SEARCH · Engineering Papers

Results for “monotonicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Thunderstorm cloud top dynamics as inferred from satellite observations and models

Satellite observations of convective towers penetrating the tropopause are summarized. Three classes of thunderstorm cloud tops including storm tops that have a monotonic temperature-height pattern with the highest point being the coldest point (class 1), tops that have a colocated cold and high point with the warm point on the downward slope to the rear of the highest point (class 2), and tops in which the cold point is offset upwind from the high point, with a cold-warm couplet straddling the convective cloud top (class 3), are described. A one-dimensional cloud parcel model applied in the overshooting region is used to explore the causes of the storm top's unique temperature/height structures.

Adler, R. F.↗

NASA NTRS1985

Unified constitutive material models for nonlinear finite-element structural analysis

Unified constitutive material models were developed for structural analyses of aircraft gas turbine engine components with particular application to isotropic materials used for high-pressure stage turbine blades and vanes. Forms or combinations of models independently proposed by Bodner and Walker were considered. These theories combine time-dependent and time-independent aspects of inelasticity into a continuous spectrum of behavior. This is in sharp contrast to previous classical approaches that partition inelastic strain into uncoupled plastic and creep components. Predicted stress-strain responses from these models were evaluated against monotonic and cyclic test results for uniaxial specimens of two cast nickel-base alloys, B1900+Hf and Rene 80. Previously obtained tension-torsion test results for Hastelloy X alloy were used to evaluate multiaxial stress-strain cycle predictions. The unified models, as well as appropriate algorithms for integrating the constitutive equations, were implemented in finite-element computer codes.

Kaufman, A.↗

NASA NTRS1985

Plasma deposited hydrogenated carbon on GaAs and InP

The properties of diamond like carbon films grown by RF flow discharge 30 kHz plasma using methane are reported. The Cis XPS line shape of films showed localized hybrid carbon bonds as low as 40 to as high as 95 percent. Infrared spectroscopy and N(15) nuclear reaction profiling data indicated 35 to 42 percent hydrogen, depending inversely on deposition temperature. The deposition rate of films on Si falls off exponentially with substrate temperature, and nucleation does not occur above 200 C on GaAs and InP. Optical data of the films showed bandgap values of 2.0 to 2.4 eV increasing monotonically with CH4 flow rate.

Warner, J. D.↗

NASA NTRS1985

Colors of reflection nebulae. I - Phase function effects in the Merope nebula

The subject of color differences between reflection nebulae and their illuminating stars is reexamined in the light of developments of observational techniques, permitting accurate surface-brightness photometry over an expanded spectral region from the UV to the IR. Color-color diagrams for reflection nebulae can yield useful information about the wavelength dependence of the scattering properties of nebular dust without excessive sensitivity to the specific nebular geometry or the presence of multiple scattering, resulting in considerable savings in computational efforts. As an illustration, the color-difference method was applied to existing data for the Merope nebula, covering the spectral region 1550-5500 A. Strong evidence for a monotonically changing phase function of scattering at wavelengths less than or equal to 3500 A is found. The result is interpreted in the context of a plausible geometry for the Merope environment as providing support for a bimodal size distribution of nebular dust grains.

Witt, A. N.↗

NASA NTRS1985

Momentum-dependent diffusive particle acceleration in modified shock fronts

In the presently derived analytic solutions of the steady transport equation for diffusive particle acceleration in a modified, planar shock front having free escape boundaries, the fluid velocity profile through the shock transition decreases monotonically between the upstream and downstream boundaries. The spatial diffusion coefficient's spatial dependence is linked to that of the fluid velocity profile. Attention is given to the solution corresponding to monoenergetic particle injection at the shock front, with free particle escape at finite distances both upstream and downstream of the shock. The accelerated particle spectrum is dominated at high energies by an exponential cutoff, due to the competition between acceleration by the first-order Fermi mechanism and particle loss through the free escape boundaries.

Webb, G. M.↗

NASA NTRS1985

High resolution TVD schemes using flux limiters

Roe (1981, 1985) has utilized flux limiters to obtain second order monotonicity preserving schemes. In the present paper, the foundation for flux limiters in the formulation of first order three-point schemes are discussed, and a systematic outline is provided of the method of using flux limiters to obtain second order accurate TVD schemes. Attention is given to Phi limiters, the Van Leer limiter, the Chakravarthy-Osher limiter, the linear advection equation and square wave data, the inviscid Burger's equation, and the extension of flux limiters to irregular grids, systems of equations, and implicit calculations.

Sweby, P. K.↗

NASA NTRS1983

Creep fatigue life prediction for engine hot section materials (isotropic)

The activities performed during the first year of the NASA HOST Program, Creep Fatigue Life Prediction for Engine Hot Section Materials (Isotropic), being conducted by Pratt & Whitney Aircraft are summarized. The program is a 5 year, two part effort aimed at improving the high temperature crack initiation prediction technology for gas turbine hot section components. Significant results of the program produced thus far are discussed. Cast B1900 + Hf and wrought IN 718 were selected as the base and alternate materials, respectively. A single heat of B1900 + Hf was obtained and test specimens fabricated. The material was characterized with respect to grain size, gamma prime size, carbide distribution, and dislocation density. Monotonic tensile and creep testing has shown engineering properties within anticipated scatter for this material. Examination of the tensile tests has shown a transition from inhomogeneous planar slip within the grains at lower temperatures to more homogeneous matrix deformation. Examination of the creep tests has shown a transgranular failure mode at 1400 F and an intergranular failure mode at 1600 F and 1800 F.

Moreno, V.↗

NASA NTRS1986

Axial and torsional fatigue behavior of Waspaloy

The cyclic flow response and crack growth behavior of Waspaloy at room temperature and 650 C under tensile loading and torsional loading was studied, for two conditions of Waspaloy: fine grain, large gamma prime size; coarse grain, small gamma prime size. The fine grain material showed 5 to 10 percent hardening after about 10 percent of life, with sequent softening to failure at both themperature levels. The coarse grain material showed either stable response or monotonic softening to failure. Early crack initiation was observed on planes of maximum shear, with eventual branching to principle planes under torsional loading; cracks were always normal to load axis under tensile loading. Also, crack paths were intergranular at 650 C, mostly transgranular at room temperature.

Zamrik, S.↗

NASA NTRS1985

Nonlinear forcing of planetary scale waves by amplifying unstable baroclinic eddies generated in the troposphere

The present investigation is mainly concerned with isolating the effects of wave-wave coupling on the growth of planetary-scale baroclinic modes of zonal wavenumber 1-3. It is shown that a global distribution of amplifying intermediate-scale baroclinic modes can cause rapid growth of planetary-scale modes. The growth rates of the planetary modes are found to be comparable to the growth rates of the most unstable baroclinic modes during the first 5-10 days. Thereafter the planetary waves continue to grow (albeit at a slower rate and not necessarily monotonically), and do not exhibit a decay phase as pronounced as that which is characteristic of the intermediate-scale modes.

Young, R. E.↗

NASA NTRS1985

VLA observations of solar active regions at closely spaced frequencies - Evidence for thermal cyclotron line emission

VLA observations of a solar active region at 10 closely spaced frequencies between 1440 and 1720 MHz are presented. The synthesis maps show, on two successive days, significant changes in the brightness temperature within this narrow frequency range. It is shown that these changes cannot be due to either thermal bremsstrahlung or gyroresonance emission from a coronal loop in wich the temperature, density, or magnetic field varies monotonically with height. Instead, the brightness spectrum is attributed to cyclotron line emission from a narrow layer, where the temperature is elevated above the surrounding part of the loop.

Willson, R. F.↗

NASA NTRS1985

Delta wings with shock-free cross flow

In order to have a high level of maneuverability, supersonic delta wings should have a cross flow that is free of embedded shock waves. The conical cross flow sonic surface differs from that of plane transonic flow in many aspects. Well-known properties such as the monotone law are not true for conical cross flow sonic surfaces. By using a local analysis of the cross flow sonic line, relevant conditions for smooth cross flow are obtained. A technique to artificially construct a smooth sonic surface and an efficient numerical method to calculate the flow field are used to obtain cones with smooth cross flow.

Sritharan, S. S.↗

NASA NTRS1986

Robustness properties of collocated controllers for flexible spacecraft

Robustness properties are investigated for two types of controllers for large flexible space structures, which use collocated sensors and actuators. The first type is an attitude controller which uses negative definite feedback of measured attitude and rate, while the second type is a damping enhancement controller which uses only velocity (rate) feedback. It is proved that collocated attitude controllers preserve closed loop global asymptotic stability when linear actuator/sensor dynamics satisfying certain phase conditions are present, or monotonic increasing nonlinearities are present. For velocity feedback controllers, the global asymptotic stability is proved under much weaker conditions. In particular, they have 90 phase margin and can tolerate nonlinearities belonging to the (0, infinity) sector in the actuator/sensor characteristics. The results significantly enhance the viability of both types of collocated controllers, especially when the available information about the large space structure (LSS) parameters is inadequate or inaccurate.

Joshi, S. M.↗

NASA NTRS1985

Repeatability of mixed-mode adhesive debonding

The repeatability of debond growth rates in adhesively bonded subjected to constant-amplitude cyclic loading was studied. Debond growth rates were compared from two sets of cracked-lap-shear specimens that were fabricated by two different manufacturers and tested in different laboratories. The fabrication method and testing procedures were identical or both sets of specimens. The specimens consisted of aluminum adherends bonded with FM-73 adhesive. Critical values of strain-energy-release rate were also determined from specimens that were monotonically loaded to failure. The test results showed that the debond growth rates for the two sets of specimens were within a scatter band which is similar to that observed in fatigue crack growth in metals. Cyclic debonding occurred at strain-energy-release rates that were more than an order of magnitude less than the critical strain-energy-release rate in static tests.

Everett, R. A., Jr.↗

NASA NTRS1985

Shock modelling in transonic and supersonic flow

Numerical simulation studies of problems in transonic flow are conducted in connection with the design of aircraft flying near the speed of sound, while recently there has also been a great deal of interest in supersonic and hypersonic flow calculations. Three important models for inviscid compressible gasdynamics are utilized in the study of these flow problems, taking into account the transonic small disturbance equation (TSD), the transonic full potential equation (FP), and the full Euler equations for compressible gasdynamics (EU). The present paper has the objective to provide a description of shock capturing methods recently developed for each model. The design principles behind the algorithms are also examined, giving attention to consistency, conservative form, monotone and sharp discrete shocks, and a bound on the variation, which prevents spurious oscillations.

Osher, S.↗

NASA NTRS1986

Creep of chemically vapour deposited SiC fibres

The creep, thermal expansion, and elastic modulus properties for chemically vapor deposited SiC fibers were measured between 1000 and 1500 C. Creep strain was observed to increase logarithmically with time, monotonically with temperature, and linearly with tensile stress up to 600 MPa. The controlling activation energy was 480 + or - 20 kJ/mole. Thermal pretreatments near 1200 and 1450 C were found to significantly reduce fiber creep. These results coupled with creep recovery observations indicate that below 1400 C fiber creep is anelastic with negligible plastic component. This allowed a simple predictive method to be developed for describing fiber total deformation as a function of time, temperature, and stress. Mechanistic analysis of the property data suggests that fiber creep is the result of beta-SiC grain boundary sliding controlled by a small percent of free silicon in the grain boundaries.

Dicarlo, J. A.↗

NASA NTRS1985

Hidden carbon dioxide on Mars

A recent proposal that much of the outgassed CO2 on Mars is tied up in the planet's crust in the form of carbonate mineral is discussed. According to this hypothesis, carbonate formation on Mars continued after open bodies of liquid water became unstable. A consequence of the hypothesis is that, in the absence of a recycling mechanism for CO2, the surface pressure on Mars will monotonically decrease until it reaches the minimum atmospheric overburden pressure required for liquid water to form. The theory explains Mars' low surface pressure, and also implies that the climate of Mars has evolved linearly over geologic time, rather than cyclically.

Haberle, R. M.↗

NASA NTRS1985

Review of recent laboratory double layer experiments

Recent laboratory measurements of double layers are reviewed. Most experiments that are considered employed triple plasma devices or Q-machines. It is shown that a variety of both one and three dimensional phenomena have been achieved. Stationary one and three dimensional structures consist of monotonic double layers, very weak, weak, strong and very strong double layers with potential steps e(phi)/T(e) equal to about 1, less than, greater than, and much greater than 10, respectively. Multiple double layers consist of structures with large potential dips on the low potential side and stairstep double layers. Two and three dimensional structures include multiple double layers, which resemble U shaped double layers, and ionization produced strong double layers. Moving double layers include ion acoustic double layers and double layers which are the result of drifting species and mismatches at plasma boundaries. It appears that double layers can be BGK solutions or related to turbulence. Double layer creation can occur in a variety of different ways. Ionization can sometimes be important and sometimes play no role at all.

Hershkowitz, N.↗

NASA NTRS1986

Measurement and application of fault latency

The time interval between the occurrence of a fault and the detection of the error caused by the fault is divided by the generation of that error into two parts: fault latency and error latency. Since the moment of error generation is not directly observable, all related works in the literature have dealt with only the sum of fault and error latencies, thereby making the analysis of their separate effects impossible. To remedy this deficiency, (1) a new methodology for indirectly measuring fault latency is presented; the distribution of fault latency is derived from the methodology; and (3) the knowledge of fault latency is applied to the analysis of two important examples. The proposed methodology has been implemented for measuring fault latency in the Fault-Tolerant Multiprocessor (FTMP) at the NASA Airlab. The experimental results show wide variations in the mean fault latencies of different function circuits within FTMP. Also, the measured distributions of fault latency are shown to have monotone hazard rates. Consequently, Gamma and Weibull distributions are selected for the least-squares fit as the distribution of fault latency.

Shin, K. G.↗