Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Modes of mantle convection and the removal of heat from the earth's interior

Thermal histories for two-layer and whole-mantle convection models are calculated and presented, based on a parameterization of convective heat transport. The model is composed of two concentric spherical shells surrounding a spherical core. The models were constrained to yield the observed present-day surface heat flow and mantle viscosity, in order to determine parameters. These parameters were varied to determine their effects on the results. Studies show that whole-mantle convection removes three times more primordial heat from the earth interior and six times more from the core than does two-layer convection (in 4.5 billion years). Mantle volumetric heat generation rates for both models are comparable to that of a potassium-depleted chondrite, and thus surface heat-flux balance does not require potassium in the core. Whole and two-layer mantle convection differences are primarily due to lower mantle thermal insulation and the lower heat removal efficiency of the upper mantle as compared with that of the whole mantle.

Spohn, T.↗

Simulation of the planetary boundary layer with the UCLA general circulation model

A planetary boundary layer (PBL) model is presented which employs a mixed layer entrainment formulation to describe the mass exchange between the mixed layer with the upper, laminar atmosphere. A modified coordinate system couples the mixed layer model with large scale and sub-grid scale processes of a general circulation model. The vertical coordinate is configured as a sigma coordinate with the lower boundary, the top of the PBL, and the prescribed pressure level near the tropopause expressed as coordinate surfaces. The entrainment mass flux is parameterized by assuming the dissipation rate of turbulent kinetic energy to be proportional to the positive part of the generation by convection or mechanical production. The results of a simulation of July are presented for the entire globe.

Suarez, M. J.↗

Asymmetric emission-line regions with out-flowing mass in QSOs and the z/ab/ at least equal to z/em/ systems

A heuristic asymmetrical model for a quasar emission-line region, with material streaming out, is described. The physical parameters are essentially the same as those of static models; the geometry turns out to be the dominant factor in determining the emission line profiles. Calculations are carried out for a variety of parameterized flow models and for the Blumenthal and Mathews (1975) theoretical model of a radiatively driven flow. The emission-line profiles are insensitive to the details of the acceleration, the filling factor, and the ionization profile. Absorption is assumed to take place in stationary matter in the QSO's galaxy or associated group or cluster, so that z(ab) is identified with the cosmological redshift. Due to the flow, the emission-lines are shifted with respect to the absorption-lines; in cases of a flow directed towards the observer systems with z(ab) at least equal to z(em) result. The distribution of absorption redshifts is symmetric about z(em).

Goldman, I.↗

A model of Martian slope winds - Implications for eolian transport

Observations of dark Martian wind streaks not associated with visible topographic points of origin (coalesced dark streaks) show these features to favor regions with slopes of 1-10 deg. To investigate the circulation over such slopes, a Boussinesq fluid is adopted and a constant eddy diffusivity parameterization is assumed for small-scale mixing. The equations of motion are scaled to determine the range of slopes over which a strong local circulation due to slope winds can exist. For nighttime conditions, the estimated range compares well with the observed range of slopes favored by coalesced dark streaks. For daytime conditions, the slope wind solution is not valid. A simple one-dimensional analytic model is solved to determine friction velocities and velocity and temperature profiles. For reasonable choices of the input parameters, friction velocities and wind velocities suggestive of active downslope eolian transport on slopes of 1-10 deg are found. Friction velocities are largest over surfaces with low thermal inertia and large roughness length.

Magalhaes, J.↗

The seasonal CO2 cycle on Mars - An application of an energy balance climate model

Energy balance climate models of the Budyko-Sellers variety are applied to the carbon-dioxide cycle on Mars. Recent data available from the Viking mission, in particular the seasonal pressure variations measured by Viking landers, are used to constrain the models. No set of parameters was found for which a one-dimensional model parameterized in terms of ground temperature gave an adequate fit to the observed pressure variations. A modified, two-dimensional model including the effects of dust storms and the polar hood reasonably reproduces the pressure curve, however. The implications of these results for Martian climate changes are discussed.

James, P. B.↗

Internal gravity waves in the solar atmosphere. II - Effects of radiative damping

In the solar photosphere, temperature fluctuations associated with acoustic-gravity waves may be rapidly smoothed by the transfer mechanism of radiation between hotter and cooler regions. The present investigation of the radiative effects on internal gravity waves takes into account the parameterization of the radiative energy, employing the Newtonian cooling approximation. A linear analysis of the propagation of internal gravity waves is carried out in a model of the solar atmosphere which is taken to be homogeneous in the horizontal coordinates. Linear wave properties both with and without radiative cooling are summarized, and the variation with height of energy fluxes and of nonlinearities in the waves is discussed. Attention is given to the significance of the obtained results in terms of energy balance in the chromosphere and in relation to spectral line observations.

Mihalas, B. W.↗

A high-resolution model of the planetary boundary layer - Sensitivity tests and comparisons with SESAME-79 data

A one-dimensional, planetary boundary layer (PBL) model is presented and verified using April 10, 1979 SESAME data. The model contains two modules to account for two different regimes of turbulent mixing. Separate parameterizations are made for stable and unstable conditions, with a predictive slab model for surface temperature. Atmospheric variables in the surface layer are calculated with a prognostic model, with moisture included in the coupled surface/PBL modeling. Sensitivity tests are performed for factors such as moisture availability, albedo, surface roughness, and thermal capacity, and a 24 hr simulation is summarized for day and night conditions. The comparison with the SESAME data comprises three hour intervals, using a time-dependent geostrophic wind. Close correlations were found with daytime conditions, but not in nighttime thermal structure, while the turbulence was faithfully predicted. Both geostrophic flow and surface characteristics were shown to have significant effects on the model predictions

Zhang, D.↗

On two-layer models and the similarity functions for the PBL

An operational Planetary Boundary Layer model which employs similarity principles and two-layer patching to provide state-of-the-art parameterization for the PBL flow is used to study the popularly used similarity functions, A and B. The expected trends with stratification are shown. The effects of baroclinicity, secondary flow, humidity, latitude, surface roughness variation and choice of characteristic height scale are discussed.

Brown, R. A.↗

Climate studies with a multi-layer energy balance model. I - Model description and sensitivity to the solar constant. II - The role of feedback mechanisms in the CO2 problem

A nine-layer zonally averaged, steady-state model, based upon thermal energy balance, is developed for use in climate sensitivity studies and includes an accurate treatment of radiative transfer, parameterized meridional and vertical energy transport, and thermodynamic interaction between the surface and the atmosphere. A high degree of nonlinearity is exhibited by the model in a study of sensitivity to changes in the solar constant. The change in the hemispheric mean surface temperature is +3.1 C in response to a 2% increase in the solar constant and -4.3 C in response to a 2% decrease in the solar constant. The sensitivity varies with latitude, and the response of atmospheric temperature varies with height. In addition, the model is used to study the sensitivity of climate to a doubling of the atmospheric CO2 content. It is found that the tropospheric temperature lapse rate decreases at low latitudes but increases at high latitudes in response to a doubled CO2 content. Averaged over the Northern Hemisphere, the change is +2.3 C in the surface temperature and +0.47 C in the earth's brightness temperature. The effects of some feedback mechanisms on the climate sensitivity to a doubled CO2 content show that the sensitivity of surface temperature approximately doubles at all latitudes due to the change in water vapor content.

Peng, L.↗

Initial results from a mesoscale atmospheric simulation system and comparisons with the AVE-SESAME I data set

The development of a comprehensive mesoscale atmospheric simulation system (MASS) is described in detail. The modeling system is designed for both research and real-time forecast applications. The 14-level numerical model, which has a 48 km grid mesh, can be run over most of North America and the adjacent oceanic regions. The model employs sixth-order accurate numerics, generalized similarity theory boundary-layer physics, a sophisticated cumulus parameterization scheme, and state of the art analysis and initialization techniques. Examples of model output on the synoptic and subsynoptic scales are presented for the AVE-SESAME I field experiment on 10-11 April 1979. The model output is subjectively compared to the observational analysis and the LFM II output on the synoptic scale. Subsynoptic model output is compared to analyses generated from the AVE-SESAME I data set.

Kaplan, M. L.↗

Development of improved hydrogen recombination in sealed nickel-cadmium aerospace cells

The identification and measurement of a hydrogen recombination mechanism in nickel-cadmium cells has made deep reconditioning on a battery basis safe and feasible. Deep reconditioning has been shown to improve performance and increase life of nickel-cadmium batteries in geosynchronous orbit applications. The hydrogen recombination mechanism and data supporting the mechanism are presented. Parameteric cell design experiments are described which have lead to the definition of nickel-cadmium cells capable of high rate overdischarge. Nickel-cadmium cells with optimum hydrogen recombination capability were successfully cycled for 7 seasons in simulation of the geosynchronous orbit regime at 75 percent depth-of-discharge with extensive midseason and end-of-season overdischarge at rates ranging from C/4 to C/20.

Ritterman, P. F.↗

Venus' nighttime horizontal plasma flow, 'magnetic congestion', and ionospheric hole production

A simple rectilinear, two-dimensional MHD model is used to investigate the effects of field-aligned plasma loss and cooling on a dense plasma convecting across a weak magnetic field, in order to illumine the Venus nighttime phenomena of horizontal plasma flow, magnetic congestion and ionospheric hole production. By parameterizing field-aligned variations and explicitly solving for cross magnetic field variations, it is shown that the abrupt horizontal enhancements of the vertical magnetic field, as well as sudden decreases of the plasma density to very low values (which are characteristic of ionospheric holes), can be produced in the presence of field-aligned losses.

Grebowsky, J. M.↗

The interactive role of subsynoptic scale jet sreak and planetary boundary layer adjustments in organizing an apparently isolated convective complex

A mesoscale atmospheric simulation system is described that is being developed in order to improve the simulation of subsynoptic and mesoscale adjustments associated with cyclogenesis, severe storm development, and significant atmospheric transport processes. Present emphasis in model development is in the parameterization of physical processes, time-dependent boundary conditions, sophisticated initialization and analysis procedures, nested grid solutions, and applications software development. Basic characteristics of the system as of March 1982 are listed. In a case study, the Grand Island tornado outbreak of 3 June 1980 is considered in substantial detail. Results of simulations with a mesoscale atmospheric simulation system indicate that over the high plains subtle interactions between existing jet streaks and deep well mixed boundary layers can lead to well organized patterns of mesoscale divergence and pressure falls. The amplitude and positioning of these mesoscale features is a function of the subtle nonlinear interaction between the pre-existing jet-streak and deep well mixed boundary layers. Model results for the case study indicate that the model has the potential for forecasting the precursor mesoscale convective environment.

Kaplan, M. L.↗

Estimation of the average exchanges in momentum and latent heat between the atmosphere and the oceans with Seasat observations

Ocean-surface momentum flux and latent heat flux are determined from Seasat-A data from 1978 and compared with ship observations. Momentum flux was measured using the Seasat-A scatterometer system (SASS) heat flux, with the scanning multichannel MW radiometer (SMMR). Ship measurements were quality selected and averaged to increase their reliability. The fluxes were computed using a bulk parameterization technique. It is found that although SASS effectively measures momentum flux, variations in atmospheric stability and sea-surface temperature cause deviations which are not accounted for by the present data-processing algorithm. The SMMR-latent-heat-flux algorithm, while needing refinement, is shown to given estimations to within 35 W/sq m in its present form, which removes systematic error and uses an empirically determined transfer coefficient.

Liu, W. T.↗

A nested-grid mesoscale numerical weather prediction model modified for Space Shuttle operational requirements

A nested-grid mesoscale atmospheric simulation system (MASS) is tested over Florida for the case of intense seabreeze-induced convection. The goal of this modeling system is to provide real-time aviation weather support which is designed to fit local terminal operations such as those supporting NASA's STS. Results from a 58 km and a 14.5 km nested-grid simulation show that this version of the MASS is capable of simulating many of the basic characteristics of convective complexes during periods of relatively weak synoptic scale flow regimes. However, it is noted that extensive development work is required with nested-grid cumulus and planetary boundary layer parameterization schemes before many of the meso-beta scale features such as thunderstorm downdraft-produced bubble high pressure centers can be accurately simulated. After these schemes are properly tuned, MASS can be utilized to initialize microscale modeling systems.

Kaplan, M. L.↗

Assessing the quality of curvilinear coordinate meshes by decomposing the Jacobian matrix

An algebraic decomposition of the Jacobian matrix which relates physical and computational variables is presented. This invertible decomposition parameterizes the mesh by the physically intuitive qualities of cell orientation, cell orthogonality, cell volume, and cell aspect ratio. The decomposition can be used to analyze numerically generated curvilinear coordinate meshes and to assess the contribution of the mesh to the truncation error for any specific differential operator and algorithm. This is worked out in detail for Laplace's equation in nonconservative and conservative forms. The analysis is applied to the solution of the full potential code TAIR, showing grid plots, carpet plots, and truncation error for a NACA 0012 airfoil.

Kerlick, G. D.↗

Absolute spectrophotometry of Neptune - 3390 to 7800 A

Comparisons are undertaken of the results of Neptune absolute spectrophotometry from 3390 to 7800 A (having 10-A resolution over 3390-6055 A and 20-A resolution over 6055-7800 A) with both filter photometry and synthetic spectra computed on the basis of a parameterization proposed by Podolak and Danielson (1977) for aerosol scattering and absorption. A CH4/O2 ratio of between 0.01 and 0.1 is derived for the convectively mixed portion of the Neptune atmosphere, which constrains the optical properties of hypothetical aerosol layers.

Bergstralh, J. T.↗

The effect of a non-Maxwellian electron distribution on oxygen and iron ionization balances in the solar corona

Analytic expressions are derived for ionization and recombination rates in a parameterized non-Maxwellian electron velocity distribution with an enhanced high-energy tail. These expressions are then used in investigating the effect of such an enhancement in the high-energy tail of the coronal electron velocity distribution on the oxygen and iron ionization balances, O(+6) - O(+7) and Fe(+11) - Fe(+12). Relative to a Maxwellian of the same mean electron energy, the degree of ionization allowed by such a distribution is found to be either unchanged or slightly decreased for iron but often substantially increased for oxygen. The greater sensitivity of oxygen ionization balance to the high-energy distribution tail derives from the higher oxygen ionization threshold energy. It is noted that the electron temperature inferred from a measurement of the oxygen ionization ratio, O(+6)/O(+7), could indeed overestimate the actual coronal electron temperature by nearly 10 to the 6th K if the coronal electron distribution is incorrectly assumed to be Maxwellian.

Owocki, S. P.↗