Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Thermal Behavior and Structural Analysis of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) System

This study focuses on the preparation of Li{sub 2}O-TiO{sub 2}-P{sub 2}O{sub 5}(LTP) by mechanical milling (MM) method at 600 rpm. The samples were milled for 40 hours using 5 mm size ball-mill. The samples underwent different heat treatment and its conductivity behavior was investigated. Thermal and structural analysis of the highest conducting LTP system was investigated by means of TGA-DSC, XRD, and laser particle sizer respectively. An increase in the crystallinity of the samples was observed with increase in sintering temperature. The particle sizes of the samples were also observed to increase with increase in crystallinity. The samples that underwent heat treatment exhibit higher conductivity values with a value of 5.59x10{sup -4} Scm{sup -1} at 800 deg. C.

36 MATERIALS SCIENCE↗

Ion-beam induced domain structure in piezoelectric PMN-PT single crystal

We report an investigation of the domain structure in Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-30%PbTiO{sub 3} single crystals after ion milling. We show that ion milling induces microdomains, typically 0.1-1 {mu}m in size. The induced microdomains disappear after temperature annealing or electric poling, leaving behind nanodomains of a few nanometers in size. We attribute the microdomains to surface stress induced by ion milling. The results demonstrate the general importance of separating sample preparation artifacts from the true domain structure in the study of ferroic materials.

36 MATERIALS SCIENCE↗

Effect of Magnesium Doping on Structural and Optical Properties of ZnO Nanoparticles Synthesized by Mechanochemical Processing

This paper presents the structural and optical properties of magnesium doped zinc oxide nanoparticles synthesized by mechanochemical processing. ZnO nanoparticles of different crystallite size were synthesized by milling the precursor materials for 5 h in a high energy planetary ball mill in Zr{sub 2}O{sub 3} media. NaCl was added as diluent to control the reaction rate in order to avoid the growth of nanoparticles. The milled powders were heat treated at 600 deg. C and then NaCl was leached out using distilled water. X-ray Diffraction (XRD) technique was employed for the phase and crystallite size analysis of the nanoparticles. Crystallite sizes were calculated from the XRD peak broadening using the Sherrer's formula. Scanning Electron Microscope was employed to analyze the particle morphology and size distribution of the Mg doped ZnO nanoparticles. Ultraviolet-Visible (Uv-Vis) spectroscope also was employed to analyze the optical absorption of the ZnO nano particles. Tauc plots were used to determine the energy gap of the nanoparticles samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quasi-Classical Model in SU(N) Gauge Field Theory

The quasi-classical model in a gauge theory with the Yang-Mills (YM) field is developed. On a basis of the exact solution of the Dirac equation in the SU(N) gauge field which is in the eikonal approximation the Yang-Mills equations containing an external current are solved. The developed model proves to have the self-consistent solutions of the Dirac and Yang-Mills equations at N{>=}3. The derived solutions take place provided that the fermion and gauge fields exist together, so that the fermion current completely compensates the current generated by the gauge field due to its self-interaction. The obtained solutions are considered in the context of QCD.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structure and magnetic properties of low-temperature phase Mn-Bi nanosheets with ultra-high coercivity and significant anisotropy

The microstructure, crystal structure, and magnetic properties of low-temperature phase (LTP) Mn-Bi nanosheets, prepared by surfactant assistant high-energy ball milling (SA-HEBM) with oleylamine and oleic acid as the surfactant, were examined with scanning electron microscopy, X-ray diffraction, and vibrating sample magnetometer, respectively. Effect of ball-milling time on the coercivity of LTP Mn-Bi nanosheets was systematically investigated. Results show that the high energy ball milling time from tens of minutes to several hours results in the coercivity increase of Mn-Bi powders and peak values of 14.3 kOe around 10 h. LTP Mn-Bi nanosheets are characterized by an average thickness of tens of nanometers, an average diameter of ∼1.5 μm, and possess a relatively large aspect ratio, an ultra-high room temperature coercivity of 22.3 kOe, a significant geometrical and magnetic anisotropy, and a strong (00l) crystal texture. Magnetization and demagnetization behaviors reveal that wall pinning is the dominant coercivity mechanism in these LTP Mn-Bi nanosheets. The ultrafine grain refinement introduced by the SA-HEBM process contribute to the ultra-high coercivity of LTP Mn-Bi nanosheets and a large number of defects put a powerful pinning effect on the magnetic domain movement, simultaneously. Further magnetic measurement at 437 K shows that a high coercivity of 17.8 kOe and a strong positive temperature coefficient of coercivity existed in the bonded permanent magnet made by LTP Mn-Bi nanosheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural transformation in nano-structured CuAl{sub x}Cr{sub x}Fe{sub 2-2x}O{sub 4} system

Polycrystalline spinel ferrite system CuAl{sub x}Cr{sub x}Fe{sub 2-2x}O{sub 4} (x=0.2, 0.6) was synthesized by solid-state reaction route. Nanoparticles of the samples have been prepared by using high energy ball milling technique with different milling durations and characterized by X-ray Diffraction and Tunneling Electron Microscope. It is observed that the structural transformation occurred from Cubic to tetragonal and particle size varied between 29 nm -14 nm with increase of milling time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of reproducible sub-5 nm nanogaps by a focused ion beam and observation of Fowler-Nordheim tunneling

Creating a stable high resistance sub-5 nm nanogap in between conductive electrodes is one of the major challenges in the device fabrication of nano-objects. Gap-sizes of 20 nm and above can be fabricated reproducibly by the precise focusing of the ion beam and careful milling of the metallic lines. Here, by tuning ion dosages starting from 4.6 × 10{sup 10} ions/cm and above, reproducible nanogaps with sub-5 nm sizes are milled with focused ion beam. The resistance as a function of gap dimension shows an exponential behavior, and Fowler-Nordheim tunneling effect was observed in nanoelectrodes with sub-5 nm nanogaps. The application of Simmon's model to the milled nanogaps and the electrical analysis indicates that the minimum nanogap size approaches to 2.3 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preliminary study of raw material for calcium silicate/PVA coating on Ti-6Al-4V alloy

Calcium silicate bioceramic was prepared from the rice husk and limestone resources using the sol gel method. The preparations of CaSiO{sub 3} formulation were differ from the previous study due CaO/SiO{sub 2} amount with 45:55 ratio. X-Ray Fluorescence analysis was carried out to clarify the amount of SiO{sub 2} and CaO content in the limestone and rice husk ash. The high amount of CaO was found in the limestone with the percentages of 97.22%, whereby 89% of SiO{sub 2} content of the rice husk ash. Several milling time were studied to obtain the optimized milling ti me and speed in progress to obtain nano size particle. The particle size analysis result confirms that increase in milling time does not certainly reduce the size of particle. The addition of 0.05% polyvinyl alcohol as a binder did not change the phases or composition of calcium silicates after examined by X-Ray diffraction analysis which make it suitable to be used as a binder for calcium silicate coating without changing the chemical structure.

36 MATERIALS SCIENCE↗

Structural, thermal, and photoacoustic study of nanocrystalline Cr{sub 3}Ge produced by mechanical alloying

A thermodynamic analysis of the Cr-Ge system suggested that it was possible to produce a nanostructured Cr{sub 3}Ge phase by mechanical alloying. The same analysis showed that, due to low activation energies, Cr-poor crystalline and/or amorphous alloy could also be formed. In fact, when the experiment was performed, Cr{sub 11}Ge{sub 19} and amorphous phases were present for small milling times. For milling times larger than 15 h these additional phases decomposed and only the nanostructured Cr{sub 3}Ge phase remained up to the highest milling time used (32 h). From the differential scanning calorimetry measurements, the Avrami exponent n was obtained, indicating that the nucleation and growth of the nanostructured Cr{sub 3}Ge phase may be restricted to one or two dimensions, where the Cr and Ge atoms diffuse along the surface and grain boundaries. In addition, contributions from three-dimensional diffusion with a constant nucleation rate may be present. The thermal diffusivity of the nanostructured Cr{sub 3}Ge phase was determined by photoacoustic absorption spectroscopy measurements.

36 MATERIALS SCIENCE↗

Physical characteristics and magnetic properties of BaFe{sub 12}O{sub 19}/SrTiO{sub 3} based composites derived from mechanical alloying

A composite system BaFe{sub 12}O{sub 19}/SrTiO{sub 3} with ferrimagnetic BaFe{sub 12}O{sub 19} phase (BHF) and ferroelectric SrTiO{sub 3} phase (STO) have been prepared by mechanical alloying and subsequent heat treatment. The composite powders were studied by Particle Size Analyze, X-ray diffraction and magnetic measurement. It was found that the particle size of composite powders initially increased due to laminated layers formation of a composite and then decreased to an asymptotic value of ∼8 µm as the milling time extended even to a relatively longer time. However, based on results of line broadening analysis the mean grain size of the particles was found in the nanometer scale. We thus believed that mechanical blending and milling of mixture components for the composite materials has promoted heterogeneous nucleation and only after successive sintering at 1100°C the milled powder transformed into particles of nanograin. In this report, microstructure as well as magnetic properties for the composite is also briefly discussed.

36 MATERIALS SCIENCE↗

Conductivity enhancement in mechanosynthesized Bi{sub 2}O{sub 3}

Nanostructured Bi{sub 2}O{sub 3} was prepared through mechanical alloying method. Detailed microstructural information was obtained after Rietveld refinement of the prepared samples. The Transmission Electron Microscope images confirmed the crystallinity of the sample. The average crystallite size decreases whereas microstrain increases due to milling. The ionic conductivity of the milled sample was found to have increased few orders than the unmilled sample. The change in structural and electrical properties due to milling were discussed and correlated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Massless chiral supermultiplets of higher spins and the {theta}-twistor

Recently N. Berkovits, motivated by the supertwistor description of N=4 D=4 super Yang-Mills, considered the generalization of the N=1 D=4 {theta}-twistor construction to D=10 and applied it for a compact covariant description of N=1 D=10 super Yang-Mills. This supports the relevance of the {theta}-twistor as a supersymmetric twistor alternative to the well-known supertwistor. The minimal breaking of superconformal symmetry is an inherent property of the {theta}-twistor received from its fermionic components, described by a Grassmannian vector instead of a Grassmannian scalar in the supertwistor. The {theta}-twistor description of the N=1 D=4 massless chiral supermultiplets (S, S+1/2) with spins S=0,1/2,1,3/2,2,... is considered here. The description permits to restore the auxiliary F fields of the chiral supermultiplets absent in the supertwistor approach. The proposed formalism is naturally generalized to N=4 D=4 and can be used for an off-shell description of the corresponding super Yang-Mills theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Large-N reduction in QCD-like theories with massive adjoint fermions

Large-N QCD with heavy adjoint fermions emulates pure Yang-Mills theory at long distances. We study this theory on a four- and three-torus, and analytically argue the existence of a large-small volume equivalence. For any finite mass, center symmetry unbroken phase exists at sufficiently small volume and this phase can be used to study the large-volume limit through the Eguchi-Kawai equivalence. A finite temperature version of volume independence implies that thermodynamics on R3 x S1 can be studied via a unitary matrix quantum mechanics on S1, by varying the temperature. To confirm this non-perturbatively, we numerically study both zero- and one-dimensional theories by using Monte-Carlo simulation. Order of finite-N corrections turns out to be 1/N. We introduce various twisted versions of the reduced QCD which systematically suppress finite-N corrections. Using a twisted model, we observe the confinement/deconfinement transition on a 1{sup 3} x 2-lattice. The result agrees with large volume simulations of Yang-Mills theory. We also comment that the twisted model can serve as a non-perturbative formulation of the non-commutative Yang-Mills theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higher-derivative gauge interactions of Bagger-Lambert-Gustavsson theory in N=1 superspace

We study the structure of the gauge sector of the Bagger-Lambert-Gustavsson theory in the form proposed by van Raamsdonk, adapted to three dimensions, N=1 superspace. By using the novel Higgs mechanism proposed by Mukhi and Papageorgakis, we derive the manifestly N=1 supersymmetric higher-order terms (beyond the supersymmetric Yang-Mills action) that follow from the Bagger-Lambert-Gustavsson theory in its expansion with respect to the inverse gauge coupling constant squared. We find that all those terms have at least one anticommutator of the super-Yang-Mills field strength superfields as a factor, and thus are reducible to the supersymmetric Yang-Mills terms with the higher (spacetime) derivatives.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of Natural Graphite, Synthetic Graphite, and Thermosetting Resin Candidates for Use in Fuel Compact Matrix

The AGR-1 and AGR-2 compacting process involved overcoating TRISO particles and compacting them in a steel die. The overcoating step is the process of applying matrix to the OPyC layer of TRISO particles in a rotating drum in order to build up an overcoat layer of desired thickness. The matrix used in overcoating is a mixture of natural graphite, synthetic graphite, and thermosetting resin in the ratio, by weight, of 64:16:20. A wet mixing process was used for AGR-1 and AGR-2, in that the graphites and resin were mixed in the presence of ethyl alcohol. The goal of the wet mixing process was to 'resinate' the graphite particles, or coat each individual graphite particle with a thin layer of resin. This matrix production process was similar to the German, Chinese, Japanese, and South African methods, which also use various amount of solvent during mixing. See Appendix 1 for information on these countries matrix production techniques. The resin used for AGR-1 and AGR-2 was provided by Hexion, specifically Hexion grade Durite SC1008. Durite SC1008 is a solvated (liquid) resole phenolic resin. A resole resin does not typically have a hardening agent added. The major constituent of SC1008 is phenol, with minor amounts of formaldehyde. Durite SC1008 is high viscosity, so additional ethyl alcohol was added during matrix production in order to reduce its viscosity and enhance graphite particle resination. The current compacting scale up plan departs from a wet mixing process. The matrix production method specified in the scale up plan is a co-grinding jet mill process where powdered phenolic resin and graphite are all fed into a jet mill at the same time. Because of the change in matrix production style, SC1008 cannot be used in the jet milling process because it is a liquid. The jet milling/mixing process requires that a suite of solid or powdered resins be investigated. The synthetic graphite used in AGR-1 and AGR-2 was provided by SGL Carbon, grade KRB2000. KRB2000 is a graphitized petroleum coke. The availability of KRB2000 is perhaps in question, so a replacement synthetic graphite may need to be identified. This report presents data on potential replacements for KRB2000.

01 COAL, LIGNITE, AND PEAT↗

Precursor Analysis Report: Cyber Attack on Thyssenkrupp Blast Furnace 2014

The Cyber Attack on Thyssenkrupp Blast Furnace 2014 Precursor Analysis Report leverages publicly available information about the Thyssenkrupp Steel Mill cyber attack and catalogs anomalous observables for each technique employed in the attack. This analysis is based upon the methodology of the Cybersecurity for the Operational Technology Environment (CyOTE) program. In December 2014, the German Government’s Federal Office for Information Security (BSI) released a report detailing a cyber attack on a German steel mill that occurred earlier that year, though exact dates and details of the attack were not revealed. While the report did not specify the name of the company, multiple sources identified the victim as one of Europe’s largest steel manufacturers, Thyssenkrupp AG. Further, Thyssenkrupp announced on 16 May of that year that Europe’s largest blast furnace, “Schwelgern 2,” located at its facility in Duisburg, Germany, would be offline for several weeks for repairs and upgrades, suggesting Schwelgern 2 was likely the target of the attack. The attack began in early 2014, when adversaries infiltrated the victim steel mill’s Information Technology (IT) network via a spearphishing campaign, then worked their way into the Operational Technology (OT) environment, where they executed software that caused denial of service, denial of control, and eventually a loss of control. This led to the blast furnace shutting down without proper safety procedures, resulting in catastrophic physical damage. No lives were lost in the incident, but ThyssenKrupp suffered $4 million in damage to the blast furnace and an additional $6 million in lost revenue. The adversaries required specialized knowledge and expertise in steel production, which enabled them to compromise a variety of internal systems and components across both IT and OT networks. The attack also demonstrated detailed knowledge of the industrial control systems (ICS) and production processes being used. This combination resulted in one of the earliest known publicly reported cybersecurity incidents resulting in physical damage to ICS equipment. Researchers and analysts identified 19 unique techniques (used in a sequence of 20 steps) utilized during the attack with a total of 454 observables using MITRE ATT&CK® for Industrial Control Systems. The CyOTE program assesses observables accompanying techniques used prior to the triggering event to identify opportunities to detect malicious activity. If observables accompanying the attack techniques are perceived and investigated prior to the triggering event, earlier comprehension of malicious activity can take place. Fifteen of the identified techniques used during the Thyssenkrupp cyber attack were precursors to the triggering event. Analysis identified 369 observables associated with these precursor techniques, 316 of which were assessed to have an increased likelihood of being perceived in the 120 days preceding the triggering event. The response and comprehension time could have been reduced if the observables had been identified earlier. The information gathered in this report contributes to a library of observables tied to a repository of artifacts, data sources, and technique detection references for practitioners and developers to support the comprehension of indicators of attack. Asset owners and operators can use these products if they experience similar observables or to prepare for comparable scenarios.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Surface-Controlled Conversion of Ammonia Borane from Boron Nitride

“One-pot regeneration”, which is simple regneneration method of ammonia borane (AB) using hydrazine and liquid ammonia, enables conversion of AB from hexagonal boron nitride (h-BN) after milling hydrogenation. Solution 11 B-NMR revealed the presence of AB after NH 3 /N 2 H 4 treatment of milled h-BN (BNH x ) although the yield of AB was less than 5%. The conversion mechanism was clarified as B-H bonds on the h-BN surface created by ball-milling under hydrogen pressure have an ability to form AB, which was confirmed by Thermogravimetry-Residual Gas Analysis (TG-RGA) and Infrared (IR) analysis. The reaction routes are also the same as regeneration route of polyborazylene because intermediates of AB such as (B(NH 2 ) 3 and hydrazine borane were found by solution 11 B-NMR after soaking BNH x in liquid NH 3 and hydrazine, respectively. Because of the fact that all reactions proceed on the h-BN surface and no reaction proceeds when neat h-BN is treated, breaking of B 3 N 3 ring structure and then creation of B-H bond is the key issue to increase conversion yield of AB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural Transitions during Powder Metallurgical Processing of Solute Stabilized Nanostructured Tungsten Alloys

Exploiting grain boundary engineering in the design of alloys for extreme environments provides a promising pathway for enhancing performance relative to coarse-grained counterparts. Due to its attractive properties as a plasma facing material for fusion devices, tungsten presents an opportunity to exploit this approach in addressing the significant materials challenges imposed by the fusion environment. Here, we employ a ternary alloy design approach for stabilizing W against recrystallization and grain growth while simultaneously enhancing its manufacturability through powder metallurgical processing. Mechanical alloying and grain refinement in W-10 at.% Ti-(10,20) at.% Cr alloys are accomplished through high-energy ball milling with transitions in the microstructure mapped as a function of milling time. We demonstrate the multi-modal nature of the resulting nanocrystalline grain structure and its stability up to 1300 °C with the coarser grain size population correlated to transitions in crystallographic texture that result from the preferred slip systems in BCC W. Field-assisted sintering is employed to consolidate the alloy powders into bulk samples, which, due to the deliberately designed compositional features, are shown to retain ultrafine grain structures despite the presence of minor carbides formed during sintering due to carbon impurities in the ball-milled powders.

36 MATERIALS SCIENCE↗