Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model analyses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Wind tunnel studies of Martian aeolian processes

In order to determine the nature of Martian aeolian processes, an investigation is in progress which involves wind tunnel simulations, geologic field studies, theoretical model studies, and analyses of Mariner 9 imagery; this report presents the preliminary results. Threshold speed experiments were conducted for particles ranging in relative density from 1.3 to 11.35 and diameter from 10.2 to 1290 microns to verify and better define Bagnold's (1941) expression for grain movement, particularly for low particle Reynolds numbers and to study the effects of aerodynamic lift and surface roughness. Wind tunnel simulations were conducted to determine the flow field over raised rim craters and associated zones of deposition and erosion.

Greeley, R.↗

A sensitivity analysis of regional and small watershed hydrologic models

Continuous simulation models of the hydrologic behavior of watersheds are important tools in several practical applications such as hydroelectric power planning, navigation, and flood control. Several recent studies have addressed the feasibility of using remote earth observations as sources of input data for hydrologic models. The objective of the study reported here was to determine how accurately remotely sensed measurements must be to provide inputs to hydrologic models of watersheds, within the tolerances needed for acceptably accurate synthesis of streamflow by the models. The study objective was achieved by performing a series of sensitivity analyses using continuous simulation models of three watersheds. The sensitivity analysis showed quantitatively how variations in each of 46 model inputs and parameters affect simulation accuracy with respect to five different performance indices.

Ambaruch, R.↗

Burning of liquid pools in reduced gravity

The existing literature on the combustion of liquid fuel pools is reviewed to identify the physical and chemical aspects which require an improved understanding. Among the pre-, trans- and post-ignition processes, a delineation was made of those which seem to uniquely benefit from studies in the essential environment offered by spacelab. The role played by the gravitational constant in analytical and experimental justifications was developed. The analytical justifications were based on hypotheses, models and dimensional analyses whereas the experimental justifications were based on an examination of the range of gravity and gravity-dependent variables possible in the earth-based laboratories. Some preliminary expositions into the questions of feasibility of the proposed spacelab experiment are also reported.

Kanury, A. M.↗

Elevated-temperature effects on strain gages on the YF-12A wing

A general study is made of the effects of structural heating on calibrated-strain-gage load measurements on the wing of a supersonic airplane. The primary emphasis is on temperature-induced effects as they relate to slope changes and thermal shifts of the applied load/strain relationships. These effects are studied by using the YF-12A airplane, a structural computer model, and subsequent analyses. Such topics as the thermal environment of the structure, the variation of load paths at elevated temperature, the thermal response characteristics of load equations, elevated-temperature load-measurement approaches, the thermal calibration of wings, and the correlation of strains are discussed. Ways are suggested to measure loads with calibrated strain gages in the supersonic environment.

Jenkins, J. M.↗

Origin of the Moon: Constraints from volatile elements

Supporting arguments for the lunar fusion hypothesis include the low density of the Moon corresponding to the density of the Earth's mantle and the low volatile content of the lunar rocks vs. those of terrestrial origin. Vapor pressures of the alkali elements and their oxides increase in the following order: Na, K, Rb and Cs. The Moon should, therefore, be more depleted in Cs relative to Rb, Rb relative to K, and K relative to Na than the Earth if the fission model is correct. Analyses of lunar mare basalts and terrestrial mid-ocean ridge and other young basalts indicate that this behavior is not observed. It is possible that monovalent alkali elements might be lost from silicate materials in a different order than that inferred from elemental and oxide vapor pressures, as a result of differences in the way they are bound in silicate materials. To test this hypothesis a series of experiments was conducted to investigate alkali loss at high temperatures. Analyses indicate that the behavior of volatiles dissolved in a silicate melt is similar to that inferred from elemental and oxide vapor pressures. It is concluded that alkali element ratios in the Earth and Moon are not readily interpreted in terms of the fission hypothesis.

Kreutzberger, M. E.↗

Numerical Modeling of the Atmosphere

Numerical models and numerical analyses of observations were used to improve the understanding of the physical processes important in global weather and climate. Results from a study of the effect of baroclinic waves on mid-latitude vertical temperature structure show that the waves' vertical eddy heat flux tend to eliminate the potential vorticity gradient near the steering level by causing the static stability to decrease rapidly with height in the lower troposphere above the boundary layer. An empirical study of the relationship between eddy heat fluxes and the meridional temperature gradient has been completed. The results indicate that the feedback in the flux-gradient system is comparable to dissipation on all time scales between the synoptic and the seasonal. The definition of the Eliassen-Palm flux and the Eliassen-Palm and non-acceleration theorems has been generalized to include eddy forcing of condensation. Calculations based on the generalized diagnostics showed that the annual mean eddy forcing of the zonal mean zonal wind is two and one half times stronger when the condensation effects are included.

Stone, P. H.↗

The Use of Available Potential Energy to Evaluate Two GLAS FGGE Data Sets

Meteorological data derived from satellites provided an essential component of the FGGE data sets, especially in data sparse regions of the globe. The impact of satellite derived observations on objective analyses and numerical model predictions are investigated. The FGGE data sets and resulting numerical forecasts and the ability to define the available potential energy of the atmosphere, and its relationship to synoptic scale features such as extratropical cyclones are studied.

Horn, L. H.↗

The growth of metastable peritectic compounds

The influence of gravitationally driven convection on the directional solidification of peritectic alloys was evaluated. The Pb-Bi peritectic was studied as a model solidification system. Analyses of directionally solidified Pb-Bi peritectic samples indicate that appreciable macrosegregation occurs due to thermosolutal convection and/or Soret diffusion. The macrosegregation results in sequantial change of phase and morphology as solidification progresses down the length of the sample. Banding was eliminated when furnace conditions were selected which resulted in a planar solidification interface. The directional solidification that occurs in the vicinity of the Pb-Bi peritectic isothermal was found to be isocompositional and to consist solely of the equilibrium terminal solid solution and peritectic phases on an extremely fine scale. Evidence was found to support the peritectic supercooling mechanism, but not the proposed peritectic superheat mechanism.

Larson, D. J., Jr.↗

Viscoplastic constitutive relationships with dependence on thermomechanical history

Experimental evidence of thermomechanical history dependence in the cyclic hardening behavior of some common high-temperature structural alloys is presented with special emphasis on dynamic metallurgical changes. The inadequacy of formulating nonisothermal constitutive equations solely on the basis of isothermal testing is discussed. A representation of thermoviscoplasticity is proposed that qualitatively accounts for the observed hereditary behavior. This is achieved by formulating the scalar evolutionary equation in an established viscoplasticity theory to reflect thermomechanical path dependence. To assess the importance of accounting for thermomechanical history dependence in practical structural analyses, two qualitative models are specified: (1) formulated as if based entirely on isothermal information; (2) to reflect thermomechanical path dependence using the proposed thermoviscoplastic representation. Predictions of the two models are compared and the impact the calculated differences in deformation behavior may have on subsequent lifetime predictions is discussed.

Robinson, D. N.↗

Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy Rene N4. 3: Tension-compression anisotropy

Single crystal superalloy specimens with various crystallographic directions along their axes were tested in compression at room temperature, 650, 760, 870, and 980 deg C. These results are compared with the tensile behavior studied previously. The alloy, Rene N4, was developed for gas turbine engine blades and has the nominal composition 3.7 Al, 4.2 Ti, 4 Ta, 0.5 Nb, 6 W, 1.5 Mo 9 Cr. 7.5 Co, balance Ni, in weight percent. Slip trace analysis showed that primary cube slip occurred even at room temperature for the 111 specimens. With increasing test temperature more orientations exhibited primary cube slip, until at 870 deg C only the 100 and 011 specimens exhibited normal octahedral slip. The yield strength for octahedral slip was numerically analysed using a model proposed by Lall, Chin, and Pope to explain deviations from Schmid's Law in the yielding behavior of a single phase Gamma prime alloy, Ni3(Al, Nb). The Schmid's Law deviations in Rene N4 were found to be largely due to a tension-compression anisotropy. A second effect, which increases trength for orientations away from 001, was found to be small in Rene N4. Analysis of recently published data on the single crystal superalloy PWA 1480 yielded the same result.

Miner, R. V.↗

Transonic test of a forward swept wing configuration exhibiting Body Freedom Flutter

The aeroelastic dynamic instability designated Body Freedom Flutter (BFF) involves aircraft pitch and wing bending motions characteristic of forward swept wing (FSW) aircraft. Attention is presently given to the results of tests conducted on a 1/2-scale cable-mounted FSW wind tunnel model, with and without relaxed static stability (RSS) control conditions. BFF instability boundaries were found to occur at significantly lower air speeds than those associated with aeroelastic wing divergence on the same model. Servoaeroelastic stability analyses have been conducted which proved capable of predicting the measured onset of BFF, in both the statically stable and RSS configurations tested.

Chipman, R.↗

Revised planetary protection policy for solar system exploration

In order to control contamination of planets by terrestrial microorganisms and organic constituents, U.S. planetary missions have been governed by a planetary protection (or planetary quarantine) policy which has changed little since 1972. This policy has recently been reviewed in light of new information obtained from planetary exploration during the past decade and because of changes to, or uncertainties in, some parameters used in the existing quantitative approach. On the basis of this analysis, a revised planetary protection policy with the following key features is proposed: deemphasizing the use of mathematical models and quantitative analyses; establishing requirements for target planet/mission type (i.e., Orbiter, Lander, etc.) combinations; considering sample return missions a separate category; simplifying documentation; and imposing implementing procedures (i.e., trajectory biasing, cleanroom assembly, spacecraft sterilization, etc.) by exception, i.e., only if the planet/mission combination warrants such controls.

Devincenzi, D. L.↗

Extremely metal-deficient red giants. IV - Equivalent widths for 36 halo giants

Further work on a study of 36 metal-poor field red giants is reported. Chemical abundances previously determined were based on model stellar atmosphere analyses of equivalent widths from photographic image-tube echelle spectrograms obtained with with 4-m reflectors at Kitt Peak and Cerro Tololo. A tabulation of the equivalent-width data (a total of 18, 275 equivalent widths) is presented.

Luck, R. E.↗

Cometary dynamics

Modern theories of cometary dynamics are described. Attention is given to Oort's hypothesis that the Solar System is surrounded by a spherically symmetrical cloud of about 10 to the 11th to 10 to the 12th comets extending out to interstellar distances. Dynamical modelling and statistical analyses of cometary motion have confirmed the ability of the Oort hypothesis to explain the observed distribution of energies for the long-period cometary orbits. Some of the sources cometary motion perturbations are discussed, including: random passing stars; interstellar clouds; and the galactic gravitational field. Perturbations in cometary motion in the planetary region are attributed to the gravitational fields of the major planets and nongravitational forces resulting from jetting of volatiles on the surfaces of cometary nuclei. Observational evidence for the existence of a massive inner Oort cloud extending from just beyond the orbit of Neptune to 10,000 AU is presented.

Weissman, P. R.↗

Flight flutter testing at Ames-Dryden

Over the past several years the NASA Ames-Dryden Flight Research Facility at Edwards Air Force Base has developed a variety of flight flutter and ground test techniques which have been applied to an assortment of new or modified aerospace research vehicles. This paper presents a summary of these techniques and the experiences gained from these applications. Topics discussed include the roles of ground vibration testing, flight flutter testing, wind tunnel flutter model testing, predictive analyses, and aeroservoelastic considerations. Data are presented for a wide variety of aircraft, including remotely piloted vehicles, modern fighters with relaxed static stability and highly augmented flight control systems, aircraft modified for laminar flow control experiments, a glider modified for deep stall tests, and aircraft with skewed or forward swept wings. The conclusions include a brief discussion of future directions in flight flutter testing at Ames-Dryden.

Felt, L. R.↗

Coupled morphological and convective instabilities in a microgravity environment

The role of convection during crystal growth from the melt is discussed in terms of dimensionless groups of material parameters and control variables. The limitations of such analyses and of models in which the crystal-melt interface is treated as a rigid boundary are reviewed. The interaction of thermosolutal convective instabilities with morphological instabilities is discussed for unidirectional solidification, emphasizing suppression of convective instabilities in a microgravity environment and/or a static magnetic field.

Sekerka, R. F.↗

High-resolution spectroscopy of the z = 1.79 absorption-line system toward B2 1225 + 317

The results of Multiple Mirror Telescope echelle spectroscope scans of species in the z = 1.79 system toward the quasar B2 1225 + 317 are reported. The campaign was undertaken to compare quasar absorption-line systems with gas absorption lines in other galaxies. Relative column densities obtained for Zn II, Si II, Mg II, Fe II and H I were similar to those observed for the interstellar medium. Data analyses with photoionization models for the radiation field above the Lyman limit yielded upper and lower limits to the specific intensity at 1000 A that were consistent with the UV radiation field in the halo of a spiral galaxy.

Bechtold, Jill↗

Laser Doppler velocimeter measurement of annulus wall boundary layer development in a compressor rotor

Detailed measurement of the flow field in the tip region of a compressor rotor was carried out using LDV. The axial and tangential components of relative velocities were measured upstream, inside the passage, and at the exit of the rotor, up to about 20 percent of the blade span from the blade tip. The annulus-wall boundary layer is well behaved at the leading edge and far downstream of the rotor. But inside the passage, complex interactions between the leakage flow and the annulus-wall boundary layer result in unconventional profiles with wide deviations from models employed for analyses.

Lakshminarayana, B.↗