SEARCH · Engineering Papers
Results for “polymer characterization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Polyethylene Grafted Silica Nanoparticles Prepared via Surface-Initiated ROMP
Polyethylene and nanosilica represent the most ubiquitous commodity plastic and nanocomposite filler, respectively. Despite their possible utility, few examples exist in the literature of successfully combining these two materials to form polyethylene nanocomposites. Synthesizing well-defined polyethylene grafted to a surface is a significant challenge in the nanocomposites community. Presented in this paper is a synthetic approach toward polyethylene grafted nanoparticles with controllable graft density and molecular weight of the grafted polymer. The variably grafted nanoparticles were then incorporated into a commercial high density polyethylene matrix. The synthesis, characterization, and challenges in making these materials are further discussed.
A New Study on Characterization and Properties of Natural Fibers Obtained from Olive Tree (Olea europaea L.) Residues
Nowadays, fibers extracted from natural resources have a wide range of promising applications, including the prospect to be used as reinforcing material in polymer composites. In this context, the purpose of this study has been to extract fibers from different parts of the olive tree (leaves, small and large branches) and characterize their physico-chemical, thermal, and morphological properties using advanced equipment. Olive leaf (OL) fiber showed asymmetrical size distribution, as compared to those extracted from small olive branches (OSS), and big olive branches (OBS). The OL fiber exhibited 64.1% crystallinity, which is lower than that of the OSS fiber—with 65.4% crystallinity. Thermal analysis revealed that the OBS and OSS fibers are more thermally stable, compared to the OL fibers. The obtained results concluded that olive tree fibers can be suitable for being used as reinforcement material to develop polymer composites for various lightweight applications.
Systematic Investigation of the Alucone-Coating Enhancement on Silicon Anodes
Polyvinylidene fluoride (PVDF) is the most popular binder in commercial lithium-ion batteries but is incompatible with a silicon (Si) anode because it fails to maintain the mechanical integrity of the Si electrode upon cycling. Here in this paper, an alucone coating synthesized by molecular layer deposition has been applied on the laminated electrode fabricated with PVDF to systematically study the sole impact of the surface modification on the electrochemical and mechanical properties of the Si electrode, without the interference of other functional polymer binders. The enhanced mechanical properties of the coated electrodes, confirmed by mechanical characterization, can help accommodate the repeated volume fluctuations, preserve the electrode structure during electrochemical reactions, and thereby, leading to a remarkable improvement of the electrochemical performance. Owing to the alucone coating, the Si electrodes achieve highly reversible cycling performance with a specific capacity of 1490 mA h g -1 (0.90 mA h cm -2 ) as compared to 550 mA h g -1 (0.19 mA h cm -2 ) observed in the uncoated Si electrode. This research elucidates the important role of surface modification in stabilizing the cycling performance and enabling a high level of material utilization at high mass loading. It also provides insights for the future development of Si anodes.
Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application
In this study, in situ electrochemical diagnostics designed to probe ionomer interactions with platinum and carbon were applied to relate ionomer coverage and conformation, gleaned from anion adsorption data, with O 2 transport resistance for low-loaded (0.05 mg Pt cm -2 ) platinum-supported Vulcan carbon (Pt/Vu)-based electrodes in a polymer electrolyte fuel cell. Coupling the in situ diagnostic data with ex situ characterization of catalyst inks and electrode structures, the effect of ink composition is explained by both ink-level interactions that dictate the electrode microstructure during fabrication and the resulting local ionomer distribution near catalyst sites. Electrochemical techniques (CO displacement and ac impedance) show that catalyst inks with higher water content increase ionomer (sulfonate) interactions with Pt sites without significantly affecting ionomer coverage on the carbon support. Surprisingly, the higher anion adsorption is shown to have a minor impact on specific activity, while exhibiting a complex relationship with oxygen transport. Ex situ characterization of ionomer suspensions and catalyst/ionomer inks indicates that the lower ionomer coverage can be correlated with the formation of large ionomer aggregates and weaker ionomer/catalyst interactions in low-water content inks. These larger ionomer aggregates resulted in increased local oxygen transport resistance, namely, through the ionomer film, and reduced performance at high current density. In the water-rich inks, the ionomer aggregate size decreases, while stronger ionomer/Pt interactions are observed. The reduced ionomer aggregation improves transport resistance through the ionomer film, while the increased adsorption leads to the emergence of resistance at the ionomer/Pt interface. Overall, the high current density performance is shown to be a nonmonotonic function of ink water content, scaling with the local gas (H 2 , O 2 ) transport resistance resulting from pore, thin film, and interfacial phenomena.
Dense monolayer films of atomically precise graphene nanoribbons on metallic substrates enabled by direct contact transfer of molecular precursors
Atomically precise graphene nanoribbons (GNRs) of two types, chevron GNRs and N = 7 straight armchair GNRs (7-AGNRs), have been synthesized through a direct contact transfer (DCT) of molecular precursors on Au(111) and gradual annealing. This method provides an alternative to the conventional approach for the deposition of molecules on surfaces by sublimation and simplifies preparation of dense monolayer films of GNRs. The DCT method allows deposition of molecules on a surface in their original state and then studying their gradual transformation to polymers to GNRs by scanning tunneling microscopy (STM) upon annealing. We performed STM characterization of the precursors of chevron GNRs and 7-AGNRs, and demonstrate that the assemblies of the intermediates of the GNR synthesis are stabilized by π–π interactions. This conclusion was supported by the density functional theory calculations. Thus, the resulting monolayer films of GNRs have sufficient coverage and density of nanoribbons for ex situ characterization by spectroscopic methods, such as Raman spectroscopy, and may prove useful for the future GNR device studies.
Time-temperature-stress superposition of PBX 9502 compressive creep data for lifetime predictions
The plastic-bonded explosive (PBX) 9502 is a viscoelastic, high-solids loaded polymer bound composite comprised of 95 weight% (wt%) TATB explosive crystals and 5 wt% FK-800 polymer binder. The uniaxial quasi-static mechanical properties have been studied and characterized extensively over 25+ years, including creep. Creep is the strain evolution over time as a result of an asymmetric load typically at temperatures above ambient. Creep measurements to failure can take excessively long periods of time depending on various factors including applied stress, temperature, and loading rate that render a single test to failure impossible. Using the principles of time-temperature-stress superposition (TTSSP), short-term creep tests at various applied stresses and temperatures can be used for long-term creep predictions. The TTSSP model shifts short-term test data using two factors, one for temperature and stress, creating a master curve at a reference test condition. The master curve can be shifted to predict the creep response at any desired test condition. PBX 9502 compression specimens were tested at three temperatures and various applied stresses. This work discusses the TTSSP analysis of PBX 9502 compressive creep data to create a single comprehensive master curve.
F‐Box Protein‐Mediated Proteolytic Regulation of Phenylpropanoid Metabolism in Response to Biotic and Abiotic Stresses
Protein ubiquitination is a central regulatory mechanism governing plant growth, development and environmental adaptation. Ubiquitylomic studies have revealed that many enzymes in phenylpropanoid biosynthetic pathways are subject to ubiquitination. Increasing evidence indicates that specific F-box proteins target key enzymes in these pathways, including PAL, CCR, CAD, COMT and peroxidases in the lignin biosynthetic branch, and CHS in the flavonoid biosynthetic branch, thereby promoting their ubiquitination and selective degradation. These F-box proteins act in response to diverse developmental and environmental cues, including cellular carbon status, light quality and intensity, and biotic stresses (e.g., pathogen and insect attack). By regulating the stability and activity of both enzymes and regulatory proteins involved in phenylpropanoid biosynthesis, F-box proteins modulate the accumulation of simple phenolics and lignin polymers, ultimately contributing to plant resilience. This review summarizes recent advances in the characterization of F-box proteins involved in phenylpropanoid metabolism and their regulatory roles in response to biotic and abiotic stresses and identifies key knowledge gaps that limit mechanistic understanding of F-box protein-mediated proteolytic regulation of phenylpropanoid metabolism. In conclusion, insights into ubiquitin-mediated proteolytic control of phenylpropanoid metabolism offer promising avenues for enhancing bioactive phenolic production, advancing biofuel feedstock engineering and improving crop stress tolerance.
In-Situ and Ex-Situ Studies on the Morphology Changes of Polymer Pipeline Materials for Use in Hydrogen Gas Environments
The US natural gas infrastructure is a national asset that could be used to deliver hydrogen and hydrogen blends of natural gas as a pathway to reduce carbon emissions. The distribution system comprises nearly 50% plastic pipe composed of medium- and high-density polyethylene materials (MDPE and HDPE). While these materials perform adequately for natural gas, research on their hydrogen compatibility is essential to understand if any immediate and long-term risks are associated with hydrogen addition. The Blended Gas CRADA, a HyBlend project, has established a comprehensive test method for evaluating MDPE and HDPE of various plastic resin compositions of pipeline material in pure hydrogen and 20% hydrogen/80% methane blends. Both in-situ and ex-situ measurements were performed to capture hydrogen-induced changes in the polyethylene material's crystalline, amorphous and their interphase regions. We investigated MDPE and HDPE pipeline materials made from different polymer resin systems to evaluate the effects of hydrogen gas. The materials were characterized by their density, diffusion coefficient, free volume ratio, and degree of crystallinity. Various advanced characterization methods, including in situ NMR, ex situ XRD, ex situ DSC, and ex situ TDA, were used to analyze the effects of changes in crystalline, amorphous, and interphase regions due to gas exposure. Time-dependent post-decompression quasi-static tensile tests were conducted to explore the effects of gas exposure time on the mechanical behavior of the pipe materials. This work will highlight the time sensitivities during and after gas exposure. The correlation between gas-induced polyethylene morphology changes and the associated material performance will be addressed for the intended applications. These studies will show that polyethylene resin composition and material exposure are important factors when considering whether hydrogen gas affects pipeline materials positively or negatively.
A Survey of Thermal Sensing Application in Additive Manufacturing
Industry 4.0 represents a significant change in manufacturing with the inclusion of such technologies as additive manufacturing and data analytics. In support of these changes, infrared thermal imaging (IR) and very-near infrared (VNIR) have proven invaluable in numerous applications related to additive manufacturing. In this review, these applications will be presented as they relate to polymer and metal-based additive manufacturing processes. Applications including in-situ characterization, post-build analysis, experimental setups, modeling, and machine learning will be covered. With a general overview complete, the review will conclude with a discussion of challenges identified throughout the literature and thoughts on future trends.
A model for complex flows of soft glassy materials with application to flows through fixed fiber beds
The soft glassy rheology (SGR) model has successfully described the time dependent simple shear rheology of a broad class of complex fluids including foams, concentrated emulsions, colloidal glasses, and solvent-free nanoparticle-organic hybrid materials (NOHMs). The model considers a distribution of mesoscopic fluid elements that hop from trap to trap at a rate which is enhanced by the work done to strain the fluid element. While an SGR fluid has a broad exponential distribution of trap energies, the rheology of NOHMs is better described by a narrower energy distribution and we consider both types of trap energy distributions in this study. We introduce a tensorial version of these models with a hopping rate that depends on the orientation of the element relative to the mean stress field, allowing a range of relative strengths of the extensional and simple shear responses of the fluid. As an application of these models we consider the flow of a soft glassy material through a dilute fixed bed of fibers. The dilute fixed bed exhibits a range of local linear flows which alternate in a chaotic manner with time in a Lagrangian reference frame. It is amenable to an analytical treatment and has been used to characterize the strong flow response of many complex fluids including fiber suspensions, dilute polymer solutions and emulsions. We show that the accumulated strain in the fluid elements has an abrupt nonlinear growth at a Deborah number of order one in a manner similar to that observed for polymer solutions. The exponential dependence of the hopping rate on strain leads to a fluid element deformation that grows logarithmically with Deborah number at high Deborah numbers. SGR fluids having a broad range of trap energies flowing through fixed beds can exhibit a range of rheological behaviors at small Deborah numbers ranging from a yield stress, to a power law response and finally to Newtonian behavior.
Discovery of an Inhibitor of Z-Alpha1 Antitrypsin Polymerization
Polymerization of the Z variant alpha-1-antitrypsin (Z-α1AT) results in the most common and severe form of α1AT deficiency (α1ATD), a debilitating genetic disorder whose clinical manifestations range from asymptomatic to fatal liver and/or lung disease. As the altered conformation of Z-α1AT and its attendant aggregation are responsible for pathogenesis, the polymerization process per se has become a major target for the development of therapeutics. Based on the ability of Z-alpha 1AT to aggregate by recruiting the reactive center loop (RCL) of another Z-α1AT into its s4A cavity, we developed a high-throughput screening assay that uses a modified 6-mer peptide mimicking the RCL to screen for inhibitors of Z-α1AT polymer growth. We used a subset of compounds from the Library of Pharmacologically Active Compounds (LOPAC) with molecular weights ranging from 300 to 700 Da, to evaluate the assay's capabilities. The inhibitor S-(4-nitrobenzyl)-6-thioguanosine was identified as a lead compound and its ability to prevent Z-α1AT polymerization confirmed by secondary assays. In order to further investigate the binding location of S-(4-nitrobenzyl)-6-thioguanosine, an in silico strategy was pursued and the intermediate alpha 1AT M* state modeled to allow molecular docking simulations and explore various potential binding sites. Docking results predict that S-(4-nitrobenzyl)-6-thioguanosine can bind at the s4A cavity and at the edge of beta-sheet A. The former binding site would directly block RCL insertion whereas the latter site would prevent beta-sheet A from expanding between s3A/s5A, and thus indirectly impede RCL insertion. Our investigations have revealed a novel compound that inhibits the formation of Z-α1AT polymers, as well as in vitro and in silico strategies for identifying and characterizing additional blocking molecules of Z-α1AT polymerization.
MST-7 Engineered Materials Group Overview [Slides]
MST-7 applies Science and Engineering at the interface between discovery science and applied implementation. MST-7 is currently composed of 4 teams: (1) Materials Performance & Characterization – performs analysis of materials and is a pipeline for students; (2) Applied polymers - studies fabrication and aging of Directed Stockpile materials; (3) Thin Films & Coatings – maintains coating capabilities for a range of materials (CVD/PVD); and (4) Target Engineering – Designs and fabricates targets for Inertially Confined Fusion/High Energy Density Physics.
Time-Temperature-Stress Superposition of PBX 9502 Compressive Creep Data for Lifetime Predictions
The plastic-bonded explosive (PBX) 9502 is a viscoelastic, high-solids loaded polymer bound composite comprised of 95 weight% (wt%) TATB explosive crystals and 5 wt% FK-800 polymer binder. The uniaxial quasi-static mechanical properties have been studied and characterized extensively over 25+ years, including creep. Creep is the strain evolution over time as a result of an asymmetric load typically at temperatures above ambient. Creep measurements to failure can take excessively long periods of time depending on various factors including applied stress, temperature, and loading rate that render a single test to failure impossible. Using the principles of time-temperature-stress superposition (TTSSP), short-term creep tests at various applied stresses and temperatures can be used for long-term creep predictions. The TTSSP model shifts short-term test data using two factors, one for temperature and stress, creating a master curve at a reference test condition. The master curve can be shifted to predict the creep response at any desired test condition. PBX 9502 compression specimens were tested at three temperatures and various applied stresses. This work discusses the TTSSP analysis of PBX 9502 compressive creep data to create a single comprehensive master curve.
Relative toxicity of pyrolysis products of some cellular polymers
Twelve samples of cellular polymers were evaluated in the course of developing test methods for toxic materials characterization. Six samples were flexible polyurethane foams, three were rigid polyurethane foams, two were high density rigid foams, and one was a modified polyimide foam. Some effects of formulation variables are discussed.
Materials and techniques for spacecraft static charge control
An overview of the design, development, fabrication, and testing of transparent conductive coatings and conductive lattices deposited or formed on high resistivity spacecraft dielectric materials to obtain control static charge buildup on spacecraft external surfaces is presented. Fabrication techniques for the deposition of indium/tin oxide coatings and copper grid networks on Kapton and FEP Teflon films and special frit coatings for OSR and solar cell cover glasses are discussed. The techniques include sputtering, photoetching, silkscreening, and mechanical processes. A facility designed and built to simulate the electron plasma at geosynchronous altitudes is described along with test procedures. The results of material characterizations as well as electron irradiation aging effects in this facility for spacecraft polymers treated to control static charge are presented. The data presents results for electron beam energies up to 30 kV and electron current densities of 30 nA/cm squared. Parameters measured include secondary emission, surface leakage, and through the sample currents as a function of primary beam energy and voltage.
Processable Aromatic Polyimide Thermoplastic Blends
Method developed for preparing readily-processable thermoplastic polyimides by blending linear, high-molecular-weight, polyimic acid solutions in ether solvents with ultrafine, semicrystalline, thermoplastic polyimide powders. Slurries formed used to make prepregs. Consolidation of prepregs into finsihed composites characterized by excellent melt flow during processing. Applied to film, fiber, fabric, metal, polymer, or composite surfaces. Used to make various stable slurries from which prepregs prepared.
Mechanical Behavior of a Hi-Nicalon(tm)/SiC Composite Having a Polycarbosilane Derived Matrix
Polymer infiltration of a rigidized preform, followed by pyrolysis to convert the polymer to a ceramic, potentially offers a lower cost alternative to CVD. It also offers more moderate temperature requirements than melt infiltration approaches, which should minimize potential fiber damage during processing. However, polymer infiltration and pyrolysis results in a more microcracked matrix. Preliminary mechanical property characterization, including elevated temperature (1204 C) tensile, 500 h stress rupture behavior and low cycle fatigue, was conducted on Hi-Nicalon (TM)/Si-C-(O) composites having a dual layer BN/SiC interface and a matrix derived by impregnation and pyrolysis of allylhydridopolycarbosilane (AHPCS). Microstructural evaluation of failure surfaces and of polished transverse and longitudinal cross sections of the failed specimens was used to identify predominant failure mechanisms. In stress rupture testing at 1093 C, the failure was interface dominated, while at 1204 C in both stress rupture and two hour hold/fatigue tests failure was matrix dominated, resulting in specimen delamination.