize the importance of data reproducibility as a model-free measure of diffuse data quality, illustrate the ability of LLM analysis of diffuse scattering to select among alternative ADP models, and offer insights into the design of successful diffuse scattering experiments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Big PanDa Workflow Management on Titan for High Energy and Nuclear Physics and for Future Extreme Scale Scientific Application

Over a three year period, from 2016-2019, this project demonstrated the scientific benefits of integrating the Titan supercomputer at Oak Ridge Leadership Computing Facility into traditional high throughput grid based distributed computing systems managed by PanDA, the workflow management system used for the execution of all distributed computing applications by the ATLAS experiment at the Large Hadron Collider. PanDA manages millions of batch jobs daily at hundreds of clusters worldwide on request by thousands of physicist users, and processes more than an exabyte of data annually using grid middleware. High levels of operational use of Titan was sustained by PanDA in order to meet the physics goals of ATLAS. The success of this project led to the use of other supercomputers worldwide by ATLAS, and to the adoption of PanDA by other experiments and other scientists. Multiple innovative operational and computer science research goals were achieved supporting the use of supercomputers for scientific domains with large scale distributed data and distributed processing needs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Toward a Multimodal-Deep Learning Retrieval System for Monitoring Nuclear Proliferation Activities

As the amount of available data increases, the human ability to locate, process, and analyze it is strained and eventually overwhelmed. To address this challenge for nonproliferation analysts, the authors have been creating a large-scale multimodal retrieval system to help analysts triage and search open source science, technology, and news data for indicators of nuclear proliferation capabilities and activities. The system relies on a set of deep neural networks (DNNs) trained to evaluate conceptual similarities across data modalities, such as text, image, and video. These DNNs can be used to search and prioritize data, according to a nuclear fuel cycle (NFC) process template, that are conceptually closest to the seed query items regardless of data modality. The DNNs have been trained to map conceptually related words, sentences, and images to nearby points in a multimodal feature space, enabling intra- and intermodal retrieval via nearest-neighbor calculations to seed query points. The authors evaluate the system’s ability to retrieve NFC-related data that have been purposely hidden in collections of unrelated background data. They demonstrate quantitative and qualitative results for text-to-image, image-to-image, and image-to-video retrievals. This paper discusses data challenges confronting nonproliferation analysts, describes the DNNs designed to retrieve multimodal data that are proximal in the semantic space, and demonstrates their effectiveness by applying the DNNs to nonproliferation-specific multimodal data sets.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Building near-real-time processing pipelines with the spark-MPI platform

Advances in detectors and computational technologies provide new opportunities for applied research and the fundamental sciences. Concurrently, dramatic increases in the three V's (Volume, Velocity, and Variety) of experimental data and the scale of computational tasks produced the demand for new real-time processing systems at experimental facilities. Recently, this demand was addressed by the Spark-MPI approach connecting the Spark data-intensive platform with the MPI high-performance framework. In contrast with existing data management and analytics systems, Spark introduced a new middleware based on resilient distributed datasets (RDDs), which decoupled various data sources from high-level processing algorithms. The RDD middleware significantly advanced the scope of data-intensive applications, spreading from SQL queries to machine learning to graph processing. Spark-MPI further extended the Spark ecosystem with the MPI applications using the Process Management Interface. The paper explores this integrated platform within the context of online ptychographic and tomographic reconstruction pipelines.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Characterizing Canopy Openness in Open Forests: Spherical Densiometer and Canopy Photography Are Equivalent but Less Sensitive than Direct Measurements of Solar Radiation

In forest ecosystems, canopy openness affects understory light availability, plant growth, and tree species recruitment, thus shaping future forest composition, structure, and functional diversity. Foresters must correctly and quickly measure canopy openness to meet their management objectives. To help guide the selection of an appropriate method for measuring canopy openness, we compared three common techniques that vary in cost, complexity, and time required for measurements and data processing: smartphone-based hemispherical photography, spherical densiometer measurements, and direct measurements of solar radiation (using AccuPAR ceptometer). We measured canopy openness using these three methods on 28 permanent forest health monitoring plots in pine-oak forests of the Central Pine Barrens of Long Island in New York State. By analysis of variance and regression analyses, we found the three methods (particularly densiometer and hemispherical photographs) yielded broadly equivalent and strongly positively correlated descriptions of canopy openness. The direct measurements of solar radiation seemed to have a greater potential to detect subtle variation in forest understory light. Forest managers may sufficiently characterize canopy openness using quick and cheap methods (e.g., spherical densiometers) and avoid larger costs of devices for direct light measurements (e.g., ceptometers) and the larger data processing times of hemispherical photography.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Continued Data Acquisition Development

This task focused on improving techniques for integrating data acquisition of secondary particles correlated in time with detected cosmic-ray muons. Scintillation detectors with Pulse Shape Discrimination (PSD) capability show the most promise as a detector technology based on work in FY13. Typically PSD parameters are determined prior to an experiment and the results are based on these parameters. By saving data in list mode, including the fully digitized waveform, any experiment can effectively be replayed to adjust PSD and other parameters for the best data capture. List mode requires time synchronization of two independent data acquisitions (DAQ) systems: the muon tracker and the particle detector system. Techniques to synchronize these systems were studied. Two basic techniques were identified: real time mode and sequential mode. Real time mode is the preferred system but has proven to be a significant challenge since two FPGA systems with different clocking parameters must be synchronized. Sequential processing is expected to work with virtually any DAQ but requires more post processing to extract the data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

SAIL-Net CloudPuck CCN Data

SAIL-Net is a DOE funded project in the East River Watershed near Crested Butte, Colorado with the goal of advancing our understanding of aerosol-cloud interactions in complex, mountainous regions. Through the deployment of a network of six low cost microphysics nodes in Fall 2021 in the same domain at the SAIL campaign, SAIL-Net provides data on aerosol size distributions, cloud condensation nuclei (CCN), and ice nucleations particles (INP). This network enables the investigation of small-scale variations in complex terrain. This specific dataset provides the cleaned data recorded from the CloudPuck, an in house instrument made by Handix Scientific that counts CCN concentrations. The CloudPuck was deployed at the sites for the summer/fall of 2022 before winter conditions were too harsh to maintain the instrument. For more information on the the CloudPuck or how the raw data are processed, see the read me.

54 ENVIRONMENTAL SCIENCES↗