Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Monitoring of wildfires in boreal forests using large area AVHRR NDVI composite image data

Normalized difference vegetation index (NDVI) composite image data, produced from AVHRR data collected in 1990, were evaluated for locating and mapping the areal extent of wildfires in the boreal forests of Alaska during that year. A technique was developed to map forest fire boundaries by subtracting a late-summer AVHRR NDVI image from an early summer scene. The locations and boundaries of wildfires within the interior region of Alaska were obtained from the Alaska Fire Service, and compared to the AVHRR-derived fire-boundary map. It was found that AVHRR detected 89.5 percent of all fires with sizes greater than 2000 ha with no false alarms and that, for most cases, the general shape of the fire boundary detected by AVHRR matched those mapped by field observers. However, the total area contained within the fire boundaries mapped by AVHRR were only 61 percent of those mapped by the field observers. However, the AVHRR data used in this study did not span the entire time period during which fires occurred, and it is believed the areal estimates could be improved significantly if an expanded AVHRR data set were used.

Kasischke, Eric S.↗

Continuum spectral characteristics of bursts measured with BATSE large area detectors

The continuum spectra of bursts are studied with particular emphasis placed on the search for spectral subcomponents. The spectra observed in individual bursts show significant evolution throughout their durations. The degree to which hard and soft spectra are combined in bursts and the effect this has on the complexity of the observed spectra are addressed. In particular the presence of broad cusps in spectra in the 50-100 keV range are studied to determine both the degree to which these features are present in the LAD data and whether superposition of hard and soft spectra simultaneously can account for them. Also the time histories of the power output (ergs/sec) from bursts are studied to investigate the dynamic coupling between hard and soft spectra in bursts as a probe of the autonomy of the hard and soft emission mechanisms.

Pendleton, Geoffrey N.↗

Large area soft x-ray collimator to facilitate x-ray optics testing

The first objective of this program is to design a nested conical foil x-ray optic which will collimate x-rays diverging from a point source. The collimator could then be employed in a small, inexpensive x-ray test stand which would be used to test various x-ray optics and detector systems. The second objective is to demonstrate the fabrication of the x-ray reflectors for this optic using lacquer-smoothing and zero-stress electroforming techniques.

Espy, Samuel L.↗

On treatments of fetch and stability sensitivity in large-area estimates of sensible heat flux over sea ice

Bulk transfer coefficients estimated as a function of atmospheric stability and sea-ice lead width are combined with Arctic meteorological observations and ice thickness data to calculate the sensitivity of turbulent flux estimates to changes in lead width, wind speed, air temperature, and ice thickness for a high-concentration ice pack. These results are considered in terms of bulk transfer parameterizations that use a fixed transfer coefficient r that address atmospheric stability only. On the basis of the fetch-sensitive parameterizations considered here, differences in lead width for widths up to about 200 m can exert a substantial influence on sensible heat transfer coefficients and heat flux from leads under typical Arctic conditions. Fluxes from an open water lead decrease by 34% if fetch increases from 10 m to 100 m. This effect is greatest for open water leads, decreases considerably as leads refreeze, and is negligible for ice thicker than about 0.3 m. If open or newly refrozen leads make up 2% of the ice cover, than an increase in mean fetch from 10 m to 100 m yields a decrease of about 2 W/sq m in areally averaged flux from the ice pack. Calculations using observed and theoretical lead width distributions suggest that parameterizing lead widths in a sea ice model can be done effectively using a single, representative lead width rather than requiring a full distribution of widths. When coupled to the lowest atmospheric boundary layer using a bulk similarity theory model, this sensitivity of heat transfer to fetch results in substantially higher near-surface air temperatures over narrow leads, with equilibrium air temperatures decreasing by about 50% as fetch increases from 10 to 100 m.

Maslanik, J. A.↗

Fabrication of large-area CCD detectors on high-purity, float-zone silicon

In this report on the fabrication of a 1024 x 1024 charge coupled device (CCD) imager to be used as a soft x-ray sensor onboard the Advanced X-ray Astronomical Facility (AXAF), the following conclusions were found: the dislocations that limited the performance of the high resistivity imager were characterized; the sources of stress were identified and the dislocations found were eliminated; and a charge transfer inefficiency (CTI) of 10(exp -6) and read noise as low as 1.3/e was demonstrated. This sensor must have low noise and a low CTI and must be radiation hardened to withstand any radiation damage from a space environment.

Gregory, J. A.↗

Thin, Large-Area Positive Electrodes in Na/NiCl(2) Cells

Thin, larger-area, noncylindrical positive electrodes investigated for use in place of smaller-area, cylindrical positive electrodes now used in Na/NiCl(2) high-temperature rechargeable electrochemical cells and batteries. Greater power densities achievable, without compromising on energy densities.

Bugga, Ratnakumar↗

Studies of Large-Area Inversion-Layer Metal-Insulator-Semiconductor (IL/MIS) Solar Cells and Arrays

Many inversion-layer metal-insulator-semiconductor (IL/MIS) solar cells have been fabricated. There are around eighteen 1 cm(exp 2) IL/MIS solar cells which have efficiencies greater than 7%. There are only about three 19 cm(exp 2) IL/MIS cells which have efficiencies greater than 4%. The more accurate control of the thickness of the thin layer of oxide between aluminum and silicon of the MIS contacts has been achieved. A lot of effort and progress have been made in this area. A comprehensive model for MIS contacts under dark conditions has been developed that covers a wide range of parameters. It has been applied to MIS solar cells. One of the main advantages of these models is the prediction of the range of the thin oxide thickness versus the maximum efficiencies of the MIS solar cells. This is particularly important when the thickness is increased to 25 A. This study is very useful for our investigation of the IL/MIS solar cells. The two-dimensional numerical model for the IL/MIS solar cells has been tried to develop and the results are presented in this report.

Ho, Fat Duen↗

The Effects of Sensor Field-of-View on the Geometrical Characteristics of Sea Ice Leads and Implications for Large-Area Heat Flux Estimates

The release of heat from sea ice fractures ('leads') is an important component of the heat budget in the Arctic, but their impact on regional scale climate is difficult to assess without more information on their distribution in both space and time. Remote sensing of leads using satellite data, specifically AVHRR thermal and Landsat visible-band imagery, is examined empirically with respect to lead width, orientation, and area fraction. The geometrical aspects of the sensor are simulated so that the effect of sensor field-of-view on retrieved lead width statistics can be assessed. This is done using Landsat data and simulated lead networks degraded to AVHRR pixel sizes. The analyses illustrate how leads of sufficiently high contrast tend to 'grow' with increasing pixel size and how small or low contrast leads disappear. The relationship between lead contrast and the width/field-of-view ratio is also examined in order to determine the limits of lead detectability, and illustrates the multivalued nature of the problem of lead width retrieval. To help quantify the importance of changes in lead statistics, turbulent heat flux is calculated as a function of lead width and lead fraction. It is shown that pixel size has a substantial effect on estimates of turbulent heat transfer from leads to the atmosphere.

Key, J.↗

Research with Large Area Imaging X-Ray Telescope Sounding Rocket Program

We are engaged in a program to develop focussing hard X-ray telescopes in a double conical or Wolter 1 geometry that function up to 100 keV by employing small graze angles and multilayer coatings. Directly polished substrates are not an option because they are too thick to be nested efficiently. The only alternative is to fabricate the very thin substrates by replication. Our objective is the production of integral cylindrical substrates because they should result in better angular resolution than segmented foil geometries. In addition, integral cylinders would be more resistant to possible stress from deep multilayer coatings than segmented ones. Both electroforming of nickel (method of SkX, JET-X, and XMM) and epoxy replication are under consideration. Both processes can utilize the same types of mandrels and separation agents- While electroforming can produce substrates that are thin, the high density of the nickel may result in high weight optics for some missions. For convenience, experimentation with replication and coating is being carried out initially on flats. Our replication studies include trials with gold and carbon separation agents. This paper reports on our efforts with epoxy replicated optics.

Gorenstein, Paul↗

New Mission Concepts for Astrophysics Large Area X-Ray Spectroscopy Mission

Work at SAO was performed under the overall direction of Dr. Harvey Tananbaum, the Principal Investigator for the program. Dr. Jay Bookbinder was responsible for day to day program coordination at SAO and liaison with GSFC. Dr. Nicholas E. White served as GSFC Technical Officer for the Grant. The effort was directed at formulating the general characteristics and scientific requirements of the contemplated mission. While funding and therefore effort was limited, nonetheless SAO was involved in a broad range of activities. These activities were defined by our SAO proposal to GSFC that were subsequently accepted and funded by this Grant. The main activities were: Support of mission studies. Support the development of science requirements. and Performance of selected engineering studies and trades. During this period, an integrated GSFC/SAO management team began to form and work together. Jean F. Grady was appointed Project Formulation Manager at GSFC and assumed the overall management direction of the project including coordination of work performed under the grant.

Tananbaum, Harvey↗

4H-SiC UV Photo Detector with Large Area and Very High Specific Detectivity

Pt/4H-SiC Schottky photodiodes have been fabricated with the device areas up to 1 sq cm. The I-V characteristics and photo-response spectra have been measured and analyzed. For a 5 mm x 5 mm area device leakage current of 1 x 10(exp 15)A at zero bias and 1.2 x 10(exp 14)A at -IV have been established. The quantum efficiency is over 30% from 240nm to 320nm. The specific detectivity, D(sup *), has been calculated from the directly measured leakage current and quantum efficiency data and are shown to be higher than 10(exp 15) cmHz(sup 1/2)/W from 210nm to 350nm with a peak D(sup *) of 3.6 x 10(exp 15)cmH(sup 1/2)/W at 300nm.

Yan, Feng↗

Development of CIGS2 Thin Films on Ultralightweight Flexible Large Area Foil Sunstrates

The development of thin film solar cells is aimed at reducing the costs for photovoltaic systems. Use of thin film technology and thin foil substrate such as 5-mil thick stainless steel foil or 1-mil thick Ti would result in considerable costs savings. Another important aspect is manufacturing cost. Current single crystal technology for space power can cost more than $ 300 per watt at the array level and weigh more than 1 kg/sq m equivalent to specific power of approx. 65 W/kg. Thin film material such as CuIn1-xGaxS2 (CIGS2), CuIn(1-x)Ga(x)Se(2-y)S(y) (CIGSS) or amorphous hydrogenated silicon (a-Si:H) may be able to reduce both the cost and mass per unit area by an order of magnitude. Manufacturing costs for solar arrays are an important consideration for total spacecraft budget. For a medium sized 5kW satellite for example, the array manufacturing cost alone may exceed $ 2 million. Moving to thin film technology could reduce this expense to less than $ 500K. Earlier publications have demonstrated the potential of achieving higher efficiencies from CIGSS thin film solar cells on 5-mil thick stainless steel foil as well as initial stages of facility augmentation for depositing thin film solar cells on larger (6 in x 4 in) substrates. This paper presents the developmental study of achieving stress free Mo coating; uniform coatings of Mo back contact and metallic precursors. The paper also presents the development of sol gel process, refurbishment of selenization/sulfurization furnace, chemical bath deposition (CBD) for n-type CdS and scrubber for detoxification of H2S and H2Se gases.

Dhere, Neelkanth G.↗

Estimation of comprehensive forest variable sets from multiparameter SAR data over a large area with diverse species

Polarimetric and multifrequency data from the NASA/JPL airborne synthetic aperture radar (AIRSAR) have been used in a multi-tier estimation algorithm to calculate a comprehensive set of forest canopy properties including branch layer moisture and thickness, trunk density, trunk water content and diameter, trunk height, and subcanapy soil moisture. The estimation algorithm takes advantage of species-specific allometric relations, and is applied to a 100Km x 100Km area in the Canadian boreal region containing many different vegetation species types. The results show very good agreement with ground measurements taken at several focused and auxiliary study sites. This paper expands on the results reported in [1] and applies the algorithm on the regional scale.

variable estimation forestry multiparameter SAR↗

Large area polysilicon films with predetermined stress characteristics and method for producing same

Multi-layer assemblies of polysilicon thin films having predetermined stress characteristics and techniques for forming such assemblies are disclosed. In particular, a multi-layer assembly of polysilicon thin films may be produced that has a stress level of zero, or substantially so. The multi-layer assemblies comprise at least one constituent thin film having a tensile stress and at least one constituent thin film having a compressive stress. The thin films forming the multi-layer assemblies may be disposed immediately adjacent to one another without the use of intermediate layers between the thin films. Multi-layer assemblies exhibiting selectively determinable overall bending moments are also disclosed. Selective production of overall bending moments in microstructures enables manufacture of such structures with a wide array of geometrical configurations.

Heuer, Arthur H.↗

Recent Results on SNRs and PWNe from the Fermi Large Area Telescope

a) Symbiotic Binary System: White dwarf + red giant system. b) Nova: White dwarf builds up mass envelope to the point of thermonuclear fusion. c) Dramatic increase in visual magnitude. d) Recurrent Nova? e) Hints but no strong confirmation of previous nova f) Pre-nova activity: 1) White dwarf shows ongoing variability at level of several in magnitude. 2) V407 Cyg companion is a Mira star showing variability at level of several in magnitude. g) Origin of the gamma rays? 1) Strong shock propagating into dense medium around giant star land stellar wind. 2) Pion decay or electron processes?

Hays, Elizabeth↗

Future Multiwavelength Studies with the Fermi Large Area Telescope

With two and a half years of experience, Fermi LAT contributions to multiwavelength studies have become an integral part of many astrophysical research projects. Future efforts will benefit from (1) Deeper LAT exposures} resulting in more sources; (2) More high-energy, high-angular resolution photons, giving better source locations and imaging; (3) Faster analysis of variability and announcements to the community; and (4) Longer time series for studies of variable source properties in comparison to other wavelengths.

Thompson, David J.↗