Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “correlation function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dynamic, symmetry-preserving, and hardware-adaptable circuits for quantum computing many-body states and correlators of the Anderson impurity model

We present a hardware-reconfigurable ansatz on N q -qubits for the variational preparation of many-body states of the Anderson impurity model (AIM) with N imp + N bath = N q /2 sites, which conserves total charge and spin z component within each variational search subspace. The many-body ground state of the AIM is determined as the minimum over all minima of O(N$^2_ q$) distinct charge-spin sectors. Hamiltonian expectation values are shown to require ω(N q ) < N meas. $\leqslant$ O(N imp N bath ) symmetry-preserving, parallelizable measurement circuits, each amenable to postselection. To obtain the one-particle impurity Green’s function we show how initial Krylov vectors can be computed via midcircuit measurement and how Lanczos iterations can be computed using the symmetry-preserving ansatz. For a single-impurity Anderson model with a number of bath sites increasing from one to seven, we show using numerical emulation that the ease of variational ground-state preparation is suggestive of linear scaling in circuit depth and subquartic scaling in optimizer complexity. We therefore expect that, combined with time-dependent methods for Green’s function computation, our ansatz provides a useful tool to account for electronic correlations on early fault-tolerant processors. Finally, with a view towards computing real materials properties of interest like magnetic susceptibilities and electron-hole propagators, we provide a straightforward method to compute many-body, time-dependent correlation functions using a combination of time evolution, midcircuit measurement-conditioned operations, and the Hadamard test.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A step in the direction of resolving the paradox of Perdew–Zunger self-interaction correction. II. Gauge consistency of the energy density at three levels of approximation

The Perdew-Zunger(PZ) self-interaction correction (SIC) was designed to correct the one-electron limit of any approximate density functional for the exchange-correlation (xc) energy, while yielding no correction to the exact functional. Unfortunately, it spoils the slowly-varying-in-space limits of the uncorrected approximate functionals, where those functionals are right by construction. The right limits can be restored by locally scaling down the energy density of the PZ SIC in many-electron regions, but then a spurious correction to the exact functional would be found unless the self-Hartree and exact self-xc terms of the PZ SIC energy density were expressed in the same gauge. Only the local density approximation satisfies the same-gauge condition for the energy density, which explains why the recent local-scaling SIC (LSIC) is found here to work excellently for atoms and molecules only with this basic approximation, and not with the more advanced generalized gradient approximations (GGAs) and meta-GGAs, which lose the Hartree gauge via simplifying integrations by parts. The transformation of energy density that achieves the Hartree gauge for the exact xc functional can also be applied to approximate functionals. Doing so leads to a simple scaled-down self-interaction (sdSIC) correction that is typically much more accurate than PZ SIC in tests for many molecular properties (including equilibrium bond lengths). The present work shows unambiguously that the largest errors of PZ SIC applied to standard functionals at three levels of approximation can be removed by restoring their correct slowlyvarying- density limits. Here, it also confirms the relevance of these limits to atoms and molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Projector-Free Capped-Fragment Scheme within Density Functional Embedding Theory for Covalent and Ionic Compounds

Quantum-mechanics-(QM)-based simulations now routinely aid in understanding and even discovering new chemistries involving molecules and materials exhibiting desired functionalities. Ab initio correlated wavefunction (CW) theories systematically improve QM methods, with many exhibiting high accuracy. However, execution of CW methods requires expensive computations that typically scale poorly with system size. Divide-and-conquer approaches partition large systems into smaller fragments; a lower level of theory treats fragment interactions while a preferred higher level of theory describes the important fragment. These methods offer ways to incorporate CWs into chemical simulations of large systems, e.g., biomolecules, surfaces, large inorganic clusters, bulk crystals, etc. Here we propose a partitioning protocol that utilizes capping atoms to saturate severed covalent bonds at fragment interfaces and density functional embedding theory (DFET) to describe fragment interactions. The capping groups in each fragment provide an ad-hoc potential that approximates the effects of the environment. An embedding potential optimized via DFET then serves as an augmentation of the capping group to simulate the effects of the environment. We concurrently use an auxiliary fragment (a separate system comprised of only the combined capping groups) to account for, and thereby correct, the electron density contributions of all the capping groups added to all of the fragments. This method depends only on the capped-subsystem and auxiliary-fragment electron densities, forgoing, as with the original DFET developed for metallic systems, orbital-based projector approaches that determine a nonlocal action of the embedding potential onto the fragment electrons. By using an auxiliary fragment, the method maintains a purely electron-density-dependent embedding potential, substantially lessening the cost and leading to simpler implementation. In this work, we demonstrate the utility of our capped-DFET and ensuing capped embedded CW method in two contrasting systems, namely, an organic molecule and an ionic metal oxide cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Guest-Host Interactions in Clathrate Hydrates: Benchmark MP2 and CCSD(T)/CBS Binding Energies of CH4, CO2 and H2S in (H2O)20 Cages

We present benchmark binding energies of naturally occurring gas molecules CH4, CO2, and H2S in the small cage, namely the pentagonal dodecahedron (512) (H2O)20, which is one of the constituent cages of the 3 major lattices (structures I, II and H) of clathrate hydrates. These weak interactions require higher levels of electron correlation and converge slowly with increasing basis set to the Complete Basis Set (CBS) limit, necessitating the use of large basis sets up to the augcc- pV5Z and subsequent correction for Basis Set Superposition Error (BSSE). For the host hollow (H2O)20 cages we have identified a most stable isomer with binding energy of -200.8 ± 2.1 kcal/mol at the CCSD(T)/CBS limit (-199.2 ± 0.5 kcal/mol at the MP2/CBS limit). Additionally, we report converged second order Moller-Plesset (MP2) CBS binding energies for the encapsulation of guests in the (H2O)20 cage of -4.3 ± 0.1 for CH4@(H2O)20, -6.6 ± 0.1 for CO2@(H2O)20 and -8.5 ± 0.1 kcal/mol for H2S@(H2O)20, respectively. For CH4@(H2O)20, exhibiting the weakest encapsulation affinity among the three, we report CCSD(T)/aug-cc-pVTZ binding energies and, based on them, a CCSD(T)/CBS estimate of -4.75 ± 0.1 kcal/mol. To the best of our knowledge, the CCSD(T)/aug-cc-pVTZ calculation for CH4@(H2O)20 is the largest one reported to date (168 valence electrons, 1978 basis functions and the correlation of 84 doubly occupied and 1873 virtual orbitals) and required a scalable implementation of the (T) module on 6144 nodes (350208 cores) of the “Cori” supercomputer at the National Energy Research Supercomputing Center (NERSC) for a total execution time of 195 minutes (for the (T) part). These efficient scalable implementations of highly correlated methods offer the capability to obtain long-lasting benchmarks of intermolecular interactions in complex systems. They also provide a path towards parametrizing classical potentials needed to study the dynamical and transport properties in these complex systems as well as assess the accuracy of lower scaling electronic structure methods such as Density Functional Theory (DFT) and MP2 including its spin-biased variants.

Heindel, Joseph↗
DOE OSTI2020

The carboxylation status of osteocalcin has important consequences for its structure and dynamics

The carboxylation status of Osteocalcin (Ocn) not only influences formation and structure in bones but also has important endocrine functions affecting energy metabolism and expenditure. In this study, the role of γ-carboxylation of the glutamate residues in the structure-dynamics-function relationship in Ocn is investigated. Three forms of Ocn, differentially carboxylated at the Glu-17, 21 and 24 residues, along with a mutated form of Ocn carrying Glu/Ala mutations, are modeled and simulated using molecular dynamics (MD) simulation in the presence of calcium ions. Characterization of the global conformational dynamics of Ocn, described in terms of the orientational variations within its 3-helical domain, highlights large structural variations in the non-carboxylated osteocalcin (nOcn). The bi-carboxylated Ocn (bOcn) and tri-carboxylated (tOcn) species, in contrast, display relatively rigid tertiary structures, with the dynamics of most regions strongly correlated. Radial distribution functions calculated for both bOcn and tOcn show long-range ordering of the calcium ion distribution around the carboxylated glutamate (γGlu) residues, likely playing an important role in promoting stability of these Ocns. Additionally, the same calcium ions are observed to coordinate with neighboring γGlu, better shielding their negative charges and in turn stabilizing these systems more than do the singly coordinating calcium ions observed in the case of nOcn. bOcn is also found to exhibit a more helical C-terminal structure, that has been shown to activate its cellular receptor GPRC6A, highlighting the allosteric role of Ocn carboxylation in modulating the stability and binding potential of the active C-terminal. Furthermore, the carboxylation status of Ocn as well and its calcium coordination appear to have a direct influence on Ocn structure and dynamics, possibly leading to the known differences in Ocn biological function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Fermi–Löwdin self-interaction correction for ionization energies of organic molecules

(Semi)-local density functional approximations (DFAs) suffer from self-interaction error (SIE). When the first ionization energy (IE) is computed as the negative of the highest occupied orbital (HO) eigenvalue, DFAs notoriously underestimate them compared to quasi-particle calculations. Here, the inaccuracy for the HO is attributed to SIE inherent in DFAs. We assessed the IE based on Perdew-Zunger self-interaction correction on 14 small to moderate-sized organic molecules relevant in organic electronics and polymer donor materials. Though self-interaction corrected DFAs were found to significantly improve the IE relative to the uncorrected DFAs, they overestimate. However, when the self-interaction correction is interiorly scaled using a function of the iso-orbital indicator zs , only the regions where SIE is significant get a correction. We discuss these approaches and show how these methods significantly improve the description of the HO eigenvalue for the organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The nature of the chemical bond and the role of non-dynamical and dynamical correlation in Be2

In the spin-coupled generalized valence bond (SCGVB) description of Be2, there is a pair of electrons in highly overlapping “inner” orbitals corresponding to a traditional σ bond, but this bond is compromised by Pauli repulsion arising from its overlap with a second “outer” pair. The presence of this outer pair of electrons leads to a repulsive potential energy curve at long range and a bound, but metastable molecule at short range. To obtain further insights into the nature of the bond in Be2, we determined the non-dynamical and dynamical correlation contributions to the potential energy curve of Be2 using four different choices for the zero-order wave function: Restricted Hartree–Fock (RHF), SCGVB, valence-CASSCF(4,4), and valence-CASSCF(4,8). The SCGVB and valence-CASSCF(4,4) wave functions yield similar breakdowns of the total correlation energy, with non-dynamical correlation being the more important contribution. For the RHF and valence-CASSCF(4,8) wave functions, dynamical correlation is critical, without which the potential energy curve is purely repulsive. High accuracy calculations on the HBen−1Be–BeBen−1H molecule as a function of n (n = 1–6) suggest that the intrinsic strength of a Be–Be σ bond uncompromised by Pauli repulsion is on the order of 62–63 kcal/mol, and its length is 2.13–2.14 Å, ∼60 kcal/mol stronger and ∼0.35 Å shorter than in Be2.

Xu, Lu. T. (ORCID:0000000182064902)↗
DOE OSTI2020

Correlated atomic dynamics in liquid seen in real space and time

In liquids, the timescales for structure, diffusion, and phonon are all similar, of the order of a pico-second. This not only makes characterization of liquid dynamics difficult but also renders it highly questionable to describe liquids in these terms. In particular, the current definition of the structure of liquids by the instantaneous structure may need to be expanded because the liquid structure is inherently dynamic. Here, we advocate describing the liquid structure through the distinct-part of the Van Hove function, which can be determined by inelastic neutron and x-ray scattering measurements as well as by simulation. It depicts the dynamic correlation between atoms in space and time, starting with the instantaneous correlation function at t = 0. The observed Van Hove functions show that the atomic dynamics is strongly correlated in some liquids, such as water. The effect of atomic correlation on various transport properties of fluid, including viscosity and diffusivity, is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Relaxation Dynamics and Ion Conduction of Poly(Ethylene Carbonate/Ethylene Oxide) Copolymer-Based Electrolytes

Poly(ethylene carbonate/ethylene oxide) P(EC/EO) copolymer was synthesized from EC monomer as a new matrix component of solid polymer electrolytes (SPEs), and the correlation between polymer dynamics and ionic conductivity in the P(EC/EO)-based SPEs at various lithium salt weight fractions (w Li ) was investigated by dielectric spectroscopy, rheology, and molecular dynamics (MD) simulations. With the addition of lithium salt, the molecular motions at various scales (i.e., from local to segmental and global motion scales) were found to change as follows: (i) the local motion of P(EC/EO) was slightly accelerated, and at w Li ≥ 0.22, it was separated into two relaxation modes, one faster and the other slower than that of P(EC/EO), (ii) the segmental motion of P(EC/EO) became significantly slower with the addition of lithium salt, and (iii) the global terminal relaxation became slightly slower with the increase of w Li . Thus, the motion of P(EC/EO) at various scales in SPEs changed with different trends with increasing lithium salt. It was also found that the temperature dependence of the ionic conductivity was described by a Vogel–Fulcher–Tammann-type function, which was correlated with the segmental motion, as is known in other SPE systems. Furthermore, from MD simulations, lithium ions are coordinated with the EC units more likely and with a closer distance than EO units in P(EC/EO), and the coordination number of oxygens around one lithium ion was estimated as 6–7 at the distance of 0.30 nm. Here, these results suggest that the coordination structure of the oxygens around the lithium ion is slightly disrupted due to the presence of EC units compared to the chelating structure of pure PEO electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thorium Monosilicide, ThSi: An Experimental and Theoretical Study

The present theoretical and experimental combination study investigates the ThSi molecule in detail. Computationally, we utilized high-level multireference and coupled-cluster levels of theory conjoined with large correlation consistent basis sets to study a series of electronic and spin–orbit states of ThSi. Here, we report potential energy curves (PECs), electron configurations at equilibrium distances, spectroscopic constants, energetics, and spin–orbit coupling effects for 16 electronic states of ThSi. The studied 16 electronic states are arranged tightly within 0.9 eV, highlighting the complexity of the electronic spectrum of ThSi. The ground electronic state of ThSi is a single-reference 1 1 Σ + state that derives from the 1σ 2 2σ 2 1π 4 electronic configuration. The Ω = 0 + spin–orbit ground state of ThSi is composed of 1 1 Σ + (47%) and 13Π (44%) electronic states. Our measured bond energy (D0) of ThSi, obtained using resonant two-photon ionization (R2PI) spectroscopy is 3.146(4) eV, where the assigned error limit is given in parentheses in units of the last quoted digits. The computed D0 of ThSi (Ω = 0 + ) at the CBS-C-CCSD(T)-δT(Q)-δDK-δSO level (3.181 eV) is in good agreement with the experimental value. Our derived enthalpy of formation for ThSi, Δ f H 0K o (ThSi(g)), is 971.8(6.0) kJ/mol. Finally, we have performed density functional theory (DFT) calculations for ThSi(1 1 Σ + ) using 16 exchange correlation functionals that span multiple rungs of “Jacob’s ladder” of density functional approximation (DFA) to assess the DFT errors on D 0 , r e , and ω e of ThSi with respect to experimental and ab initio coupled-cluster values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Benchmarking Density Functional Theory Methods for Efficient Calculations of a Strongly Correlated Li 1– x Ni 1– y O 2−δ System

Transition metal oxides (TMOs), such as LiNiO 2 , are promising candidates for energy storage and electronic devices due to their unique electronic properties, exceptional physical and chemical characteristics, and ability to adopt multiple oxidation states. However, accurately predicting their properties using mean-field density functional theory (DFT) is challenging due to the presence of strongly correlated d-electrons and the complex interplay between their structural, electronic, and magnetic responses. These challenges are further exacerbated by the need to model defects, surfaces, and interfaces, which require computationally efficient, large-scale simulations. To address these issues, we carry out a benchmark study on the Li 1–x NiO 2 system, evaluating the performance of several popular functionals. Our findings demonstrate that combining SCAN functional relaxation with single-step HSE calculations provides a practical and scalable computational strategy. This approach balances accuracy and efficiency, enabling high-throughput simulations of strongly correlated TMOs and improved predictive modeling capability of TMOs for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2021

The Role of Metal Substitution in Tuning Anion Redox in Sodium Metal Layered Oxides Revealed by X‐Ray Spectroscopy and Theory

Abstract We investigate high‐valent oxygen redox in the positive Na‐ion electrode P2‐Na 0.67− x [Fe 0.5 Mn 0.5 ]O 2 (NMF) where Fe is partially substituted with Cu (P2‐Na 0.67− x [Mn 0.66 Fe 0.20 Cu 0.14 ]O 2 , NMFC) or Ni (P2‐Na 0.67− x [Mn 0.65 Fe 0.20 Ni 0.15 ]O 2 , NMFN). From combined analysis of resonant inelastic X‐ray scattering and X‐ray near‐edge structure with electrochemical voltage hysteresis and X‐ray pair distribution function profiles, we correlate structural disorder with high‐valent oxygen redox and its improvement by Ni or Cu substitution. Density of states calculations elaborate considerable anionic redox in NMF and NMFC without the widely accepted requirement of an A‐O‐A′ local configuration in the pristine materials (where A=Na and A′=Li, Mg, vacancy, etc.). We also show that the Jahn–Teller nature of Fe 4+ and the stabilization mechanism of anionic redox could determine the extent of structural disorder in the materials. These findings shed light on the design principles in TM and anion redox for positive electrodes to improve the performance of Na‐ion batteries.

Abate, Iwnetim↗
DOE OSTI2021

The Role of Metal Substitution in Tuning Anion Redox in Sodium Metal Layered Oxides Revealed by X-Ray Spectroscopy and Theory

We investigate high-valent oxygen redox in the positive Na-ion electrode P2-Na 0.67-x [Fe 0.5 Mn 0.5 ]O 2 (NMF) where Fe is partially substituted with Cu (P2-Na 0.67-x [Mn 0.66 Fe 0.20 Cu 0.14 ]O 2 , NMFC) or Ni (P2-Na 0.67 -x[Mn 0.65 Fe 0.20 Ni 0.15 ]O 2 , NMFN). From combined analysis of resonant inelastic X-ray scattering and X-ray near-edge structure with electrochemical voltage hysteresis and X-ray pair distribution function profiles, we correlate structural disorder with high-valent oxygen redox and its improvement by Ni or Cu substitution. Density of states calculations elaborate considerable anionic redox in NMF and NMFC without the widely accepted requirement of an A-O-A' local configuration in the pristine materials (where A=Na and A'=Li, Mg, vacancy, etc.). We also show that the Jahn–Teller nature of Fe 4+ and the stabilization mechanism of anionic redox could determine the extent of structural disorder in the materials. These findings shed light on the design principles in TM and anion redox for positive electrodes to improve the performance of Na-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Relative phase stability of L1 2 and DO 22 /DO 23 structures in Al 3 Nb, Al 3 Zr and Al 3 V compounds

The relative stability of the different tri-aluminide (Al 3 M) phases in three binary systems (M = Zr, Nb and V) was assessed for their potential to form fine cubic L1 2 precipitates in additively manufactured alloys. Supersaturated thin films of Al-(8–30) at% M were sputtered and heat treated during in-situ x-ray diffraction (XRD) measurements to observe the temperature ranges of stability for each phase. As-sputtered films were then processed with laser tracks simulating additive manufacturing solidification conditions, and the formation of phases in the laser tracks was correlated with density functional theory (DFT) and nucleation rate calculations. We found that the metastable L1 2 structure is highly competitive with the stable DO 23 structure in the Al-Zr system, but much less stable than the DO 22 structure in the Al-Nb system, and both the DO 22 and Al 8 V 5 structure in the Al-V system. Furthermore, these experimental results were found to be in good agreement with the DFT and kinetic calculations, as we determined that the metastable L1 2 in Al-Zr only requires a small amount of undercooling to favor its nucleation over the stable DO 23 , suggesting additive manufacturing can be a viable pathway to develop Al-Zr alloys strengthened by a high volume fraction of L1 2 Al 3 Zr phase.

Perrin, Alice E. [Oak Ridge National Laboratory (O↗
DOE OSTI2022

S K-edge XAS of Cu Ⅱ , Cu Ⅰ , and Zn Ⅱ oxidized Dithiolene complexes: Covalent contributions to structure and the Jahn-Teller effect

We report reduced dithiolene ligands are bound to high valent Mo centers in the active site of the oxotransferase family of enzymes. Related model complexes have been studied with great insight by Prof. Holm and his colleagues. This study focuses on the other limit of dithiolene chemistry: an investigation of the 2-electron oxidized dithiolene bound to low-valent late transition metal (TM) ions (Zn II , Cu I , and Cu II ). The bonding descriptions of the oxidized dithiolene [N,N-dimethyl piperazine 2,3-dithione (Me 2 Dt 0 )] complexes are probed using S K-edge X-ray absorption spectroscopy (XAS) and the results are correlated to density functional theory (DFT) calculations. These experimentally supported calculations are then extended to explain the different geometric structures of the three complexes. The Zn II (Me 2 Dt 0 ) 2 complex has only ligand-ligand repulsion so it is stabilized at the D 2d symmetry limit. The Cu I (Me 2 Dt 0 ) 2 complex has additional weak backbonding thus distorts somewhat from D 2d toward D 2h symmetry. The Cu II (Me 2 Dt 0 ) 2 complex has a strong σ donor bond that leads to both a large Jahn-Teller stabilization to D 2h and an additional covalent contribution to the geometry. The combined strong stabilization results in the square planar, D 2h structure. This study quantifies the competition between the ligand-ligand repulsion and the change in electronic structures in determining the final geometric structures of the oxidized dithiolene complexes, and provides quantitative insights into the Jahn-Teller stabilization energy and its origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Systematic and statistical uncertainties of the hilbert-transform based high-precision FID frequency extraction method

Pulsed nuclear magnetic resonance (NMR) is widely used in high-precision magnetic field measurements. The absolute value of the magnetic field is determined from the precession frequency of nuclear magnetic moments. The Hilbert transform is widely used to extract the phase function from the observed free induction decay (FID) signal and then its frequency. In this paper, a detailed implementation of a Hilbert-transform based FID frequency extraction method is described. How artifacts and noise level in the FID signal affect the extracted phase function are derived analytically. A method of mitigating the artifacts in the extracted phase function of an FID is discussed. Correlations between noises of the phase function samples are studied for different noise spectra. We discovered that the error covariance matrix for the extracted phase function is nearly singular and improper for constructing the $\chi^2$ used in the fitting routine. A down-sampling method for fixing the singular covariance matrix has been developed, so that the minimum $\chi^2$-fit yields properly the statistical uncertainty of the extracted frequency. Other practical methods of obtaining the statistical uncertainty are also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Defective Sn-Zn perovskites through bio-directed routes for modulating CO 2 RR

Sn and Zn oxides can catalyze electrochemical CO 2 reduction reactions (CO 2 RR) to produce useful chemicals. Herein, we report on perovskite-type tin-zinc oxides (TZO) synthesized by a biomineralization approach under benign aqueous conditions. The resulting TZO catalysts are disordered and possess a high quantity of defects, which serve as highly reactive active sites in CO 2 RR. Selectively toward formate or CO is tunable toward the relative amounts of Sn and Zn and their associated O defects. In-situ X-ray absorption spectroscopy measurements reveal electronic and structural transformations consistent with oxygen vacancy formation at Sn-O-Zn bridges as a function of cathodic potential that strongly correlates to CO2RR selectivity. Further, Density functional theory (DFT) calculations demonstrate that introducing an oxygen vacancy in TZO influences drastically influences formate/CO selectivity, consistent with our in-situ XAS findings and catalytic performance. Overall, these findings demonstrate the potential of biomineralization to fabricate perovskite-type metal oxides for energy conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

STAR Highlights

In this overview talk, I have represented STAR to highlight the results of 19 parallels talks and 38 posters at this Quark Matter Conference. Overall, the contents have 8 major categories: 1. experimental measurements related to the BreitWheeler process and vacuum birefringence; 2. probes of initial states of heavy-ion collisions (parton distribution function and azimuthal correlations in small systems); 3. constraints on temperature-dependent viscosity (η/s(T)) with multiple flow harmonics and rapidity correlations; 4. hard probes using jet structures and heavy flavors; 5. exploration of the origin of global polarization and vorticity; 6. chiral and thermal properties of the QGP; 7. Beam Energy Scan (BES) and the critical point search; 8. upgrades and summary.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗