Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metallic glasses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Radiation in controlled environments: influence of lamp type and filter material

Radiation in controlled environments was characterized using fluorescent and various high-intensity-discharge (HID) lamps, including metal halide, low-pressure sodium, and high-pressure sodium as the radiation source. The effects of water, glass, or Plexiglas filters on radiation were determined. Photosynthetic photon flux (PPF, 400 to 700 nm), spectra (400 to 1000 nm), shortwave radiation (285-2800 nm), and total radiation (300 to 100,000 nm) were measured, and photosynthetically active radiation (PAR, 400 to 700 nm) and longwave radiation (2800 to 100,000 nm) were calculated. Measurement of PPF alone was not an adequate characterization of the radiation environment. Total radiant flux varied among lamp types at equal PPF. HID lamps provided a lower percentage of longwave radiation than fluorescent lamps, but, when HID lamps provided PPF levels greater than that possible with fluorescent lamps, the amount of longwave radiation was high. Water was the most effective longwave radiation filter. Glass and Plexiglas similarly filtered longwave more than shortwave radiation, but transmission of nonphotosynthetic shortwave radiation was less with Plexiglas than glass. The filter materials tested would not be expected to influence photomorphogenesis because radiation in the action spectrum of phytochrome was not altered, but this may not be the only pigment involved.

NASA Discipline Life Support Systems↗
DOE OSTI2023

A free-standing lithium phosphorus oxynitride thin film electrolyte promotes uniformly dense lithium metal deposition with no external pressure

Lithium phosphorus oxynitride (LiPON) is an amorphous solid electrolyte that has been extensively studied over the last three decades. Despite the promise of pairing it with various electrode materials, LiPON’s rigidity and air sensitivity set limitations to understanding its intrinsic properties. We report a methodology to synthesize LiPON in a free-standing form that manifests remarkable flexibility and a Young’s modulus of ∼33 GPa. We use solid-state nuclear magnetic resonance and differential scanning calorimetry to quantitatively reveal the chemistry of the Li/LiPON interface and the presence of a well-defined LiPON glass-transition temperature of 207 °C. Combining interfacial stress and a gold seeding layer, our free-standing LiPON shows a uniformly dense deposition of lithium metal without the aid of external pressure. This free-standing LiPON film offers opportunities to study fundamental properties of LiPON for interface engineering for solid-state batteries.

25 ENERGY STORAGE↗
NASA NTRS2012

Lightweight Metal Matrix Composite Segmented for Manufacturing High-Precision Mirrors

High-precision mirrors for space applications are traditionally manufactured from one piece of material, such as lightweight glass sandwich or beryllium. The purpose of this project was to develop and test the feasibility of a manufacturing process capable of producing mirrors out of welded segments of AlBeMet(Registered Trademark) (AM162H). AlBeMet(Registered Trademark) is a HIP'd (hot isostatic pressed) material containing approximately 62% beryllium and 38% aluminum. As a result, AlBeMet shares many of the benefits of both of those materials for use in high performance mirrors, while minimizing many of their weaknesses.

Vudler, Vladimir↗
DOE OSTI2021

Expanding the chemistry of borates with functional [BO 2 ]- anions

More than 3900 crystalline borates, including borate minerals and synthetic inorganic borates, in addition to a wealth of industrially-important boron-containing glasses, have been discovered and characterized. Of these compounds, 99.9 % contain only the traditional triangular BO 3 and tetrahedral BO 4 units, which polymerize into superstructural motifs. Herein, a mixed metal K 5 Ba 2 (B 10 O 17 ) 2 (BO 2 ) with linear BO 2 structural units was obtained, pushing the boundaries of structural diversity and providing a direct strategy toward the maximum thresholds of birefringence for optical materials design. 11 B solid-state nuclear magnetic resonance (NMR) is a ubiquitous tool in the study of glasses and optical materials; here, density functional theory-based NMR crystallography guided the direct characterization of BO 2 structural units. The full anisotropic shift and quadrupolar tensors of linear BO 2 were extracted from K 5 Ba 2 (B 10 O 17 ) 2 (BO 2 ) containing BO 2 , BO 3 , and BO 4 and serve as guides to the identification of this powerful moiety in future and, potentially, previously-characterized borate minerals, ceramics, and glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Real-space atomic dynamics in liquid gallium studied by inelastic neutron scattering

Gallium is a prototypical liquid metal and has gained renewed attention because of its unique properties. Characterizing and elucidating its atomic dynamics remains elusive despite numerous studies, primarily because of the challenges in quantifying atomic-scale dynamics in liquids. Recent developments in inelastic neutron scattering enable us to measure the Van Hove correlation function that describes the real-space motion of liquid atoms. Here, in this work, we use this approach to reveal the dynamics in gallium liquids and find the co-existence of two dynamical medium-range orders (MROs), which have a dynamical behavior distinct from that of the short-range order (SRO). We propose that these MROs are driven by global forces in the form of two density waves, as a direct consequence of the underlying competition between ionic core repulsion and valence electron cohesion. We suggest that the density wave approach is not only applicable to other metallic liquids exhibiting similar structural anomalies, but also offers a promising direction for elucidating the dynamics of complex liquids and glasses by linking electronic-state fluctuations to atomic dynamics.

Hua, Chengyun [Oak Ridge National Laboratory (ORNL↗
NASA NTRS1972

X-ray scattering study

A soft X-ray glancing incidence telescope mirror and a group of twelve optical flat samples were used to study the scattering of X-rays. The mirror was made of Kanigen coated beryllium and the images produced were severely limited by scattering of X-rays. The best resolution attained was about fifteen arc seconds. The telescope efficiency was found to be 0.0006. The X-ray beam reflected from the twelve optical flat samples was analyzed by means of a long vacuum system of special design for these tests. The scattering then decreased with increasing angle of incidence until a critical angle was passed. At larger angles the scattering increased again. The samples all scattered more at 44 A than at 8 A. Metal samples were found to have about the same scattering at 44 A but greater scattering at 8 A than glass samples.

Wriston, R. S.↗
NASA NTRS1979

Process Development for Automated Solar Cell and Module Production. Task 4: Automated Array Assembly

A baseline sequence for the manufacture of solar cell modules was specified. Starting with silicon wafers, the process goes through damage etching, texture etching, junction formation, plasma edge etch, aluminum back surface field formation, and screen printed metallization to produce finished solar cells. The cells were then series connected on a ribbon and bonded into a finished glass tedlar module. A number of steps required additional developmental effort to verify technical and economic feasibility. These steps include texture etching, plasma edge etch, aluminum back surface field formation, array layup and interconnect, and module edge sealing and framing.

Source record↗
NASA NTRS1982

Ultrapure glass optical waveguide development in microgravity by the sol-gel process

Containerless melting of glasses in space for the preparation of ultrapure homogeneous glass for optical waveguides is discussed. The homogenization of the glass using conventional raw materials is normally achieved on Earth either by the gravity induced convection currents or by the mechanical stirring of the melt. Because of the absence of gravity induced convection currents, the homogenization of glass using convectional raw materials is difficult in the space environment. Multicomponent, homogeneous, noncrystalline oxide gels can be prepared by the sol-gel process and these gels are promising starting materials for melting glasses in the space environment. The sol-gel process is based on the polymerization reaction of alkoxysilane with other metal alkoxy compounds or suitable metal salts. Many of the alkoxysilanes or other metal alkoxides are liquids and thus can be purified by distillation.

Source record↗
NASA NTRS1986

Roedderite in the Qingzhen (EH3) chondrite

The rare mineral roedderite, (Na1.09 K0.89 Ca0.02)2.00 (Mg4.71 Fe0.27)4.98 (Si11.80 Al0.09)11.89 O30 has been found in accessory amounts in the highly unequilibrated enstatite chondrite, Qingzhen. It occurs in association with minor amounts of albite and SiO2 as inclusions within the metal or sulfide phases of metal-sulfide assemblages. The roedderite crystals are connected through oxide and silicate veins to the surrounding matrix. The presence of glass coated vesicles on the surface of the assemblages strongly suggests that roedderite originated in the presence of a fluid phase, presumably during post-accretional planetary processes.

Rambaldi, E. R.↗
NASA NTRS2000

The Life Cycle Application of Intelligent Software Modeling for the First Materials Science Research Rack

Marshall Space Flight Center (MSFC) has been funding development of intelligent software models to benefit payload ground operations for nearly a decade. Experience gained from simulator development and real-time monitoring and control is being applied to engineering design, testing, and operation of the First Material Science Research Rack (MSRR-1). MSRR-1 is the first rack in a suite of three racks comprising the Materials Science Research Facility (MSRF) which will operate on the International Space Station (ISS). The MSRF will accommodate advanced microgravity investigations in areas such as the fields of solidification of metals and alloys, thermo-physical properties of polymers, crystal growth studies of semiconductor materials, and research in ceramics and glasses. The MSRR-1 is a joint venture between NASA and the European Space Agency (ESA) to study the behavior of different materials during high temperature processing in a low gravity environment. The planned MSRR-1 mission duration is five (5) years on-orbit and the total design life is ten (IO) years. The MSRR-1 launch is scheduled on the third Utilization Flight (UF-3) to ISS, currently in February of 2003). The objective of MSRR-1 is to provide an early capability on the ISS to conduct material science, materials technology, and space product research investigations in microgravity. It will provide a modular, multi-user facility for microgravity research in materials crystal growth and solidification. An intelligent software model of MSRR-1 is under development and will serve multiple purposes to support the engineering analysis, testing, training, and operational phases of the MSRR-1 life cycle development. The G2 real-time expert system software environment developed by Gensym Corporation was selected as the intelligent system shell for this development work based on past experience gained and the effectiveness of the programming environment. Our approach of multi- uses of the simulation model and its intuitive graphics capabilities is providing a concurrent engineering environment for rapid prototyping and development. Operational schematics of the MSRR-1 electrical, thermal control, vacuum access, and gas supply systems, and furnace inserts are represented graphically in the environment. Logic to represent first order engineering calculations is coded into the knowledge base to simulate the operational behavior of the MSRR-1 systems. An example of engineering data provided includes electrical currents, voltages, operational power, temperatures, thermal fluid flow rates. pressures, and component status indications. These type of data are calculated and displayed at appropriate instrumentation points, and the schematics are animated to reflect the simulated operational status of the MSRR-1. The software control functions are also simulated to represent appropriate operational behavior based on automated control and response to commands received by the crew or ground controllers. The first benefit of this simulation environment is being realized in the high fidelity engineering analysis results from the electrical power system G2 model. Secondly, the MSRR-1 simulation model will be embedded with a hardware mock-up of the MSRR-1 to provide crew training on MSRR-1 integrated payload operations. G2 gateway code will output the simulated instrumentation values, termed as telemetry, in a flight-like data stream so that the crew has realistic and accurate simulated MSRR-1 data on the flight displays which will be designed for crew use. The simulation will also respond appropriately to crew or ground initiated commands, which will be part of normal facility operations. A third use of the G2 model is being planned; the MSRR-1 simulation will be integrated with additional software code as part of the test configuration of the primary onboard computer, or Master Controller, for MSRR-1. We will take advantage of the G2 capability to simulate the flight like data stream to test flight software responses and behavior. A fourth use of the G2 model will be to train the Ground Support Personnel that will monitor the MSRR-1 systems and payloads while they are operating aboard the ISS. The intuitive, schematic based environment will provide an excellent foundation for personnel to understand the integrated configuration and operation of the MSRR-1, and the anticipated telemetry feedback based on operational modes of the equipment. Expert monitoring features will be enhanced to provide a smart monitoring environment for the operators. These features include: (1) Animated, intuitive schematic-based displays which reflect telemetry values, (1) Real-time plotting of simulated or incoming sensor values, (3) High/Low exception monitoring for analog data, (4) Expected state monitoring for discrete data, (5) Data trending, (6) Automated malfunction procedure execution to diagnose problems, (7) Look ahead capability to planned MSRR-1 activities in the onboard timeline. And finally, the logic to calculate telemetry values will be deactivated, and the same environment will interface to the incoming data for the real-time telemetry stream to schematically represent the onboard hardware configuration. G2 will be the foundation for the real-time monitoring and control environment. In summary, our MSRR-1 simulation model spans many elements of the life cycle development of this project: Engineering Analysis, Test and Checkout, Training of Crew and Ground Personnel, and Real-time monitoring and control. By utilizing the unique features afforded by an expert system development environment, we have been able to synergize a powerful tool capable of addressing our project needs at every phase of project development.

Rice, Amanda↗
DOE OSTI2024

Long coir and glass fiber reinforced polypropylene hybrid composites prepared via wet-laid technique

Natural fiber composites offer an advantage in terms of weight saving for many automotive applications; however, many natural fiber composites lack properties to justify substitution for synthetic composites. Hybridizing the natural fiber composites by adding a fraction of synthetic fibers is an innovative approach to provide a balance between composite's performance and weight savings. In this study, coir fiber (40 wt%)-reinforced polypropylene (PP) composites were hybridized by substituting a fraction of coir fiber with glass fiber (0–30 wt%). The composites were prepared using a novel wet-laid technique followed by compression molding, where the fiber length is preserved. The composites prepared by hybridizing PP/coir fibers with glass fibers were light in weight (6–20% lighter compared to 40 wt% glass fiber reinforced PP) with significantly enhanced tensile (strength – 49–182%, modulus – 54–130%), flexural (strength – 41–104%, modulus – 64–193%), and impact properties (157 - 474%) compared to 40 wt% coir fiber reinforced PP composites. Furthermore, the addition of glass fiber (10–30 wt%) to coir fiber reduced the water-absorbing tendency (by 18–74%) of PP/coir fiber composites. All in all, this work has potential applications in automotive, mass transit, and truck applications where natural fiber composites are being investigated as alternatives to metal and/or fully synthetic composites.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Low thermal flux glass-fiber tubing for cryogenic service

This paper describes analytical techniques, fabrication development, and test results for composite tubing that has many applications in aerospace and commercial cryogenic installations. Metal liner fabrication is discussed in detail with attention given to resistance-welded liners, fusion-welded liners, chem-milled tubing liners, joining tube liners and end fittings, heat treatment and leak checks. Composite overwrapping, a second method of tubing fabrication, is also discussed. Test programs and analytical correlation are considered along with composite tubing advantages such as minimum weight, thermal efficiency and safety and reliability.

Hall, C. A.↗
NASA NTRS1991

Experimental reduction of simulated lunar glass by carbon and hydrogen and implications for lunar base oxygen production

The most abundant element in lunar rocks and soils is oxygen which makes up approximately 45 percent by weight of the typical lunar samples returned during the Apollo missions. This oxygen is not present as a gas but is tightly bound to other elements in mineral or glass. When people return to the Moon to explore and live, the extraction of this oxygen at a lunar outpost may be a major goal during the early years of operation. Among the most studied processes for oxygen extraction is the reduction of ilmenite by hydrogen gas to form metallic iron, titanium oxide, and oxygen. A related process is proposed which overcomes some of the disadvantages of ilmenite reduction. It is proposed that oxygen can be extracted by direct reduction of native lunar pyroclactic glass using either carbon, carbon monoxide, or hydrogen. In order to evaluate the feasibility of this proposed process a series of experiments on synthetic lunar glass are presented. The results and a discussion of the experiments are presented.

Mckay, David S.↗
DOE OSTI2025

To Substitute Rather Than Intercalate: Chimie douce Approach to Induce Ferromagnetism in Metastable Pt 0.8 M 0.2 Se 2 ( M = Cr, Co, Ni)

Two-dimensional (2D) magnetic materials with exotic magnetic properties have garnered significant interest due to their potential applications in spintronics and data storage technologies. However, the limited availability of intrinsic 2D magnetic materials has driven efforts to induce and manipulate magnetism in otherwise nonmagnetic 2D systems through approaches such as chemical intercalation, defect engineering, and substitutional doping. Herein, we present a facile, chimie douce method for incorporating 3d transition metals (Cr, Co, and Ni) into the nonmagnetic PtSe 2 sublattice. This synthetic approach enables control over layer thickness of Pt 1–x M x Se 2 (M = Cr, Co, Ni) nanosheets by varying the M identity and annealing conditions. Comprehensive scattering and spectroscopic characterizations confirm the successful and homogeneous substitution of M atoms at the Pt site, rather than intercalation, and reveal a strong correlation between nanosheet thickness and the identity of the substituting metal. High-temperature annealing of the nanosheets promotes an irreversible transformation toward the bulk phase, allowing for detailed characterization of structural and magnetic properties. A case study of Pt 0.8 Cr 0.2 Se 2 reveals that nanosheet thickness plays a critical role in modulating local magnetic interactions. While Cr atoms in the as-synthesized few-layers-thick nanosheets exhibit predominantly short-range antiferromagnetic interactions, the emergence of short-range ferromagnetic exchange is revealed in the bulk material. Detailed ac susceptibility and remanent magnetization measurements further demonstrate that bulk Pt 0.8 Cr 0.2 Se 2 adopts a frustrated magnetic ground state with clear signatures of ferromagnetic cluster-glass behavior. The systematic investigation presented herein establishes a clear and robust protocol for the synthesis and in-depth characterization of 2D transition-metal-substituted PtSe2 materials with varying layer thickness and paves a path toward their realization in spintronic and magnetic device applications.

crystallinity↗
DOE OSTI2025

Wildfire Produces Transient Minerals: Speciation, Reactivity, and Fate of Iron and Manganese in Surface Soils Post Wildfire

Wildfire leads to the deposition of an ash layer at the land surface. This material typically has alkaline properties, abundant pyrogenic carbon, and elevated metal concentrations compared to surface soils. Here, we compare ash and surface soils collected three weeks and two years after the Glass Fire (St. Helena, California, USA) to determine how wildfire affects the speciation and reactivity of iron (Fe) and manganese (Mn), two micronutrients that influence many soil processes. Synchrotron-based analyses revealed that wildfire generated stable Fe oxides like maghemite (γ-Fe 2 O 3 ) and hematite (α-Fe 2 O 3 ) that likely derived from surface soil or mineral dust rather than the vegetation, and Mn oxides such as hausmannite (Mn 3 O 4 ) and bixbyite (Mn 2 O 3 ) that derived primarily from aboveground biomass. However, these pyrogenic minerals were absent in soils collected two years after the fire. Their loss from the soil surface may result from a combination of erosion, translocation to deeper soil layers, and chemical weathering. The latter hypothesis is supported by the enhanced mobilization of Fe and Mn from ash upon the addition of pyoverdine, a model biogenic ligand. The increased mobility of micronutrients from fire-derived minerals in ash in response to microbial and root exudation may facilitate postfire soil and vegetation recovery.

bixbyite↗
DOE OSTI2022

Multi-process tooling for discontinuous carbon and hybrid glass fiber thermoplastics

Expensive tooling often constraints the use of composites in the design and development of automotive parts. While there is significant confidence and knowledge in sheet and bulk metals, composite processes are less understood in mass production environment. The processes used to produce composites and resulting properties are influenced by fiber length attrition, resin to fiber ratio, process waste etc. Tool designs are determined very early in the engineering process. It is cost prohibitive to build additional tools, in the event it becomes obvious a better processing method and material would be beneficial, the original decision is not easily changed. In the present work we recognize the bottleneck of tooling costs and provide an approach of multi-process tooling. The innovation of this work is the design and demonstration of a single tool for different processes namely injection, injection-compression and extrusion-compression. The materials used in this study were long and short fiber thermoplastics (LFTs and SFTs). The resulting structure-property relationships have been reported for the materials and processing methods with a battery tray (BT) tool.

Vaidya, Uday↗
NASA NTRS1981

A Module Experimental Process System Development Unit (MEPSDU)

Design work for a photovoltaic module, fabricated using single crystal silicon dendritic web sheet material, resulted in the identification of surface treatment to the module glass superstrate which improved module efficiencies. A final solar module environmental test, a simulated hailstone impact test, was conducted on full size module superstrates to verify that the module's tempered glass superstrate can withstand specified hailstone impacts near the corners and edges of the module. Process sequence design work on the metallization process selective, liquid dopant investigation, dry processing, and antireflective/photoresist application technique tasks, and optimum thickness for Ti/Pd are discussed. A noncontact cleaning method for raw web cleaning was identified and antireflective and photoresist coatings for the dendritic webs were selected. The design of a cell string conveyor, an interconnect feed system, rolling ultrasonic spot bonding heat, and the identification of the optimal commercially available programmable control system are also discussed. An economic analysis to assess cost goals of the process sequence is also given.

Source record↗