Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

MX precipitate behavior in an irradiated advanced Fe-9Cr steel: Self-ion irradiation effects on phase stability

In an effort to optimize Fe-9Cr reduced activation ferritic/martensitic (RAFM) steels and to inform the design and operation of fusion reactors, this work represents the first in a series of cohesive studies dedicated to the evolution of MX-TiC precipitates under accelerated single and dual ion irradiations. This study investigates CNA9, a simplified Fe-9Cr RAFM steel featuring initial MX-TiC precipitate densities of (2.3±0.3)×10²¹ m⁻³. This material was subjected to single self-ion irradiation at damage levels ranging from 1 to 100 displacements per atom (dpa) over a temperature range of 300 to 600°C, with a nominal dose rate of 7×10⁻⁴ dpa/s. Irradiation-induced coarsening was observed, as evidenced by statistically significant increases in mean diameter sizes, at 15 dpa at both 500°C and 600°C, whereas no coarsening was noted at 300°C or 400°C. Further, complete dissolution of precipitates occurred at damage levels of 50 and 100 dpa across the two temperatures tested (300°C and 500°C) while no significant changes were observed at any doses below 15 dpa at 500°C. Experimentally parameterized recoil resolution modeling suggests that the observed radiation stability of MX-TiC precipitates is intricately linked to diffusional changes of solutes resulting from the co-evolution of microstructural features within the experiments. The findings align with current theoretical perspectives on radiation-induced precipitate stability in complex alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microstructure investigations of temperature effect on Al-UMo diffusion couples irradiated by swift Xe ions

Post-irradiation examination (PIE) results of microstructure in irradiated Al-UMo diffusion couples are reported here. These diffusion couples were irradiated by 60 MeV Xe ions at four different temperatures up to approximately 5.5 × 10 17 ions/cm 2 peak ion fluence. An Al-UMo interaction layer (IL) was found to form at all four investigated temperatures. The IL is homogeneously amorphous when formed up to 150 °C. At 215 °C, the (U,Mo)Al 3 nanocrystalline precipitates form within the amorphous IL matrix. Kirkendall voids with prominent temperature dependence were observed in both the Al layer and its interface with the IL. On the other hand, Xe bubbles were found to form in UMo and Al-UMo IL with different morphology. These microstructure features were quantitatively measured and are reported to provide valuable references for understanding the irradiation behavior of UMo/Al dispersion fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Solitons of the symmetric $ϕ^4 − ϕ^2 |ϕ| − ϕ^2$ triple well model

A symmetric $ϕ^4 − ϕ^2 |ϕ| − ϕ^2$ model has recently attracted attention due to its usefulness in studying tunable phase transitions. Here, we analyze the behavior of this model for the entire range of parameters and obtain its kink and pulse solutions. For completeness, we also present several periodic solutions of this model. Furthermore, we present a generalized symmetric $ϕ^{4n} − ϕ^{2n} |ϕ| − ϕ^2$ model where $n = 1, 2, 3, ...$ and obtain its kink and pulse solutions for arbitrary $n$.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Mixing and detonation structure in a rotating detonation engine with an axial air inlet

High-fidelity simulations of an experimental rotating detonation engine with an axial air inlet were conducted. The system operated with hydrogen as fuel at globally stoichiometric conditions. Instantaneous data showed that the detonation front is highly corrugated, and is considerably weaker than an ideal Chapman–Jouguet wave. Regions of deflagration are present ahead of the wave, caused by mixing with product gases from the previous cycle, as well as the injector recovery process. It is found that as the post-detonation high pressure flow expands, the injectors recover unsteadily, leading to a transient mixing process ahead of the next cycle. The resulting flow structure not only promotes mixing between product and reactant gases, but also increases likelihood of autoignition. These results show that the detonation process is very sensitive to injector design and the transient behavior during the detonation cycle. Phase-averaged statistics and conditionally averaged data are used to understand the overall reaction structure. As a result, comparisons with available experimental data on this configuration show remarkable good agreement of the predicted reacting flow structure.

42 ENGINEERING↗
DOE OSTI2022

Chemistry, Structure, and Function of Lone Pairs in Extended Solids

The lone pair has been a known feature of the electronic structure of molecules for over 100 years. Beginning with the pioneering work of Lewis and others that was later developed into useful guidelines for predicting molecular structure, lone pairs and their steric consequences are now taught at the very earliest stages of a chemistry education. In the crystalline solid state, lone pairs have perhaps had a less visible yet equally consequential role, with a significant impact on a range of properties and functionalities. Important properties associated with s 2 electron-derived lone pairs include their role in creating conditions favorable for ion transport, in the formation and correlation of local dipoles and the resulting polar behavior leading to ferroics and multiferroics, in increasing the refractive index of glass, in reducing the thermal conductivity of thermoelectric materials, and in breaking local symmetry permitting second-harmonic light generation.. In recent years, the role of the lone pair in developing the electronic structure of some topological quantum materials has also been recognized. While structural distortions due to lone pairs have traditionally been characterized through their crystallography, recent advances in scattering and spectroscopy have revealed the presence of local lone pair-driven distortions that do not correlate over long length scales. The role of these crystallographically “hidden” lone pairs, their detection, and their impact on properties have become a growing body of work in the literature. Hidden lone pairs are an effective argument for considering a role for lone pairs that goes beyond their being objects that occupy space in the coordination polyhedra of cations. This Account introduces the chemistry of lone pairs in extended crystalline solids, including a discussion of when they are stereochemically active, how they manifest in the structure, and how their chemistry can be tuned by the chemical environment around them. Eventually, all of these factors work in unison to help develop and tune properties of interest. Certain specific examples of structure–property relationships in materials that are driven by lone pair behavior are described here, including the potential impact of lone pairs on the optical and electronic properties of hybrid halide perovskite compounds that are relevant to their photovoltaic applications. Here, we highlight the role of lone pairs in the dielectric behavior of geometrically frustrated pyrochlores, the temperature-dependent optoelectronic behavior of halide perovskites, the polar phase transitions in lead-free ferroelectric perovskites, and the compositional insulator-to-metal transition in ruthenium pyrochlores. The theme underpinning this Account is that the lone pair can be considered to be a powerful design element for a broad range of material function.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Low-Temperature 2D/2D Ohmic Contacts in WSe 2 Field-Effect Transistors as a Platform for the 2D Metal–Insulator Transition

in this work, we report the fabrication of hexagonal-boron-nitride (hBN) encapsulated multiterminal WSe 2 Hall bars with 2D/2D low-temperature Ohmic contacts as a platform for investigating the two-dimensional (2D) metal-insulator transition. We demonstrate that the WSe 2 devices exhibit Ohmic behavior down to 0.25 K and at low enough excitation voltages to avoid current-heating effects. Additionally, the high-quality hBN-encapsulated WSe 2 devices in ideal Hall-bar geometry enable us to accurately determine the carrier density. Measurements of the temperature (T) and density (n s ) dependence of the conductivity σ(T, n s ) demonstrate scaling behavior consistent with a metalinsulator quantum phase transition driven by electron-electron interactions, but where disorder-induced local magnetic moments are also present. Our findings pave the way for further studies of the fundamental quantum mechanical properties of 2D transition metal dichalcogenides using the same contact engineering.

2D materials↗
DOE OSTI2022

Annihilating Actinic Photochemistry of the Pyruvate Anion by One and Two Water Molecules

Photochemical behaviors of pyruvic acid in multiple phases have been extensively studied, while those of its conjugate base, the pyruvate anion (CH 3 COCOO – , PA – ) are less understood and remain contradictory in gaseous versus aqueous phases. Here in this article, we report a joint experimental and theoretical study combining cryogenic, wavelength-resolved negative ion photoelectron spectroscopy (NIPES) and high-level quantum chemical computations to investigate PA – actinic photochemistry and its dependence on microsolvation in the gas phase. PA – ·nH 2 O (n = 0–5) clusters were generated and characterized, with their low-lying isomers identified. NIPES conducted at multiple wavelengths across the PA – actinic regime revealed the PA – photochemistry extremely sensitive to its hydration extent. While bare PA – anions exhibit active photoinduced dissociations that generate the acetyl (CH 3 CO – ), methide (CH 3 – ) anions, their corresponding radicals, and slow electrons, one single attached water molecule results in significant suppression with a subsequent second water being able to completely block all dissociation pathways, effectively annihilating all PA – photochemical reactivities. Further, the underlying dissociation mechanisms of PA – ·nH 2 O (n = 0–2) clusters are proposed involving nπ* excitation, dehydration, decarboxylation, and further CO loss. Since the photoexcited dihydrate does not have sufficient energy to overcome the full dehydration barrier before PA – could fragmentate, the PA – dissociation pathway is completely blocked, with the energy most likely released via loss of one water and internal electronic and vibrational relaxations. The insight unraveled in this work provides a much-needed critical link to connect the seemingly conflicting PA – actinic chemistry between the gas and condensed phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Momentum dependent $d_{xz/yz}$ band splitting in LaFeAsO

The nematic phase in iron based superconductors (IBSs) has attracted attention with a notion that it may provide important clue to the superconductivity. A series of angle-resolved photoemission spectroscopy (ARPES) studies were performed to understand the origin of the nematic phase. However, there is lack of ARPES study on LaFeAsO nematic phase. Here, we report the results of ARPES studies of the nematic phase in LaFeAsO. Degeneracy breaking between the d xz and d yz hole bands near the Γ and M point is observed in the nematic phase. Different temperature dependent band splitting behaviors are observed at the Γ and M points. The energy of the band splitting near the M point decreases as the temperature decreases while it has little temperature dependence near the Γ point. The nematic nature of the band shift near the M point is confirmed through a detwin experiment using a piezo device. Since a momentum dependent splitting behavior has been observed in other iron based superconductors, our observation confirms that the behavior is a universal one among iron based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Self-regulated growth of candidate topological superconducting parkerite by molecular beam epitaxy

Ternary chalcogenides, such as parkerites and shandites, are a broad class of materials exhibiting a rich diversity of transport and magnetic behavior and an array of topological phases, including Weyl and Dirac nodes. However, they remain largely unexplored as high-quality epitaxial thin films. Here, we report the self-regulated growth of thin films of the strong spin–orbit coupled superconductor Pd 3 Bi 2 Se 2 on SrTiO 3 by molecular beam epitaxy. Films are found to grow in a self-regulated fashion, where, in excess Se, the temperature and relative flux ratio of Pd to Bi control the formation of Pd 3 Bi 2 Se 2 due to the combined volatility of Bi, Se, and Bi–Se bonded phases. The resulting films are shown to be of high structural quality, and the stoichiometry is independent of the Pd:Bi and Se flux ratio and exhibits a superconducting transition temperature of 800 mK and a critical field of 17.7 ± 0.5 mT, as probed by transport and magnetometry. Understanding and navigating the growth of the chemically and structurally diverse classes of ternary chalcogenides open a vast space for discovering new phenomena and enabling new applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Mechanistic aspects of plasma-enhanced catalytic methane decomposition by time-resolved operando diffuse reflectance infrared Fourier transform spectroscopy

To study mechanistic aspects of plasma-enhanced catalysis, methane is decomposed by a supported Ni catalyst assisted by an Ar/O 2 atmospheric pressure plasma jet (APPJ). Here, the time-resolved surface response of the Ni catalyst is investigated by operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) using various experimental settings. Catalyst temperatures of room temperature (RT) and 500 °C and nozzle-catalyst surface distances of 3, 5 and 8 mm were examined, and the amount of O 2 of the Ar/O 2 gas mixture flowing through the APPJ was either 0 or 0.5%. A synergistic effect of surface bonded C-O was observed during the exposure of the Ni catalyst to the APPJ for low oxygen operating conditions (pure Ar jet). Surface bonded C-O formed only when there was plasma present and the C-O signal was enhanced for higher catalyst temperature. When the supported Ni catalyst was subjected to the plasma-generated particle fluxes using highly oxidizing conditions, the presence of surface bonded C-O was suppressed. The plasma-catalytic CO and CO 2 production in the gas phase measured downstream mirrored the surface behavior of C-O bonds when the plasma source operating condition was changed from a low oxygen portion to a high oxygen portion at high catalyst temperature (500 °C). CH n (n =1, 2, ) species on the catalyst surface were also studied by DRIFTS, and CHn destruction was found to correlate with C-O formation. In particular, the time-resolved CH n response showed a possible conversion process of CH n to C-O when the Ni catalyst was exposed to the plasma source. This finding may indicate a plasma-mediated regeneration of the catalyst by plasma-catalyst surface interactions.

42 ENGINEERING↗
DOE OSTI2024

Unconventional fieldlike spin torques in CrPt 3

The topological semimetal CrPt 3 has potential for generating unconventional spin torques due to its ferrimagnetic ordering, topological band structure, and high anomalous Hall effect. CrPt 3 exhibits ferrimagnetic behavior only in its chemically ordered phase and is paramagnetic in its chemically disordered phase. By controlling the growth and annealing temperatures, we prepare epitaxial films of both chemically ordered and chemically disordered phases of CrPt 3 , allowing us to investigate the effect of magnetic ordering on unconventional-torque generation. We use angle-dependent spin-torque-ferromagnetic-resonance and second-harmonic Hall measurements to probe the spin torques generated from epitaxial CrPt 3 in CrPt 3 /Cu/Ni 81 ⁢Fe 19 heterostructures. With current applied along specific directions with respect to the crystal order, we reveal unconventional spin torques in both ordered and disordered films. When current flows parallel to the [$1\bar{1}1$] and [ $\bar{1}11$] directions, we observe an unconventional fieldlike torque that is opposite in sign for the two directions. Finally, our calculations reveal that this unconventional torque originates from an indirect nonlocal spin-orbit torque due to spin scattering at the CrPt 3 /Cu interface, in addition to symmetry breaking at this interface.

ferromagnetic resonance↗
DOE OSTI2020

Many-body localization near the critical point

Here, we examine the many-body localization (MBL) phase transition in one-dimensional quantum systems with quenched randomness and short-range interactions. Following recent works, we use a strong-randomness renormalization group (RG) approach where the phase transition is due to the so-called avalanche instability of the MBL phase. We show that the critical behavior can be determined analytically within this RG. On a rough qualitative level the RG flow near the critical fixed point is similar to the Kosterlitz-Thouless (KT) flow as previously shown, but there are important differences in the critical behavior. Thus, we show that this MBL transition is in a universality class that is different from KT. The divergence of the correlation length corresponds to critical exponent $\textit{ν → ∞}$, but the divergence is weaker than for the KT transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Crystallizing Kagome Artificial Spin Ice

Artificial spin ices are engineered arrays of dipolarly coupled nanobar magnets. They enable direct investigations of fascinating collective phenomena from their diverse microstates. However, experimental access to ground states in the geometrically frustrated systems has proven difficult, limiting studies and applications of novel properties and functionalities from the low energy states. In this work, we introduce a convenient approach to control the competing diploar interactions between the neighboring nanomagnets, allowing us to tailor the vertex degeneracy of the ground states. We achieve this by tuning the length of selected nanobar magnets in the spin ice lattice. We demonstrate the effectiveness of our method by realizing multiple low energy microstates in a kagome artificial spin ice, particularly the hardly accessible long range ordered ground state—the spin crystal state. Our strategy can be directly applied to other artificial spin systems to achieve exotic phases and explore new emergent collective behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Understanding random-walk dynamical phase coexistence through waiting times

We study the appearance of first-order dynamical phase transitions (DPTs) as “intermittent” coexisting phases in the fluctuations of random walks on graphs. We show that the diverging timescale leading to critical behavior is the waiting time to jump from one phase to another. This timescale is crucial for observing the system's relaxation to stationarity and demonstrate ergodicity of the system at criticality. We illustrate these results through three analytical examples which provide insights into random walks exploring random graphs. Published by the American Physical Society 2024

Stuhrmann, David C. (ORCID:0009000726916649)↗
DOE OSTI2020

Oxidation and microstructure of SiC f /SiC composites in moist air up to 1600°C by X‐ray tomographic characterization

Abstract SiC f /SiC composites that possess PyC or BN interface layers were fabricated and then oxidized in moist air at 1000, 1200, 1400, and 1600°C. High‐resolution CT was used for capturing 3D images and quantifying the SiC phase, mesophase, and voids. The oxidation behavior and microstructural evolution of SiC f /SiC with PyC or BN interface are discussed in this study. The microstructure of the SiC f /SiC with a PyC layer was seriously damaged in moist air at high temperature, whereas the BN interface layer enhanced the oxidation resistance of the SiC f /SiC. These results are also confirmed by using XRD, oxidation mass gain, tensile testing, and SEM measurements. The results of the oxidation behavior and microstructural evolution for SiC f /SiC oxidized in dry air are also compared with the results of this study. Comparing the SiC f /SiC with a PyC interface layer, the composite with a BN interface layer oxidized in moist air exhibits a high void growth rate and a low SiO 2 grain growth rate from 1000 to 1600°C. This work will provide guidance for predicting the service life of SiC f /SiC for multiscale damage rate models of materials at a local scale and will also provide guidance on the life service design of SiC f /SiC materials.

Lu, Zilong↗
DOE OSTI2022

Insight of BaCe 0.5 Fe 0.5 O 3– δ twin perovskite oxide composite for solid oxide electrochemical cells

One-pot synthesized twin perovskite oxide composite of BaCe 0.5 Fe 0.5 O 3–δ (BCF), comprising cubic and orthorhombic perovskite phases, shows triple-conducting properties for promising solid oxide electrochemical cells. Phase composition evolution of BCF under various conditions was systematically investigated, revealing that the cubic perovskite phase could be fully/partially reduced into the orthorhombic phase under certain conditions. The reduction happened between the two phases at the interface, leading to the microstructure change. As a result, the corresponding apparent conducting properties also changed due to the difference between predominant conduction properties for each phase. Based on the revealed phase composition, microstructure, and electrochemical properties changes, a deep understanding of BCF's application in different conditions (oxidizing atmospheres, reducing/oxidizing gradients, cathodic conditions, and anodic conditions) was achieved. Triple-conducting property (H + /O 2– /e – ), fast open-circuit voltage response (~16–~470 mV) for gradients change, and improved single-cell performance (~31% lower polarization resistance at 600°C) were comprehensively demonstrated. Besides, the performance was analyzed under anodic conditions, which showed that the microstructure and phase change significantly affected the anodic behavior.

08 HYDROGEN↗
DOE OSTI2021

Numerical Analysis of Fuel Effects on Advanced Compression Ignition Using a Cooperative Fuel Research Engine Computational Fluid Dynamics Model

Growing environmental concerns and demand for a better fuel economy are driving forces that motivate the research for more advanced engines. Multi-mode combustion strategies have gained attention for their potential to provide high thermal efficiency and low emissions for light-duty applications. These strategies target optimizing the engine performance by correlating different combustion modes to load operating conditions. The extension from boosted spark ignition (SI) mode at high loads to advanced compression ignition (ACI) mode at low loads can be achieved by increasing the compression ratio and utilizing intake air heating. Further, in order to enable an accurate control of intake charge condition for ACI mode and rapid mode-switches, it is essential to gain fundamental insights into the autoignition process. Within the scope of ACI, homogeneous charge compression ignition (HCCI) mode is of significant interest. It is known for its potential benefits, operation at low fuel consumption, low NOx, and particulate matter (PM) emissions. In the present work, a virtual Cooperative Fuel Research (CFR) engine model is used to analyze fuel effects on ACI combustion. In particular, the effect of fuel octane sensitivity (S) (at constant Research Octane Number (RON)) on autoignition propensity is assessed under beyond-RON (BRON) and beyond-MON (BMON) ACI conditions. The three-dimensional CFR engine computational fluid dynamics (CFD) model employs a finite-rate chemistry approach with a multi-zone binning strategy to capture autoignition. Two binary blends with Research Octane Number (RON) of 90 are chosen for this study: primary reference fuel (PRF) with S = 0 and toluene–heptane (TH) blend with S = 10.8, representing paraffinic and aromatic gasoline surrogates. Reduced mechanisms for these blends are generated from a detailed gasoline surrogate kinetic mechanism. Simulation results with the reduced mechanisms are validated against experimental data from an in-house CFR engine, with respect to in-cylinder pressure, heat release rate, and combustion phasing. Thereafter, the sensitivity of combustion behavior to ACI operating condition (BRON versus BMON), air-fuel ratio (λ = 2 and 3), and engine speed (600 and 900 rpm) is analyzed for both fuels. It is shown that the sensitivity of a fuel’s autoignition characteristics to λ and engine speed significantly differs at BRON and BMON conditions. Moreover, this sensitivity is found to vary among fuels, despite the same RON. It is also observed that the presence of low-temperature heat release (LTHR) under BRON condition leads to more sequential autoignition and longer combustion duration than BMON condition. Finally, the study indicates that the octane index (OI) fails to capture the trend in the variation of autoignition propensity with S under the BMON condition.

33 ADVANCED PROPULSION SYSTEMS↗