Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “perturbation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Solving gyrokinetic systems with higher-order time dependence

We discuss theoretical and numerical aspects of gyrokinetics as a Lagrangian field theory when the field perturbation is introduced into the symplectic part. A consequence is that the field equations and particle equations of motion in general depend on the time derivatives of the field. The most well-known example is when the parallel vector potential is introduced as a perturbation, where a time derivative of the field arises only in the equations of motion, so an explicit equation for the fields may still be written. We will consider the conceptually more problematic case where the time-dependent fields appear in both the field equations and equations of motion, but where the additional term in the field equations is formally small. The conceptual issues were described by Burby (J. Plasma Phys., vol. 82 (3), 2016, 905820304): these terms lead to apparent additional degrees of freedom to the problem, so that the electric field now requires an initial condition, which is not required in low-frequency (Darwin) Vlasov–Maxwell equations. Also, the small terms in the Euler–Lagrange equations are a singular perturbation, and these two issues are interlinked. For well-behaved problems the apparent additional degrees of freedom are spurious, and the physically relevant solution may be directly identified. Because we needed to assume that the system is well behaved for small perturbations when deriving gyrokinetic theory, we must continue to assume that when solving it, and the physical solutions are thus the regular ones. The spurious nature of the singular degrees of freedom may also be seen by changing coordinate systems so the varying field appears only in the Hamiltonian. We then describe how methods appropriate for singular perturbation theory may be used to solve these asymptotic equations numerically. We then describe a proof-of-principle implementation of these methods for an electrostatic strong-flow gyrokinetic system; two basic test cases are presented to illustrate code functionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Consistent inclusion of triple substitutions within a coupled cluster based static quantum embedding theory

We have previously proposed the MPCC static embedding framework for quantum chemistry that self-consistently couples a high-level coupled cluster (CC) treatment of the fragment (active region) with a lower level, Møller–Plesset perturbation treatment of the environment. Our initial implementation was limited to single and double (SD) substitutions, with CCSD for the fragment and first-order perturbative SD amplitudes for the environment. Here, we extend the MPCC embedding treatment to triple substitutions, which is essential for achieving chemical accuracy in energy differences. To this end, we employ a CCSDT solver for the fragment subsystem. For the environment subsystem, we construct a perturbative estimate of the triples amplitudes, explicitly accounting for feedback from all fragment amplitudes. The resulting approach is denoted MPCCSDT(pt). We further introduce a more complete formulation in which feedback from the environment amplitudes to the fragment amplitudes is also included. This scheme involves an iterative treatment of the environment triples amplitudes and is denoted MPCCSDT(it). In addition, we assess the accuracy of the previously proposed low-level method by introducing a modified low-level approach that incorporates a lowest-order treatment of selected long-range effects, including spin fluctuations and charge polarization. All resulting approaches may be viewed as post-CCSD(T) methods. We therefore consider test cases for which CCSD(T) exhibits substantial deviations from CCSDT. These include (i) single- and triple-bond stretching in F 2 and N 2 , (ii) bond dissociation energies of selected molecules from the W4-11 dataset, and (iii) total atomization energies of transition metal hydrides. Our results demonstrate that inclusion of triples amplitudes at the fragment level alone is insufficient; a perturbative treatment of the environment triples amplitudes is required. For many energy-difference applications, feedback from the environment triples amplitudes to the fragment amplitudes is not essential, but it does play a role in the very challenging CoH and FeH molecules. A very interesting finding from our study is that in some challenging cases, we need an improved (second-order) perturbative method for the SD amplitudes, going beyond the first-order one used in our earlier work. In conclusion, considering both cost and accuracy, the MP2CCSDT(pt) model is the most promising for future applications among the candidates considered here.

Shee, Avijit [University of California, Berkeley, ↗

Computational analysis of ordering in non-liquid crystalline versus liquid crystalline materials with special reference to nBAC

A computational analysis of ordering in non-liquid crystalline p-n-alkyl benzoic acid, having 1 (1BAC), 2 (2BAC) and 3(3BAC) carbon atoms in the alkyl chain has been carried out with respect to translatory and orientational motions, but detailed results are reported only for 3BAC. The evaluation of net atomic charges and dipole moments at each atomic center has been carried out using complete neglect differential overlap (CNDO/2) method. The modified Rayleigh-Schrodinger perturbation theory along with the multicentered-multipole expansion method has been employed to evaluate long-range interactions, while a '6-exp' potential function has been assumed for short-range interactions. On the basis of stacking, in-plane and terminal interaction energy calculations, all possible arrangements of a molecular pair have been considered. A comparative picture of molecular parameters, such as total energy, binding energy, and total dipole moment of 3BAC with higher homologous series liquid crystalline compounds having 4(4BAC), 5(5BAC), and 6(6BAC) alkyl chain carbon atoms, has been given. It is found that, if a suitable functional group is attached to 3BAC, so that the length to breadth ratio is increased, the molecule will show a change in the long-range order, the phase transition temperature and other liquid crystalline properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lagrangian description of warm plasmas

Efforts are described to extend the averaged Lagrangian method of describing small signal wave propagation and nonlinear wave interaction, developed by earlier workers for cold plasmas, to the more general conditions of warm collisionless plasmas, and to demonstrate particularly the effectiveness of the method in analyzing wave-wave interactions. The theory is developed for both the microscopic description and the hydrodynamic approximation to plasma behavior. First, a microscopic Lagrangian is formulated rigorously, and expanded in terms of perturbations about equilibrium. Two methods are then described for deriving a hydrodynamic Lagrangian. In the first of these, the Lagrangian is obtained by velocity integration of the exact microscopic Lagrangian. In the second, the expanded hydrodynamic Lagrangian is obtained directly from the expanded microscopic Lagrangian. As applications of the microscopic Lagrangian, the small-signal dispersion relations and the coupled mode equations are derived for all possible waves in a warm infinite, weakly inhomogeneous magnetoplasma, and their interactions are examined.

Kim, H.↗

Ground-state energies of simple metals

A structural expansion for the static ground-state energy of a simple metal is derived. Two methods are presented, one an approach based on single-particle band structure which treats the electron gas as a nonlinear dielectric, the other a more general many-particle analysis using finite-temperature perturbation theory. The two methods are compared, and it is shown in detail how band-structure effects, Fermi-surface distortions, and chemical-potential shifts affect the total energy. These are of special interest in corrections to the total energy beyond third order in the electron-ion interaction and hence to systems where differences in energies for various crystal structures are exceptionally small. Preliminary calculations using these methods for the zero-temperature thermodynamic functions of atomic hydrogen are reported.

Hammerberg, J.↗

Probabilistic finite elements

In the Probabilistic Finite Element Method (PFEM), finite element methods have been efficiently combined with second-order perturbation techniques to provide an effective method for informing the designer of the range of response which is likely in a given problem. The designer must provide as input the statistical character of the input variables, such as yield strength, load magnitude, and Young's modulus, by specifying their mean values and their variances. The output then consists of the mean response and the variance in the response. Thus the designer is given a much broader picture of the predicted performance than with simply a single response curve. These methods are applicable to a wide class of problems, provided that the scale of randomness is not too large and the probabilistic density functions possess decaying tails. By incorporating the computational techniques we have developed in the past 3 years for efficiency, the probabilistic finite element methods are capable of handling large systems with many sources of uncertainties. Sample results for an elastic-plastic ten-bar structure and an elastic-plastic plane continuum with a circular hole subject to cyclic loadings with the yield stress on the random field are given.

Belytschko, Ted↗

Data pre-processing: Stratospheric aerosol perturbing effect on the remote sensing of vegetation: Correction method for the composite NDVI after the Pinatubo eruption

An operational stratospheric correction scheme used after the Mount Pinatubo (Phillipines) eruption (Jun. 1991) is presented. The stratospheric aerosol distribution is assumed to be only variable with latitude. Each 9 days the latitudinal distribution of the optical thickness is computed by inverting radiances observed in the NOAA AVHRR channel 1 (0.63 micrometers) and channel 2 (0.83 micrometers) over the Pacific Ocean. This radiance data set is used to check the validity of model used for inversion by checking consistency of the optical thickness deduced from each channel as well as optical thickness deduced from different scattering angles. Using the optical thickness profile previously computed and radiative transfer code assuming Lambertian boundary condition, each pixel of channel 1 and 2 are corrected prior to computation of NDVI (Normalized Difference Vegetation Index). Comparison between corrected, non corrected, and years prior to Pinatubo eruption (1989 to 1990) NDVI composite, shows the necessity and the accuracy of the operational correction scheme.

Vermote, E.↗

Quantum Chemistry via Walks in Determinant Space

There are many chemical questions of practical interest to the DOE that could be answered if there were an electronic structure method that provided consistently accurate results for all systems at an affordable computational cost. The coupled cluster method with single, double and perturbative triple excitations (CCSD(T)) is the most frequently used high-order method, but it has known deficiencies, e.g., in the description of stretched bonds. The full configuration interaction (FCI) method is the most robust method for treating electronic correlations, but it is little used because its computational cost scales exponentially in the size of the system. The largest calculation that has been done to date employed 10 billion determinants. In this regard, there was a major advance in 2010. The Alavi group at Cambridge University developed a stochastic approach to FCI --- combining it with ideas from quantum Monte Carlo (QMC) --- called FCIQMC, that allows one to go to a far larger number of determinants in certain circumstances. The computational cost is exponential in the system and basis size but with a much reduced exponent compared to conventional FCI. In this project Umrigar's group made several major improvements to the FCIQMC method that increased its efficiency by many orders of magnitude. In addition this project resulted in a cross-fertilization of ideas between the FCIQMC method, the older phaseless auxilliary-field quantum Monte Carlo (AFQMC) method developed by Zhang and Krakauer (two of the PI's of this project), and symmetry-restored wavefunctions developed by Scuseria (also a PI of this project).

36 MATERIALS SCIENCE↗

Comparison of the Brueckner and coupled-cluster approaches to electron correlation

The coupled-cluster and Brueckner electron correlation methods are used to determine the equilibrium structures, dipole moments, harmonic vibrational frequencies, and IR intensities of NH3, FON, Be3, BeC2, and BeO2. The singles and doubles coupled-cluster and Brueckner doubles methods are employed, and the corresponding methods that include a perturbational estimate of connected triple excitations are also investigated. The T sub 1 diagnostic is found to provide a good indication of the magnitude of the difference between the results obtained with the coupled-cluster and Brueckner methods. For NH3, the T sub 1 diagnostic is small and so the differences between results obtained from coupled-cluster and Brueckner theories are quite small. It is found for all of the molecules under consideration that inclusion of the contribution from connected triple excitations is more important than the differences between the Brueckner and coupled-cluster correlation methods.

Lee, Timothy J.↗

BRST quantization of cosmological perturbations

BRST quantization is an elegant and powerful method to quantize theories with local symmetries. In this article we study the Hamiltonian BRST quantization of cosmological perturbations in a universe dominated by a scalar field, along with the closely related quantization method of Dirac. We describe how both formalisms apply to perturbations in a time-dependent background, and how expectation values of gauge-invariant operators can be calculated in the in-in formalism. Our analysis focuses mostly on the free theory. By appropriate canonical transformations we simplify and diagonalize the free Hamiltonian. BRST quantization in derivative gauges allows us to dramatically simplify the structure of the propagators, whereas Dirac quantization, which amounts to quantization in synchronous gauge, dispenses with the need to introduce ghosts and preserves the locality of the gauge-fixed action.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equation-of-Motion Coupled-Cluster Cumulant Green’s Function for Excited States and X-ray Spectra

Green’s function methods within many-body perturbation theory provide a general framework for treating electronic correlations in excited states and spectra. Conventional methods using the Dyson equation or the cumulant expansion are typically based on the GW self-energy approximation. In order to extend this approximation in molecular systems, a non-perturbative real-time coupled-cluster cumulant Green’s function approach has been introduced, where the cumulant is obtained as the solution to a set of coupled first order, non-linear differential equations. This approach naturally includes non-linear corrections to conventional cumulant Green’s function techniques where the cumulant is linear in the GW self-energy. The method yields the spectral function associated with the core Green’s function, which is directly related to the x-ray photoemission spectra (XPS) of molecular systems. The approach also yields very good results for binding energies and satellite excitations. The x-ray absorption spectrum (XAS) is then obtained as a convolution of the core spectral function and an effective one-body absorption spectrum. Here this approach is extended to include the full coupled-cluster-singles (CCS) core Green’s function by including the complete form of the non-linear contributions to the cumulant as well as all single, double, and triple cluster excitations in the CC amplitude equations. This approach naturally builds in orthogonality and shake-up effects analogous to those in the Mahan-Noizeres-de Dominicis edge singularity corrections that enhance the XAS near the edge. Themethod is illustrated for the XPS and XAS of NH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new method for point-spread function correction using the ellipticity of re-smeared artificial images in weak gravitational lensing shear analysis

Highly accurate weak lensing analysis is urgently required for planned cosmic shear observations. For this purpose we have eliminated various systematic noises in the measurement. The point-spread function (PSF) effect is one of them. A perturbative approach for correcting the PSF effect on the observed image ellipticities has been previously employed. Here we propose a new non-perturbative approach for PSF correction that avoids the systematic error associated with the perturbative approach. The new method uses an artificial image for measuring shear which has the same ellipticity as the lensed image. This is done by re-smearing the observed galaxy images and observed star images (PSF) with an additional smearing function to obtain the original lensed galaxy images. We tested the new method with simple simulated objects that have Gaussian or Sérsic profiles smeared by a Gaussian PSF with sufficiently large size to neglect pixelization. Under the condition of no pixel noise, it is confirmed that the new method has no systematic error even if the PSF is large and has a high ellipticity.

79 ASTRONOMY AND ASTROPHYSICS↗

On the application of the Lindstedt–Poincaré method to the Lotka–Volterra system

Highlights: •The Lotka–Volterra system leads to periodic solutions. •The Lindstedt–Poincaré method removes secular terms in the perturbation series. •The perturbation series exhibits finite convergence radius. •The convergence radius can be obtained by Padé and Hermite–Padé approximants. •Large-order perturbation calculations are necessary for such application. -- Abstract: We apply the Lindstedt–Poincaré method to the Lotka–Volterra model and discuss alternative implementations of the approach. By means of an efficient systematic algorithm we obtain an unprecedented number of perturbation corrections for the two dynamical variables and the frequency. They enable us to estimate the radius of convergence of the perturbation series for the frequency as a function of the only model parameter. The method is suitable for the treatment of systems with any number of dynamical variables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The combined approach to obtain approximate analytical solution of instability phenomenon arising in secondary oil recovery process

Instability phenomenon mainly occurs in secondary oil recovery process due to viscosity difference of water and oil. Mathematical modeling of this phenomenon yields the non-linear partial differential equation. The homotopy perturbation new integral transform method has been proposed to solve this non-linear partial differential equation subject to appropriate initial and boundary conditions. It is concluded that the saturation of injected water S{sub w}(X,T) is increasing during instability phenomenon, when length of fingers(perturbance) and time increases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dosimetric Impact of Surgical Clips in Electron Beam Treatment of Breast Cancer

Titanium clips are commonly used to delineate the location of the tumor bed during breast cancer surgery. Electron beams are frequently used to boost radiation dose to the breast cavity. This research investigated the effect on such boost treatments as a result of metallic clip perturbation potentially exhibited through attenuation and scatter processes using measurements with Gafchromic film and treatment planning simulation with both generalized Gaussian pencil beam and electron Monte Carlo algorithms. Results showed that the potential effect of clip interference is unidentifiable from both algorithms. Dosimetry with Gafchromic external beam therapy film did detect dose perturbations caused by the titanium clips in proximal plane, 0.23 mm away, resulting in 3.0% backscatter and 2.4% attenuation at 6 MeV and 2.0% backscatter and 6.7% attenuation at 9 MeV. The noise contribution of the film scanner is estimated to be about 0.4% and nearly 2% uncertainty in film calibration. As a result, we conclude that the magnitude of dose perturbations from clip is negligible for clinical findings.

61 RADIATION PROTECTION AND DOSIMETRY↗

Quantum chemical ab initio prediction of proton exchange barriers between CH{sub 4} and different H-zeolites

A hybrid MP2:DFT (second-order Møller–Plesset perturbation theory–density functional theory) method that combines MP2 calculations for cluster models with DFT calculations for the full periodic structure is used to localize minima and transition structures for proton jumps at different Brønsted sites in different frameworks (chabazite, faujasite, ferrierite, and ZSM-5) and at different crystallographic positions of a given framework. The MP2 limit for the periodic structures is obtained by extrapolating the results of a series of cluster models of increasing size. A coupled-cluster (CCSD(T)) correction to MP2 energies is calculated for cluster models consisting of three tetrahedra. For the adsorption energies, this difference is small, between 0.1 and 0.9 kJ/mol, but for the intrinsic proton exchange barriers, this difference makes a significant (10.85 ± 0.25 kJ/mol) and almost constant contribution across different systems. The total values of the adsorption energies vary between 22 and 34 kJ/mol, whereas the total proton exchange energy barriers fall in the narrow range of 152–156 kJ/mol. After adding nuclear motion contributions (harmonic approximation, 298 K), intrinsic enthalpy barriers between 134 and 141 kJ/mol and apparent energy barriers between 105 and 118 kJ/mol are predicted for the different sites examined for the different frameworks. These predictions are consistent with experimental results available for faujasite, ferrierite, and ZSM-5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Runnings in the curvaton

We investigate the scale-dependence, or the runnings, of linear and second order density perturbations generated in various curvaton scenarios. We argue that the second order perturbations, i.e. non-Gaussianity, can strongly depend on the scale, even when the linear perturbations are nearly scale-invariant. We present analytic formulae for the runnings from curvatons with general energy potentials, and clarify the conditions under which f{sub NL} becomes strongly scale-dependent. From the point of view of the f{sub NL} running, curvaton potentials can be classified into roughly two categories by whether the potential flattens or steepens compared to a quadratic one. As such examples, we study pseudo-Nambu-Goldstone curvatons, and self-interacting curvatons, respectively. The dynamics of non-quadratic curvatons and the behaviors of the resulting density perturbations are clarified by analytical methods. Then we also study models where multiple source can be responsible for density perturbations such as the multi-curvaton, and mixed curvaton and inflaton models where the running of f{sub NL} can also be large due to their multi-source nature. We make quantitative analysis for each curvaton scenario and discuss in what cases the scale-dependence, in particular, of f{sub NL} can be large enough to be probed with future CMB experiments.

79 ASTRONOMY AND ASTROPHYSICS↗