Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Analysis of orientation-dependent deformation mechanisms in additively manufactured Zr using in-situ micromechanical testing: Twinning and orientation gradient

Here, orientation-dependent plasticity in zirconium (Zr)-alloy, which is produced through ultrasonic additive manufacturing (UAM) with subsequent hot-isostatic pressing (HIP), was analyzed by recording electron backscattered diffraction (EBSD) data during in-situ micromechanical testing. Three (0001) plane orientations of a hexagonal close-packed (HCP) structure were analyzed parallel to (1) the rolling direction [X||tensile direction (TD)], (2) the build direction [Z], and (3) the transverse direction [Y]. The analysis revealed that the grains with ~<0001>||TD show twin-dominant plasticity with three variants from {10 $\overline{1}$ 2}<$\overline{1}$ 011>; minor slipping with ($10\overline{1}$ 1)[$\overline{2}$ 113], and ($11\overline{2}$ 2)[$\overline{1} \overline{1}$ 23] pyramidal slip has also been observed. However, grains with orientation ~<0001>⊥TD are mainly sensitive to dislocations assisted plasticity-leading to orientation gradients formation. Furthermore, the neck formation was identified as originating from higher populated micro-crack locations and their association with localized plasticity at defect points in the UAM material. These results demonstrate that minimization of impurities to enable grain growth across prior foil interfaces makes HIP an effective methodology for producing Zr plate, with deformation characteristics expected for conventionally manufactured Zr.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Recrystallization driven softening and heating rate dependencies of FeCrAl nuclear fuel cladding during accident transients

A refined understanding of FeCrAl cladding behavior during rapid transients is critical for its potential deployment in light-water reactors. Current assessments focus on transient burst testing metrics such as balloon geometry, burst temperature, and hoop stress, often used as proxies for simpler conventional tensile properties. However, directly correlating isothermal tensile and creep data with accident transient scenarios remains a challenge, although it is essential for high fidelity model development. Recent modeling based on tensile tests up to 800 °C, conducted with both immediate loading and a 10-minute soak, showed that immediate loading better predicts experimental burst temperatures, indicating a thermal softening effect. Building upon this observation, the current study connects transient performance, microstructural evolution, and high-temperature tensile properties by leveraging results from C26M claddings burst tests performed at heating rates of 1–50 °C/s and hoop stresses from 25 to 100 MPa. At 25 MPa, rupture temperatures varied by only 6 °C, but at 100 MPa, the difference reached 116 °C, with faster heating yielding higher burst temperatures. Microstructural analysis identified recrystallization as the primary cause of heating rate-dependent softening, eliminating prior cold-working. In-situ thermomechanical data linked ballooning onset to localized instabilities, similar to ultimate tensile strength behavior in conventional tensile tests. High heating rates correlated with immediate loading tensile data, while lower rates matched soaked data. Furthermore, by linking burst performance to microstructural evolution and tensile properties, this work provides a foundation for more accurate modeling of FeCrAl claddings and potentially other Fe-based materials under accident conditions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Few-layer tin sulfide (SnS): Controlled synthesis, thickness dependent vibrational properties, and ferroelectricity

Group IV monochalcogenides, anisotropic van der Waals crystals (and black phosphorus analogues), are attracting increasing interest due to a number of exceptional properties including anisotropic optoelectronics and multiferroicity predicted and in part realized in the ultrathin limit. Due to their enhanced chemical reactivity, both exfoliation and synthesis of monolayer and few-layer crystals pose challenges not found in other 2D/layered materials, such as the transition metal dichalcogenides. In this work, we show that SnS synthesis on SnS 2 van der Waals substrates can address these challenges and consistently produces few-layer flakes, a capability that is explained via analysis of real-time microscopy of the growth process. Raman spectroscopy combined with efficient computations of the Raman-active modes across an extended thickness range enables a comprehensive understanding of the evolution of the vibrational properties of SnS with number of layers. Lateral piezoresponse force microscopy provides unprecedented insight into the stacking-dependent polarization and ferroelectric domain structures in large few-layer SnS flakes. The combined results establish a basis for further fundamental studies and applications of SnS and other group IV monochalcogenides in the few-layer regime.

36 MATERIALS SCIENCE↗
DOE OSTI2026

BISON analyses of TRISO fuel performance, its dependence on time-at-temperature, and possible implications for fuel design and qualification

The Advanced Gas Reactor Fuel Development and Qualification (AGR) program has established a substantial technical foundation to support private entry into the U.S. high-temperature gas-cooled reactor market. However, emerging tristructural isotropic (TRISO)-fueled reactor applications include small modular reactors and microreactors with longer fuel residence times, which may expose fuels to higher time-at-temperature (TAT) values than were explored by the AGR program. Increased TAT could affect diffusive and thermomechanical behaviors such as Pd penetration, fission gas release, creep, and fission product transport. In this work, we applied multiscale best-estimate BISON fuel performance modeling to assess these effects within a representative design space based on the AGR-5/6/7 experiment and analyzed trends in predicted particle and compact fuel performance metrics with possible implications for near-term fuel design and qualification. BISON unambiguously predicted that TRISO fuel performance is sensitive to TAT. Increasing TAT was not predicted to increase the magnitude of failure-inducing tangential stresses in particle coating layers. Predictions obtained using a mechanistic model for Pd penetration indicated that penetration depth does not depend strongly on TAT. While these observations suggest that AGR testing provides a conservative upper bound for the steady-state operation of TRISO particles at lower powers and higher residence times, BISON also predicted that the release of poorly retained Ag would increase with TAT. Because these analyses applied models to extrapolate beyond the available experimental data, the authors recommend performing targeted experiments to confirm these predictions. Nevertheless, these predictions may provide reactor developers with enough confidence to make near-term design decisions associated with the potential fuel performance trade-offs of increasing TAT.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Isotope dependence of muon-to-electron conversion

The lepton-flavor-violating conversion of a muon into an electron in the field of a nucleus is one of the most sensitive probes of physics beyond the Standard Model and the experiments Mu2e, COMET, and DeeMe will explore uncharted terrain in the near future. An observation of this μ - → e - conversion process opens up the possibility to distinguish the underlying operator or new-physics model by exploiting the target-nucleus dependence of the conversion rate. To facilitate the choice of optimal targets we provide μ - → e - conversion rates for all stable isotopes and estimate nuclear-structure uncertainties. Our results enable studies of mixed or enriched target materials that are particularly promising for distinguishing scenarios in which the muon converts either on protons or neutrons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Rare-earth-doped electrospun scheelite CaWO 4 nanofibers with excitation-dependent photoluminescence and high-linearity cathodoluminescence for ratiometric UV wavelength and radiation sensors

Scheelite structured AWO 4 compounds (A = Ba, Ca, Pb and Sr) are efficient hosts for rare-earth dopants. In this work, high-aspect-ratio AWO 4 (A = Ba, Ca, Pb and Sr) nanofibers, doped with 5 mol.% Tb and 5 mol.% Eu on A site, were synthesized using a sol-gel electrospinning technique, and their performances as a ratiometric sensor for the detection of UV light wavelength were comparatively studied. High-resolution electron microscopy reveals the presence of nanosized grains composing the nanofibers. The AWO 4 :5Tb-5Eu nanofibers exhibit strong characteristic photoluminescence (PL) and cathodoluminescence (CL) emission from both Tb 3+ and Eu 3+ ions. In the case of CaWO 4 lattice, the emission intensity ratio of Tb 3+ /Eu 3+ is found to show a linear relationship with the excitation wavelength in the tested range of 240–330 nm, with efficient energy transfer from host lattice to rare-earth ions. However, a similar result is not observed in other scheelite structured BaWO 4 , PbWO 4 , and SrWO 4 nanofibers. Here, the unique PL emission characteristics of CaWO 4 :5Tb-5Eu under different UV excitation wavelengths are due to its unique excitation band. This study reveals a potential new application of CaWO 4 :5Tb-5Eu as a fluorescent probe for UV wavelength detection. Additionally, the CL intensities from CaWO 4 :5Tb-5Eu nanofibers exhibit highly linear dependences on the applied voltage and current without saturation, which can be utilized for radiation detection.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hybrid model to evaluate the frequency-dependent leakage inductance of partially-filled transformers

The leakage inductance of a transformer designed for a power electronic converter can drop significantly as the switching frequency is increased due to skin and proximity effects. Although the magnetic image method-based double-2-D model can predict the low-frequency leakage inductance of a partially-filled transformer with sufficient accuracy, it is inherently a frequency-independent model. While Dowell’s 1-D model uses frequency-dependent relations to account for both skin and proximity effects, its accuracy is severely affected by the assumed winding geometry. In this paper, a semianalytical hybrid model is proposed that uses superposition to combine a modified Dowell’s model with the double-2-D model to predict the true leakage inductance of partially-filled transformers at any given frequency. All three conductor types—round, foil, and litz wire—are modeled and analyzed. The quasi-2-D model is further investigated on a variable inductance transformer (VIT) whose winding geometry can be modified mechanically to vary its leakage inductance. With less than 5 % error throughout, the semi-analytically evaluated leakage inductances are in excellent agreement with the finite element method (FEM) simulated and experimentally measured leakage inductances.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Bayesian learning with Gaussian processes for low-dimensional representations of time-dependent nonlinear systems

This work presents a data-driven method for learning low-dimensional time-dependent physics-based surrogate models whose predictions are endowed with uncertainty estimates. We use the operator inference approach to model reduction that poses the problem of learning low-dimensional model terms as a regression of state space data and corresponding time derivatives by minimizing the residual of reduced system equations. Standard operator inference models perform well with accurate training data that are dense in time, but producing stable and accurate models when the state data are noisy and/or sparse in time remains a challenge. Another challenge is the lack of uncertainty estimation for the predictions from the operator inference models. Our approach addresses these challenges by incorporating Gaussian process surrogates into the operator inference framework to (1) probabilistically describe uncertainties in the state predictions and (2) procure analytical time derivative estimates with quantified uncertainties. The formulation leads to a generalized least-squares regression and, ultimately, reduced-order models that are described probabilistically with a closed-form expression for the posterior distribution of the operators. The resulting probabilistic surrogate model propagates uncertainties from the observed state data to reduced-order predictions. Furthermore, we demonstrate the method is effective for constructing low-dimensional models of two nonlinear partial differential equations representing a compressible flow and a nonlinear diffusion–reaction process, as well as for estimating the parameters of a low-dimensional system of nonlinear ordinary differential equations representing compartmental models in epidemiology.

Data-driven model reduction↗
DOE OSTI2023

New determination of the branching ratio of the structure dependent radiative K + → e + ν e γ

The branching ratio of the structure dependent (SD) radiative K + → e + ν e γ decay relative to that of the K + → e + ν e (γ) decay including the internal bremsstrahlung (IB) process (K e2 (γ) ) has been measured in the J-PARC E36 experiment using plastic scintillator/lead sandwich detectors, in contrast to the previous E36 measurement, which used a CsI(Tl) calorimeter. In the analysis, the effect of IB was also taken into account in the SD radiative decay as $K$$^{SD}_{e2γ(γ)}$. By combining the new data with the previous E36 result after revision for the IB correction for $K$$^{SD}_{e2γ(γ)}$, a new value Br($K$$^{SD}_{e2γ(γ)}$)/Br(Ke 2(γ) ) = 1.20 ± 0.07 has e2γ(γ) e2γ(γ) been determined. This is consistent with a recent lattice QCD calculation, but larger than the expectation of Chiral Perturbation Theory (ChPT) at order O(p 4 ) and the previous KLOE value. Using the method to relate form factor and branching ratio described in the KLOE paper, the present result is also consistent with the form factor prediction based on a gauged nonlocal chiral quark model, but larger than that from ChPT at order O(p 6 ).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Energy dependence of intermittency for charged hadrons in Au+Au collisions at RHIC

Density fluctuations near the QCD critical point can be probed via an intermittency analysis in relativistic heavy-ion collisions. We report the first measurement of intermittency in Au+Au collisions at $\sqrt{s{NN}}$ = 7.7-200 GeV measured by the STAR experiment at the Relativistic Heavy Ion Collider (RHIC). The scaled factorial moments of identified charged hadrons are analyzed at mid-rapidity and within the transverse momentum phase space. We observe a power-law behavior of scaled factorial moments in Au+Au collisions and a decrease in the extracted scaling exponent (ν) from peripheral to central collisions. The ν is consistent with a constant for different collisions energies in the mid-central (10-40%) collisions. Moreover, the ν in the 0-5% most central Au+Au collisions exhibits a non-monotonic energy dependence that reaches a minimum around $\sqrt{s{NN}}$ = 27 GeV. The physics implications on the QCD phase structure are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measurement of the radius dependence of charged-particle jet suppression in Pb–Pb collisions at $\sqrt{s_{NN}}=5.02$ TeV

The ALICE Collaboration reports a differential measurement of inclusive jet suppression using pp and Pb–Pb collision data at a center-of-mass energy per nucleon–nucleon collision $\sqrt{s_{NN}}=5.02$ TeV. Charged-particle jets are reconstructed using the anti-$k_T$ algorithm with resolution parameters R=0.2, 0.3, 0.4, 0.5, and 0.6 in pp collisions and R=0.2, 0.4, 0.6 in central (0–10%), semi-central (30–50%), and peripheral (60–80%) Pb–Pb collisions. A novel approach based on machine learning is employed to mitigate the influence of jet background. This enables measurements of inclusive jet suppression in new regions of phase space, including down to the lowest jet $p_T$ ≥ 40 GeV/c at R=0.6 in central Pb–Pb collisions. This is an important step for discriminating different models of jet quenching in the quark–gluon plasma. The transverse momentum spectra, nuclear modification factors, derived cross section, and nuclear modification factor ratios for different jet resolution parameters of charged-particle jets are presented and compared to model predictions. A mild dependence of the nuclear modification factor ratios on collision centrality and resolution parameter is observed. The results are compared to a variety of jet-quenching models with varying levels of agreement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Collision-energy dependence of deuteron cumulants and proton-deuteron correlations in Au+Au collisions at RHIC

We report the first measurements of cumulants, up to 4th order, of deuteron number distributions and proton-deuteron correlations in Au+Au collisions recorded by the STAR experiment in phase-I of Beam Energy Scan (BES) program at the Relativistic Heavy Ion Collider. Deuteron cumulants, their ratios, and proton-deuteron mixed cumulants are presented for different collision centralities covering a range of center-of-mass energy per nucleon pair $\sqrt{s_{NN}} = 7.7$ to 200 GeV. It is found that the cumulant ratios at lower collision energies favor a canonical ensemble over a grand canonical ensemble in thermal models. An anti-correlation between proton and deuteron multiplicity is observed across all collision energies and centralities, consistent with the expectation from global baryon number conservation. The UrQMD model coupled with a phase-space coalescence mechanism qualitatively reproduces the collision-energy dependence of cumulant ratios and proton-deuteron correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Simultaneous reweighting of Transverse Momentum Dependent distributions

The Bayesian reweighting procedure is extended to the case of multiple independent extractions of transverse momentum dependent parton distributions (TMDs). By exploiting the data on transverse single spin asymmetries, A N , for inclusive pion production in polarized proton-proton collisions measured at RHIC, we perform a simultaneous reweighting of the quark Sivers, transversity and Collins TMD functions extracted from semi-inclusive deep inelastic scattering (SIDIS) and annihilation into hadron pairs. The impact of the implementation of the Soffer bound, as well as the differences between older and newer e + e - data, are investigated. The agreement with A N data at large-x F values, a kinematical region complementary to those explored in SIDIS measurements, is enhanced, improving the knowledge of the polarized quark TMDs in the large-x region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Unveiling the sea: universality of the transverse momentum dependent quark distributions at small x

Within the Colour Glass Condensate effective theory, we demonstrate that back-to-back dijet correlations in dilute-dense collisions involving a small-quark from the nuclear target can be factorised in terms of universal transverse momentum dependent distributions (TMDs) for the sea quarks. Two building blocks are needed to construct all these TMDs at the operator level: the sea quark TMD operator which appears in semi-inclusive Deep-Inelastic Scattering (SIDIS) or in the Drell-Yan process and the elastic-matrix for a quark-antiquark dipole. Compared to SIDIS, the saturation effects are stronger for dijet production in forward proton-nucleus collisions, due to additional scattering in the initial and final state, effectively resulting in a larger value for the nuclear saturation momentum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

System-size dependence of charged-particle suppression in ultrarelativistic nucleus-nucleus collisions

High-energy partons lose energy while propagating through the hot, strongly interacting medium produced in ultrarelativistic nucleus-nucleus collisions, leading to a suppression of particle production at high transverse momentum (p T ). The dependence of this energy loss on the size of the colliding nuclear system has yet to be firmly established experimentally. This Letter presents a systematic study of charged-particle suppression across four different nucleus-nucleus collision systems using nuclear modification factors (R AA ) measured by the CMS Collaboration at the CERN LHC. Previous CMS measurements of R AA in oxygen-oxygen, xenon-xenon, and lead-lead collisions are recast with identical p T intervals and are complemented by the first measurement of the charged-particle R AA in neon-neon collisions at $\sqrt{S_{NN}}$ = 5.36 Te V . The neon-neon data correspond to an integrated luminosity of 0.76 nb −1 . The R AA in all collision systems examined show similar qualitative trends as a function of p T , but have a magnitude which is ordered with the nucleon number A. The R AA feature a downward slope at low p T , a local minimum at around 5–7 Ge V , and an upward slope with increasing p T . The R AA are also compared in terms of A 1/3 , which is proportional to the nuclear radius. Models including only initial-state nuclear effects fail to reproduce the observed trends, whereas energy loss models reproduce the trends in the region p T > 9.6 Ge V .

CMS↗
DOE OSTI2024

Probing O 2 -dependence of cyclopentyl reactions via isomer-resolved speciation

Modeling chemical kinetics relevant to low-temperature combustion requires complete description of reactions involving critical species such as hydroperoxyalkyl radicals, Q̇OOH, which undergo competing unimolecular reactions and bimolecular reactions with O 2 . The balance of flux across the two pathways affects rates of chain-branching and depends on temperature, pressure, and oxygen concentration. Accordingly, the influence of [O 2 ] on product formation from alkyl + O 2 reactions and the subsequent fate of Q̇OOH and related products is central to the development of an accurate chemical kinetics mechanism. Furthermore, chemical reactions consuming Q̇OOH-mediated species are often simplified to such a degree that mechanism truncation error (uncertainty derived from incomplete reaction networks) becomes significant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Alloying induces directionally-dependent mobility and alters migration mechanisms of faceted grain boundaries

Faceted grain boundaries exhibit unusual segregation and migration tendencies. To gain a deeper understanding of how solute atoms interact with faceted interfacial structures during migration, this study probes the migration behavior of a faceted Σ11 boundary in Cu doped with Ag atoms. Furthermore, the solutes are found to segregate to the facet with more free volume and strongly reduce boundary velocity in one migration direction, but not the other, due to the presence of a directionally-dependent motion mechanism that can escape solute pinning and therefore speed up migration. Hence, a new mechanism of chemically-induced anisotropy in grain boundary mobility is uncovered by these simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ectomycorrhizal effects on decomposition are highly dependent on fungal traits, climate, and litter properties: A model-based assessment

It has been proposed that competition between ectomycorrhizal (ECM) fungi and free-living saprotrophs for resources like nitrogen (N) slows decomposition and increases the soil carbon storage in ECM ecosystems compared to arbuscular (AM) ecosystems. However, empirical evidence for the generality of such ECM effects is equivocal, and confounding mechanisms have been proposed that affect the magnitude and direction of ECM effects on soil carbon. Here, for this work, we conduct a theoretical modeling experiment, where we explicitly incorporate mycorrhizal processes into the Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment (CORPSE) model. We use the model to explore the conditions under which ECM N acquisition processes can induce stronger saprotrophic N limitation and result in slower decomposition rates and greater soil organic carbon accumulation compared to AM processes. We found that the ECM fungi more strongly inhibited decomposition when litter inputs were N-depleted and relatively recalcitrant and when ECM fungi possessed a strong capacity to mine N from both recalcitrant soil organic matter and microbial necromass. Climate and seasonality also played a role as the ECM competition effect was strongest at low mean annual temperatures and when litterfall peaked seasonally. Priming effects driven by high root exudation rates in ECM-dominated systems could overwhelm the competition effect and reduce soil carbon under some circumstances. The ECM effect on decomposition in our simulations was highly context dependent. Based on our model results, we expect to see a strong ECM competition effect in temperate deciduous and boreal forests with relatively recalcitrant litter inputs, and with ECM fungi that produce oxidases and necromass-degrading enzymes. However, even a relatively strong ECM competition effect on decomposition only increased soil organic carbon accumulation by ~10%.

59 BASIC BIOLOGICAL SCIENCES↗