Results for “block design” — Page 60

NASA NTRS1973

Shuttle cryogenic supply system optimization study. Volume 2: Technical report, sections 4 through 9

The design and development of cryogenic supply systems for space shuttle vehicles are discussed. The weights, component counts, and statements of advantages and disadvantages of the systems considered are presented. Performance characteristics of the systems are analyzed in the form of graphs. Block diagrams and engineering drawings of the candidate systems are provided. Special consideration is given to flow rates and thermodynamic properties of the cryogenic systems.

Source record↗

NASA NTRS1992

Computation of the flow field in a centrifugal impeller with splitter blades

To support the design effort of the Space Transportation Main Engine (STME) Fuel Pump Stage, viscous flow calculations were performed in a centrifugal impeller with splitter blades. These calculations were carried out with a Navier-Stokes solver (MINT), which employs a linearized block-implicit Alternating Direction Implicit (ADI) procedure to iteratively solve a finite difference form of the system of conservation equations of mass, momentum, and energy in body-fitted coordinates. A computational grid was generated algebraically for the 'channel' between two main blades of the impeller and extended both upstream of the impeller inlet and downstream of the impeller exit so that the appropriate boundary conditions could be applied. The results of the calculations show that although the overall level of flow distortion near the impeller exit is not very large, there is a noticeable difference between the flow patterns in the two 'passages' (one passage between the pressure side of the splitter blade and the suction side of the next full blade).

Dejong, Frederik J.↗

NASA NTRS1992

A set-associative, fault-tolerant cache design

The design of a defect-tolerant control circuit for a set-associative cache memory is presented. The circuit maintains the stack ordering necessary for implementing the Least Recently Used (LRU) replacement algorithm. A discussion of programming techniques for bypassing defective blocks is included.

Lamet, Dan↗

NASA NTRS2005

Turbine Internal and Film Cooling Modeling For 3D Navier-Stokes Codes

The aim of this research project is to make use of NASA Glenn on-site computational facilities in order to develop, validate and apply aerodynamic, heat transfer, and turbine cooling models for use in advanced 3D Navier-Stokes Computational Fluid Dynamics (CFD) codes such as the Glenn-" code. Specific areas of effort include: Application of the Glenn-HT code to specific configurations made available under Turbine Based Combined Cycle (TBCC), and Ultra Efficient Engine Technology (UEET) projects. Validating the use of a multi-block code for the time accurate computation of the detailed flow and heat transfer of cooled turbine airfoils. The goal of the current research is to improve the predictive ability of the Glenn-HT code. This will enable one to design more efficient turbine components for both aviation and power generation. The models will be tested against specific configurations provided by NASA Glenn.

DeWitt, Kenneth↗

NASA NTRS2011

Base Flow Model Validation

A method was developed of obtaining propulsive base flow data in both hot and cold jet environments, at Mach numbers and altitude of relevance to NASA launcher designs. The base flow data was used to perform computational fluid dynamics (CFD) turbulence model assessments of base flow predictive capabilities in order to provide increased confidence in base thermal and pressure load predictions obtained from computational modeling efforts. Predictive CFD analyses were used in the design of the experiments, available propulsive models were used to reduce program costs and increase success, and a wind tunnel facility was used. The data obtained allowed assessment of CFD/turbulence models in a complex flow environment, working within a building-block procedure to validation, where cold, non-reacting test data was first used for validation, followed by more complex reacting base flow validation.

Sinha, Neeraj↗

NASA NTRS2012

Material Model Evaluation of a Composite Honeycomb Energy Absorber

A study was conducted to evaluate four different material models in predicting the dynamic crushing response of solid-element-based models of a composite honeycomb energy absorber, designated the Deployable Energy Absorber (DEA). Dynamic crush tests of three DEA components were simulated using the nonlinear, explicit transient dynamic code, LS-DYNA . In addition, a full-scale crash test of an MD-500 helicopter, retrofitted with DEA blocks, was simulated. The four material models used to represent the DEA included: *MAT_CRUSHABLE_FOAM (Mat 63), *MAT_HONEYCOMB (Mat 26), *MAT_SIMPLIFIED_RUBBER/FOAM (Mat 181), and *MAT_TRANSVERSELY_ANISOTROPIC_CRUSHABLE_FOAM (Mat 142). Test-analysis calibration metrics included simple percentage error comparisons of initial peak acceleration, sustained crush stress, and peak compaction acceleration of the DEA components. In addition, the Roadside Safety Verification and Validation Program (RSVVP) was used to assess similarities and differences between the experimental and analytical curves for the full-scale crash test.

Jackson, Karen E.↗

NASA NTRSDate not supplied

Analysis and Application of Novel and Heritage Acceleration Limiting Algorithms for SLS on Ascent

National Aeronautics and Space Administration (NASA) is currently building the Space Launch System (SLS) Block-1 launch vehicle, to be used as the crewed heavy-lift vehicle for the Artemis series of missions. The SLS Block-1 guidance subsystem utilizes a nonlinear algorithm derived from Shuttle heritage for limiting the vehicle’s induced maximum axial acceleration during ascent flight, known as g-limiting. Even though g-limiting has demonstrated stability and robustness through several design analysis cycles and the extensive Shuttle flight history, there are no available documents that demonstrate that this algorithm has been proven stable through conventional controls stability analysis. This paper highlights the non-linear nature of g-limit, presents an alternative methodology to employ a linear version of this algorithm, performs assessment of selected linear gains using classical stability analysis and, conducts a comparison of both approaches through Six Degrees-of-Freedom (6-DOF) Monte Carlo (MC) simulations.

Jason Everett↗

NASA NTRS2020

Developing and Implementing a Process to Verify and Validate the NASA InSight Mission’s Instrument Command Products

The NASA InSight Mars lander is a roboticspacecraft which is investigating the interior structure of Marsthrough a series of seismological measurements andexperiments. Much of the commanding of activities performedby the instruments was done using ‘blocks’ – reusable functionswritten in Virtual Machine Language stored onboard thespacecraft– and sequences (series of commands) that werecreated by teams to operate their instruments. It was vital thatthese blocks and sequences (collectively called commandproducts) be thoroughly examined prior to onboard executionusing a comprehensive test program to reduce risk to thespacecraft and instruments and ensure smooth operations onthe surface of Mars. The Verification and Validation (V&V)process that was designed and implemented during the monthsleading up to InSight’s launch and landing successfullyuncovered a number of issues that could have causedoperational delays or impacted hardware. The process alsohelped adapt ground tools to better model onboard activities,create operational principles to avoid unintended consequencesduring flight, and generate a reference database for commandproduct use during operations. This allowed InSight to meet itssurface operations goals in the desired timeframe. This paperdescribes the development, implementation and results ofInSight’s command product V&V process, its contribution tomission success, and challenges faced.

Cloutier, Kyle↗

NASA NTRSDate not supplied

Challenges in Scaling Analysis from Coupons to Elements in 3D Woven Composites for a Launch Vehicle End-Ring Structure

The limitations of structural design with 3D woven composites based on homogenized material models characterized using coupon test data, representative unit cell analysis, or a combination of the two are discussed in the context of a space launch system (SLS)-scale end ring. Selected building block test configurations at the coupon, element, and subcomponent scales are described in detail. Highly instrumented tests and X-ray computed tomography inspections are used to characterize the structural behavior and associated damage progression with increasing load. It is shown that a single homogenized material constitutive relationship, applied at coupon and element scale, is not sufficient to model the structural response observed in both tests. In fact, substantially different stress-strain laws are required to predict the response of the coupon and element scale specimens, despite similar loading conditions. A model with discrete representation of the binder tows and cohesive interfaces to model matrix cracking shows much better agreement with the test data at the two length scales. Thus, evidence is provided showing that predictive structural analysis of 3D woven composites requires discrete representation of the tows, matrix cracking morphology, and their interactions in the structural configuration. With accurate knowledge of the element scale behavior, engineering approximations readily enable analysis scale-up to the subcomponent level.

Andrew C Bergan↗

NASA NTRSDate not supplied

An Analytic Collaborative Framework for the Earth System Observatory

NASA's Earth System Observatory groundbreaking observations will provide critical measurements to address societal relevant problems in climate change, natural hazard mitigation, fighting forest fires, and improving real-time agricultural processes. Central to the ESO vision is the notion of Open-Source Science (OSS), a collaborative culture enabled by technology that promotes the open sharing of data, information, and knowledge aiming to facilitate and accelerate scientific understanding, and the agile development of applications for the benefit of society. The larger vision of an Earth System Digital Twin (ESDT) calls for integrated Earth science frameworks that mirror the Earth by a proxy digital construct that includes km-scale resolution Earth system models and data assimilation systems along with an integrated set of analytic tools to enable the next generation of science discoveries and evidence-based decision making. The goal of this project is to develop an Analytic Collaborative Framework for ESO missions, based on realistic, science-based observing system simulations and the Program of Record (PoR). Tying it all together is a cloud-based cyberinfrastructure that will enable each uniquely designed satellite in the Earth System Observatory to work in tandem to create a 3D, holistic view of Earth. In this presentation, we lay the technological groundwork for enabling such a vision. Our approach consists of the 3 main interconnected building blocks: 1. Cloud-optimized representative datasets for ESO missions and the PoR to serve as basis for developing and prototyping an Analytic Collaborative Framework. 2. An Algorithm Workbench for enabling experimentation and exploration of synergistic algorithms not only for instruments within a mission, but also including the PoR and other ESO missions. 3. A series of concrete Open-Source Science demonstrations including use cases that span science discovery and end-user applications with direct societal impact. While our ultimate goal is to include all of the main missions comprising the Earth System Observatory, in our initial 2 years we will focus on AOS and SBG, two missions for which specific synergisms have been identified in a recent workshop. In this presentation we will describe our approach and discuss some illustrative examples of our framework.

Arlindo da SIlva↗

NASA NTRSDate not supplied

An Analytic Collaborative Framework for the Earth System Observatory

NASA's Earth System Observatory groundbreaking observations will provide critical measurements to address societal relevant problems in climate change, natural hazard mitigation, fighting forest fires, and improving real-time agricultural processes. Central to the ESO vision is the notion of Open-Source Science (OSS), a collaborative culture enabled by technology that promotes the open sharing of data, information, and knowledge aiming to facilitate and accelerate scientific understanding, and the agile development of applications for the benefit of society. The larger vision of an Earth System Digital Twin (ESDT) calls for integrated Earth science frameworks that mirror the Earth by a proxy digital construct that includes km-scale resolution Earth system models and data assimilation systems along with an integrated set of analytic tools to enable the next generation of science discoveries and evidence-based decision making. The goal of this project is to develop an Analytic Collaborative Framework for ESO missions, based on realistic, science-based observing system simulations and the Program of Record (PoR). Tying it all together is a cloud-based cyberinfrastructure that will enable each uniquely designed satellite in the Earth System Observatory to work in tandem to create a 3D, holistic view of Earth. In this presentation, we lay the technological groundwork for enabling such a vision. Our approach consists of the 3 main interconnected building blocks: 1. Cloud-optimized representative datasets for ESO missions and the PoR to serve as basis for developing and prototyping an Analytic Collaborative Framework. 2. An Algorithm Workbench for enabling experimentation and exploration of synergistic algorithms not only for instruments within a mission, but also including the PoR and other ESO missions. 3. A series of concrete Open-Source Science demonstrations including use cases that span science discovery and end-user applications with direct societal impact. While our ultimate goal is to include all of the main missions comprising the Earth System Observatory, in our initial 2 years we will focus on AOS and SBG, two missions for which specific synergisms have been identified in a recent workshop. In this presentation we will describe our approach and discuss some illustrative examples of our framework.

Arlindo da SIlva↗

NASA NTRSDate not supplied

Space Launch System Block-1b USA Separation Analysis and Requirements Derivation From CLVTOPS Toolchain

Ensuring that rocket stage separation events provide positive clearance is critical to avoid loss of mission or crew. NASA's Marshall Space Flight Center (MSFC) has developed a cutting-edge toolchain to address this type of problem and it was used to set abstracted impulse requirements on, and to analyze the results of, the in-space separation event of the Universal Stage Adapter (USA) and the Exploration Upper Stage (EUS) of NASA's Space Launch System (SLS) Block-1B configuration. The toolchain is used as a hardware simulation to confirm positive body-to-body clearance during the separation event. It is also used to create a requirements-space simulation, which helps inform requirements as the hardware design matures.

Zachary T Muscha↗

NASA NTRSDate not supplied

SLS Block-1B USA Separation Analysis and Requirements Evaluation Using the CLVTOPS Toolchain

Ensuring that rocket stage separation events provide positive clearance is critical to avoid loss of mission or crew. NASA's Marshall Space Flight Center (MSFC) has developed a cutting-edge toolchain to address this type of problem and it was used to set abstracted impulse requirements on, and to analyze the results of, the in-space separation event of the Universal Stage Adapter (USA) and the Exploration Upper Stage (EUS) of NASA's Space Launch System (SLS) Block-1B configuration. The toolchain is used as a hardware simulation to confirm positive body-to-body clearance during the separation event. It is also used to create a requirements-space simulation, which helps inform requirements as the hardware design matures.

Zach Muscha↗

NASA NTRS1975

HAL/SM language specification

A programming language is presented for the flight software of the NASA Space Shuttle program. It is intended to satisfy virtually all of the flight software requirements of the space shuttle. To achieve this, it incorporates a wide range of features, including applications-oriented data types and organizations, real time control mechanisms, and constructs for systems programming tasks. It is a higher order language designed to allow programmers, analysts, and engineers to communicate with the computer in a form approximating natural mathematical expression. Parts of the English language are combined with standard notation to provide a tool that readily encourages programming without demanding computer hardware expertise. Block diagrams and flow charts are included. The semantics of the language is discussed.

Williams, G. P. W., Jr.↗

NASA NTRS1981

Magnetohydrodynamics MHD Engineering Test Facility ETF 200 MWe power plant. Conceptual Design Engineering Report CDER. Volume 3: Costs and schedules

The estimated plant capital cost for a coal fired 200 MWE electric generating plant with open cycle magnetohydrodynamics is divided into principal accounts based on Federal Energy Regulatory Commision account structure. Each principal account is defined and its estimated cost subdivided into identifiable and major equipment systems. The cost data sources for compiling the estimates, cost parameters, allotments, assumptions, and contingencies, are discussed. Uncertainties associated with developing the costs are quantified to show the confidence level acquired. Guidelines established in preparing the estimated costs are included. Based on an overall milestone schedule related to conventional power plant scheduling experience and starting procurement of MHD components during the preliminary design phase there is a 6 1/2-year construction period. The duration of the project from start to commercial operation is 79 months. The engineering phase of the project is 4 1/2 years; the construction duration following the start of the man power block is 37 months.

Source record↗

NASA NTRS1985

Six mechanisms used on the SSM/1 radiometer

Future USAF Block 5D Defense Meteorological Satellites will carry a scanning microwave radiometer sensor (SSM/1). SSM/1 senses the emission of microwave energy and returns to earth data used to determine weather conditions, such as rainfall rates, soil moisture, and oceanic wind speed. The overall design of the SSM/1 radiometer was largely influenced by the mechanisms. The radiometer was designed to be stowed in a cavity on the existing spacecraft. The deployment of the sensor is complex due to the constraint of this cavity and the need for precision in the deployment. The radiometer will continuously rotate, instead of oscillate, creating the need for a bearing and power transfer assembly and a momentum compensation device. The six mechanisms developed for this program are described.

Ludwig, H. R.↗

NASA NTRS1986

Advanced information processing system - Status report

The Advanced Information Processing System (AIPS) is designed to provide a fault tolerant and damage tolerant data processing architecture for a broad range of aerospace vehicles. The AIPS architecture also has attributes to enhance system effectiveness such as graceful degradation, growth and change tolerance, integrability, etc. Two key building blocks being developed by the AIPS program are a fault and damage tolerant processor and communication network. A proof-of-concept system is now being built and will be tested to demonstrate the validity and performance of the AIPS concepts.

Brock, L. D.↗

NASA NTRS1989

Improved Si:As BIBIB (Back-Illuminated Blocked-Impurity-Band) hybrid arrays

Results of a program to increase the short wavelength (less than 10 microns) detective quantum efficiency, eta/beta, of Si:As Impurity Band Conduction arrays are presented. The arrays are epitaxially grown Back-Illuminated Blocked (BIB) Impurity-Band (BIBIB) 10x50 detectors bonded to switched-FET multiplexers. It is shown that the 4.7 microns detective quantum efficiency increases proportionately with the thickness of the infrared active layer. A BIB array with a thick active layer, designed for low dark current, exhibits eta/beta = 7 to 9 percent at 4.7 microns for applied bias voltages between 3 and 5 V. The product of quantum efficiency and photoelectric gain, etaG, increases from 0.3 to 2.5 as the voltage increases from 3 to 5 V. Over this voltage range, the dark current increases from 8 to 120 e(-)s(-1) at a device temperature of 4.2 K and is under 70 e(-)s(-1) for all voltages at 2 K. Because of device gain, the effective dark current (equivalent photon rate) is less than 3 e(-)s(-1) under all operating conditions. The effective read noise (equivalent photon noise) is found to be less than 12 electrons under all operating conditions and for integration times between 0.05 and 100 seconds.

Herter, T.↗