Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “panel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Modal seismic analysis of a nuclear power plant control panel and comparison with SAP 4

The application of NASTRAN to seismic analysis by considering the example of a nuclear power plant control panel was considered. A modal analysis of a three-dimensional model of the panel, consisting of beam and quadri-lateral membrane elements, is performed. Using the results of this analysis and a typical response spectrum of an earthquake, the seismic response of the structure is obtained. ALTERs required to the program in order to compute the maximum modal responses as well as the resultant response are given. The results are compared with those obtained by using the SAP IV computer program.

Pamidi, M. R.↗

Recommendations for the performance rating of flat plate terrestrial photovoltaic solar panels

A review of recommendations for standardizing the performance rating of flat plate terrestrial solar panels is given to develop an international standard code of practice for performance rating. Required data to characterize the performance of a solar panel are listed. Other items discussed are: (1) basic measurement procedures; (2) performance measurement in natural sunlight and simulated sunlight; (3) standard solar cells; (4) the normal incidence method; (5) global method and (6) definition of peak power.

Treble, F. C.↗

Noise transmission by viscoelastic sandwich panels

An analytical study on low frequency noise transmission into rectangular enclosures by viscoelastic sandwich panels is presented. Soft compressible cores with dilatational modes and hard incompressible cores with dilatational modes neglected are considered as limiting cases of core stiffness. It is reported that these panels can effect significant noise reduction.

Vaicaitis, R.↗

Ambient temperature fatigue tests of elements of an actively cooled honeycomb sandwich structural panel

Elements of an actively cooled structural panel for a hypersonic aircraft have been investigated for fatigue characteristics. The study involved a bonded honeycomb sandwich panel with d-shaped coolant tubes. The curved portion of these tubes was embedded in the honeycomb, and the flat portion was bonded or soldered to the inner surface of the outer skin. The elements examined were two plain skin specimens (aluminum alloy); two specimens with skins attached to manifolds and tubes (one specimen was bonded, the other soldered); and a specimen representative of a corner section of the complete cooled sandwich. Sinusoidal loads were applied to all specimens. The honeycomb sandwich specimen was loaded in both tension and compression; the other specimens were loaded in tension only. The cooling tubes were pressurized with oil throughout the fatigue tests. The most significant results of these tests follow: All specimens exceeded their design life of 20,000 cycles without damage. Crack growth rates obtained in the plain skin specimens were used to determine the crack growth characteristics of aluminum alloy. Cracks in skins either bonded or soldered to cooling tubes propagated past the tubes without penetration. The coolant tubes served as crack arresters and temporarily stopped crack growth when a crack reached a tube-skin interface. The honeycomb core demonstrated that it could contain leakage from a tube.

Sharpe, E. L.↗

The use of the high flux heater in the smoke chamber to measure ignitability and smoke evolution of composite panels

Ten samples of composite panels were evaluated in the smoke chamber using a high flux heater to produce heat flux levels up to 9.5 watts per square cm. This study demonstrated the potential of the apparatus as a means of evaluating ignitability as well as smoke evolution. Depending on the material and the heat flux level, ignitability results ranged from ignition within 2 seconds to no ignition during the test period. Smoke density generally increased with increasing heat flux. A composite panel consisting of bismaleimide-fiberglass/bismaleimide honeycomb with carbon microballoons exhibited the lowest smoke density at high heat flux levels and the greatest resistance to autoignition.

Hilado, C. J.↗

Aircraft interior sandwich panel development

Three resin systems (bismaleimide, polyimide and modified phenolic) and several decorative films for use in aircraft interior panelling were subjected to flammability, smoke and gas emission, and toxicity testing. Cost, weight and appearance were also taken into account in assessing the feasibility of the materials for applications in passenger seating areas as well as in unoccupied compartments (galleys, lavatories, closets). Heat release studies and burn-through tests provided an additional measure of the fire safety characteristics of the panelling. A modified phenolic resin system and Tedlar-polycarbonate decorative film were selected as the most promising candidates for replacing conventional epoxy resin-impregnated fiberglass materials.

Anderson, R. A.↗

Lattice panels with high structural efficiency

By orienting strips for maximum strength, composite lattice panel is nearly as strong as "conventional" composite panels. They can be custom-tailored for various applications and also be useful in moderately loaded structures.

Mikulas, M. M., Jr.↗

Effects of fabrication and joining processes on compressive strength of boron/aluminum and borsic/aluminum structural panels

Processes for forming and joining boron/aluminum and borsic/aluminum to themselves and to titanium alloys were studied. Composite skin and titanium skin panels were joined to composite stringers by high strength bolts, by spotwelding, by diffusion bonding, by adhesive bonding, or by brazing. The effects of the fabrication and joining processes on panel compressive strengths were discussed. Predicted buckling loads were compared with experimental data.

Royster, D. M.↗

Method for producing solar energy panels by automation

A solar cell panel was fabricated by photoetching a pattern of collector grid systems with appropriate interconnections and bus bar tabs into a glass or plastic sheet. These regions were then filled with a first, thin conductive metal film followed by a layer of a mixed metal oxide, such as InAsO or InSnO. The multiplicity of solar cells were bonded between the protective sheet at the sites of the collector grid systems and a back electrode substrate by conductive metal filled epoxy to complete the fabrication of an integrated solar panel.

Evans, J. C., Jr.↗

Hexagon solar power panel

A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

Rubin, I.↗

User's manual: Subsonic/supersonic advanced panel pilot code

Sufficient instructions for running the subsonic/supersonic advanced panel pilot code were developed. This software was developed as a vehicle for numerical experimentation and it should not be construed to represent a finished production program. The pilot code is based on a higher order panel method using linearly varying source and quadratically varying doublet distributions for computing both linearized supersonic and subsonic flow over arbitrary wings and bodies. This user's manual contains complete input and output descriptions. A brief description of the method is given as well as practical instructions for proper configurations modeling. Computed results are also included to demonstrate some of the capabilities of the pilot code. The computer program is written in FORTRAN IV for the SCOPE 3.4.4 operations system of the Ames CDC 7600 computer. The program uses overlay structure and thirteen disk files, and it requires approximately 132000 (Octal) central memory words.

Moran, J.↗

Installation package for concentrating solar collector panels

The concentrating solar collector panels comprise a complete package array consisting of collector panels using modified Fresnel prismatic lenses for a 10 to 1 concentrating ratio, supporting framework, fluid manifolding and tracking drive system, and unassembled components for field erection.

Source record↗

Nonlinear panel flutter - A finite-element approach

A finite-element approach has been developed for computing nonlinear flutter characteristics of rectangular isotropic panels with stream-alined side edges, based on aerodynamic forces from supersonic two-dimensional quasi-steady aerodynamic theory. Stress distributions and panel oscillation frequencies were determined from the analysis. The finite-element formulation, solution procedure, and convergence characteristics are presented. Comparisons are made with linear flutter and large-amplitude vibration results and demonstrate that good accuracy is obtained. Non-linear flutter results are presented for effects of aerodynamic damping, length-width ratio, initial in-plane forces and boundary-support conditions. Comparisons with experimental results are also presented.

Mei, C.↗

Testing panels in shear and biaxial compression

Hydraulic jacks simultaneously apply torsion, axial compression, and lateral compression to structural panels. Jacks are suitable for testing large panels used in aircraft, lightweight trucks, and buses.

Neary, J. K.↗

Low-cost production of solar-cell panels

Large-scale production model combines most modern manufacturing techniques to produce silicon-solar-cell panels of low costs by 1982. Model proposes facility capable of operating around the clock with annual production capacity of 20 W of solar cell panels.

Bickler, D. B.↗

Method for making an aluminum or copper substrate panel for selective absorption of solar energy

A panel is described for selectively absorbing solar energy comprising an aluminum substrate. A zinc layer was covered by a layer of nickel and an outer layer of solar energy absorbing nickel oxide or a copper substrate with a nickel layer. A layer of solar energy absorbing nickel oxide distal from the copper substrate was included. A method for making these panels is disclosed.

Roberts, M. L.↗

Development of lightweight, fire-retardant, low-smoke, high-strength, thermally stable aircraft floor paneling

Extensive fire resistance and mechanical property tests were conducted on sandwich configurations composed of resin-fiberglass laminates bonded with adhesive to Nomex honeycomb and foam core. The test results were used to select a combination of materials that would improve the fire safety of the airplane without sacrificing mechanical performance of the aircraft floor panels. A test panel is being service evaluated in a commercial aircraft.

Anderson, R. A.↗

Design and fabrication of a skin stringer discrete tube actively cooled structural panel

The design optimization and practical implementation of actively cooled structural panel concepts was investigated. The desired actively cooled structural panel consisted of the cooled skin and a substructure. The primary load carrying components were fabricated from 2024-T3 aliminum alloy. The 3003-H14 coolant passage tubing was chosen because of its excellent corrosion resistance, workability needed to obtain the desired cross sectional shape, and strength. The Epon 951 adhesive was selected for its excellent structural properties and is the thinnest of available films, 0.064 mm. The Eccobond 58C silver filled epoxy was chosen because of its high thermal conductivity, and the alumina filled Epon 828 was chosen for structural and expansion characteristics.

Anthony, F. M.↗