Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development of the INL Thermal Energy Distribution System (TEDS) in the Modelica Eco-System for Validation and Verification

This report provides an overview on the development of the Thermal Energy Distribution System (TEDS) in the Modelica process model eco-system at Idaho National Laboratory as part of the integrated energy system initiative. Model development has led to the creation of a dynamic process model of the experimental TEDS facility housed within the Engineering Science Laboratory (ESL) at INL. The model was then used during the pre-construction phase of the experimental effort to inform experimental design (insulation requirements, bypass line placement, expected performance of components) and to test innovative control schemes prior to the initial operation. The TEDS model developed in Modelica includes the primary components of the TEDS experimental unit including: a 200kW Chromalox heater, a single-tank packed bed thermal energy storage system filled with 0.125 inch Alumina (Al 2 O 3 ), an ethylene-glycol to Therminol-66 heat exchanger, system piping, six control valves, and all associated temperature, pressure, and mass flow sensors. The model does not include nitrogen fill gas tanks, or associated overfill tanks, as these are not part of standard system control. Two simulation sets were run. The first is a five-hour test that operates as a shakedown test for the facility. This simulation puts the facility through all five potential operating modes and showcases the ability of valving, control sensors, and component controllers to meet the system demands. The second case imposes a typical summer day demand on the system from a region with mixed commercial and residential electrical needs where the generator alone cannot meet peak demand but instead requires the thermal storage unit to act as a peaking unit. Over the course of the fifteen-hour discharge cycle heat losses account for a heat loss of approximately 15°C in outlet temperature. Such heat losses would lead to a decrease in overall system efficiency and may lead to additional design changes for such designs in the future that may include a topping heater. Through commencement of this work, a systems level model of TEDS with associated control systems, sensors, piping diameters, and component capabilities has been created. This model has been utilized in the pre-experimental phase to inform system design, insulation thicknesses, and potential control schemes to operate the system effectively and safely. Once TEDS begins operation, this model will be refined, tuned, and used for validation and verification purposes.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

An Assessment of the Safeguards Implications of Particle and Alloy Formation in MSRs

Molten salt reactors (MSRs) present unique challenges for applying safeguards measures and differ significantly from traditional nuclear reactors. Although the special fissionable materials within MSRs principally exist as dissolved species within the fuel salt, key actinides of interest may also be converted to solid phases including alloys and precipitated oxides via chemical and electrochemical reactions. These solid-phase components will complicate the nuclear material accounting and control (NMAC) approaches that have, so far, primarily targeted measurements of the liquid salt itself. For example, most of the proposed monitoring and characterization methods for MSRs are reliant on homogeneity of the salt and the ability to maintain accountable materials in solution. Solid deposits and particulates could invalidate the assumption of homogeneity and necessitate the use of new models and measurement tools to permit a full accounting of all nuclear material in an MSR. To address this, the likelihood of solids formation in MSRs, estimated the rate at which these solids could form, and assessed the monitoring tools that are available to account for the presence of these materials were examined. Specifically, three solid forming mechanisms were investigated, including (1) the accumulation of actinides within the MSR’s structural materials due to alloying, (2) the accumulation of actinides within noble metal fission product particulates, and (3) the generation of actinide oxides from interactions with salt impurities. These modeling-informed studies were completed with considerations to both fluoride- and chloride-containing salts. It was determined that, although measurable amounts of special fissionable material were expected to alloy with the structural elements and fission products, the predicted amounts were below levels considered as significant quantities (SQ) by the International Atomic Energy Agency (IAEA). However, it was determined that sufficiently large oxygen concentrations could potentially lead to significant quantities of special fissionable material being converted to solid oxide phases. As such, a comparative study of technologies that are commercially available to assist in monitoring and accountancy of this material was presented. Policy implications, design recommendations, and suggestions for follow-on experimental work were also presented to further assist reactor vendors in designing and controlling the fuel salt chemistry to address potential safeguards considerations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Robust multi‐loop control of a floating wind turbine

Abstract A principal challenge facing the control of floating offshore wind turbines (FOWTs) is the problem of instability, or “negative damping,” when using blade pitch feedback to control generator speed. This closed‐loop instability can be attributed to non‐minimum phase zeros in the transfer function from blade pitch to generator speed. Standard approaches to improving stability and performance include robust tuning of control gains and introducing multiple feedback loops to respond to platform motion. Combining these approaches is nontrivial because multiple control loops complicate the impact of coupling in the system dynamics. The single‐loop approach to analyzing stability robustness neglects inter‐loop coupling, while a simplistic multi‐loop approach is highly sensitive to dimensional scaling and overestimates the robustness of the single‐loop controller. This work proposes a sensitivity representation that separates some of the natural FOWT dynamic coupling into a parallel feedback loop in the sensitivity function loop to address both of these concerns. The modified robustness measure is used with a simplified linear FOWT model to optimize scheduled multi‐loop control parameters in an automated tuning procedure. This controller is implemented for the 10‐MW Ultraflexible Smart FLoating Offshore Wind Turbine (USFLOWT) and compared against conventional single‐ and multi‐loop controllers tuned using frequency‐domain analysis and high‐fidelity OpenFAST simulations. The multi‐loop robust controller shows the highest overall performance in generator speed regulation and tower load reduction, though consideration of power quality, actuator usage, and other structural loading leads to additional trade‐offs.

Stockhouse, David↗
DOE OSTI2022

A Top-Down Strategy to Engineer ActiveLayer Morphology for Highly Efficient and Stable All-Polymer Solar Cells

A major challenge hindering the further development of all-polymer solar cells (all-PSCs) employing polymerized small-molecule acceptors is the relatively low fill factor (FF) due to the difficulty in controlling the active-layer morphology. The issues typically arise from oversized phase separation resulting from the thermodynamically unfavorable mixing between two macromolecular species, and disordered molecular orientation/packing of highly anisotropic polymer chains. Herein, a facile top-down controlling strategy to engineer the morphology of all-polymer blends is developed by leveraging the layer-by-layer (LBL) deposition. Optimal intermixing of polymer components can be achieved in the two-step process by tuning the bottom-layer polymer swelling during top-layer deposition. Consequently, both the molecular orientation/packing of the bottom layer and the molecular ordering of the top layer can be optimized with a suitable top-layer processing solvent. A favorable morphology with gradient vertical composition distribution for efficient charge transport and extraction is therefore realized, affording a high all-PSC efficiency of 17.0% with a FF of 76.1%. The derived devices also possess excellent long-term thermal stability and can retain >90% of their initial efficiencies after being annealed at 65 °C for 1300 h. In conclusion, these results validate the distinct advantages of employing an LBL processing protocol to fabricate high-performance all-PSCs.

14 SOLAR ENERGY↗
DOE OSTI2023

Engineering structural homogeneity and magnetotransport in strained Nd 2 Ir 2 O 7 films

The 5d pyrochlore iridate family (R 2 Ir 2 O 7 , where R is a rare earth ion) has garnered significant attention due to its topological properties, such as Weyl semimetallic phases and axion insulator. However, the investigation of these properties has been impeded by severe iridium loss during growth, which results in the formation of defects and impurities. Herein, we demonstrate a method for controlling impurities and defects in strained Nd 2 Ir 2 O 7 (NIO-227) films by compensating for iridium loss during growth. By increasing the amount of IrO 2 target ablated, we enhance the morphological quality and electrical transport properties of the fabricated films. Furthermore, our results show that the anomalous Hall effects of the films have a strong dependency on the amount of IrO 2 target ablated, which is attributed to the structural inhomogeneity in the NIO-227 films. Our work provides a way to control defects and impurities and would promote the investigation of topological phases in the family R 2 Ir 2 O 7 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dynamic re-equilibration controlled multi-step transformations in (Mn, Fe) 2 (P, Si) alloys

In (Mn, Fe) 2 (P, Si) alloys crystallographic first-order phase transformations enable strong coupling of magnetic and entropic properties, potentially leading to high-efficiency energy generation and refrigeration applications. Although hysteresis losses that limit these applications can be reduced through careful control of alloy composition, compositional tuning can also unfavorably influence transformation temperatures and magnetocaloric coupling strength. Hence, exploration of additional processing variables enabling independent control of transformation properties is crucial. In this work, we investigate the role of thermal history as an additional processing variable, exploiting thermally-activated mechanisms to control properties of non-diffusive transformations in (Mn, Fe) 2 (P, Si) alloys. In so doing, we report an unusual transformation-splitting phenomenon following annealing at intermediate times, where a single well-defined magneto-structural transformation evolves towards a multi-step transformation with individual steps occurring at multiple distinct temperatures. Here, on longer annealing at the same temperatures, single-step transformation behavior is recovered. Through additional magnetic and crystallographic characterization, we show that the thermal history-controlled multi-step behavior results from sluggish thermally-activated diffusion. The two-step transformation corresponds to non-equilibrium bimodal composition distributions in the transforming phase, and these develop through a dynamic re-equilibration process as the alloy passes relatively slowly between different thermal equilibria. Together, these results suggest that thermal history primarily controls the transformation properties of (Mn, Fe) 2 (P, Si) alloys indirectly through the composition of one or more transforming phases. Additional investigations are needed to develop thermal history processing for decoupling hysteresis control from other transformation properties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Determining Key Factors for the Open-Loop Control of Molecular Fragmentation Using Shaped Strong Fields

Pulse shaping has long been employed for tailoring femtosecond laser pulses to study and control the fragmentation of polyatomic molecules. In many cases, a physical explanation connecting the properties of the field to the observed control is difficult to ascertain. We utilized 80 bit binary spectral phase functions to parametrize and map the search space, gaining insight into which pulse parameters most impact the ion yield and fragmentation pattern for the relatively large triethylamine [N(C 2 H 5 ) 3 ] molecule. Pulse structures used to control the m/z 86 branching ratio beyond a simple intensity dependence are identified and compared to pump–probe results. All of these findings are explained in terms of control via a dissociative Rydberg state in the neutral molecule. This methodology may be used to discover new control mechanisms and shed light onto which pulse parameters most influence the interaction between strong field lasers and matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Topological Defect Mediated Helical Phase Reorientation by Uniaxial Stress

Strain engineering enables precise, energy-efficient control of nanoscale magnetism. However, unlike well-studied strain-dislocation interactions in mechanical deformation, the spatial evolution of strain-induced spin rearrangement remains poorly understood. Using Lorentz transmission electron microscopy, we manipulate and observe helical domain reorientation under quantitatively applied uniaxial tensile stress. Our findings reveal striking similarity to plastic deformation in metals, where the critical stress for propagation vector ( Q ) reorientation depends on its angle with the stress direction. Magnetic defects mediate reorientation via “break-and-reconnect” or “dislocation gliding–annihilation” processes. Simulations confirm that strain-induced anisotropic Dzyaloshinskii-Moriya interaction may play a key role. These insights advance strain-driven magnetism and offer a promising route for energy-efficient magnetic nanophase control in next-generation information technology. Published by the American Physical Society 2025

36 MATERIALS SCIENCE↗
DOE OSTI2020

Architecture-Based Control of Temperature Gradient-Driven Water Transport in Polymer Electrolyte Fuel Cells

Temperature gradients can move water within the porous media of a polymer electrolyte fuel cell through phase-change-induced (PCI) flow. It is critical to understand PCI flow so that control and distribution of water within a fuel cell can be accomplished. This work investigates the role of architecture, specifically anode land width, on overall cell water content and distribution in the through-plane direction. A specially-designed 4.8 cm 2 fuel cell with precise thermal boundary conditions was imaged with neutrons using two different anode flow field configurations. A new, non-dimensional thermal transport number was developed which quantifies the relative influence of PCI flow on cell water transport. It was found that anode lands larger than the cathode lands cause large thermal gradients that instigate net water flux from the cathode to the anode. An asymmetric configuration with larger anode lands was found to have large changes in water content that were strongly sensitive to cell operating conditions. The thermal transport number developed here enables deduction of the net flux condition based on operating conditions and architecture. This approach enables design of high-performance systems with balanced water management.

25 ENERGY STORAGE↗
DOE OSTI2024

High-dimensional maximum-entropy phase space tomography using normalizing flows

Particle accelerators generate charged-particle beams with tailored distributions in six-dimensional position-momentum space (phase space). Knowledge of the phase space distribution enables model-based beam optimization and control. In the absence of direct measurements, the distribution must be tomographically reconstructed from its projections. In this paper, we highlight that such problems can be severely underdetermined and that entropy maximization is the most conservative solution strategy. We leverage —invertible generative models—to extend maximum-entropy tomography to six-dimensional phase space and perform numerical experiments to validate the model's performance. Our numerical experiments demonstrate consistency with exact two-dimensional maximum-entropy solutions and the ability to fit complicated six-dimensional distributions to large measurement sets in reasonable time. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Grain boundary zirconia-modified garnet solid-state electrolyte

Here, we report a method for promoting electrochemical stability in garnet Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 solid-state electrolyte based on a composite two-phase oxide–oxide microstructure. Grain boundary precipitation of the controlled distribution of amorphous zirconium oxide microparticles is achieved through the addition of reactive tantalum carbide. During ambient-atmosphere sintering, the carbide decomposes through an in situ reaction, the ‘extra’ Ta substituting for Zr within the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 lattice. Density functional theory (DFT) calculations identify a thermodynamically favourable reaction path and show how substituting Ta 5+ at Zr 4+ sites affects the crystal structure as well as bulk ionic and electronic conductivities. Quantitative stereology highlights that zirconia also acts as a sintering aid, reducing compact porosity. Cryogenic focused-ion-beam scanning electron microscopy and fractography analysis of cycled solid-state electrolytes illustrates that near-universally observed intergranular Li-metal dendrite propagation is suppressed by the two-phase microstructure, favouring transgranular dendrites instead. Importantly, DFT demonstrates that compared with the Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 surface, the zirconium oxide surface per se is less electronically conductive and does not trap excess electrons to reduce Li ions. This is a key reason for the substantial improvement in the electrochemical properties over the single-phase baseline.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hybrid-Lipid Bilayers Induce n -Alkyl-Chain Order in Reversed-Phase Chromatographic Surfaces, Impacting their Shape Selectivity for Aromatic Hydrocarbon Partitioning

Shape selectivity is important in reversed-phase liquid chromatographic separations, where stationary phases are capable of separating geometric isomers, thereby resolving solutes based on their three-dimensional structure or shape rather than other chemical differences. Numerous chromatographic studies have been carried out using n-alkyl-chain-modified columns to understand how molecular shape affects retention. For polycyclic aromatic hydrocarbons (PAHs), it was found that planar compounds were selectively retained over non-planar structures of comparable molecular weight on surfaces with longer n-alkyl chains, higher chain-density, or at lower temperatures, where selectivity likely arises with greater ordering of the n-alkyl chains. A limitation of these studies, however, is the small range of chain ordering that can be achieved and lack of a direct measure of the n-alkyl-chain order of the stationary phases. In this work, we employ a C 18 stationary phase modified with a monolayer of phospholipid as a means of significantly varying the n-alkyl chain order. These hybrid-supported lipid bilayers, which have previously been employed as membrane-like stationary phases for measuring lipophilicity, provide a unique approach to control n-alkyl chain ordering by varying the acyl chain length and degree of unsaturation of the phospholipid modifier. The degree of alkyl-chain order of the resulting modified surfaces is determined from the ratio of trans- versus gauche-conformers, measured in situ within individual porous particles by confocal Raman microscopy. This methodology was also used to assess the affinity of these surfaces for planar versus non-planar PAH molecules. The retention selectivity for the planar versus non-planar compounds, thus determined, was found to vary significantly and systematically with the degree of order of the acyl/alkyl chains in the hybrid-supported lipid bilayers. Furthermore, the investigation also demonstrates the utility of confocal Raman microscopy for interrogating the impact of solute partitioning on stationary-phase structure within porous chromatographic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

DER Inverter Control Fault Ride Through Model in Accordance with IEEE 1547-2018 Std

Distributed Energy Resources (DER) with smart inverters are becoming more prevalent as the need for renewable energy and grid stability increases. An important challenge arises when considering that inverterbased generation methods contribute less current during faults, rendering traditional overcurrent protection unsatisfactory. DERs have fault ride-through requirements when operating in high or low voltage, outlined by IEEE Std. 1547-2018. Faults cause the voltage to reach abnormal steady state magnitudes, depending on the fault resistance and fault type. There are several high voltage and low voltage ride-through zones defined by IEEE Std. 1547-2018. Each zone’s ride through duration decreases as the applicable voltage measurement, i.e., the phase RMS voltage, deviates from its nominal value. This presentation demonstrates the implementation of IEEE Std. 1547-2018 high and low voltage ridethrough grid support functions using a preexisting RSCAD model, discussing the challenges presented during this process. The implemented controls monitor the filtered phase voltages to have a more accurate reading of the applicable voltages. The controls sense the duration that the applicable voltage remains in a specific zone. The breaker trips and ceases energization to the grid when the duration is exceeded. The standard allows the operator to adjust the ride-through times and voltage zones from the default settings. These ranges are implemented into the runtime, which acts as the operator’s SCADA. The results show the accuracy of the voltage measurements, which remain within the IEEE Std. 1547-2018 for all cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Effects of input gradient regularization on neural networks time-series forecasting of thermal power systems

This study proposes using neural networks, specifically gated recurrent unit (GRU), long-short-term memory (LSTM), and transformer networks, to improve control strategies in a 450 MW coal-fired power plant. However, neural networks face issues of becoming overly dependent on just a few variables to make predictions, which negatively impacts control decisions that rely on the model to determine the value of all manipulated variables. The paper introduces regularization techniques, including noise injection and input gradient regularization, during the training phase. Here, the work presents novel contributions in adapting neural networks to control industrial systems and applying regularization techniques from computer vision to industrial process control. Results demonstrate the effectiveness of input gradient regularization in reducing model dependence on subsets of variables, emphasizing the balance between fidelity and controllability. Further exploration is recommended, including the development of recurrent transformers, closed-loop control testing, and a sensitivity analysis on computer models to provide further insight.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Template-independent enzymatic synthesis of RNA oligonucleotides

Abstract RNA oligonucleotides have emerged as a powerful therapeutic modality to treat disease, yet current manufacturing methods may not be able to deliver on anticipated future demand. Here, we report the development and optimization of an aqueous-based, template-independent enzymatic RNA oligonucleotide synthesis platform as an alternative to traditional chemical methods. The enzymatic synthesis of RNA oligonucleotides is made possible by controlled incorporation of reversible terminator nucleotides with a common 3′-O-allyl ether blocking group using new CID1 poly(U) polymerase mutant variants. We achieved an average coupling efficiency of 95% and demonstrated ten full cycles of liquid phase synthesis to produce natural and therapeutically relevant modified sequences. We then qualitatively assessed the platform on a solid phase, performing enzymatic synthesis of severalN + 5 oligonucleotides on a controlled-pore glass support. Adoption of an aqueous-based process will offer key advantages including the reduction of solvent use and sustainable therapeutic oligonucleotide manufacturing.

Biotechnology & Applied Microbiology↗
DOE OSTI2025

Nanoscale modulation of flat bands via controllable charge density wave defects in 4⁢𝐻⁡𝑏−Ta⁢S 2

Electron correlation is a main driver of exotic quantum phases and their interplay. The 4H b-TaS 2 system, possessing an intrinsic heterostructure of 1T- and 1H -TaS 2 monolayers, offers a unique opportunity to control electron correlation by distorting the atomic lattice or tuning interlayer coupling. Here, we investigated intrinsically deformed charge-density waves (CDWs) in the 1T layer of 4H b-TaS 2 to elucidate and control their effects on flat bands using scanning tunneling microscopy and spectroscopy (STM/S) combined with first-principles calculations. We identified two types of CDW defects: Type 1 has structural distortion and locally suppressed flat bands, while Type 2 features an increased flat band filling factor of intact CDW structure. Density functional theory calculations indicate that a sulfur vacancy in the 1T layer distorts the CDW structure and gives rise to a Type 1, whereas a sulfur vacancy in the 1H layer reduces the interlayer charge transfer and leads to a Type 2. Furthermore, we demonstrated creating and erasing individual CDW defects via STM manipulation. Here, our findings provide a pathway to not only tune flat bands but also selectively manipulate the interaction between CDW, the atomic lattice, and interlayer coupling in strongly correlated systems with atomic precision.

Charge density waves↗
DOE OSTI2022

Determining the kinetic rate constants of Fe 3 O 4 -to-Fe and FeO-to-Fe reduction by H 2

Steel production using coal accounts for ~ 8% of global carbon emissions. “Green Steel” is a new grand concept proposed recently to make steel from iron ores using renewable derived “Green Hydrogen” to achieve zero carbon emission. The kinetics and rate-limiting steps of iron ore reduction into iron with H 2 as a reducing agent is critically important to the success of this new technology. While reduction of Fe 2 O 3 into Fe by H 2 follows multiple steps, the past research on this topic mainly deals with the overall averaged kinetics, giving little information on the elemental and rate-limiting steps. In this work, we report a kinetic study specifically design to attain kinetic rate constants of one-step reduction of Fe 3 O 4 -to-Fe and FeO-to-Fe. Guided by thermodynamics, we show first how to create in situ the desirable starting oxide phases, i.e., Fe 3 O 4 and FeO, with precisely controlled the ratio of partial pressures of H 2 O and H 2 . We then show time-dependent raw H 2 O content data collected by a mass spectrometer and the processed reduction data to extract kinetic rate constants. We found that the kinetics of the two one-step reduction reactions follows nicely the Johnson-Mehl-Avrami (JMA) phase transformation model. The one-step reduction mechanisms and activation energy are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗