Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resistivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

High thermal stability and low electrical resistivity carbon-containing Cu film on barrierless Si

Interfacial structures and electrical resistivities of a carbon-doped Cu film at different annealing temperatures and times were investigated. The film was prepared by magnetron sputtering on barrierless silicon. After annealing, grain growth was distinctly hindered and a carbon-containing nanometer thick passive amorphous layer was formed at the film/substrate interface. The film had a resistivity of about 2.7 muOMEGA cm after annealing at 400 deg. C for 1 h and maintained a low resistivity of 3.8 muOMEGA cm even after 9 h annealing at 400 deg. C. The low electrical resistivity in combination with the high thermal stability makes carbon doping a promising technique for future Cu interconnects on barrierless Si.

36 MATERIALS SCIENCE↗

Ideal and resistive edge stability calculations with M3D-C{sup 1}

Growth rates of edge localized modes for various benchmark equilibria, including a diverted equilibrium, are calculated using the nonideal fluid code M3D-C{sup 1}. Growth rates calculated by M3D-C{sup 1} in the ideal limit are found to agree with those calculated by ideal magnetohydrodynamics codes. The effects of nonuniform density and resistivity profiles are explored, as well as the sensitivity of growth rates to the position of the ideal vacuum-plasma interface. Growth rates of the diverted equilibrium are found to be particularly sensitive to moving this interface inward from the separatrix, but less sensitive to extending the plasma region beyond the separatrix. The resistivity profile within the plasma is found not to affect growth rates significantly; however, growth rates may be greatly reduced by treating the outer region as a resistive plasma instead of an ideal vacuum. Indeed, it is found that for typical scrape-off layer (SOL) temperatures, the resistive SOL model behaves more like an ideal plasma than a vacuum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GaAs, AlGaAs and InGaP Tunnel Junctions for Multi-Junction Solar Cells Under Concentration: Resistance Study

The following four TJ designs, AlGaAs/AlGaAs, GaAs/GaAs, AlGaAs/InGaP and AlGaAs/GaAs are studied to determine minimum doping concentration to achieve a resistance of <10{sup -4} {omega}{center_dot}cm{sup 2} and a peak tunneling current suitable for MJ solar cells up to 1500-suns concentration (operating current of 21 A/cm{sup 2}). Experimentally calibrated numerical models are used to determine how the resistance changes as a function of doping concentration. The AlGaAs/GaAs TJ design is determined to require the least doping concentration to achieve the specified resistance and peak tunneling current, followed by the GaAs/GaAs, and AlGaAs/AlGaAs TJ designs. The AlGaAs/InGaP TJ design can only achieve resistances >5x10{sup -4} {omega}cm{sup 2}.

36 MATERIALS SCIENCE↗

Effect of microstructure on Au/sapphire interfacial thermal resistance

We deposit Au films on single crystal sapphire substrates by sputtering and evaporation methods. The microstructure characteristics such as crystal textures, grain sizes, and fraction of contacted area of the films are examined by x-ray diffraction and transmission electron microscopy. The sputtered films have an average grain size of about 200 nm and perfectly attach to the substrates; the as-evaporated films partially attach to the substrate; the grain size varies from 10 to 30 nm, and after annealing, increases to 50 nm. Au{sub 2}Al phase is observed in the annealed samples. The interfacial thermal resistance is measured by a frequency domain thermoreflectance method. The thermal resistance of the sputtered Au/sapphire interfaces is 35.5x10{sup -9} m{sup 2} K W{sup -1}, and those of the evaporated samples are up to three times as large as this value. The change in interfacial thermal resistance is explained by the effect of detachment using a parallel arranged thermal resistance model, the effect of grain size, and the influence of chemical bonding at the interfaces.

36 MATERIALS SCIENCE↗

Characterization Of An EBL System: The Influence Of Process Parameters On Thickness Resist And Engraving Shapes

In LIGA process, the low flexibility due to the use of masks might be overcome using the electron beam of a scansion electron microscope (SEM) instead of the synchrotron radiation. In this way, through the vector control of the beam, it is possible to irradiate a specific path on the resist without using any mask. Anyway, it is important to remark that the Electron Beam Lithography (EBL) can not include all the applications of the X-ray LIGA technique but it could be a valid alternative only for some specific uses. In particular, some limits concerning the impression of high thickness resists are expected. An EBL system based on a SEM was recently implemented by the authors and some tests were carried out to characterize the device performances. Aim of this work is to asses the system performances in terms of maximum impressible thickness resist and shape of the engraved entities. Several tests were carried out by varying the resist thickness and the process parameters.

07 ISOTOPE AND RADIATION SOURCES↗

Origin of resistivity change in NiO thin films studied by hard x-ray photoelectron spectroscopy

We investigated origins of the resistivity change during the forming of NiO based resistive random access memories in a nondestructive way using hard x-ray photoelectron spectroscopy. Energy shifts and bandgap states observed after switching suggest that oxygen vacancies are created in the low resistive state. As a result conduction may occur via defects such as electrons traps and metallic nickel impurities. Migration of oxygen atoms seems to be the driving mechanism. This provides concrete evidence of the major role played by oxygen defects in decreasing resistivity. This is a key point since oxygen vacancies are particularly unstable and thus difficult to identify by physico-chemical analyses.

36 MATERIALS SCIENCE↗

Origins of low resistivity in Al ion-implanted ZnO bulk single crystals

The origins of low resistivity in Al ion-implanted ZnO bulk single crystals are studied by combining Rutherford backscattering spectroscopy (RBS), nuclear reaction analysis (NRA), photoluminescence (PL), and Van der Pauw methods. The Al-ion implantation (peak concentration: 2.6 x 10{sup 20}cm{sup -3}) into ZnO is performed using a multiple-step energy. The resistivity decreases from {approx}10{sup 4{Omega}} cm for un-implanted ZnO to 1.4 x 10{sup -1{Omega}} cm for as-implanted, and reaches 6.0 x 10{sup -4{Omega}} cm for samples annealed at 1000 deg. C. RBS and NRA measurements for as-implanted ZnO suggest the existence of the lattice displacement of Zn (Zn{sub i}) and O (O{sub i}), respectively. After annealing at 1000 deg. C, the Zn{sub i} related defects remain and the O{sub i} related defects disappear. The origin of the low resistivity in the as-implanted sample is attributed to the Zn{sub i} ({approx}30 meV [Look et al., Phys. Rev. Lett. 82, 2552 (1999)]). In contrast, the origin of the low resistivity in the sample annealed at 1000 deg. C is assigned to both of the Zn{sub i} related defects and the electrically activated Al donor. A new PL emission appears at around 3.32 eV after annealing at 1000 deg. C, suggesting electrically activated Al donors.

36 MATERIALS SCIENCE↗

Anomalous resistivity effect on multiple ion beam emission and hard x-ray generation in a Mather type plasma focus device

Multi ion beam and hard x-ray emissions were detected in a high inductance (more than 100 nH) Mather type plasma focus (PF) device at different filling gas pressures and charging voltages. The signal analysis was performed through the current trace, as it is the fundamental signal from which all of the phenomena in a PF device can be extracted. Two different fitting processes were carried out according to Lee's computational (snow-plow) model. In the first process, only plasma dynamics and classical (Spitzer) resistances were considered as energy consumer parameters for plasma. This led to an unsuccessful fitting and did not answer the energy transfer mechanism into plasma. A second fitting process was considered through the addition of anomalous resistance, which provided the best fit. Anomalous resistance was the source of long decrease in current trace, and multi dips and multi peaks of high voltage probe. Multi-peak features were interpreted considering the second fitting process along with the mechanisms for ion beam production and hard x-ray emission. To show the important role of the anomalous resistance, the duration of the current drop was discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hyper-resistivity and electron thermal conductivity due to destroyed magnetic surfaces in axisymmetric plasma equilibria

In order to model the effects of small-scale current-driven magnetic fluctuations in a mean-field theoretical description of a large-scale plasma magnetic field B(x,t), a space and time dependent hyper-resistivity {Lambda}(x,t) can be incorporated into the Ohm's law for the parallel electric field E Dot-Operator B. Using Boozer coordinates, a theoretical method is presented that allows for a determination of the hyper-resistivity {Lambda}({psi}) functional dependence on the toroidal magnetic flux {psi} for arbitrary experimental steady-state Grad-Shafranov axisymmetric plasma equilibria, if values are given for the parallel plasma resistivity {eta}({psi}) and the local distribution of any auxiliary plasma current. Heat transport in regions of plasma magnetic surfaces destroyed by resistive tearing modes can then be modeled by an electron thermal conductivity k{sub e}({psi})=({epsilon}{sub 0}{sup 2}m{sub e}/e{sup 2}){Lambda}({psi}), where e and m{sub e} are the electron charge and mass, respectively, while {epsilon}{sub 0} is the permittivity of free space. An important result obtained for axisymmetric plasma equilibria is that the {psi}{psi}-component of the metric tensor of Boozer coordinates is given by the relation g{sup {psi}{psi}}({psi}){identical_to}{nabla}{psi} Dot-Operator {nabla}{psi}=[{mu}{sub 0}G({psi})][{mu}{sub 0}I({psi})]/{iota}({psi}), with {mu}{sub 0} the permeability of free space, G({psi}) the poloidal current outside a magnetic surface, I({psi}) the toroidal current inside a magnetic surface, and {iota}({psi}) the rotational transform.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parallel resistivity and ohmic heating of laboratory dipole plasmas

The parallel resistivity is calculated in the long-mean-free-path regime for the dipole plasma geometry; this is shown to be a neoclassical transport problem in the limit of a small number of circulating electrons. In this regime, the resistivity is substantially higher than the Spitzer resistivity due to the magnetic trapping of a majority of the electrons. This suggests that heating the outer flux surfaces of the plasma with low-frequency parallel electric fields can be substantially more efficient than might be naively estimated. Such a skin-current heating scheme is analyzed by deriving an equation for diffusion of skin currents into the plasma, from which quantities such as the resistive skin-depth, lumped-circuit impedance, and power deposited in the plasma can be estimated. Numerical estimates indicate that this may be a simple and efficient way to couple power into experiments in this geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic reconnection mediated by hyper-resistive plasmoid instability

Magnetic reconnection mediated by the hyper-resistive plasmoid instability is studied with both linear analysis and nonlinear simulations. The linear growth rate is found to scale as S{sub H}{sup 1/6} with respect to the hyper-resistive Lundquist number S{sub H}≡L{sup 3}V{sub A}/η{sub H}, where L is the system size, V{sub A} is the Alfvén velocity, and η{sub H} is the hyper-resistivity. In the nonlinear regime, reconnection rate becomes nearly independent of S{sub H}, the number of plasmoids scales as S{sub H}{sup 1/2}, and the secondary current sheet length and width both scale as S{sub H}{sup −1/2}. These scalings are consistent with a heuristic argument assuming secondary current sheets are close to marginal stability. The distribution of plasmoids as a function of the enclosed flux ψ is found to obey a ψ{sup −1} power law over an extended range, followed by a rapid fall off for large plasmoids. These results are compared with those from resistive magnetohydrodynamic studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of resistivity gradient on laser-driven electron transport and ion acceleration

The effect of resistivity gradient on laser-driven electron transport and ion acceleration is investigated using collisional particle-in-cell simulation. The study is motivated by recent proton acceleration experiments [Gizzi et al., Phys. Rev. ST Accel. Beams 14, 011301 (2011)], which showed significant effect of the resistivity gradient in layered targets on the proton angular spread. This effect is reproduced in the present simulations. It is found that resistivity-gradient generation of magnetic fields and inhibition of electron transport is significantly enhanced when the feedback interaction between the magnetic field and the fast-electron current is included. Filamentation of the laser-generated hot electron jets inside the target, considered as the origin of the nonuniform proton patterns observed in the experiments, is clearly suppressed by the resistive magnetic field. As a result, the electrostatic sheath field at the target back surface acquires a relatively smooth profile, which contributes to the superior quality of the proton beams accelerated off layered targets in the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical and microstructure analysis of nickel-based low-resistance ohmic contacts to n-GaSb

Ultra low resistance ohmic contacts are fabricated on n-GaSb grown by molecular beam epitaxy. Different doping concentrations and n-GaSb thicknesses are studied to understand the tunneling transport mechanism between the metal contacts and the semiconductor. Different contact metallization and anneal process windows are investigated to achieve optimal penetration depth of Au in GaSb for low resistances. The fabrication, electrical characterization, and microstructure analysis of the metal-semiconductor interfaces created during ohmic contact formation are discussed. The characterization techniques include cross-sectional transmission electron microscopy and energy dispersive spectroscopy. Specific transfer resistances down to 0.1 Ω mm and specific contact resistances of 1 × 10{sup −6} Ω cm{sup 2} are observed.

36 MATERIALS SCIENCE↗

Zero-resistance states in Hall bars at low microwave frequency irradiation

We report on theoretical studies of recently discovered radiation-induced resistance oscillations and zero resistance states in Hall bars when the irradiation frequency is very low. In this situation the photon energy is much smaller than the spacing between the Landau levels and therefore interlevel transitions are excluded. We apply the radiation-driven electron orbit model concluding that the resistance suppression is a manifestation of “long-wavelength” resistance oscillations where only one complete oscillation is observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly uniform bipolar resistive switching characteristics in TiO{sub 2}/BaTiO{sub 3}/TiO{sub 2} multilayer

Nanoscale multilayer structure TiO{sub 2}/BaTiO{sub 3}/TiO{sub 2} has been fabricated on Pt/Ti/SiO{sub 2}/Si substrate by chemical solution deposition method. Highly uniform bipolar resistive switching (BRS) characteristics have been observed in Pt/TiO{sub 2}/BaTiO{sub 3}/TiO{sub 2}/Pt cells. Analysis of the current-voltage relationship demonstrates that the space-charge-limited current conduction controlled by the localized oxygen vacancies should be important to the resistive switching behavior. X-ray photoelectron spectroscopy results indicated that oxygen vacancies in TiO{sub 2} play a crucial role in the resistive switching phenomenon and the introduced TiO{sub 2}/BaTiO{sub 3} interfaces result in the high uniformity of bipolar resistive switching characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The influence of Reynolds numbers on resistance properties of jet pumps

Jet pumps are widely used in thermoacoustic Stirling heat engines and pulse tube cryocoolers to eliminate the effect of Gedeon streaming. The resistance properties of jet pumps are principally influenced by their structures and flow regimes which are always characterized by Reynolds numbers. In this paper, the jet pump of which cross section contracts abruptly is selected as our research subject. Based on linear thermoacoustic theory, a CFD model is built and the oscillating flow of the working gas is simulated and analyzed with different Reynolds numbers in the jet pump. According to the calculations, the influence of different structures and Reynolds numbers on the resistance properties of the jet pump are analyzed and presented. The results show that Reynolds numbers have a great influence on the resistance properties of jet pumps and some empirical formulas which are widely used are unsuitable for oscillating flow with small Reynolds numbers. This paper provides a more comprehensive understanding on resistance properties of jet pumps with oscillating flow and is significant for the design of jet pumps in practical thermoacoustic engines and refrigerators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Three-terminal resistive switching memory in a transparent vertical-configuration device

The resistive switching phenomenon has attracted much attention recently for memory applications. It describes the reversible change in the resistance of a dielectric between two non-volatile states by the application of electrical pulses. Typical resistive switching memories are two-terminal devices formed by an oxide layer placed between two metal electrodes. Here, we report on the fabrication and operation of a three-terminal resistive switching memory that works as a reconfigurable logic component and offers an increased logic density on chip. The three-terminal memory device we present is transparent and could be further incorporated in transparent computing electronic technologies.

36 MATERIALS SCIENCE↗

Resistive switching memories in MoS{sub 2} nanosphere assemblies

A resistive switching memory device consisting of reduced graphene oxide and indium tin oxide as top/bottom two electrodes, separated by dielectric MoS{sub 2} nanosphere assemblies as the active interlayer, was fabricated. This device exhibits the rewritable nonvolatile resistive switching with low SET/RESET voltage (∼2 V), high ON/OFF resistance ratio (∼10{sup 4}), and superior electrical bistability, introducing a potential application in data storage field. The resistance switching mechanism was analyzed in the assumptive model of the electron tunneling across the polarized potential barriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗