Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Multi-orbital-phase and Multiband Characterization of Exoplanetary Atmospheres with Reflected Light Spectra

Direct imaging of widely separated exoplanets from space will obtain their reflected light spectra and measure atmospheric properties. Previous calculations have shown that a change in the orbital phase would cause a spectral signal, but whether this signal may be used to characterize the atmosphere has not been shown. We simulate starshade-enabled observations of the planet 47 UMa b, using the present most realistic simulator Starshade Imaging Simulation Toolkit for Exoplanet Reconnaissance to estimate the uncertainties due to residual starlight, solar glint, and exozodiacal light. We then use the Bayesian retrieval algorithm ExoReL{sup R} to determine the constraints on the atmospheric properties from observations using a Roman- or Habitable Exoplanet Observatory (HabEx)-like telescope, comparing the strategies to observe at multiple orbital phases or in multiple wavelength bands. With a ∼20% bandwidth in 600–800 nm on a Roman-like telescope, the retrieval finds a degenerate scenario with a lower gas abundance and a deeper or absent cloud than the truth. Repeating the observation at a different orbital phase or at a second 20% wavelength band in 800–1000 nm, with the same integration time and thus degraded signal-to-noise ratio (S/N), would effectively eliminate this degenerate solution. Single observation with a HabEx-like telescope would yield high-precision constraints on the gas abundances and cloud properties, without the degenerate scenario. These results are also generally applicable to high-contrast spectroscopy with a coronagraph with a similar wavelength coverage and S/N, and can help design the wavelength bandwidth and the observation plan of exoplanet direct-imaging experiments in the future.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-Pressure Rail System Design with Variable Pressure Control Strategy

This paper presents the design and the control method of a Multiple Pressure Rail system (MPR) with a variable pressure control logic that allows minimization of throttling loss, therefore, increasing the overall fluid power actuation efficiency. An MPR system allows controlling hydraulic actuators with a pressure control logic, as opposed to traditional flow control logics which are well established in mobile applications. A proper setting of the number of pressure rails and the pressure level in each rail permits optimizing the system efficiency of an MPR solution. MPR systems have been recently proposed with different purposes, but seldom adopt variable pressure control strategies to manage the pressure variations in the rails. Moreover, the related past work attempts to maximize the energy recovery during overrunning load conditions. This paper, instead, addresses the case of an MPR system that handles a multitude of hydraulic functions without significant overrunning loads, as it occurs in many mobile applications such as in agriculture. The paper first presents the design alternatives considered for the MPR system, including the supply, the control valves, and the controller. Second, a dedicated test rig is developed to support experimental activities and validations of a lumped parameter model developed within this research to develop the MPR control strategy. The results describe the operating features of the proposed MPR solution. By considering the case of a traditional LS system, the paper results also show how system efficiency can be highly improved, with energy savings in the order of 49%

24 POWER TRANSMISSION AND DISTRIBUTION↗

Stability-preserving Lossy Compression for Large-scale Partial Differential Equations

Checkpoint/Restart (C/R) strategies are vital for fault tolerance in PDE-based scientific simulations, yet traditional checkpointing incurs significant I/O overhead. Lossy compression offers a scalable solution by reducing checkpoint data size, but conventional methods often lack control over physical invariants (e.g., energy), leading to instability such as oscillations or divergence in Partial Differential Equations (PDE) systems. This paper introduces a stability-preserving compression approach tailored for PDE simulations by explicitly controlling kinetic and potential energy perturbations to ensure stable restarts. Extensive experiments conducted across diverse PDE configurations demonstrate that our method maintains numerical stability with minimal error magnification—even across multiple checkpoint-restart cycles—outperforming state-of-the-art lossy compressors. Parallel evaluations on the Frontier supercomputer show up to 8.4× improvement in checkpoint write performance and 6.3× in read performance, while maintaining relative L2 errors ∼ 2e-6 throughout continued simulation. These results provide practical guidance for balancing compression accuracy, stability, and computational efficiency in large-scale PDE applications.

Gong, Qian [ORNL] (ORCID:0000000235704142)↗

Stochastic minibatch approach to the ptychographic iterative engine

The ptychographic iterative engine (PIE) is a widely used algorithm that enables phase retrieval at nanometer-scale resolution over a wide range of imaging experiment configurations. By analyzing diffraction intensities from multiple scanning locations where a probing wavefield interacts with a sample, the algorithm solves a difficult optimization problem with constraints derived from the experimental geometry as well as sample properties. The effectiveness at which this optimization problem is solved is highly dependent on the ordering in which we use the measured diffraction intensities in the algorithm, and random ordering is widely used due to the limited ability to escape from stagnation in poor-quality local solutions. In this study, we introduce an extension to the PIE algorithm that uses ideas popularized in recent machine learning training methods, in this case minibatch stochastic gradient descent. Our results demonstrate that these new techniques significantly improve the convergence properties of the PIE numerical optimization problem.

47 OTHER INSTRUMENTATION↗

Demonstration of Utility Managed Smart Charging for Multiple Benefit Streams (Final Report)

In the summer of 2020, the U.S. Department of Energy (DOE) awarded funding to Exelon’s Maryland utilities—Baltimore Gas and Electric (BGE), Delmarva Power & Light (DPL), and Potomac Electric Power Company (Pepco)—to implement the Smart Charge Management (SCM) pilot. This initiative aimed to design and implement managed electric vehicle (EV) charging strategies, evaluate the grid impacts of EV charging, and assess the utilities' ability to control EV load based on real-time grid conditions. The SCM pilot explored four aspects for continued improvement: (1) cybersecurity and managed charging functionality testing of two vendor platforms—WeaveGrid (telematics-based) and Shell Recharge Solutions (network-based)—which pursued charge scheduling and optimization through distinct approaches; (2) an analysis by Argonne National Laboratory (ANL) modeling team of three potential SCM enrollment scenarios within BGE and Pepco service territories over the next decade to assess future scalability; (3) employing customer engagement strategies, including surveys and a responsive pricing approach; and (4) the launch and implementation of pilots in Exelon’s Maryland territories in collaboration with WeaveGrid.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Differentiable Multiphysics Codes: A Breakthrough Technology for Simulation and Computing

This document summarizes the findings of a strategic planning exercise commissioned by the Weapons Simulation and Computing, Computational Physics (WSC/CP) program at the Lawrence Livermore National Laboratory (LLNL) in FY24. During the year, the committee met with multiple stakeholder communities to gather input, opinions, suggestions and concerns which have been incorporated throughout this document. The key findings from this exercise are summarized: • The development of multiphysics modelling and simulation (mod/sim) codes and software technologies, their deployment on exascale compute platforms, and their broad adoption across the NNSA is a major success of the Advanced Simulation and Computing (ASC) program and the Exascale Computing Project (ECP). Sustained investment in these core technologies is essential. • Today’s state of the art involves running ensembles of O(100K) simulations to perform uncertainty quantification (UQ) and design studies using multiple statistical methods such as Bayesian optimization to understand sensitivities of our models and explore parameterized design spaces. Even with exascale computing, we are practically limited to O(10) parameters in these studies since the number of simulations required to sample the space scales exponentially with the number of design parameters. • The data from these simulation ensembles is increasingly being used to train machine learned (ML) surrogates (or reduced order models, ROMs) which can then be used for optimization or real time design exploration. However, the trained surrogates are still limited in the number of parameters they can represent due to the sampling limitations previously noted. • Augmenting our suite of integrated multiphysics simulation codes, both current and emerging, with the ability to compute gradients (solution derivatives) of arbitrary simulation outputs with respect to (some or all) simulation inputs would be a breakthrough technology, opening the door to a new era of efficient and automated inverse design based on verified and validated mod/sim capabilities. • This capability, which we refer to as differentiable multiphysics codes (DMCs), would revolutionize both UQ and optimization studies by breaking the curse of dimensionality that presently limits our “gradient-free” ensemble based computing approach. A similar breakthrough occurred in the AI/ML community once the ability to compute gradients of arbitrary loss functions using back-propagation became commonplace. Gradient information from the multiphysics codes can also be used to dramatically improve the efficiency and scale of training of ML/ROM surrogates for rapid assessments. • Achieving this in our suite of codes will be a grand challenge, similar to the amount of effort that was required to transition from CPU to GPU computing. It will require buy-in from the entire WSC/CP program and beyond, including all integrated codes, physics and engineering models, third-party library dependencies and performance portability abstractions. It will also require investment in research and development of numerical methods for computing adjoints of coupled physics across multiple adaptively refined moving meshes and of stochastic (Monte Carlo) and mesh free (SPH) methods. • New software and numerical techniques, largely pioneered by the AI/ML community, make this feasible. Chief among these is automatic differentiation (AD), the ability to employ AD at point-wise locations in a physics calculation (instead of traditional black-box approaches) and the ability to perform “back-propagation in time” (or reverse mode AD) for non-linear partial differential equations (PDEs). Fundamentally, the conclusion of this strategic planning exercise is that the time is right to undertake a large scale effort in WSC, centered on the existing integrated codes, to continue the natural evolution of mod/sim in the age of AI/ML. Instead of attempting to replace mod/sim with purely data driven AI/ML models, we believe the key to success is to integrate AI/ML by building on top of the decades of hard-won knowledge and the verified/validated multiphysics modelling capability that is the hallmark of the ASC program.

97 MATHEMATICS AND COMPUTING↗

Sparsity Applications for Gradient‐Based Optimization of Wind Farms

Optimizing wind farms is essential for designing efficient energy systems, especially as farms grow larger and span multiple sites. However, this optimization becomes increasingly challenging due to the rising computational cost associated with more turbines. Gradient‐based optimization methods scale better than gradient‐free approaches for large problems, but the most computationally expensive component remains the calculation of gradients for the objective function and constraint Jacobians. To address this, we propose leveraging sparsity to accelerate gradient evaluations and reduce the size of the constraint Jacobian. Wind farms naturally exhibit sparsity—many turbines do not influence each other under certain wind directions. However, unlike traditional sparse problems with fixed patterns, wind farm sparsity is dynamic, requiring new strategies to handle changing interactions efficiently. This paper presents a study of sparsity in wind farm optimization and introduces several methods to exploit it. These strategies are tested on multiple farms using the analytic Cumulative Curl model, with gradients computed via automatic differentiation (AD). The same sparsity‐aware techniques are also applicable to finite difference (FD) methods, where they can yield even greater speedups due to the high cost of directional evaluations. Results show that sparse methods achieve up to a 10x speedup with less than ± 5% variance in optimized wake losses compared to traditional methods. These findings suggest that sparsity‐aware optimization not only maintains solution quality but also scales efficiently with farm size, enabling more comprehensive design exploration at reduced computational cost.

17 WIND ENERGY↗

Interdiffusion and Formation of Intermetallic Compounds in High-Temperature Power Electronics Substrate Joints Fabricated by Transient Liquid Phase Bonding

Power electronics packages typically comprise a dielectric substrate bonded to a metal layer and attached to heat sinks using a low-thermal-conductivity solder. These multiple layers increase the effective thermal resistance of the package and are responsible for package failures under cyclic thermal loads. Bonding the aluminum nitride dielectric layer (AlN) directly to a low coefficient of thermal expansion (CTE) aluminum silicon carbide (AlSiC) cold plate using copper-aluminum (Cu-Al) transient liquid phase (TLP) bonding has been shown to improve the mechanical reliability of the power electronic packages while making the package more compact by bringing the cooling solutions closer to the devices. This study aims to characterize the Cu-Al bonds formed during the TLP bonding of AlSiC with three different power electronics substrates: pure aluminum nitride (AlN), aluminum (DBA), and copper (DBC). The material compositions and microstructures of the bonds were analyzed using scanning electron microscopy (SEM), x-ray spectroscopy (EDS), confocal scanning acoustic microscopy (C-SAM), and x-ray diffraction (XRD). ..alpha..-Al solid compound was identified as the dominant phase in AlN-AlSiC and Al-AlSiC, with a notable presence of SiC particles. In contrast, three intermetallic phases - ..theta..-CuAl2, ..eta..-CuAl, and ..gamma..'- Cu9Al4 - were observed in the Cu-AlSiC bond. A computational solid-state diffusion model was developed to predict the intermetallic compounds (IMCs) formed during Cu-Al TLP bonding in each system, which supported the observation that an initial Cu volume fraction of 20 % in the material layers produced a final bond composition of >95 % Al with minimal IMC growth. However, increased Cu concentrations produced higher concentration gradients, leading to increased growth of IMCs, Kirkendall voids, and interstitial cracks.

DIRECT ENERGY CONVERSION↗

Advancing Urban Water Resilience: Coproducing Knowledge through Civic–Academic Global Partnerships on Water and Climate

As extreme weather events become more pronounced, the vulnerabilities associated with the urban water supply and wastewater systems in megacities are intensified in multiple interconnected dimensions. These multifaceted water challenges can benefit from enhanced cross-sectoral collaboration and sharing of critical knowledge, which are essential for sustainable and adaptive water governance frameworks. In this context, the Megacity Alliance for Water and Climate (MAWAC)–Europe and North America Region (ENAR) Working Group convened a workshop in March 2023, followed by a subsequent workshop in London, United Kingdom, from 11 to 13 September 2024. These workshops aimed to investigate and devise solutions for the cascading hazards with water systems. The solutions examined various aspects focused on climate adaptation and mitigation, stormwater management, and the governance of water and wastewater systems. Additionally, discussions highlighted the importance of community engagement, economic considerations, equity, and effective communication in addressing these pressing challenges. Over the course of 3 days, experts from academia, government agencies, and industry engaged in meaningful discussions on digital modeling for integrated water management, climate-informed urban planning, and public–private–academic partnerships (Fig. 1). Case studies from cities such as New York, Los Angeles, London, Paris, and Chicago highlighted innovative governance strategies for managing water and wastewater systems, promoting water reuse, planning infrastructure, and fostering stakeholder-driven and stakeholder-informed adaptation. The workshop participants emphasized the need for data-driven decision-making, scalable governance models, and knowledge-sharing networks to enhance urban water governance for sustainability and resilience. This workshop report presents the key takeaways from the 3-day convening, providing a roadmap for integrating scientific research, policy frameworks, and emerging technologies to address water challenges faced by megacities.

Hydrologic models↗

A Systematic, Polynomial-Cost Approach to Exact Correlation Energies (Final Technical Report)

The full configuration interaction (FCI) wave function provides the exact solution to the Schrödinger equation in a given basis set. While FCI is intractable due to exponential computational costs, the many-body expansion (or the method of increments) can reduce scaling to a low-order polynomial with system size. This project entailed advances in the incremental FCI (iFCI) approach, designed to allow iFCI to reach larger system sizes and maintain its intrinsic high accuracy. This document describes advances in solvers for iFCI, strategies to treat multiple charge and spin states, and virtual state management methods to reduce memory requirements. Overall, this project allows iFCI to correlate (for the first time) 142 valence electrons in 444 orbitals in a realistic model of a transition metal complex.

74 ATOMIC AND MOLECULAR PHYSICS↗

Results of Application Demonstration of Autonomous Offshore Power System Supporting Multiple Mobile and Static Assets

Over the last decade, several technology trends have dominated the innovation cycle within the terrestrial economy. Electrification, cloud computing, decarbonization, digitization, and autonomy are representative examples of macro trends that have had a rapid and fundamental impact; an impact felt not only in user-facing technologies, such as electric vehicles and software-as-a-service, but also in the infrastructure required to deliver those technologies. However, the scale of the impact and rollout has not been felt equally between the terrestrial and ocean economies. Here, the innovation cycle in the ocean economy is significantly slower. What accounts for the difference and are there solutions to this issue?

16 TIDAL AND WAVE POWER↗

Smart-PGSim: Using Neural Network to Accelerate AC-OPF Power Grid Simulation

In this work we address the problem of accelerating complex power-grid simulation through machine learning ( ML). Specifically, we develop a framework, Smart-PGSim,which generates multitask-learning (MTL) neural network (NN)models to predict the initial values of variables critical to the problem convergence. MTL models allow information sharing when predicting multiple dependent variables while including customized layers to predict individual variables. We show that,to achieve the required accuracy, it is paramount to embed domain-specific constraints derived from the specific power-grid components in the MTL model. Smart-PGSim then employs the predicted initial values as a high-quality initial condition for the power-grid numerical solver (warm start), resulting in both higher performance compared to state-of-the-art solutions while maintaining the required accuracy. Smart-PGSim brings 2.60×speedup on average (up to 3.28×) computed over 10,000 problems, without losing solution optimality.

machine learning, neural networks↗

Phase segregation mechanisms of small molecule-polymer blends unraveled by varying polymer chain architecture

As phase separation between the small-molecule semiconductor and the polymer binder is the key enabler of blend-based organic field-effect transistors (OFETs) fabricated by low-cost solution processing, it is crucial to understand the underlying phase separation mechanisms that determine the phase morphology, which significantly impacts device performance. Beyond the parameter space investigated in previous work, here we investigate the formation of blends by varying the branch architecture of the polymer binder and by shortening the solvent dry time using ultrasonic spray casting. The phase morphologies of the resulting blend films have been thoroughly characterized with a variety of techniques in three dimensions over multiple length scales, including AFM, energy-filtered transmission electron microscope, and neutron reflectivity, and have been correlated with electrical transport performance. From the results, we have inferred that the phase morphology is kinetically determined, limited by the inherent slow movement of polymer macromolecules. The kinetic picture, supported by molecular dynamics modeling, not only consistently explains our observations but also resolves inconsistencies in previous works. The achieved mechanistic understanding will guide further optimization of blend-based organic electronics, such as OFETs and organic photovoltaics.

36 MATERIALS SCIENCE↗

Influence of Application Method on Disinfectant Byproduct Formation during Indoor Bleach Cleaning: A Case Study on Phenol Chlorination

Modern disinfection methods increasingly utilize droplet dispersal as a means of delivering disinfectant within an indoor space. Such an application produces droplets over wide size ranges, some of which may remain airborne for minutes to hours while serving as small reaction environments. We report here the formation of chlorophenolic disinfection byproducts (DBPs) during the injection of bleach microdroplets into an environmental chamber. These reactions within airborne microdroplets are driven by phenol dissolution and availability, and the observed DBPs span multiple generations of chlorination chemistry. DBPs representing successive chlorine addition to the phenol ring are initially observed (mono-, di-, and trichlorophenol), followed by DBPs that lack aromaticity (2,6-dichlorobenzoquinone and 2,4,4,6-tetrachloro-2,5-cyclohexadienone, among others). Chlorophenolic DBPs have not been reported during prior work examining indoor bleach cleaning and we attribute their observation in this work to the dispersal of disinfectant microdroplets rather than traditional mopping or wiping with a bulk aqueous solution on an indoor surface. Airborne microdroplets represent unique reaction and volatilization environments and unique exposure pathways to DBPs, via direct compound inhalation as well as the inhalation of DBP-containing microdroplets. The observed DBPs (particularly 2,6-dichlorobenzoquinone) have previously been linked to adverse health effects in humans through either direct toxicity or as precursors to other DBPs with adverse health effects. In conclusion, these measurements suggest that more work is needed to understand potential DBP formation and human exposure within a variety of indoor environments where disinfection techniques that generate airborne microdroplets are used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep Learning for Simultaneous Inference of Hydraulic and Transport Properties

Abstract Identification of a heterogeneous conductivity field and reconstruction of a contaminant release history are key aspects of subsurface remediation. These two goals are achieved by combining model predictions with sparse and noisy hydraulic head and concentration measurements. Solution of this inverse problem is notoriously difficult due to, in part, high dimensionality of the parameter space and high computational cost of repeated forward solves. We use a convolutional adversarial autoencoder (CAAE) to parameterize a heterogeneous non‐Gaussian conductivity field via a low‐dimensional latent representation. A three‐dimensional dense convolutional encoder‐decoder (DenseED) network serves as a forward surrogate of the flow and transport model. The CAAE‐DenseED surrogate is fed into the ensemble smoother with multiple data assimilation (ESMDA) algorithm to sample from the Bayesian posterior distribution of the unknown parameters, forming a CAAE‐DenseED‐ESMDA inversion framework. The resulting CAAE‐DenseED‐ESMDA inversion strategy is used to identify a three‐dimensional contaminant source and conductivity field. A comparison of the inversion results from CAAE‐ESMDA with physical flow and transport simulator and from CAAE‐DenseED‐ESMDA shows that the latter yields accurate reconstruction results at the fraction of the computational cost of the former.

Zhou, Zitong↗

Autonomous platform for solution processing of electronic polymers

The manipulation of electronic polymers’ solid-state properties through processing is crucial in electronics and energy research. Yet, efficiently processing electronic polymer solutions into thin films with specific properties remains a formidable challenge. We introduce Polybot, an artificial intelligence (AI) driven automated material laboratory designed to autonomously explore processing pathways for achieving high-conductivity, low-defect electronic polymers films. Leveraging importance-guided Bayesian optimization, Polybot efficiently navigates a complex 7-dimensional processing space. In particular, the automated workflow and algorithms effectively explore the search space, mitigate biases, employ statistical methods to ensure data repeatability, and concurrently optimize multiple objectives with precision. The experimental campaign yields scale-up fabrication recipes, producing transparent conductive thin films with averaged conductivity exceeding 4500 S/cm. Feature importance analysis and morphological characterizations reveal key design factors. This work signifies a significant step towards transforming the manufacturing of electronic polymers, highlighting the potential of AI-driven automation in material science.

Wang, Chengshi [Argonne National Laboratory (ANL),↗

Identifying and characterizing ultracool dwarfs ejected from post-encounter disintegrating systems

ABSTRACT Disintegrating multiple systems have been previously discovered from kinematic studies of the Hipparcos catalogue. They are presumably the result of dynamical encounters taking place in the Galactic disc between single/multiple systems. In this paper, we aim to expand the search for such systems, to study their properties, as well as to characterize possible low-mass ejecta (i.e. brown dwarfs and planets). We have assembled a list of 15 candidate systems using astrometry from the Tycho-Gaia astrometric solution (later upgraded with Gaia DR3), and here we present the discovery and follow-up of five of them. We have obtained DECam imaging for all five systems and by combining near-infrared photometry and proper motion, we searched for ultracool ejected components. We find that the system consisting of TYC 7731-1951-1, TYC 7731-2128 AB, and TYC 7731-1995-1ABC?, contains one very promising ultracool dwarf candidate. Using additional data from the literature, we have found that three out of five disintegrating system candidates are likely to be true disintegrating systems.

Astronomy & Astrophysics↗

Controlled environment agriculture: An opportunity to strengthen interagency research collaboration in the US government

Challenges facing food production and agricultural systems are increasingly interconnected with economic, security, health, and equity issues, among others. Threats such as extreme weather, economic volatility, and shrinking water resources and arable land, influence our ability to maintain a safe and resilient food supply. One promising solution to these threats is controlled environment agriculture (CEA). In many cases, CEA can drastically reduce the amount of water and land used in crop production while increasing productivity. Operations may be established in nearly any environment and harvests can take place year-round, supporting food system resiliency and sustainability. CEA sits at the nexus of a number of disciplines and industries, making it well suited for transdisciplinary and multi-institutional research coordination. Herein, authors from multiple US government agencies present CEA as a case study in improving cross-agency research collaboration. The federal government houses a range of scientific expertise and research capabilities, positioning scientists to lead national and global efforts in transdisciplinary, interagency approaches to complex challenges. Navigating cross-agency collaboration can be a challenge, especially coordinating across different scientific disciplines, geographic locations, and funding mechanisms. To enhance multiagency efforts, collaborators could prioritize (i) organizing personnel and resources, (ii) enhancing existing multiagency collaborations, and (iii) focusing on further opportunities for coordination. Adopting these approaches could enable federal researchers to reinforce and advance academic and industry efforts to address current CEA challenges while solidifying the United States as a leader in this arena.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗