Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The combined effects of Mg 2+ and Sr 2+ incorporation during CaCO 3 precipitation and crystal growth

Calcite (CaCO 3 ) composition and properties are defined by the chemical environment in which CaCO 3 forms. However, a complete understanding of the relationship between aqueous chemistry during calcite precipitation and resulting chemical and physical CaCO 3 properties remains elusive; therefore, we present an investigation into the coupled effects of divalent cations Sr 2+ and Mg 2+ on CaCO 3 precipitation and subsequent crystal growth. Through chemical analysis of the aqueous phases and microscopy of the resulting calcite phases in compliment with density functional theory calculations, we elucidate the relationship between crystal growth and the resulting composition (elemental and isotopic) of calcite. The results of this experimental and modeling work suggest that Mg 2+ and Sr 2+ have cation-specific impacts that inhibit calcite crystal growth, including: (1) Sr 2+ incorporates more readily into calcite than Mg 2+ (D Sr > D Mg ), and increasing [Sr 2+ ] t or [Mg 2+ ] t increases D Sr ; (2) the inclusion of Mg 2+ into structure leads to a reduction in the calcite unit cell volume, whereas Sr 2+ leads to an expansion; (3) the inclusion of both Mg 2+ and Sr 2+ results in a distribution of unit cell impacts based on the relative positions of the Sr 2+ and Mg 2+ in the lattice. These experiments were conducted at saturation indices of CaCO 3 of ~4.1, favoring rapid precipitation. This rapid precipitation resulted in observed Sr isotope fractionation confirming Sr isotopic fractionation is dependent upon the precipitation rate. We further note that the precipitation and growth of calcite favors the incorporation of the lighter 86 Sr isotope over the heavier 87 Sr isotope, regardless of the initial solution conditions, and the degree of fractionation increases with D Sr . In sum, these results demonstrate the impact of solution environment to influence the incorporation behavior and crystal growth behavior of calcite. These factors are important to understand in order to effectively use geochemical signatures resulting from calcite precipitation or dissolution to gain specific information.

58 GEOSCIENCES↗
DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗
DOE OSTI2024

Evaluation of average leaf inclination angle quantified by indirect optical instruments in crop fields

Average leaf inclination angle ($\overline{θ}$ L ) is an important canopy structure variable that influences light regime, photosynthesis, and evapotranspiration of plants. $\overline{θ}$ L can be measured through direct methods (e.g., protractor), which are labor-intensive and time-consuming, or through indirect optical instruments, which are more efficient than the direct methods. However, uncertainties of different indirect optical instruments for quantifying $\overline{θ}$ L remain largely unquantified. In this study, we evaluated and compared the performances of three major indirect optical instruments: (1) LAI-2200, (2) 30°-tilted camera, and (3) digital hemispherical photography (DHP), in different crop fields over a growing season, benchmarked with direct measurements. LAI-2200 and 30°-tilted camera showed higher agreement with direct $\overline{θ}$ measurements (R 2 = 0.54, RMSE = 7.37°; R 2 = 0.58, RMSE = 8.08°) than DHP (R 2 = 0.14, RMSE = 13.96°). Different performances of indirect optical instruments could be attributed to the accuracy of gap fraction measurement and the performance of the $\overline{θ}$ L quantification algorithms. When using the LAI-2200 algorithm, larger gap fraction gradients over view zenith angles led to larger $\overline{θ}$ L values, and smaller gap fraction gradients led to smaller $\overline{θ}$ L values. Such error propagation was larger in sparse canopy than in dense canopy. The Wilson G function of the LAI-2200 algorithm performed better in estimating $\overline{θ}$ L than the G function based on the ellipsoidal LAD function used by the CAN_EYE algorithm. We also proposed a modification of the LAI-2200 algorithm, which further improved the performance of LAI-2200 and 30°-tilted cameras in estimating $\overline{θ}$ L . We envision that the low-cost 30°-tilted cameras provide a promising sensor solution to continuously monitor canopy structure for various ecosystems.

30°-tilted camera↗
DOE OSTI2023

Direct Extraction of Uniform Lignin Microspheres from Bamboo Using a Polyol-Based Deep Eutectic Solvent

Conventional preparation of lignin micro-/nano-particles (LMNPs) often needs multiple steps accompanied by high cost, low efficiency, and low yield. Herein, this study established a polyhydric alcohol-based deep eutectic solvent (PA-DES) fractionation for direct LMNP assembly from raw lignocellulose. The results indicated that lignin was significantly extracted by 41.55–70.33% depending on the PA-DES varieties. With lignin removal, the substrate showed high glucan enzymatic saccharification from 70.44 to 100%. Specially, over 90% lignin could be recovered in each PA-DES, and the obtained LMNPs showed quite uniform spherical morphology with a tunable size of 550–3254 nm and narrow polydispersity index (PDI) of 0.295–0.398. The proposed DES showed a near theoretical recovery yield, which still featured excellent fractionation performance even after three cycles of reuse. In conclusion, the findings highlight the simultaneous utilization of cellulose and lignin in a one-pot biomass fractionation under mild conditions with sugars and LMNPs as the coproducts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interplay of superconducting, metallic, and crystalline states of composite fermions at 𝜈 = $\frac{1}{6}$ in wide quantum wells

Evidence for developing fractional quantum Hall effect (FQHE) at filling fraction 𝜈 = 1/6 and 1/8 was recently reported in wide GaAs quantum wells [Wang et al., Phys. Rev. Lett. 134, 046502 (2025)]. In this article, we theoretically investigate the nature of the state at 𝜈 = 1/6 as a function of the quantum well width and the density by considering composite-fermion (CF) crystals, CF Fermi sea, and various kinds of paired CF states. The 𝑓-wave paired state has the lowest energy among the paired CF states. However, for parameters of interest, the energies of the CF crystal, the CF Fermi liquid, and the 𝑓-wave paired CF state are too close to distinguish. We, therefore, predict that 𝑖𝑓 the FQHE at 𝜈 = 1/6 is experimentally confirmed, this state would be an 𝑓-wave paired state of CFs, which can be verified by measurement of its thermal Hall conductance. Exact diagonalization studies on clean systems with up to eight electrons show that the ground states at 𝜈 = 𝑛/(6⁢𝑛 ± 1) are incompressible for all widths and densities we have considered, and are well described by the corresponding Laughlin and Jain states. We propose a phase diagram for large quantum well widths and densities in which at zero disorder, incompressible FQHE states are stabilized at 𝜈 = 𝑛/(6⁢𝑛 ± 1) and 𝜈 = 1/6, but in between these fillings the CF crystal is stabilized. We also present a qualitative discussion on the effects of disorder and propose a schematic phase diagram based on it. With disorder, which creates a spatial variation in the filling factor, two regimes are identified: (i) for small disorder, when the incompressible states percolate at the special fillings, FQHE with quantized Hall plateaus and vanishing longitudinal resistance should occur; and (ii) for larger disorder, when the CF crystal percolates, the longitudinal resistance rises with decreasing temperature but the domains of FQHE liquid produce minima at the special filling factors. Here, experiments are consistent with the latter scenario. We also mention a possible connection of the phase diagram presented here to a puzzling behavior observed for the fractional quantum anomalous Hall effect in pentalayer graphene.

Composite fermions↗
DOE OSTI2023

Topological order in interacting semimetals

It has recently been demonstrated that it is possible to open a gap in a magnetic Weyl semimetal, while preserving the chiral anomaly along with the charge conservation and translational symmetries, which all protect the gapless nodes in a weakly interacting semimetal. The resulting state was shown to be a nontrivial generalization of a non-Abelian fractional quantum Hall liquid to three dimensions. Here we point out that a second fractional quantum Hall state exists in this case. This state has exactly the same electrical and thermal Hall responses as the first, but a distinct (fracton) topological order. Moreover, the existence of this second fractional quantum Hall state necessarily implies a gapless phase, which has identical topological response to a noninteracting Weyl semimetal, but is distinct from it. Here, this may be viewed as a generalization (in a weaker form) of the known duality between a noninteracting two-dimensional Dirac fermion and QED 3 to 3+1 dimensions. In addition we discuss a (3+1)-dimensional topologically ordered state, obtained by gapping a nodal line semimetal without breaking symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Torus geometry eigenfunctions of an interacting multi-Landau-level Hamiltonian

A short-ranged, rotationally symmetric multi-Landau-level model Hamiltonian for strongly interacting electrons in a magnetic field was proposed [A. Anand et al., Phys. Rev. Lett. 126, 136601 (2021)] with the key feature that it allows exact many-body eigenfunctions on the disk not just for quasiholes but for all charged and neutral excitations of the entire Jain sequence filling fractions. We extend this to geometries without full rotational symmetry, namely, the torus and cylinder geometries, and present their spectra. Exact diagonalization of the interaction on the torus produces the low-energy spectra at filling fraction v = n/(2⁢pn + 1) that is identical, up to a topological (2⁢pn + 1)-fold multiplicity, to that of the integer quantum Hall spectra at v = n, for the incompressible state as well as all excitations. While the ansatz eigenfunctions in the disk geometry cannot be generalized to closed geometries such as torus or sphere, we show how to extend them to cylinder geometry. Meanwhile, we show eigenfunctions for charged excitations at filling fractions between 1/3 and 2/5 can be written on the torus and the spherical geometries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Extracting spinon self-energies from two-dimensional coherent spectroscopy

Two-dimensional coherent spectroscopy (2DCS) is a nonlinear spectroscopy technique capable of identifying whether apparent continua in linear response are made out of multiplets of sharp deconfined quasiparticles. This makes it a potent tool for experimental identification of fractionalized phases. Previous discussions have focused on limits where the quasiparticles in question are infinitely long lived. In this paper we discuss 2DCS in the regime where the fractionalized quasiparticles can themselves decay. We introduce a powerful path-integral-based approach, whereby the computation of nonlinear susceptibilities reduces to an efficient exercise in diagrammatic perturbation theory. Here, we apply this method to compute the 2DCS response of the one-dimensional transverse field Ising model, in the presence of integrability-breaking perturbations. We discuss aspects of the self-energy of the fractionalized quasiparticles that may be extracted via 2DCS, such as the momentum-dependent decay rate.

1-dimensional spin chains↗
DOE OSTI2023

Two-fluid theory of composite bosons and fermions and the quantum Hall proximity effect

Here we propose a two-fluid description of fractional quantum Hall systems, in which one component is a condensate of composite bosons and the other a Fermi liquid formed by composite fermions (or simply electrons). We employ the theory to model the interface between a fractional quantum Hall liquid and a (composite) Fermi liquid metal, where we find a penetration of quantum Hall condensate into the metallic region reminiscent of the proximity effect in superconductor-metal interfaces. We also find a novel and physically reasonable set of gapped quasielectron and neutral modes in fractional quantum Hall liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Theory of topological defects and textures in two-dimensional quantum orders with spontaneous symmetry breaking

In this article, we consider two-dimensional (2d) quantum many-body systems with long-range orders, where the only gapless excitations in the spectrum are Goldstone modes of spontaneously broken continuous symmetries. To understand the interplay between classical long-range order of local order parameters and quantum order of long-range entanglement in the ground states, we study the topological point defects and textures of order parameters in such systems. We show that the universal properties of point defects and textures are determined by the remnant symmetry enriched topological order in the symmetry-breaking ground states with a nonfluctuating order parameter, and provide a classification for their properties based on the inflation-restriction exact sequence. We highlight a few phenomena revealed by our theory framework. First, in the absence of intrinsic topological orders, we show a connection between the symmetry properties of point defects and textures to deconfined quantum criticality. Second, when the symmetry-breaking ground state has intrinsic topological orders, we show that the point defects can permute different anyons when braided around. They can also obey projective fusion rules in the sense that multiple vortices can fuse into an Abelian anyon, a phenomenon for which we coin “defect fractionalization.” Finally, we provide a formula to compute the fractional statistics and fractional quantum numbers carried by textures (skyrmions) in Abelian topological orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Composite Fermion Pairing Induced by Landau Level Mixing

Pairing of composite fermions provides a possible mechanism for fractional quantum Hall effect at even denominator fractions and is believed to serve as a platform for realizing quasiparticles with non-Abelian braiding statistics. We present results from fixed-phase diffusion Monte Carlo calculations which predict that substantial Landau level mixing can induce a pairing of composite fermions at filling factors v = 1/2 and v = 1/4 in the l = -3 relative angular momentum channel, thereby destabilizing the composite-fermion Fermi seas to produce non-Abelian fractional quantum Hall states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Timeseries Unlabeled and Labeled Photos, Modeled Stream Elevation, and (Meta)Data of Variably Inundated Streams Across The Yakima River Basin, Washington, United States (v2)

This dataset is associated with the “River Monitoring Photos” (RMP) study and subsequent manuscript (Bao et al. 2025. Monitoring river flow status using low-cost wildlife camera and image segmentation artificial intelligence doi: 10.1016/j.envsoft.2025.106715). Game camera timeseries photos were collected to evaluate stream variable inundation via changes in width. A subset of photos was labeled for training the YOLOv8 and Mask2Former models and used to segment water surface fractions from all the game camera photos.This data package was originally published in March 2024. It was updated in October 2025 (v2) to add additional photos and files associated with the manuscript (i.e., processed data, labeled photos, and trained models). For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About.In addition to a readme, this data package also includes two file-level metadata (FLMD) files that describes each file and two data dictionaries (DD) that describe all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) readme; (4) field metadata; and (5) folders containing game camera photos and manuscript-associated files. Each Yakima River Basin site has a folder that contains subfolders for each month photos were collected. There is also a folder for files associated with the manuscript which has subfolders for labeled data, trained models, Yakima River Basin site water surface fractions, and USGS site water surface fractions. All files are .csv, .json, .txt, .yaml, .pth, .pt, or .pdf. We thank the Confederated Tribes and Bands of the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

How Austenitic Is a Martensitic Steel Produced by Laser Powder Bed Fusion? A Cautionary Tale

Accurate phase fraction analysis is an essential element of the microstructural characterization of alloys and often serves as a basis to quantify effects such as heat treatment or mechanical deformation. Additive manufacturing (AM) of metals, due to the intrinsic nonequilibrium solidification and spatial variability, creates additional challenges for the proper quantification of phase fraction. Such challenges are exacerbated when the alloy itself is prone to deformation-induced phase transformation. Using commonly available in-house X-ray diffraction (XRD) and electron backscatter diffraction (EBSD) and less commonly used synchrotron-based high-energy X-ray diffraction, we characterized nitrogen-atomized 17-4 precipitation-hardening martensitic stainless steel, a class of AM alloy that has received broad attention within the AM research community. On the same build, our measurements recovered the entire range of reported values on the austenite phase fractions of as-built AM 17-4 in literature, from ≈100% martensite to ≈100% austenite. Aided by Calphad simulation, our experimental findings established that our as-built AM 17-4 is almost fully austenitic and that in-house XRD and EBSD measurements are subject to significant uncertainties created by the specimen’s surface finish. Hence, measurements made using these techniques must be understood in their correct context. Our results carry significant implications, not only to AM 17-4 but also to AM alloys that are susceptible to deformation-induced structure transformation and suggest that characterizations with less accessible but bulk sensitive techniques such as synchrotron-based high energy X-ray diffraction or neutron diffraction may be required for proper understanding of these materials.

17-4 steel↗
DOE OSTI2024

Air Classification of Forestry Residues for Fast Pyrolysis

Understanding critical biomass attributes through efficient fractionation is crucial for advancing sustainable pyrolysis for renewable energy and chemical production. This study investigates the intricate relationship between biomass preprocessing and pyrolysis product yields, employing the air classification technique for the treatment of loblolly pine residues with varying moisture content. A comprehensive exploration of the physicochemical properties of air-classified loblolly pine informs a sophisticated pyrolysis simulation model. Given the complex and multifaceted nature of biomass pyrolysis, operating across diverse temporal and spatial scales, a pyrolysis kinetics-based CFD–DEM simulation method is employed to predict product yields. Results showed that the elevated moisture content amplifies particle adhesiveness, necessitating augmented air velocities for effective separation, thereby influencing the efficiency of the separation process. While carbon and hydrogen contents exhibit relative stability across diverse moisture contents and blower frequencies, the oxygen content undergoes noticeable changes. For example, the oxygen contents were measured as 29.2 and 38.6 wt% in the light fraction of 30% moisture content sample at blower frequencies of 10 and 20 Hz, respectively. An intriguing finding emerges from pyrolysis simulation, indicating that a lower blower frequency in air classification moderately enhances bio-oil yield and significantly improves its quality, particularly in terms of water content. For instance, the water content in the bio-oil was about 1.5% and 10% in the heavy and light fractions, respectively from 10% moisture sample under 15 Hz blower frequency.

09 - BIOMASS FUELS↗
DOE OSTI2024

Microstructural Passivation of Patterned Al 2 O 3 Back Contacts on CdS/CdTe Solar Cells

Abstract Patterned aluminum oxide (Al 2 O 3 ) back contact on cadmium telluride (CdTe) solar cells can effectively mitigate the loss of the majority carriers while retaining the passivation benefits for minority carriers. This study investigates the impact of the point‐contact geometry on cell performance, where the spacing of the microholes is systematically varied at a constant microhole diameter (≈16 µm). Microhole arrays are created on an evaporated Al 2 O 3 layer (≈30 nm) on CdTe using laser‐beam lithography and selective wet etching processes. Comparative analysis indicates a significant decrease in fill factor (FF) and short‐circuit current ( I SC ) when the contact fraction falls below 30%, likely due to the Al 2 O 3 barrier impeding majority carriers. Above this fraction, FF and I SC are comparable to those of baseline CdTe cells without Al 2 O 3 . Open‐circuit voltage ( V OC ) shows a gradual decrease as Al 2 O 3 coverage is reduced but exhibits a slight increase (<15 mV) when the contact fraction exceeds 30%. Cathodoluminescence (CL) characterization reveals that significantly improved radiative recombination occurs within the CdTe grain bulk with Al 2 O 3 , whereas this effect on grain boundaries is minimal. The findings imply complex local carrier dynamics in the patterned back‐contact region, closely tied to the microstructural properties of CdTe‐based solar cells.

Roy, Etee Kawna↗
DOE OSTI2021

A method to apply Zavitsas' aqueous electrolyte model to multicomponent solutions and its equivalence to Zdanovskii's rule

Abstract Zavitsas developed an aqueous electrolyte thermodynamic model and applied it to single electrolyte solutions previously. Here, a method to apply the model to multicomponent solutions is derived by setting the water activity to the mole fraction of free water in the mixture. The method is shown to work effectively for the CsBr‐KNO 3 ‐H 2 O and CsCl‐KNO 3 ‐H 2 O systems at 100.3°C even at concentrations greater than 6 molal. The largest error in the prediction of water activities was just −0.00365 for the CsBr‐KNO 3 ‐H 2 O system and −0.00631 for the CsCl‐KNO 3 ‐H 2 O system. Zavitsas' model naturally obeys Zdanovskii's rule because when two electrolyte solutions with the same fraction of free water are mixed together, water is obviously going to have that same fraction in the mixture. This means that Zavitsas' model will likely work well for the many electrolytes that obey Zdanovskii's rule.

Reynolds, Jacob G.↗
DOE OSTI2023

Investigation of the effects of ternary deep eutectic solvent composition on pretreatment of sorghum stover

Biomass‐derived deep eutectic solvents (DESs) have been introduced as promising pretreatment and fractionation solvents because of their mild processing conditions, easy synthesis, and green solvent components from biomass. In recent DES studies, solvent‐based third constituents like water, ethanol, and others improve the processibility of typical binary DESs. However, the impacts of these components are not well understood. Here, two solvent‐based constituents, including water and ethylene glycol, were applied to 3,4‐dihydroxybenzoic acid (DHBA)‐based DES system for improving the conversion efficiency of cellulose‐rich fraction and the properties of lignin fraction. Chemical composition, enzymatic digestibility, degree of polymerization of cellulose and physicochemical properties of lignin were used to evaluate the impact of each third constituent on biomass processing. Ternary ChCl‐DHBA DESs exhibited better performances in delignification, fermentable sugar production, and preservation of β‐O‐4 ether linkage in lignin compared with binary ChCl‐DHBA DES.

09 BIOMASS FUELS↗
DOE OSTI2021

Morphological and Chemical Differentiation between Tunisian Populations of Pinus halepensis , Pinus brutia , and Pinus pinaster

Abstract The lipid fraction of seeds from different pine species and populations was studied regarding total lipid content, fatty acid profile and vitamin E composition. The investigated seeds contained a high percentage of lipid (13.6 to 31.5 %). Lipid fractions were found to be rich in vitamin E, which varied significantly among species and populations. P. halepensis (Ph−Hn) showed the highest content of vitamin E (256.3 mg/kg of seeds) and the uppermost content of α ‐tocopherol (44 mg/kg). However, P. halepensis (Ph−Kas) was the richest in γ ‐tocopherol (204.9 mg/kg). Lipid fractions had a low content of δ ‐tocopherol (1.2 to 3.6 mg/kg. The highest content of γ ‐tocotrienol (∼18 %) was determined for P. halepensis (Ph−Dc and Ph−Hn). Thirteen fatty acids were identified by GC‐FID with significant variation between the investigated species. The linoleic acid was the major fatty acid followed by oleic acid and palmitic acid. The chemical differentiation among species for the composition of fatty acids and vitamin E was confirmed by PCA. Significant correlations were observed between the content of vitamin E and fatty acids and ecological parameters of P. halepensis populations.

Khouja, Mariem↗