Results for “completely positive” — Page 60

NASA NTRS2004

ICESat Observations of Inland Surface Water Stage, Slope, and Extent: a New Method for Hydrologic Monitoring

River discharge and changes in lake, reservoir and wetland water storage are critical terms in the global surface water balance, yet they are poorly observed globally and the prospects for adequate observations from in-situ networks are poor (Alsdorf et al., 2003). The NASA-sponsored Surface Water Working Group has established a framework for advancing satellite observations of river discharge and water storage changes which focuses on obtaining measurements of water surface height (stage), slope, and extent. Satellite laser altimetry, which can achieve centimeter-level elevation precision for single, small laser footprints, provides a method to obtain these inland water parameters and contribute to global water balance monitoring. Since its launch in January, 2003 the Ice, Cloud, and land Elevation Satellite (ICESat), a NASA Earth Observing System mission, has achieved over 540 million laser pulse observations of ice sheet, ocean surface, land topography, and inland water elevations and cloud and aerosol height distributions. By recording the laser backscatter from 80 m diameter footprints spaced 175 m along track, ICESat acquires globally-distributed elevation profiles, using a 1064 nm laser altimeter channel, and cloud and aerosol profiles, using a 532 nm atmospheric lidar channel. The ICESat mission has demonstrated the following laser altimeter capabilities relevant to observations of inland water: (1) elevation measurements with a precision of 2 to 3 cm for flat surfaces, suitable for detecting river surface slopes along long river reaches or between multiple crossings of a meandering river channel, (2) from the laser backscatter waveform, detection of water surface elevations beneath vegetation canopies, suitable for measuring water stage in flooded forests, (3) single pulse absolute elevation accuracy of about 50 cm (1 sigma) for 1 degree sloped surfaces, with calibration work in progress indicating that a final accuracy of about 12 cm (1 sigma) will be achieved for clear atmosphere conditions, suitable for detection of stage changes through time, (4) ability to precisely point the spacecraft so as to position the laser profile on the Earth the surface with a cross-track accuracy of 50 m (1 sigma), enabling small water bodies and specific locations to be targeted and re-observed through time, (5) adequate signal levels from specular water surfaces up to 5 degrees off-nadir, enabling complete global access to any location on the Earth's surface from the ICESat repeat orbit by off-nadir pointing, and (6) day and night operation with successful laser ranging to the Earth's surface through thin to moderate cloud cover, enabling more frequent measurements than can be achieved by passive optical sensors. Here we illustrate these capabilities by showing ICESat observations through time for selected river and lake locations.

Harding, David J.↗

NASA NTRS1994

Solid Surface Wetting and the Deployment of Drops in Microgravity

The complete or partial deployment of liquid samples in low gravity is primarily influenced by the interfacial properties of the specific liquid and solid materials used because the overwhelming bias of Earth gravitational acceleration is removed. This study addresses the engineering aspects of injecting and deploying drops of prescribed volume into an acoustic positioning chamber in microgravity.

surface↗

DOE OSTI2025

Crystal structures of Salmonella enterica FraB deglycase reveal a conformational heterodimer with remarkable structural plasticity at the active site

Abstract Thefralocus ofSalmonella entericaencodes five genes for metabolism of fructose‐asparagine, an Amadori product formed by condensation of asparagine with glucose. In the last step of this pathway, the FraB deglycase cleaves 6‐phospho‐fructose‐aspartate into glucose‐6‐phosphate and aspartate. In homology models, FraB forms a homodimer with two equivalent active sites located at the dimer interface. E214 and H230, two invariant residues essential for catalysis, project into each active site cleft from opposing subunits of the dimer. Here, we have determined six crystal structures of FraB, three of a variant containing an N‐terminal His 6 tag and two mutations needed for crystallization (hereafter referred to as WT′), two with additional mutations to active site residues (E214A and P232A), and one of a variant with C‐terminal residues 313–325 deleted. Surprisingly, in the WT′ FraB structure, the two catalytic residues, E214 (general base) and H230 (general acid), are positioned ~22 Å apart. In the E214A and C‐terminus‐truncated FraB variants, however, a conformational change in the E214‐residing helix brings E214 and H230* to ~7 Å (* indicates residue from the second protomer that creates the inter‐subunit catalytic center). The loop bearing H230 also exhibits significant variation, ranging from being completely disordered to adopting open or closed states, with the nearby P232* residue being eithercisortrans. The C‐terminal residues 313–325 form a flexible “C‐tail” that can be fully disordered, bind in the active site to block access of substrate, or angle across the active site to wrap across the other subunit of the dimer and potentially close over substrate. Collectively, these structures reveal that FraB is a conformational heterodimer with two chemically identical subunits that are constrained to adopt different structures as they come together for catalysis. This plasticity likely involves correlated opening and closure of the two active sites for their respective binding and release of substrates and ligands.

Biochemistry & Molecular Biology↗

DOE OSTI2026

Open system approach to neutrinos propagating in an ultralight scalar background

We examine decoherence in neutrino oscillations induced by an ultralight scalar field coupled to neutrinos. The scalar induces time- and position-dependent shifts in the neutrino mass matrix. Neutrinos sample different field configurations throughout an experimental data-taking period, which leads to damping effects in the oscillation pattern in the form of decoherence. By recasting the neutrino-scalar dynamics within the open quantum systems framework, we establish a mapping between a complete model and phenomenological decoherence approaches. We find that the parameter driving decoherence scales as L 2 / E 2 , where L is the baseline and E is the neutrino energy, as opposed to L / E typically assumed in phenomenological studies of open system approaches to neutrino oscillations.

F.T. Airoldi, Lua [Sao Paulo U.; Fermilab] (ORCID:↗

DOE OSTI2024

Western Combined Heat and Power Technical Assistance Partnership (Final Technical Report)

Since 2018, the Western Combined Heat and Power Technical Assistance Partnership (CHP TAP) has been dedicated to advancing the adoption and implementation of Combined Heat and Power. The CHP TAP has diligently worked towards its mission of fostering end-user engagement, promoting technical solutions, and enhancing energy security within the region. As we reflect on our journey, we are proud to announce the completion of the required metrics set forth at the beginning of our endeavor. From the outset, our aim has been clear: to leverage CHP technology as a catalyst for bolstering American competitiveness, utilizing local fuels, and fortifying energy resilience. Through collaborative efforts with a diverse array of stakeholders, including manufacturing, commercial, institutional, and federal facilities, and campuses, we have strived to realize this vision. In this report, we outline the achievements, activities, and impact of the Western CHP TAP, highlighting the transformative journey undertaken since 2018. From providing technical assistance and guidance to conducting educational workshops and advocating for supportive policies, our initiatives have been guided by a commitment to excellence and innovation. As we celebrate the completion of our required metrics, we reaffirm our dedication to continuing our mission, building upon our accomplishments, and shaping a sustainable energy future for the Western region. Through ongoing collaboration and engagement, we are confident that the Western CHP TAP will continue to serve as a beacon of progress and a catalyst for positive change in the years to come.

03 NATURAL GAS↗

DOE OSTI2020

The Sealing Mechanisms of a Fracture in Opalinus Clay as Revealed by in situ Synchrotron X-Ray Micro-Tomography

The detailed mechanisms of the sealing of a single fracture, from hydration to almost complete closure by increase of confining pressure, as monitored from in situ synchrotron X-ray microtomography during the flow of carbonated water, is here shown for the first time. Different mechanisms play the key role at different stages in the evolution of the fracture. Hydration mechanically weakens the surfaces of the fracture and induces a first closure due to microcracking at the asperity contacts, increasing their size and creating choke points. Increase in confining stress promptly hydraulically seals the fracture by closing the main choke point, with a relative small deformation of the sample. Finally, the more pervasive mechanical deformation observed at higher stresses almost completely seals the whole fracture. The evolution of the sample has been described and quantified using 4D image processing, focusing on the evolution of aperture and digital volume correlation. Hydraulic properties of the sample at different stages have been modeled via Stokes flow simulation, and the results compared to the morphometric analysis, finding positive correlations with the average fracture aperture variation along the flowpath in function of confining pressure. Opalinus Clay is found to be a rock markedly prone to sealing in case of flow with carbonated water; this behavior is the result of the large fraction of clays and of its microstructure, lacking both cementing phases and large stiff particles. CO2 in this sample has no evident role in the evolution of the fracture; chemically induced weathering on the surface has not been detected, in contrast with the behavior observed in samples with carbonates as cementing phase.

58 GEOSCIENCES↗

NASA NTRS1994

Solid surface wetting and the deployment of drops in microgravity

The complete or partial deployment of liquid samples in low gravity is primarily influenced by the interfacial properties of the specific liquid and solid materials used because the overwhelming bias of the Earth gravitational acceleration is removed. This study addresses the engineering aspects of injecting and deploying drops of prescribed volume into an acoustic positioning chamber in microgravity. The specific problems of interest are the design, testing, and implementation of injector tips to be used in a simultaneously retracting dual-injector system in the Drop Physics Module microgravity experiment facility. Prior to release, the liquid to be deployed must be retained within a restricted area at the very end of the injectors under dynamic stimuli from the continuous injection flow as well as from the stepped motion of the injectors. The final released drop must have a well determined volume and negligible residual linear or angular momentum. The outcome of Earth-based short-duration low gravity experiments had been the selection of two types of injector tips which were flown as back-up parts. They were successfully utilized during the USML-1 Spacelab mission as the primary tips. The combination of a larger contact surface, liquid pinning with a sharp edge, and selective coating of strategic tip surfaces with a non-wetting compound has allowed a significant increase in the success rate of deployment of simple and compound drops of aqueous solutions of glycerol and silicone oil. The diameter of the samples studied in the Drop Physics Module range between 0.3 and 2.7 cm. The tests conducted on-orbit with a manually operated small device have allowed the calibration of the volume deployed for a few drop sizes. The design for improved tips to be used during the next USML flight is based on these results.

Trinh, E. H.↗

NASA NTRS1990

Flow Meter

Hedland Flow Meters manufactures a complete line of flow meters used in industrial operations to monitor the flow of oil, water or other liquids, air and other compressed gases, including caustics or corrosive liquids/gases. The company produces more than 1,000 types of flow meters featuring rugged construction, simplicity of installation and the ability to operate in any position.

Source record↗

NASA NTRS1994

Solid Surface Wetting and the Deployment of Drops in Microgravity

The complete or partial deployment of liquid samples in low gravity is primarily influenced by the interfacial properties of the specific liquid and solid materials used because the overwhelming bias of the Earth gravitational acceleration is removed. This study addresses the engineering aspects of injecting and deploying drops of prescribed volume into an acoustic positioning chamber in microgravity. The specific problems of interest are the design, testing, and implementation of injector tips to be used in a simuttaneously retracting dual-injector system used in the Drop Physics Module microgravity experiment facility. Prior to release, the liquid to be deployed must be retained within a restricted area at the very end of the injectors even under dynamic stimuli due to continuous injection flow as well as to the stepped motion of the injectors, and the final released drop must have a well determined volume as well as negligible residual linear or angular momentum from the deployment process. The outcome of Earthbased short-duration low gravity experiments had been the selection of two types of injector tips which were flown as back-up parts and were successfully utilized during the USML-1 Spacelab mission. The combination of a larger contact surface, liquid pinning with a sharp edge, and selective coating of strategic tip surfaces with a non-wetting compound has allowed a significant increase in the success rate of deployment of simple and compound drops of aqueous solutions of glycerol and silicone oil. The diameter of the samples studied in the Drop Physics Module ranged between 0.3 and 2.7 cm. The tests conducted onsrbit with a manually operated small device have allowed the calibration of the volume deployed for a few drop sizes. The design for improved tips to be used during the next USML flight is based on these results.

Trinh, E. H.↗

NASA NTRS2011

Mathematical Formalism for Designing Wide-Field X-Ray Telescopes: Mirror Nodal Positions and Detector Tilts

We provide a mathematical formalism for optimizing the mirror nodal positions along the optical axis and the tilt of a commonly employed detector configuration at the focus of a x-ray telescope consisting of nested mirror shells with known mirror surface prescriptions. We adopt the spatial resolution averaged over the field-of-view as the figure of merit M. A more complete description appears in our paper in these proceedings.

Elsner, R. F.↗

NASA NTRS2017

K2: Extending Kepler's Power to the Ecliptic-Ecliptic Plane Input Catalog

This document describes the Ecliptic Plane Input Catalog (EPIC) for the K2 mission (Howell et al. 2014). The primary purpose of this catalog is to provide positions and Kepler magnitudes for target management and aperture photometry. The Ecliptic Plane Input Catalog is hosted at MAST (http://archive.stsci.edu/k2/epic/search.php) and should be used for selecting targets when ever possible. The EPIC is updated for future K2 campaigns as their fields of view are finalized and the associated target management is completed. Table 0 summarizes the EPIC updates to date and the ID range for each. The main algorithms used to construct the EPIC are described in Sections 2 through 4. The details for individual campaigns are described in the subsequent sections, with the references listed in the last section. Further details can be found in Huber et al. (2016).

Huber, Daniel↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

behavioral health↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

countermeasure↗

DOE OSTI2020

Covariance Testing at BNL [Slides]

This presentation discusses testing implemented in FUDGE & ADVANCE in regard to proper ENDF formatting: STAN, STANEF, CHECKR, FUDGE, NJOY, convert to BOXR format, plotting, endfcovreport.py which is an overview of ENDF library’s covariance contents, and covariance Matrix class implements that are the core of all GNDS covariance. Several checks are performed, including symmetric, real, positive definite, condition # of Eigenvalues, and too big uncertainties. The presentation states that it can fix too big and/or small uncertainties and that it can plot matrices. It states that further testing is recommended by CSEWG but has not yet been implemented and suggests methods such as documentation which needs a human to execute, completeness which is partially complete, and reasonableness which has not been started. The presentation concludes by elaborating on reasonableness and states that only cross section is documented, that similar limits on CP reactions cross sections are needed, that maximum limits are needed too which is tricky since ENDF assumes Normal PDFs, and that there may be other observables.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1977

Active control of potential of the geosynchronous satellites ATS-5 and ATS-6

The ATS-6 geosynchronous satellite carries two cesium ion thrusters as part of the technology experiment package. Their effectiveness in controlling the spacecraft potential was shown during normal operation of the thrusters. Auroral particle detectors were used to estimate spacecraft potential, amount of cesium propellant backflow to the spacecraft, and electron signature of the thruster. Operation of the thruster clamps the spacecraft to about -10 v in the presence of a wide range of ambient particle flux. Some positive ions from the thruster are returned to the spacecraft during this period. The plasma bridge neutralizer of the thruster is also effective in controlling the spacecraft potential. Laboratory simulation tests of the ATS-5 ion thruster thermionic emitter neutralizer showed that negative differential charging on the spacecraft surface probably prevents the emitter from completely discharging the spacecraft in flight.

Goldstein, R.↗

NASA NTRS1986

Multichannel Fabry-Perot spectrometer for infrared astronomy

A multichannel design which makes use of the radiation normally rejected in a Fabry-Perot spectrometer is described, with application to infrared astronomy. The present optical design minimizes the diameters of the etalon and optics. The use of spherical mirrors ensures that no radiation is lost through the entrance aperture, and the beams can be completely collimated at the etalon. Laboratory studies demonstrate that the ability to employ eight channels increases by a factor of four the flux integrated during a given time period compared with that of a single-channel instrument. The spectrometer is nondispersive, and the source can be imaged at each of several output spectral positions.

Jennings, Donald E.↗

NASA NTRS1987

Qualification testing of General Electric 50 Ah nickel-cadmium cells with Pellon 2536 separator and passivated positive plates

Forty-two 50 Ah nickel-cadmium cells were delivered to the Goddard Space Flight Center (GSFC) by General Electric (GE) in February, 1985 for the purpose of evaluating and qualifying a nonwoven nylon separator material, Pellon 2536, and the GE positive plate nickel attack control gas passivation process. Testing began May, 1985 at the Naval Weapons Support Center (NWSC) in Crane, Indiana with GSFC standard initial evaluation tests. Life cycling in both Low Earth Orbit (LEO) and Geosynchronous Orbit (GEO) began in July, 1985 with approximately 6500 LEO cycles and three GEO eclipse seasons completed. After early problems in maintaining test pack temperature control, all packs are performing well but are exhibiting higher than normal charge voltage characteristics.

Morrow, George W.↗

NASA NTRS1988

On the universality of the two-point galaxy correlation function

The behavior of the two-point galaxy correlation function in volume-limited subsamples of three complete redshift surveys is investigated. The correlation length is shown to scale approximately as the square root of the distance limit in both the CfA and Southern Sky catalogs, but to be independent of the distance limit in the IRAS sample. This effect is found to be due to factors such as the large positive density fluctuations in the foreground of the optically selected catalogs biasing the correlation length estimate downward, and the brightest galaxies appearing to be more strongly clustered than the mean.

Davis, Marc↗