SEARCH · Engineering Papers

Results for “materials synthesis and processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Inductively Coupled Nonthermal Plasma Synthesis of Size-Controlled γ-Al 2 O 3 Nanocrystals

Gamma alumina (γ-Al 2 O 3 ) is widely used as a catalyst and catalytic support due to its high specific surface area and porosity. However, synthesis of γ-Al 2 O 3 nanocrystals is often a complicated process requiring high temperatures or additional post-synthetic steps. Here, we report a single-step synthesis of size-controlled and monodisperse, facetted γ-Al 2 O 3 nanocrystals in an inductively coupled nonthermal plasma reactor using trimethylaluminum and oxygen as precursors. Under optimized conditions, we observed phase-pure, cuboctahedral γ-Al 2 O 3 nanocrystals with defined surface facets. Nuclear magnetic resonance studies revealed that nanocrystal surfaces are populated with AlO 6 , AlO 5 and AlO 4 units with clusters of hydroxyl groups. Nanocrystal size tuning was achieved by varying the total reactor pressure yielding particles as small as 3.5 nm, below the predicted thermodynamic stability limit for γ-Al 2 O 3 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

A High-Ceramic-Loading LATP–PVDF–Al 2 O 3 Composite Film for Lithium-Ion Batteries With Favorable Porous Microstructure and Enhanced Thermal Stability

A separator plays a crucial role in a Li-ion battery to carry liquid electrolytes while preventing short-circuiting between electrodes. Nevertheless, conventional commercial separators often exhibit poor wettability and are prone to shrink at elevated temperatures due to their limited thermal stability. Herein, we report a heat-resistant LATP–PVDF–Al 2 O 3 composite film with outstanding wetting performance. The thin film was prepared using ball mill mixing and tape-casting processes. Two solvents, NMP and glycerol, were applied to prepare the slurry, and a favorable microstructure in the film was created after drying. Here, the ionic conductivity of the film was tested at 1.39 mS cm –1 when paired with liquid electrolyte, almost double that of the commercial counterpart. The high ceramic loading of 70% improved both the thermal shrinkage resistance and dendrite inhibition of the membrane. When assembled in an NMC half-cell, the cycling capacity retentions of 92.8% and 92.1% are achieved after 50 cycles at 0.5 C and 1 C, demonstrating its capability to be used in Li-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2021

Mechanical Behavior of Hybrids with Hyper-Connected Molecular Networks

Our research is focused on fundamental studies related to the molecular design, synthesis, characterization and modeling of molecular-reinforced hybrid glass films for superior mechanical and fracture properties. Molecular-reinforced hybrid glass films exhibit unique electro-optical properties while maintaining excellent thermal stability. They have important technological application for emerging nanoscience and energy technologies including anti-reflective and ultra-barrier layers in photovoltaics, display technologies, as well as quantum technologies. However, they are often inherently brittle in nature, do not adhere well to adjacent substrates, and exhibit poor mechanical properties. Furthermore, a robust understanding of the underlying mechanisms of deformation, fracture and fatigue has been lacking particularly given their mechanically fragile nature. The related lack of structure-property relationships between molecular structure, mechanical properties and processing represents a fundamental challenge to their integration into device technologies, compromises their thermomechanical reliability and has thwarted efforts to improve mechanical and, particularly, fracture properties.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Fluorine-Free Precise Polymer Electrolyte for Efficient Proton Transport: Experiments and Simulations

Designing polymers with controlled nanoscale morphologies and scalable synthesis is of great interest in the development of fluorine-free materials for proton-exchange membranes in fuel cells. This study focuses on a precision polyethylene with phenylsulfonic acid branches at every fifth carbon, p5PhSA, with a high ion-exchange capacity (4.2 mmol/g). The polymers self-assemble into hydrophilic and hydrophobic co-continuous nanoscale domains. In the hydrated state, the hydrophilic domain, composed of polar sulfonic acid moieties and water, serves as a pathway for efficient mesoscopic proton conductivity. The morphology and proton transport of p5PhSA are evaluated under hydrated conditions using in situ X-ray scattering and electrochemical impedance spectroscopy techniques. Additionally, at 40 °C and 95% relative humidity, the proton conductivity of p5PhSA is 0.28 S/cm, which is four times greater than Nafion 117 under the same conditions. Atomistic molecular dynamics (MD) simulations are also used to elucidate the interplay between the structure and the water dynamics. The MD simulations show strong nanophase separation between the percolated hydrophilic and hydrophobic domains over a wide range of water contents. The percolated hydrophilic nanoscale domain facilitates the rapid proton transport in p5PhSA and demonstrates the potential of precise hydrocarbon-based polymers as processible and effective proton-exchange membranes.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Prediction and Control of Atomic Ordering in Electrodeposited Binary Alloy Films: Direct Synthesis of L10 Magnetic Phases

Permanent magnet materials are essential components in renewable energy technology, underlying, electric vehicles, hybrids, wind turbines and more. Today commercial permanent magnets based on Nd-Fe-B exhibit an energy product of ~ 400 kJ/m 3 , capable to run wind turbines efficiently. Unfortunately, the supplies of rare-earth elements are centralized, and their availability may see volatility over time. This state of affairs stimulates the search for the search for rare-earth-free permanent magnetic materials. The L1 0 crystal structure underlines an important class of chemical ordered alloys that exhibit uniaxial magnetocrystalline anisotropy. This material has been considered an excellent candidate for rare-earth-free permanent magnets. In this program, a series of systematic experiments were performed and analysed in order to understand the effect of each. In order to synthesize L 10-Fe-Ni, one has to circumvent the sluggish kinetic and the limited driving force resulted from the low order-disorder temperature (~320°C) of the system. A strategy was found to trigger a martensitic transformation from the FCC phase to one of the non-cubic phases by high-strain methods. The body-centered tetragonal Fe-Ni obtained by this strategy was considered as a precursor of L10 Fe-Ni. The formation of BCT Fe-Ni via a displacive process was also implemented at the nanoscale by using tailored AuNi@FeNi core@shell.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Challenges in correlating oxygen stable isotope ratios of hydrates on uranium ore concentrates to process waters

Exchange of oxygen stable isotopes (δ 18 O values) between precipitation waters and uranium oxides is governed by thermodynamics or kinetics. It has been assumed that meteoric waters can be related to precipitation waters in uranium ore concentrates and their calcination and reduced uranium oxide products. With this assumption, the δ 18 O values of uranium materials could provide forensic signatures that identify the production history and geolocation of nuclear materials. To further exploit the potential of δ 18 O values in nuclear material analysis, this study examines the oxygen stable isotope exchange in two UOCs, magnesium diuranate (MDU) and sodium diuranate (SDU). MDU and SDU were synthesized from solutions of uranyl nitrate hexahydrate using precipitation waters with unique oxygen isotope compositions. The structures of the MDU and SDU were analyzed using powder X-ray diffraction (p-XRD) and thermal mass loss curves, while the δ 18 O values of waters generated during thermal decomposition were analyzed using a thermogravimetric analyzer coupled to an isotope ratio infrared spectrometer (TGA-IRIS). By p-XRD, the MDU was uniform and amorphous across all syntheses with residual crystalline material incorporated as a minor component. Combined with the TGA results, all of the MDU is likely amorphous MgU 2 O 7 ·3H 2 O with MgO impurities present throughout. In contrast, the SDU synthesis resulted in multiple phases with many samples exhibiting crystalline phases including a combination of Na(UO 2 ) 4 O 2 (OH) 5 ·5H 2 O and Na 2 (UO2) 6 O 4 (OH) 6 ·8H 2 O with a Na 2 U 2 O 7 minor phase. A small fraction of the SDU samples were amorphous with no crystalline XRD peaks observed. Mass loss curves of the SDU samples revealed that the amorphous samples contained inclusions of similar crystalline phases compared to the crystalline materials. The uniformity of the MDU samples enabled highly reproducible measurements of δ 18 O values of the water vapor yielded for two dehydration events at 170 °C and 500 °C. In contrast, the multiphase composition of the SDU samples resulted in poor reproducibility in δ 18 O values. In conclusion, neither system revealed any correlation between the δ 18 O values of precipitation water, and the waters released during dehydration of the UOCs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2024

An Integrated Deposition and Passivation Strategy for Controlled Crystallization of 2D/3D Halide Perovskite Films

Abstract This work introduces a simplified deposition procedure for multidimensional (2D/3D) perovskite thin films, integrating a phenethylammonium chloride (PEACl)‐treatment into the antisolvent step when forming the 3D perovskite. This simultaneous deposition and passivation strategy reduces the number of synthesis steps while simultaneously stabilizing the halide perovskite film and improving the photovoltaic performance of resulting solar cell devices to 20.8%. Using a combination of multimodal in situ and additional ex situ characterizations, it is demonstrated that the introduction of PEACl during the perovskite film formation slows down the crystal growth process, which leads to a larger average grain size and narrower grain size distribution, thus reducing carrier recombination at grain boundaries and improving the device's performance and stability. The data suggests that during annealing of the wet film, the PEACl diffuses to the surface of the film, forming hydrophobic (quasi‐)2D structures that protect the bulk of the perovskite film from humidity‐induced degradation.

2D/3D perovskites↗

DOE OSTI2025

Discovery, Design, Synthesis and Testing of High Performance Structural Alloys (Final Technical Report)

The overarching goal of this project is to understand the phase stability and mechanical behavior of non-stoichiometric multi-principal element alloy (MPEA) materials. In order to identify suitable alloys, we plan to use a combinatorial thin film screening approach, in collaboration with scientists at Lawrence Berkeley National Laboratory who are performing computational work as well as complementary experimental work. Specific tasks within the scope of this project include the fabrication, using thin film deposition from six sputtering targets, of combinatorial samples with multi-dimensional gradients in composition and microstructure. These samples are studied to screen MPEA systems for promising candidate alloys with specific composition(s), based on characterization of composition, structure and mechanical behavior across the thin film. We want to produce single-phase MPEAs with chemical homogeneity in a given thin film region, simple grain structures, and no intermetallic phases present. Gradient films facilitate first-pass screening for desirable characteristics and inform the next stage of work that involves fabrication of bulk MPEA specimens for (tensile) mechanical testing and characterization. To make the bulk alloys, metal (elemental) pieces are melted to form MPEAs, followed by heat treatment to homogenize the composition and microstructure. A subset of alloys is also cast, using vacuum arc melting, to yield larger samples (diameter ~1 cm and length ~5-10 cm) and these allow us to assess viability of scale-up for the alloys in structural applications. Further processing plans include rolling and heat treatment to recrystallize selected bulk MPEAs and grow grains to different extents, in order to investigate size effects in the mechanical behavior of MPEAs. Microspecimen testing will be performed (primarily in tension) to assess the mechanical behavior over a range of temperatures. The deformation microstructure of mechanically tested alloys will be characterized using transmission electron microscopy (TEM) to provide a scientific basis for understanding the structure-property relationships in MPEA mechanical behavior.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Construction of an Anion-Pillared MOF Database and the Screening of MOFs Suitable for Xe/Kr Separation

The separation of xenon/krypton (Xe/Kr) mixtures is a challenging process. Many porous materials allow the adsorption of both Xe and Kr but only with low selectivity. Anion-pillared metal–organic frameworks (MOFs), featuring the anion groups as structural pillars, show potential in gas separations, but only a limited number of them have been synthesized. Here, we describe a collection of 936 anion-pillared MOFs based on 22 experimentally available structures. We performed density functional theory (DFT) optimization and then assigned density-derived electrostatic and chemical (DDEC) charges for each MOF to make them well suited to molecular simulations. The structural properties of the MOFs vary more strongly with the choice of the organic ligand than with other aspects like fluorine groups and metal centers. We then screened the entire collection of MOFs in the context of Xe/Kr separation at room temperature. Compared with previously reported MOFs, the interpenetrated MOF SIFSIX-6-Cd-i is predicted to perform better for Xe/Kr separations, with a good balance between working capacity (1.62 mmol/g) and separation selectivity (16.4) at 298 K and 100 kPa. Here, we also found that the heterogeneity of fluorine groups within a MOF can help to enhance Xe working capacity without reducing the Xe/Kr selectivity, suggesting that synthesis of anion-pillared MOFs with mixed fluorine groups may lead to improved Xe/Kr separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Photoinduced Electron and Energy Transfer Pathways and Photocatalytic Mechanisms in Hybrid Plasmonic Photocatalysis

Hybrid plasmonic nanostructures are built on plasmonic metalnanostructures surrounded by catalytic metals or metal oxides. We report that recent studies have shown that hybrid plasmonic nanocatalysts can concurrently utilize thermal energy and photon stimuli and exhibit high catalytic activity, selectivity, and stability that are not attainable in conventional purely thermally activated catalytic processes. The hybrid plasmonic photocatalytic approach has recently emerged as an attractive concept for the conversion of solar energy into chemical energy, the distributed synthesis of valuable chemicals such as ammonia with little to no requirement of external heating, and the development of coke-resistant and selective catalytic processes. The field of hybrid plasmonic photocatalysis has grown tremendously in the last decade. In this review article, the advantages of visible-light-augmented hybrid plasmonic photocatalysis over conventional pure thermally activated heterogeneous catalysis are discussed. Fundamental insights are provided into photocatalytic mechanisms by which the photoexcited charge carriers (electrons and holes) are formed and transferred to adsorbates triggering chemical transformations on the surface of hybrid plasmonic nanocatalysts. Computational modeling used for predicting and understanding the photocatalytic activity and selectivity on hybrid plasmonic nanostructures is also reviewed. The review closes with a discussion of the current challenges, new opportunities, and future outlook for hybrid plasmonic photocatalysis.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Multifunctional Catalysts for the Tandem Reactions of Oxygenates

Industrially-relevant catalytic reactions rarely consist of a simple sequence of elementary steps. Moreover, kinetic coupling of multiple reactions on a catalyst surface is highly desired for process intensification and improved energy efficiency for large scale chemical transformations. The shifting landscape of hydrocarbon chemical feedstocks in the US also motivates research on the selective conversion of more complex molecules. One desirable type of catalytic reaction is the reduction of carboxylic acids that are produced from biomass feedstocks to their corresponding alcohols. The proposed research explores the fundamental importance of hydrogen spillover on a multifunctional catalyst for carboxylic acid reduction with H 2 composed of metal particles coupled to metal oxide particles. Recent work has demonstrated the excellent performance of supported tungsten oxide clusters for carboxylic acid reduction, but only after they are promoted with a late transition metal such as palladium. Elucidating the active state of the catalyst and the associated reaction mechanism for acid reduction on that active state are the overall goals of the proposed project and successful completion will enable future design of efficient multifunctional catalysts. The critically important role of the metal promoter is hypothesized to be its ability to dissociate H2 and spillover atomic H to the support. Although hydrogen spillover is a well-recognized phenomenon in catalysis, its role in both catalyst activation and catalytic turnover are still unresolved. The study combined materials synthesis, characterization, reactivity testing, and molecular simulations, to explore the effect of hydrogen chemical potential on the formation of the active catalytic sites and on the steady state catalytic reduction of carboxylic acid. Varying the hydrogen chemical potential through modification of the gas conditions, support composition, and metal loading to modulated the structure and catalytic performance of the reducible metal oxide. Dual function catalysts containing supported Pd and WO x species co-located on a non-reducible carrier (silica) and a reducible carrier (titania) were synthesized and characterized by electron microscopy, temperature-programmed reduction, and chemisorption. Spectroscopic methods such as X-ray absorption and UV-vis were also used to evaluate the catalysts, which were used in the reduction of propionic acid to aldehyde and alcohol. Quantum chemical calculations, including ab initio phase diagrams provided molecular insights into the H spillover phenomenon.

09 BIOMASS FUELS↗

DOE OSTI2024

Facile Synthesis of a Broad Range of Colloidal Nanocrystals by Membrane-Mediated pH Gradient under Ambient Conditions

We report a simple synthesis process for a wide variety of ultrasmall nanocrystals. Simply immersing a dialysis bag containing an aqueous solution of a metal salt mixed with citric acid in a NaOH solution reservoir for 10 min, nanocrystals measuring only a few nanometers in size are formed inside the dialysis bag. We demonstrated the synthesis of ultrasmall nanocrystals of Co, Ni, Cu, Ag, Au, Pd, Cu 2 O, FeO, and CeO 2 , and found that the gradual change in pH caused by the diffusion of OH – ions through the dialysis membrane played an essential role in the formation of these nanocrystals. This method can be readily adapted for almost all transition metal elements, providing researchers in the fields of catalysis and nanomedicine an easy access to a wide range of ultrasmall metal and oxide nanocrystals.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders

Abstract Laser powder bed fusion (LPBF) additive manufacturing (AM) is a promising route for the fabrication of oxide dispersion strengthened (ODS) steels. In this study, 14YWT ferritic steel powders were produced by gas atomization reaction synthesis (GARS). The rapid solidification resulted in the formation of stable, Y-containing intermetallic Y 2 Fe 17 on the interior of the powder and a stable Cr-rich oxide surface. The GARS powders were consolidated with LPBF. Process parameter maps identified a stable process window resulting in a relative density of 99.8%. Transmission electron microscopy and high-energy x-ray diffraction demonstrated that during LPBF, the stable phases in the powder dissociated in the liquid melt pool and reacted to form a high density (1.7 × 10 20 /m 3 ) of homogeneously distributed Ti 2 Y 2 O 7 pyrochlore dispersoids ranging from 17 to 57 nm. The use of GARS powder bypasses the mechanical alloying step typically required to produce ODS feedstock. Preliminary mechanical tests demonstrated an ultimate tensile and yield strength of 474 MPa and 312 MPa, respectively.

36 MATERIALS SCIENCE↗

DOE OSTI2023

SPERLU Selective Process for Efficient Removal of Lignin and Upgrading (Final Technical Report)

To meet the growing demand for bio-based chemicals and improve the profitability and efficiency of the emerging biorefinery industry, lignin is an abundant and attractive feedstock. Spero Renewables has developed a proprietary and patent-pending technology, the Selective Process for Efficient Removal of Lignin and Upgrading (SPERLU). The technology is a catalytic deconstruction and upgrading of lignin in lignocellulosic biomass or commercially available technical lignin to produce multi-functional phenol (MFP) products. The SPERLU process has been demonstrated and vetted on a lab scale to convert commercially available technical lignin to MFPs in yields of 60-90% (based on lignin). The MFP products can be separated and further upgraded through catalytic or biological means. Spero performed a detailed kinetic study of the SPERLU process and used the resulting kinetic data to design and construct a mini-pilot-scale reactor for routine production of hundreds of grams of MFP products. Spero’s lignin-based MFPs have been demonstrated for use as a drop-in replacement for bisphenol A (BPA) in the synthesis of thermoset polymers. Spero’s lignin-based thermoset polymers exhibit excellent mechanical properties and can be used in many applications. Additionally, a collaboration with the National Renewable Energy Lab (NREL) was used to evaluate the feasibility of upgrading SPERLU products through biological means into valuable chemicals. A comprehensive technoeconomic analysis (TEA) and Life-cycle analysis (LCA) have been completed and support the case for commercialization of the SPERLU technology. Through this project Spero has significantly de-risked the SPERLU technology and is actively planning larger scale pilot projects.

09 BIOMASS FUELS↗

DOE OSTI2024

Covalent integration of polymers and porous organic frameworks

Covalent integration of polymers and porous organic frameworks (POFs), including metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), represent a promising strategy for overcoming the existing limitations of traditional porous materials. This integration allows for the combination of the advantages of polymers, i.e., flexibility, processability and chemical versatility etc., and the superiority of POFs, like the structural integrity, tunable porosity and the high surface area, creating a type of hybrid materials. These resulting polymer-POF hybrid materials exhibit enhanced mechanical strength, chemical stability and functional diversity, thus opening up new opportunities for applications across a large variety of fields, such as gas separation, catalysis, biomedical applications, environmental remediation and energy storage. In this review, an overview of synthetic routes and strategies on how to covalently integrate different polymers with various POFs is discussed, especially with a particular focus on methods like polymerization within, on and among POF structures. To investigate the unique properties and functions of these resultant hybrid materials, the characterization techniques, including nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), transmission electron microscopy (TEM) and scanning electron microscopy (SEM), gas adsorption analysis (BET) and computational modeling and machine learning, are also presented. The ability of polymer-POFs to manipulate the pore environments at the molecular level affords these materials a wide range of applications, providing a versatile platform for future advancements in material science. Looking forward, to fully realize the potential of these hybrid materials, the authors highlight the scalability, green synthesis methods, and potential for stimuli-responsive polymer-POF materials as critical areas for future research.

Hossain, Md Amjad↗

DOE OSTI2025

Novel Synthesis and Characterization of Uranium-Zirconium Carbonitride by Direct Casting

UZrCN has exhibited thermophysical properties beneficial to high temperature reactor applications such as nuclear thermal rockets. The present work investigates a novel liquid phase synthesis method involving the admission of nitrogen gas during arc melting of uranium, zirconium, and carbon. Initial microstructural examinations using SEM indicated that the samples remain heterogenous with zirconium-rich cores in a uranium-rich matrix. Heterogeneity resulted from large differences in melting temperature of the major constituents and rapid solidification. Additional EDS, combustion analysis, and inert gas fusion analysis proved that the core regions have both uranium and zirconium and establish that carbon and nitrogen are retained during the fabrication process. XRD clarifies that the light elements did not form compounds with the uranium matrix but rather incorporated into the core region forming a sub-stoichiometric UZrCN. Heat treatment performed on equimolar U-Zr-C resulted in an increase in the homogenous phase present with an XRD pattern reflecting a ternary UZrCN despite small amounts of segregation in the final button.

36 - MATERIALS SCIENCE↗

DOE OSTI2025

On Uranium-Zirconium Carbonitride Formation by Direct Casting - A Novel Synthesis Study

36 - MATERIALS SCIENCE↗

DOE OSTI2021

Effect of rice husk ash-derived activator on the structural build-up of alkali activated materials

Highlights: • Filtered and unfiltered sodium silicate solutions were synthesised from RHA. • The dissolution efficiency of RHA in NaOH solution was 76.3%. • RHA-derived activator showed a structural build-up comparable to the commercial activator in AAM pastes. • The undissolved residues in the unfiltered RHA-derived activator increased the yield stress. • Comparable compressive strength and early age gel formation were observed from both commercial and RHA-derived solutions. Waste-derived sodium silicates (SSs) were synthesised from rice husk ash (RHA) to produce alkali activated materials (AAMs) using fly ash and slag as precursors. The effects of these SSs on the structural build-up were investigated by monitoring the evolution of the viscoelasticity, ultrasonic pulse waves, setting time, and infrared spectra. Two types of RHA derived SSs (filtered SS and unfiltered SS) were prepared to investigate the effect of the undissolved residue on the hardening process. The derived SS contained a large portion of monomer silicate species. The results showed that the structural build-up mechanism was comparable between the AAMs activated by the filtered SS and a commercial SS. The unfiltered SS increased the yield stress of the paste by up to 10 times. However, the residues in the unfiltered SS had insignificant impacts on the gel formation and compressive strength when using identical SiO{sub 2}/Na{sub 2}O and Na{sub 2}O/binder ratios in the mix design.

36 MATERIALS SCIENCE↗