SEARCH · Engineering Papers

Results for “protocol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Revisiting the definition of field capacity as a functional parameter in a layered agronomic soil profile beneath irrigated maize

The soil water content at the condition of field capacity (θ FC ) is a key parameter in irrigation scheduling and has been suggested to be determined by running a synthetic drainage experiment until the flux rate (q) at the bottom of the soil profile achieves a predefined negligible value (q FC ). We question the impact of q FC on the assessment of field capacity. Moreover, calculating θ FC as the integral mean of the water content profile when q is equal to q FC is strictly valid only for uniform soil profiles. By contrast, this practice is ambiguous and biased for stratified soil profiles due to the soil water content discontinuity at the layer interfaces. In this study, the concept of field capacity was revisited and adapted to practical agronomic heuristics. By resorting to the assessment of root-zone water storage capacity (W), we envision field capacity as a functional hydraulic parameter derived from synthetic irrigation scheduling scenarios to minimize drought stress, drainage, and nitrate leachate below the root zone. A functional analysis was carried out on a 135-cm-thick layered soil profile beneath maize in eastern Nebraska. On-farm irrigation scheduling applications and agricultural practices were recorded for 20 years (2001–2020) at a daily time step. Hydrus-1D was calibrated and validated with direct measurements of the soil water retention curve and soil water content data, respectively, in each soil layer. A set of functional field capacity values was derived from 24 irrigation scheduling scenarios, and the optimal water storage capacity at field capacity (W FC ) was approximately 50 cm (corresponding to about 80% saturation in the soil profile). An average irrigation amount of 217.5 mm distributed over 21 events was obtained by using optimal irrigation scheduling, which was initiated when the matric pressure head took on a value of –700 cm and the irrigation rate was set at 1.0 cm d –1 . This irrigation practice ensured water storage at approximately the same level (ideally at W FC ) by sustaining only evapotranspiration fluxes in the uppermost portion of the root zone and by limiting excessive drainage. This protocol can be transferred to other agricultural fields.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Isolation and characterization of microalgae strains able to grow on complex biomass hydrolysate for industrial application

Producing algae biomass economically remains one of the chief bottlenecks for commercializing algae products. The aim of this work is to identify new strains of algae that can grow on cost effective media derived from cellulosic waste streams, characterize the potential of these strains to produce compounds of high industrial value, and identify those strains capable of facile genetic transformation. Here we report, out of 45 strains initially isolated, three were selected based on their ability to efficiently grow on organic waste material (corn stover hydrolysate) as a carbon source; Chlorococcum sp., Desmodesmus sp., and Chlamydomonas debaryana. Untargeted metabolomics was performed on each strain, identifying several metabolites of high relative abundances that are of commercial interest, such as lactic acid, butane-2,3-diol, amino acids, tartaric acid, triacylglycerols, and lipid species containing different, mono- and polyunsaturated fatty acids, depending on the strain and growth condition. The strains also produced carbohydrates of industrial relevance. Chlorococcum sp. was found to be genetically transformable using standard simple transformation protocols. These results suggest that with further development, these strains could open the door to economic production of high value commercial compounds utilizing waste streams from cellulosic biomass.

09 BIOMASS FUELS↗

DOE OSTI2025

Axenisation of oleaginous microalgal cultures via anoxic photosensitisation

Growing interest in sustainable food and biofuel research has necessitated high quality axenic oleaginous microalgal strains. Unfortunately, most strains available in culture banks contain commensal microbes such as bacteria and the default decontamination method involves antibiotic treatment which has begun to exacerbate the emergence of antibiotic resistance. To overcome this problem, anoxic photosensitisation was investigated as an alternate approach. Four oleaginous microalgal species (Tetradesmus obliquus, Desmodesmus armatus, Chlorella vulgaris and Nannochloropsis limnetica) were incubated in varying concentrations of Rose Bengal (0 μM, 1 μM, 3 μM or 9 μM) either in normal (oxic) or anoxic conditions, for 72 h under light (8.85 ± 0.4 W/m 2 ) in a specially designed heterotrophic growth complex (HGC) medium, followed by 72 h in standard Bold's Basal Medium (BBM). Commonly used antibiotics-based protocol was used as the control method. Post treatment, cell numbers and percentage populations were counted with Flow Cytometry, and viability was tested using standard plating methods using BBM and LB. Additionally, the contaminating microbes in the cultures were profiled using 16Ss rRNA sequencing. Anoxic conditions were able to significantly decrease bacterial content, albeit with an equally detrimental effect on the microalgal population. Although the responses differed between the microalgae, anoxic incubation along with Rose Bengal at 3 μM was able to completely decontaminate N. limnetica and C. vulgaris, while D. armatus and T. obliquus could be decontaminated with an additional streak-plating step. None of the cultures could be decontaminated using antibiotics treatment. These results suggest that axenisation of microalgal cultures was largely due to anoxy, that was synergistically enhanced by Rose Bengal at a concentration of ≥3 μM.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Optimized Lie–Trotter–Suzuki decompositions for two and three non-commuting terms

Lie–Trotter–Suzuki decompositions are an efficient way to approximate operator exponentials exp ( t H ) when H is a sum of n (non-commuting) terms which, individually, can be exponentiated easily. They are employed in time-evolution algorithms for tensor network states, digital quantum simulation protocols, path integral methods like quantum Monte Carlo, and splitting methods for symplectic integrators in classical Hamiltonian systems. Here, we provide optimized decompositions up to order t 6 . The leading error term is expanded in nested commutators (Hall bases) and we minimize the 1-norm of the coefficients. For n = 2 terms, several of the optima we find are close to those in McLachlan (1995). Generally, our results substantially improve over unoptimized decompositions by Forest, Ruth, Yoshida, and Suzuki. We explain why these decompositions are sufficient to efficiently simulate any one- or two-dimensional lattice model with finite-range interactions. This follows by solving a partitioning problem for the interaction graph.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Entanglement Enabled Intensity Interferometry of different wavelengths of light

Highlights: • We use quantum entanglement to erase the color of photons for a new imaging method. • Can achieve higher resolution imaging by accessing hidden phase information. • We detail practical experimental designs to implement our theoretical protocols. We propose methods to perform intensity interferometry of photons having two different wavelengths. Distinguishable particles typically cannot interfere with each other, but we overcome that obstacle by processing the particles via entanglement and projection so that they lead to the same final state at the detection apparatus. Specifically, we discuss how quasi-phase-matched nonlinear crystals can be used to convert a quantum superposition of light of different wavelengths onto a common wavelength, while preserving the phase information essential for their meaningful interference. We thereby gain access to a host of new observables, which can probe subtle frequency correlations and entanglement. Further, we generalize the van Cittert–Zernike formula for the intensity interferometry of extended sources, demonstrate how our proposal supports enhanced resolution of sources with different spectral character, and suggest potential applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Visually resolving the direct Z-scheme heterojunction in CdS@ZnIn 2 S 4 hollow cubes for photocatalytic evolution of H 2 and H 2 O 2 from pure water

We report the direct Z-scheme heterojunction has been recently emerging as an appealing architecture for photocatalysts design. Its efficiency depends on the interfacial and structural features of the photocatalysts. Herein, the two-dimensional ZnIn 2 S 4 nanosheets are grown on the surface of CdS hollow cubes to construct the CdS@ZnIn 2 S 4 hierarchical hollow photocatalysts with chemically bonded interface. The visualized measurements based on spatial-resolved surface photovoltage spectroscopy, combined with other spectroscopic and simulation investigations, clearly disclose that the CdS@ZnIn 2 S 4 hollow cubes constitute a highly efficient direct Z-scheme system. This accounts for the stoichiometric generation of H 2 and H 2 O 2 from pure water observed for the CdS@ZnIn 2 S 4 sulfide-only photocatalysts under visible light irradiation with an apparent quantum efficiency of 1.63 % at 400 nm. The present work demonstrates an effective protocol to achieve comprehensive insights into the charge transfer route at semiconductor heterojunction, and offers a viable way for constructing efficient sulfide-only photocatalysts for driving water splitting reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

A comparative study between real-world and laboratory accelerated aging of Cu/SSZ-13 SCR catalysts

Elucidating aging mechanisms in real-world applications is a critical component for developing and maintaining Cu/SSZ-13 SCR catalysts. To reveal gaps between laboratory accelerated aging and real-world aging, herein we report thorough comparative studies between 6 representative catalysts. Here, we apply a wide range of catalyst characterization methods, including surface area/porosity analysis, X-ray diffraction (XRD), H 2 -temperature programmed reduction, NH3-temperaure programmed desorption, solid-state nuclear magnetic resonance (NMR), in situ X-ray photoelectron (XPS) and electron paramagnetic resonance (EPR) spectroscopies, to gain atomic-level knowledge on Cu transformation under different aging protocols. We then correlate such knowledge to SCR, NH 3 /NO oxidation kinetic behavior of the catalysts. We found that sulfur aging plays the most important role in interpreting catalyst degradation during real-world application, including direct sulfur poisoning of isolated Cu II SCR active species to CuSO 4 -like species, the agglomeration of such species to multinuclear CuSO 4 clusters, and eventually, CuO formation during desulfation treatments. Such chemistries convert SCR active Cu to SCR inert Cu moieties without severely deteriorating catalyst support integrity. These characteristics are partially replicated by hydrothermal aging in the presence of SOx but are poorly mimicked by hydrothermal aging alone.

36 MATERIALS SCIENCE↗

DOE OSTI2023

A redox model for NO oxidation, NH 3 oxidation and high temperature standard SCR over Cu-SSZ-13

A kinetic model is developed to predict the influence of temperature and hydrothermal aging on the redox of active Cu sites under standard SCR, NO oxidation and NH 3 oxidation conditions over a practically relevant fully-formulated Cu-SSZ-13 catalyst. NO 2 /N 2 production during NO/NH 3 titration of Cu II sites is utilized to identify rate parameters associated with NO-only RHC (reduction half cycle) and NH 3 -only RHC respectively. Integral N 2 formation during subsequent NO + NH 3 titration is consistent with the production of one NO 2 per two CuII sites reduced during NO-only RHC and one N 2 per six Cu II sites reduced during NH 3 -only RHC. Decreased reduction of Cu II sites by NO/NH 3 upon hydrothermal aging, along with the production of one NO 2 per two CuII sites during NO-only RHC, is accordant with the involvement of proximal ZCuOH and oxygen-bridged dimeric Cu II sites. Oxidation of partially solvated and framework coordinated ZCu (Cu I ) sites occurs in presence of O 2 , does not produce N 2 and can lead to the consumption of Brønsted acid sites. A global OHC kinetic model is developed to predict transient and integral N 2 formation during exposure of CuI sites to a mixture of NO and O 2 . The resulting redox kinetic model quantitatively predicts NO and NH 3 consumption during isothermal transient response Cu redox (TRCR) protocols, along with temperature and age dependent steady-state standard SCR and oxidation conditions. The redox model presented in this work synthesizes recent kinetic, spectroscopic and computational findings to provide a foundational description of active site redox during standard SCR, NO oxidation and NH3 oxidation over Cu-SSZ-13.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Electrocatalytic benchmarking of ruthenium-based bimetallic anodes for the electrocatalytic oxidation of biomass-derived wastewater

In this paper, we report on the synthesis, characterization, and use of ruthenium oxide (RuO 2 ) doped with a secondary metal (M2) to enhance electrochemical activity and stability for the electrocatalytic oxidation (ECO) of biomass-derived wastewaters. We used different electrochemical methods such as cyclic voltammetry (CV), electrochemical surface area (ECSA), and Tafel analysis as well as physical characterization such as grazing incidence X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy to understand how the introduction of M2 affects electrochemical performance. Our results show that including an M2 improves the ECO performance regardless of the composition of the electrolyte. Specifically, we saw increase in ECSA, which could be due to enhanced charge transfer for the pH ranges evaluated. Furthermore, the introduction of organic compounds in wastewater generated during the hydrothermal liquefaction of food waste affected the ECO performance differently, depending on M2, the electrolyte composition, and anodic half-cell potential, highlighting the need to properly control the reaction conditions when testing and characterizing the electrocatalysts under different reaction regimes. We developed an in situ electrocatalytic benchmarking protocol, Boruah – Lopez-Ruiz – Strange (BLoRS), to quickly assess if the presence of M2 improves the ECO performance; thus, saving time and resources in ex situ characterization, testing, and product analysis. This foundational work provides the basis for characterization and benchmarking of electrodes of the ECO of organic compounds.

Electrocatalysis↗

DOE OSTI2020

Reliability of emergency and standby diesel generators: Impact on energy resiliency solutions

Emergency diesel generators are the most common form of backup power for critical loads when the grid fails and are most often deployed as stand-alone generators (<2000 kW) tied to individual buildings for hospitals, emergency services, military bases, ports, airports, industries, and commercial facilities. Understanding the finite reliability of emergency diesel generators during continuous operation is critical for energy planners, managers, and end-users. A new analysis of two large non-public emergency diesel generator operational data sets shows that commonly used reliability metrics are inadequate to predict the performance during a grid outage. Additional metrics addressing the likelihood of an emergency diesel generator to be available at the time an outage starts, successfully start and carry load, and constantly run for the duration of the outage are needed to predict the continuous run-time reliability of emergency diesel generators during a grid outage. This is the first analysis of the reliability of modern generators that follow standard maintenance protocols commonly used for backup power and these new metrics are shown to be dependent on the level of emergency diesel generator maintenance with values that can vary by more than an order of magnitude. Even using the new metrics for well-maintained emergency diesel generators, the analysis shows that the single emergency diesel generators configurations are only 80% likely to provide power for the duration of a two-week grid outage.

ENERGY PLANNING, POLICY, AND ECONOMY,POWER TRANSMI↗

DOE OSTI2020

Co-optimizing water-alternating-carbon dioxide injection projects using a machine learning assisted computational framework

In this report, a robust machine-learning-based computational framework that couples multi-layer neural network (MLNN) proxies and a multi-objective particle swarm optimizer (MOPSO) to design water-alternating-carbon dioxide injection (CO 2 -WAG) projects is presented. The proposed optimization protocol considers various objectives, including oil recovery and CO 2 storage volume. Expert MLNN systems are trained and employed as surrogate models of the high-fidelity compositional simulator in the optimization workflow. When multiple objective functions are considered, two approaches are employed to treat the objectives: the weighted sum method and the Pareto-front-based scheme. A field-scale implementation focusing on tertiary recovery in the Morrow B formation at Farnsworth Unit (FWU) is presented. The developed Pareto-optimal solutions indicate the maximal available oil production can be 1.64 × 10 7 barrels and maximal carbon storage can achieve 2.35 × 10 7 tons. Trade-offs factor is defined to divide the constructed Pareto front into 4 sections with the trade-off factors’ value ranges from 0.35 to 49.9. This work also compares the optimum solution found by the aggregative objective function and the solution repository covered by the Pareto front that considers the physical and operational constraints and reduces uncertainties involved by the multi-objective optimization process. Our comparison indicates multiple solutions exist to satisfy the objective criteria of the WAG design, and these results cannot be found using the traditional weighted sum method. The Pareto front solution can provide more options for project designers, but decisions regarding necessary trade-offs must be made using the solution repository to balance the project economics and CO 2 storage amount.

10 SYNTHETIC FUELS↗

DOE OSTI2020

Large-area nanostructured surfaces with tunable zeta potentials

Through a refined fabrication protocol based on block-copolymer self-assembly we synthesize nanostructured surfaces with conical nanopillars of different height (60, 120, and 200 nm) in hexagonal arrays with uniform spacing (~50 nm) over large areas (>cm 2 ). While the nanostructured surfaces fabricated on silicon substrates display superhydrophilic behavior, superhydrophobic properties are attained by coating with octadecyltrichlorosilane (OTS). Negative zeta potentials for all the studied surfaces are reported by electrokinetic flow measurements with aqueous KCl solutions at different concentrations (1 and 10 mM) and pH values between 4 and 8. While the surface nanostructure reduces the zeta potential magnitude, the hydrophobic OTS coating enhances it. Experimental results can be accounted for by a site-dissociation model for the surface charge density. The reported wetting properties and zeta potential tunability makes the studied surfaces particularly relevant for applications such as energy conversion and storage, membrane-based water treatment and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Effect of PVD-coated chromium on the subcooled flow boiling performance of nuclear reactor cladding materials

Here we elucidate the separate effect of a thin Cr coating deposited by physical vapor deposition (PVD) on the subcooled flow boiling performance of zircaloy-4. First, we run flow boiling experiments on prototypical zircaloy-4 surfaces mimicking the scratch pattern and surface roughness of nuclear reactor claddings. Then, we PVD-coat a 0.3 µm thick chromium layer on the same exact surface and repeat the same flow boiling investigations. All experiments are run using deionized water at atmospheric pressure, flowing on a 1 × 3 cm 2 rectangular cross section channel at a rate of 1000 kg/m 2 /s and a subcooling of 10 K. We measure the average temperature of the boiling surface at increasing surface heat fluxes, covering a wide range of heat transfer regimes, from single-phase forced convection to the boiling crisis. We also record high-speed videos of the boiling process, which we postprocess to measure bubble nucleation site density, growth time, departure diameter and frequency. The surface analysis reveals that, while the chromium coating does not seem change the surface roughness and morphology, it improves surface wettability. However, it decreases the critical heat flux. The chromium coating causes an increase of nucleation temperature, bubble departure diameter and growth time, and a reduction of the nucleation site density. The concurrence of these observations indicates that a size reduction of the nucleation sites, conformally covered by the chromium coating, may be the cause of the boiling performance deterioration. We confirm this hypothesis repeating the same analysis on a FeCrAl sample prepared and tested using the same protocol as the zircaloy-4 sample, but with a different initial surface texture.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Non-dimensional performance and safety parameters for heat pipes

The use of heat pipes in safety-critical systems such as nuclear microreactors dictates the development of generalized, practical, scalable performance and safety parameters. Traditional dimensional metrics, while informative, lack the universality required for comparative analysis across varying designs and operating regimes. Here, this work introduces a comprehensive set of non-dimensional parameters to characterize heat pipe performance and safety, including capillary performance, effective thermal conductivity, response time, exergetic efficiency, allowable temperature gradients, allowable rate of temperature change, priming coefficients, and factor of safety. A reference heat pipe design representative of microreactor applications was analyzed via the developed parameters using both traditional analytical models and Sockeye simulations under transient and steady-state conditions. Sodium, potassium, and water were evaluated as working fluids to demonstrate the applicability of the framework across a broad temperature range. The proposed non-dimensional parameters effectively captured key thermal-hydraulic behaviors and safety concerns, as was demonstrated via Sockeye simulations. This framework supports the development of design optimization strategies, operational protocols, and safety assurance practices for advanced reactor systems and other high-reliability applications.

42 - ENGINEERING↗

DOE OSTI2022

Luminescence dosimetry for evaluation of the external exposure in Metlino, upper Techa River valley, Southern Urals, Russia: Analysis of new results

Luminescence dosimetry was applied in the former settlement of Metlino, Southern Urals, Russia as part of a full-scale study to validate the Techa River Dosimetry System (TRDS) 2016 for the upper Techa River region. The village, which was evacuated in 1956, was located 7 km downstream of the release point of liquid radioactive waste by the Mayak plutonium facility. Several brick samples were taken from north-eastern and south-eastern walls of the granary, facing the former Techa river shoreline and floodplain. Samples were all taken at the same height and measured at different depths into the brick. For the majority of brick samples, good Optically Stimulated Luminescence properties of the quartz grains were observed. In some cases, however, strong levels of sensitization and/or signal recuperation were encountered which necessitated adjustment in the measurement protocols. Anthropogenic doses in bricks varied from 1.5 to 6.6 Gy and the horizontal profiles along both walls showed significant variation, which is explained on a qualitative basis. Further, a dose depth profile is observed for selected samples, which is different from the dose depth profile measured and simulated for samples from the north-western wall of the granary in previous studies. This is qualitatively explained by the differences in source configuration.

61 RADIATION PROTECTION AND DOSIMETRY↗

DOE OSTI2025

One-dimensional heterocyclic carbene–Au metal–organic frameworks bridging ultra-high vacuum models and scalable liquid-phase growth

The controlled design of molecule–metal interfaces is central to the development of functional nanomaterials for catalysis, sensing, and molecular electronics. Here we show that the adsorption of a Janus-type diimidazolium precursor on gold yields one-dimensional (1D) N-heterocyclic carbene (NHC)–Au–NHC metal organic frameworks (MOFs) featuring positively charged gold nodes. Using synchrotron X-ray photoemission spectroscopy (XPS), near edge X-ray adsorption fine structure (NEXAFS) spectroscopy and scanning tunnelling microscopy (STM), we demonstrate that thermal activation promotes counterion removal and drives the formation of extended 1D arrays, characterized by ∼1.0 nm Au–Au spacing and adatom densities up to 0.6 atom nm −2 (∼4% of surface atoms). Importantly, we translate this ultra-high vacuum (UHV) benchmark into a scalable solution-phase protocol in ethanol, enabling 1D-MOF growth under mild, base-free, open-air conditions. The resulting films retain structural and electronic signatures of UHV-grown systems, bridging model studies and practical synthesis. This approach establishes NHC–metal frameworks as accessible, tunable platforms for catalysis and materials design.

Gold adatoms↗

DOE OSTI2021

Germplasm cryopreservation of macroalgae for aquaculture breeding and natural resource conservation: A review

The expansion of the global macroalgal aquaculture and climate change creates the need for germplasm preservation of valuable aquaculture strains and maintenance of natural biodiversity. Compared to the large number of studies in fish and shellfish species, relative few studies have been conducted on the macroalgal germplasm cryopreservation. The first cryopreservation of macroalgae to –75 °C was reported on Neopyropia tenera (formerly called Porphyra tenera) in 1964. To date, a total of 34 studies reported germplasm cryopreservation in 33 species, including Chlorophyta (7 species), Ochrophyta (14 species), and Rhodophyta (12 species). Here, the goal of this review was to summarize the published studies on macroalgal germplasm cryopreservation, compare the reported protocols for the cryopreservation process, and identify the factors affecting post-thaw viability. Overall, macroalgal germplasm cryopreservation included haploid or diploid thalli, spores, and gametes. Cryotubes (1.5-ml or 2-ml) have been widely used to package germplasm samples for cooling and storage in most studies, and the 0.5-ml straws and 5-ml cryotubes have been used in several studies. Two approaches (programmable controlled cooling and vitrification) were employed for macroalgal germplasm cryopreservation. A two-step programmable controlled cooling (e.g., from initial culture temperature to a frozen temperature, such as –40 °C, and then directly plunging into liquid nitrogen at –196 °C) was determined to be an effective cooling strategy. Vitrification, a super rapid cooling for a sample to form non-crystalline amorphous solid, was applied on macroalgal germplasm cryopreservation with sample encapsulation and dehydration. Survival of post-thaw samples varied significantly in different studies. Based on research updates, recommendations are made for future research. It is expected that this review can serve as a foundation for future germplasm banking of macroalgae for aquaculture and biodiversity preservation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Rapid and high-throughput determination of sorghum ( Sorghum bicolor ) biomass composition using near infrared spectroscopy and chemometrics

Compositional characterization of biomass is vital for the biofuel industry. Traditional wet chemistry-based methods for analyzing biomass composition are laborious, time-consuming, and require extensive use of chemical reagents as well as highly skilled personnel. In this study, near-infrared (NIR) spectroscopy was used to quickly assess the composition of above-ground vegetative biomass from 113 diverse, photoperiod-sensitive, biomass-type sorghum (Sorghum bicolor) accessions cultivated under field conditions in Central Illinois. Biomass samples were analyzed using NIR spectra collected in the spectral range of 867–2536 nm, with their chemical compositions determined following the National Renewable Energy Laboratory (NREL) protocol. Advanced spectral pre-treatment and band selection techniques were utilized to develop calibration models using partial least squares regression (PLSR). The models’ effectiveness was assessed through cross-validation and independent data tests. The predictions for moisture, ash, extractives, glucan, xylan, acid-soluble lignin (ASL), acid-insoluble lignin (AIL), and total lignin were accurate and reliable, demonstrating the capability of NIR spectroscopy to provide rapid and precise characterization of sorghum biomass. The results demonstrated that NIR spectroscopy is an efficient tool for rapidly characterizing sorghum biomass, making it a sustainable option for screening desirable feedstock for biofuel or bioproduct production.

09 BIOMASS FUELS↗