Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “particle data analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Image analysis measurements of particle coefficient of restitution for coal gasification applications

New robust Lagrangian computational fluid dynamic (CFD) models are powerful tools that can be used to study the behavior of a diverse population of coal particle sizes, densities, and mineral compositions in entrained gasifiers. By using this approach, the responses of the particles impacting the wall were characterized over a range of velocities (1 to 8 m/s) and incident angles (90 to 20°). Within CFD models, the kinematic coefficient of restitution is the boundary condition defining the particle wall behavior. Four surfaces were studied to simulate the physical conditions of different entrained-flow gasification particle–surface collision scenarios: 1) a flat metal plate 2) a low viscosity silicon adhesive, 3) a high viscosity silicon adhesive, and 4) adhered particles on a flat metal plate with Young's modulus of elasticity ranging from 0.9 to 190 GPa. Entrained flow and drop experiments were conducted with granular coke particles, polyethylene beads and polystyrene pellets. The particle normal and tangential coefficients of restitution were measured using high speed imaging and particle tracking. The measured coefficients of restitution were observed to have a strong dependence on the rebound angles for most of the data. Suitable algebraic expressions for the normal and the tangential component of the coefficient of restitution were developed based upon ANOVA analysis. These expressions quantify the effect of normalized Young's modulus, particle equancy, and relative velocity on the coefficient of restitution. The coefficient of restitution did not have a strong dependence on the particle velocity over the range considered as long as the velocity was above the critical velocity. However, strong correlations were found between the degree of equancy of the particles and the mean coefficient of restitution such that the coefficient of restitution decreased for smaller particle equancies. It was concluded that the degree of equancy and the normalized Young's modulus should be considered in applications such as gasification and other cases involving the impact of non-spherical particles and complex surfaces. Sliding was observed when particles impacted on oblique surfaces; however, the resulting effects were within the range of measurement uncertainties.

01 COAL, LIGNITE, AND PEAT↗

In-Situ phase and texture characterization of solution deposited PZT thin films during crystallization.

Ferroelectric lead zirconate titanate (PZT) thin films are used for integrated capacitors, ferroelectric memory, and piezoelectric actuators. Solution deposition is routinely used to fabricate these thin films. During the solution deposition process, the precursor solutions are spin coated onto the substrate and then pyrolyzed to form an amorphous film. The amorphous film is then heated at a higher temperature (650-700 C) to crystallize the film into the desired perovskite phase. Phase purity is critical in achieving high ferroelectric properties. Moreover, due to the anisotropy in the structure and properties of PZT, it is desirable to control the texture obtained in these thin films. The heating rate during crystallization process is known to affect the sequence of phase evolution and texture obtained in these thin films. However, to date, a comprehensive understanding of how phase and texture evolution takes place is still lacking. To understand the effects of heating rate on phase and texture evolution, in-situ diffraction experiments during the crystallization of solution deposited PZT thin films were carried out at beamline 6-ID-B, Advanced Photon Source (APS). The high X-ray flux coupled with the sophisticated detectors available at the APS synchrotron source allow for in-situ characterization of phase and texture evolution at the high ramp rates that are commonly used during processing of PZT thin films. A PZT solution of nominal composition 52/48 (Zr/Ti) was spin coated onto a platinum-coated Si substrate (Pt//TiO{sub x}//SiO{sub 2}//Si). The films were crystallized using an infrared lamp, similar to a rapid thermal annealing furnace. The ramp rate was adjusted by controlling the voltage applied to the infrared lamp and increasing the voltage by a constant step with every acquisition. Four different ramp rates, ranging from {approx}1000 C/s to {approx}1 C/s, were investigated. The sample was aligned in grazing incidence to maximize the signal from the thin films. Successive diffraction patterns were acquired with a 1s acquisition time using a MAR SX-165 CCD detector during crystallization. The sample to detector distance and the tilt rotations of the detector were determined in Fit2D{copyright} by using Al{sub 2}O{sub 3} as the calibrant. These corrections were applied to the patterns when binning the data into radial (2{theta}) and azimuthal bins. The texture observed in the thin film was qualitatively analyzed by fitting the intensity peaks along the azimuthal direction with a gaussian profile function to obtain the integrated intensity of the peaks. Data analysis and peak fitting was done using the curve fitting toolbox in MATLAB{copyright}. A fluorite-type phase was observed to form before the perovskite phase for all ramp rates. PtxPb is a transient intermetallic formed due to the interaction of the thin film and the bottom electrode during crystallization. Ramp rate was observed to significantly affect the amount of PtxPb observed in the thin films during crystallization. Ramp rate was also observed to affect the final texture obtained in the thin films. These results will be discussed in the poster in view of the current understanding of these materials.

43 PARTICLE ACCELERATORS↗

Momentum Spectrum of Cosmic Muons at a Depth of 320 Mwe

Since their discovery, great progress has been achieved in the field of cosmic ray physics particularly towards the understanding of the origin, transport and acceleration mechanisms of the high energy particles that constitute primary cosmic rays, their interaction processes in the galactic and extra galactic media, and also in the Earth's atmosphere. The interaction of primary cosmic ray particles in the Earth's atmosphere leads to the production of a cascade of secondary particles or Extensive Air Showers (EAS) with various components - electromagnetic, hadronic, muon and neutrino components. There is a large number of models to describe these interactions. Many cosmic ray experiments have used a variety of observables in EAS that provide an understanding of the hadronic interactions and also shed some light on the chemical composition of the primary particles. The muon flux at the surface provides a useful tool for the calculations of neutrino fluxes, the reconstruction of EAS and it can serve as a test of various interaction models. The CosmoALEPH detector, whichwas one of the experiments in CosmoLEP used the ALEPH detector at the European Laboratory for Particle Physics, CERN, to measure the muonic component of EAS. Preliminary results have recently shown that the momentum spectrum and charge ratio for cosmic muons measured by CosmoALEPH are well within the world average. This work reports on further improvements in the reconstruction of the cosmic muon events and data analysis. Cosmic muons are produced through interactions of primary cosmic radiation in the atmosphere. They are a component of extensive air showers which can also be measured underground. The CosmoALEPH experiment used the ALEPH detector at the European Laboratory for Particle Physics, CERN, to measure cosmic muon events at a depth of 320 mwe underground. The momentum spectrum and charge ratio of the cosmic muons are measured. The results are compared with the expectations from MC simulations based on different hadronic interaction models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the underlying event activity using charged-particle jets in proton-proton collisions at $\sqrt{s}$ = 2.76 TeV

A measurement of the underlying event (UE) activity in proton-proton collisions is performed using events with charged-particle jets produced in the central pseudorapidity region (|η jet | < 2) and with transverse momentum 1 ≤ p T jet < 100 GeV. The analysis uses a data sample collected at a centre-of-mass energy of 2.76 TeV with the CMS experiment at the LHC. The UE activity is measured as a function of p T jet in terms of the average multiplicity and scalar sum of transverse momenta (p T ) of charged particles, with |η| < 2 and p T > 0.5 GeV, in the azimuthal region transverse to the highest p T jet direction. By further dividing the transverse region into two regions of smaller and larger activity, various components of the UE activity are separated. As a result, the measurements are compared to previous results at 0.9 and 7 TeV, and to predictions of several Monte Carlo event generators, providing constraints on the modelling of the UE dynamics

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Low-speed Aerodynamic Investigations of a Hybrid Wing Body Configuration

Two low-speed static wind tunnel tests and a water tunnel static and dynamic forced-motion test have been conducted on a hybrid wing-body (HWB) twinjet configuration. These tests, in addition to computational fluid dynamics (CFD) analysis, have provided a comprehensive dataset of the low-speed aerodynamic characteristics of this nonproprietary configuration. In addition to force and moment measurements, the tests included surface pressures, flow visualization, and off-body particle image velocimetry measurements. This paper will summarize the results of these tests and highlight the data that is available for code comparison or additional analysis.

Vicroy, Dan D.↗

Search for Reactor-Produced Millicharged Particles with Skipper-CCDs at the CONNIE and Atucha-II Experiments

Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CONNIE and Atucha-II reactor neutrino experiments utilize Skipper-CCD sensors, which enable the detection of interactions in the eV range. We present world-leading limits on the charge of millicharged particles within a mass range spanning 6 orders of magnitude, derived through a comprehensive analysis and the combination of data from both experiments. Published by the American Physical Society 2025

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Resolving Detonation NanoDiamond Size Evolution and Morphology at Sub-Microsecond Time-Scales During High-Explosive Detonations

Characterization of the initial morphology of detonation nanodiamond (DND) has been the focus of many research studies that aim to develop fundamental understanding of carbon condensation under extreme conditions. Identifying the pathways of DND formation has the potential for significant impact in many of the controlled synthesis of nanoscale carbon with tailored functionality; currently, a wide range of possible (and conflicting) mechanisms of nucleation and growth have been proposed and further research is essential. Building a comprehensive understanding of DND formation is challenging because it requires in situ characterization on the sub-µs time-scale during a high explosive detonation. In this study, time resolved small angle X-ray scattering (TR-SAXS) is used to reveal the early-stage DND morphology from < 0.1 μs to 6 μs after the detonation front passes through the X-ray beam path. We address the ambiguity of models previously reported for analysis of small angle scattering from DND by comparing (i) in situ, TR-SAXS recorded during early-stage particulate formation and (ii) ex situ SAXS and transmission electron microscopy measurements (TEM) of products recovered from detonation of the same high-explosive within a carefully designed ice chamber. The SAXS from both late-time ( > 1 μs) in situ and recovered DND exhibit consistent features in the I(q) curve. Such close similarity allows a high fidelity SAXS model derived from the ex situ SAXS and TEM measurements to be applied to the in situ data, which yields new insight into the early stage (< 1µs) morphology of DND. Our analysis indicates a size-distribution of DND particles is observed within 0.1 μs post-detonation and have a mean core diameter slightly below 4 nm and surface texture that consists of hemispherical protrusions that extend ~ 1 nm from the surface. Beyond ~ 0.3 μs, the size distribution increases slightly, while the surface texture persists for several microseconds after the detonation. Combined with thermochemical simulations, these results indicate that during detonation of Composition B, carbon is condensed into nanoscale diamond much faster than previously reported in other studies. Furthermore, the surface texture of the DND is shown to arise during condensation rather than via subsequent graphitization.

carbon condensation↗

Mutagenic effects of a single and an exact number of alpha particles in mammalian cells

One of the main uncertainties in risk estimation for environmental radon exposure using lung cancer data from underground miners is the extrapolation from high- to low-dose exposure where multiple traversal is extremely rare. The biological effects of a single alpha particle are currently unknown. Using the recently available microbeam source at the Radiological Research Accelerator Facility at Columbia University, we examined the frequencies and molecular spectrum of S1- mutants induced in human-hamster hybrid (A(L)) cells by either a single or an exact number of alpha particles. Exponentially growing cells were stained briefly with a nontoxic concentration of Hoechst dye for image analysis, and the location of individual cells was computer-monitored. The nucleus of each cell was irradiated with either 1,2,4, or 8 alpha particles at a linear energy transfer of 90 keV/microm consistent with the energy spectrum of domestic radon exposure. Although single-particle traversal was only slightly cytotoxic to A(L) cells (survival fraction approximately 0.82), it was highly mutagenic, and the induced mutant fraction averaged 110 mutants per 10(5) survivors. In addition, both toxicity and mutant induction were dose-dependent. Multiplex PCR analysis of mutant DNA showed that the proportion of mutants with multilocus deletions increased with the number of particle traversals. These data provide direct evidence that a single a particle traversing a nucleus will have a high probability of resulting in a mutation and highlight the need for radiation protection at low doses.

NASA Discipline Radiation Health↗

Dirac-fermionic dark matter in U(1) X models

Here, we study a number of U(1) X models featuring a Dirac fermion dark matter particle. We perform a comprehensive analysis which includes the study of corrections to the muon magnetic moment, dilepton searches with LHC data, as well as direct and indirect dark matter detection constraints. We consider four different coupling structures, namely U(1) B–L , U(1) d–u , U(1)universal, and U(1) 10+5¯ , all motivated by compelling extensions to the standard model. We outline the viable and excluded regions of parameter space using a large set of probes. Our key findings are that the combination of direct detection and collider constraints rule out dark matter particle masses lighter than ~ 1 TeV, unless rather suppressed Z'-fermion couplings exist, and that for several of the models under consideration, collider constraints rule out Z' masses up to ~3 TeV. Lastly, we show that we can accommodate the recent Diboson excess reported by ATLAS collaboration within the U(1) d–u model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Publishing unbinned differential cross section results

Machine learning tools have empowered a qualitatively new way to perform differential cross section measurements whereby the data are unbinned, possibly in many dimensions. Unbinned measurements can enable, improve, or at least simplify comparisons between experiments and with theoretical predictions. Furthermore, many-dimensional measurements can be used to define observables after the measurement instead of before. There is currently no community standard for publishing unbinned data. While there are also essentially no measurements of this type public, unbinned measurements are expected in the near future given recent methodological advances. The purpose of this paper is to propose a scheme for presenting and using unbinned results, which can hopefully form the basis for a community standard to allow for integration into analysis workflows. This is foreseen to be the start of an evolving community dialogue, in order to accommodate future developments in this field that is rapidly evolving.

47 OTHER INSTRUMENTATION↗

Research on the ATLAS Experiment at the University of Illinois: Final Report

The goal of particle physics is to understand the Universe at its most fundamental level, including the constituents of matter and their interactions, and the nature of space and time itself. The quest to understand the fundamental building blocks of nature, and their interactions, is one of the most ambitious and enduring of human endeavors. Recent developments in particle physics and cosmology raise the exciting prospect that we are on the threshold of a major step forward in this pursuit. Facilities such as CERN's Large Hadron Collider (LHC) provide a unique window into the subatomic world to pursue this understanding. Mark Neubauer and his research group at the University of Illinois were supported over a nine-month period (07/01/2017 through 03/31/2018) to perform high-energy particle physics research on the ATLAS experiment at the LHC. The primary focus of this research was to search for physics beyond the standard model through an analysis of high-energy proton-proton collision data from the ATLAS experiment, with an emphasis on the Higgs boson as a sensitive tool for this search, and development of fast particle tracking systems for use the ATLAS trigger system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In situ observations of reacting Al/Fe 2 O 3 thermite: Relating dynamic particle size to macroscopic burn time

Time-resolved x-ray imaging is used to capture high-resolution images of the Al/Fe 2 O 3 thermite reaction as it proceeds in an extended burn tube. The observed thermite reaction products are generally large, multi-phase composite particles. Image processing algorithms are developed to extract a continuous record of composite particle size as a function of time and distance from the ignition point. Small particles are observed immediately after ignition, followed by a rapid increase in particle size and a gradual decline toward late times. Correlating the dynamic particle size with visible light emission from the reaction, we propose a two-stage mechanism where the combination of early ignition and delayed expansion causes the material closest to the ignition point to undergo substantial coalescence before it begins moving down the tube. We also identify two mechanisms that may contribute to particle size refinement at late times, both based on the collapse of large gas bubbles that are observed preferentially in particles at earlier times. A new approach to extracting burn times from luminous intensity data is explored, and we find that a more nuanced analysis of burn time and luminous intensity may help to improve reactivity assessments when data from in situ studies is unavailable.

36 MATERIALS SCIENCE↗

Bose-Einstein correlations of charged hadrons in proton-proton collisions at $\sqrt{s} =$ 13 TeV

Bose-Einstein correlations of charged hadrons are measured over a broad multiplicity range, from a few particles up to about 250 reconstructed charged hadrons in proton-proton collisions at $ \sqrt{s} $ = 13 TeV. The results are based on data collected using the CMS detector at the LHC during runs with a special low-pileup configuration. Three analysis techniques with different degrees of dependence on simulations are used to remove the non-Bose-Einstein background from the correlation functions. All three methods give consistent results. The measured lengths of homogeneity are studied as functions of particle multiplicity as well as average pair transverse momentum and mass. The results are compared with data from both CMS and ATLAS at $ \sqrt{s} $ = 7 TeV, as well as with theoretical predictions.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stable indications of relic gravitational waves in Wilkinson Microwave Anisotropy Probe data and forecasts for the Planck mission

The relic gravitational waves are the cleanest probe of the violent times in the very early history of the Universe. They are expected to leave signatures in the observed cosmic microwave background anisotropies. We significantly improved our previous analysis [W. Zhao, D. Baskaran, and L. P. Grishchuk, Phys. Rev. D 79, 023002 (2009)] of the 5-year WMAP TT and TE data at lower multipoles l. This more general analysis returned essentially the same maximum likelihood result (unfortunately, surrounded by large remaining uncertainties): The relic gravitational waves are present and they are responsible for approximately 20% of the temperature quadrupole. We identify and discuss the reasons by which the contribution of gravitational waves can be overlooked in a data analysis. One of the reasons is a misleading reliance on data from very high multipoles l and another a too narrow understanding of the problem as the search for B modes of polarization, rather than the detection of relic gravitational waves with the help of all correlation functions. Our analysis of WMAP5 data has led to the identification of a whole family of models characterized by relatively high values of the likelihood function. Using the Fisher matrix formalism we formulated forecasts for Planck mission in the context of this family of models. We explore in detail various 'optimistic', 'pessimistic', and 'dream case' scenarios. We show that in some circumstances the B-mode detection may be very inconclusive, at the level of signal-to-noise ratio S/N=1.75, whereas a smarter data analysis can reveal the same gravitational wave signal at S/N=6.48. The final result is encouraging. Even under unfavorable conditions in terms of instrumental noises and foregrounds, the relic gravitational waves, if they are characterized by the maximum likelihood parameters that we found from WMAP5 data, will be detected by Planck at the level S/N=3.65.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis of in-situ microphysical measurements with remote retrievals and models

The comprehensive suite of in-situ cloud microphysical instruments that were operated onboard the Environment Canada Convair-480 during ISDAC 2008 provided a rich dataset for investigating the effect of cloud microphysics on cloud radiative properties and the effects of aerosol on clouds. The combination of CDP, 2D-S and 2D-P probes allowed for quantitative measurement of particle sizes spanning the range from 1 μm to > 1 mm and particle concentrations spanning the range from 10 -5 to 10 5 L -1 . The faster electronics of the 2D-S probe compared to older instruments allowed for more accurate sizing and concentration measurements. The reduced effect of ice shatter artifacts as a result of modifications to the 2D-S probe tips and the ability to identify ice particle shatter events using particle interarrival times was particularly valuable for accurate analysis of particles in the size range <400 μm. Furthermore, the use of a sophistical multi-dimensional algorithm for estimating particle mass on a particle by particle basis, using the particle perimeter, cross sectional area, length and perpendicular width, was applied for 2D-S data for the first time. Altogether, these state-of-the-art measurements and analysis techniques provided the most accurate and detailed glimpse to date of mixed-phase Arctic stratus.

54 ENVIRONMENTAL SCIENCES↗

Classification and imaging of spent nuclear fuel dry casks using cosmic ray muons - 132

The present work explores alternative approaches for in situ monitoring with near real-time data analysis and imaging of dry casks using muons. Monitoring can provide useful signals about the cask contents in a yes/no decision format faster and with fewer muons than traditional imaging. Imaging can be performed as a second step in this process if specific information about the location of the fuel assemblies is needed. To explore and analyze these two modalities, simulations of muon scattering and displacement were performed for various scenarios, including vertical and horizontal fully loaded dry casks, half-loaded dry casks, dry casks with one row of fuel assemblies missing, dry casks with one fuel assembly missing, and empty dry casks. This work demonstrates monitoring can provide fast and reliable indication about the contents of the cask. For 100,000 muons, a few minutes of measurement time with a 3.6 m{sup 2} detector at a 45 deg. zenith angle, 90% detection probability for missing fuel assemblies can be achieved with a false alarm rate lower than 1%. If a positive signal is detected, then longer measurements can be performed and coupled with muon imaging algorithms to determine the location of missing nuclear material. In these cases, transmission muon radiography can produce images of acceptable resolution for all scenarios. In the horizontal dry cask case, all scenarios can be identified and separated adequately. In the vertical dry cask case, similar conclusions can be drawn, but because of shadowing from other fuel assemblies, the location of a missing fuel assembly cannot be identified in the 2-D transmission map. However, views from different directions may resolve this. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Scaling properties in bulk and p T -dependent particle production near midrapidity in relativistic heavy ion collisions

The centrality dependence of the midrapidity charged-particle multiplicity density (|η| < 1) is presented for Au + Au and Cu + Cu collisions at RHIC over a broad range of collision energies. The multiplicity measured in the Cu + Cu system is found to be similar to that measured in the Au + Au system, for an equivalent N part , with the observed factorization in energy and centrality still persistent in the smaller Cu + Cu system. The extent of the similarities observed for bulk particle production is tested by a comparative analysis of the inclusive transverse momentum distributions for Au + Au and Cu + Cu collisions near midrapidity. It is found that, within the uncertainties of the data, the ratio of yields between the various energies for both Au + Au and Cu + Cu systems are similar and constant with centrality, both in the bulk yields and as a function of p T , up to at least 4 GeV/c. As a result, the effects of multiple nucleon collisions that strongly increase with centrality and energy appear to only play a minor role in bulk and intermediate transverse momentum particle production.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

B Physics at the DO experiment

At the beginning of RunII of the Tevatron and after more than 30 years of the discovery of the b quark at Fermilab, the lack of statistics had restricted our knowledge on b-baryons to the observation of the lightest b-baryon, the {lambda}{sub b}, and to its lifetime measured in decays which did not allow a fully reconstruction of this particle. I present results of the search for b-baryons in the DO experiment. As part of this program, a precise measurement of the {lambda}{sub b} lifetime was performed, and the discovery of the {xi}{sub b}{sup -} resulted from an analysis of 1.3 fb{sup -1} of data collected with the D0 detector during 2002-2006.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗