Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “beta”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Pressureless sintered Sialons with low amounts of sintering aid

Two Beta prime - Sialons of composition Si2.6Al0.393y0.007O0.4N3.6 and Si2.6Al0.384Y0.014O0.4N3.6 were pressureless sintered from mixtures of Y2O3 and separately milled Beta -Si3N4, AlN, and SiO2. These Sialons had densities of over 98% of theoretical, four-point bend strengths of 460 and 155 MPa at room temperature and 1400 C, respectively, and 1400 C oxidation rates lower than those reported for hot pressed Si3N4 and for a stronger Sialon with 2.5 weight percentage Y2O3.

Arias, A.↗
NASA NTRS1977

Geologic interpretation of new observations of the surface of Venus

New radar observations of the surface of Venus provide further evidence of a diverse and complex geologic evolution. The radar bright feature 'Beta' (24 deg N, 85 deg W) is seen to be a 700 km diameter region elevated a maximum of approximately 10 km relative to its surroundings with a 60 x 90 km wide depression at its summit. 'Beta' is interpreted to be a large volcanic construct, analogous to terrestrial and Martian shield volcanoes. Two large, quasi-circular areas of low reflectivity, examples of a class of features interpreted to be impact basins by previous investigators who were without the benefit of actual topographic information, are shown in altimetry maps to be depressions. Thus the term 'basin' can be applied, although we urge a non-genetic usage until more complete understanding of their origin is achieved through analysis of future observations.

Saunders, R. S.↗
NASA NTRS1978

Ultraviolet photometry from the Orbiting Astronomical Observatory. XXVIII - Ultraviolet light curves for Alpha Lupi and BW Vulpeculae

Photometric data from the Wisconsin Experiment Package on OAO-2 have been used to construct light curves at three ultraviolet wavelengths for Alpha Lup and at seven wavelengths for BW Vul. Both stars are well-known variables of the Beta Cephei (Beta Canis Majoris) type. The light curves for Alpha Lup are in good agreement with the radial-velocity period. A temperature variation of 400-500 K is derived. The BW Vul light curves confirm recent ephemerides based on a secularly varying period and show a stillstand near light maximum at some wavelengths. Both stars exhibit increasing light amplitude at the shortest ultraviolet wavelengths. There is little evidence for cycle-to-cycle variations on a time scale of the order of 1 day.

Lesh, J. R.↗
NASA NTRS1978

Mg II h and k emission from luminous M stars

Mg II h and k emission lines of the M2 giant beta Peg and the M5 supergiant alpha Her were detected in Copernicus observations. In the alpha Her profiles, similar to alpha Ori and alpha Sco profiles, the k line is asymmetric and the h line is symmetric. The possibility that the k line asymmetry is produced by overlying absorption is discussed. In beta Peg, both h and k lines are asymmetric, and line formation in an expanding chromosphere is indicated. The observations are in accord with one formulation of the Wilson-Bappu relation but deviate from another form of the Wilson-Bappu relation.

Bernat, A. P.↗
NASA NTRS1978

Optimal estimation for discrete time jump processes

Optimum estimates of nonobservable random variables or random processes which influence the rate functions of a discrete time jump process (DTJP) are derived. The approach used is based on the a posteriori probability of a nonobservable event expressed in terms of the a priori probability of that event and of the sample function probability of the DTJP. Thus a general representation is obtained for optimum estimates, and recursive equations are derived for minimum mean-squared error (MMSE) estimates. In general, MMSE estimates are nonlinear functions of the observations. The problem is considered of estimating the rate of a DTJP when the rate is a random variable with a beta probability density function and the jump amplitudes are binomially distributed. It is shown that the MMSE estimates are linear. The class of beta density functions is rather rich and explains why there are insignificant differences between optimum unconstrained and linear MMSE estimates in a variety of problems.

Vaca, M. V.↗
NASA NTRS1978

Extreme-ultraviolet observations of nearby B stars - Constraints on hot circumstellar plasma

The extreme-ultraviolet telescope on the Apollo-Soyuz Test Project Mission observed several nearby stars of spectral type earlier than B3 in search of thermal emission from possible hot circumstellar plasma. The stars studied in the 45-185 and 114-185 A passbands of the instrument included Lambda Sco, Nu Sco, Beta CMa, Beta Cen, Sigma Sgr, and Alpha Pav. Diffuse emission around these stars in excess of about 1 billionth erg/sq cm/sec per sr/eV in the 45-185 A band and about 1 hundred-millionth erg/sq cm/sec per sr/eV in the 114-185 A band was not detected. The experimental data have been used to place upper limits on the emission measure of the plasma and the stellar-wind luminosity, using standard models. The data rule out the existence of sizable bubbles of hot plasma around any of the stars surveyed. In all cases the electron density in these regions, if they exist, may not exceed about 0.2 electron/cu cm.

Paresce, F.↗
NASA NTRS1978

Further measurements and reassessment of the magnetic-monopole candidate

The data on the 1975 Lexan event are reexamined in a framework that does not depend on the details of a particular track model. Instead, visual measurements of two quantities, photographic evidence, and silver-grain densities measured with an automated microscopic-image dissector are cited. It is shown that throughout the detector stack the particle had a roughly constant value of absolute Z/beta of about 109-114 based on energy deposition at radial distance less than about 0.01 micron. Its energy deposition at radial distance greater than about 20 microns was incompatible with that expected from any known cosmic ray nucleus with Z/beta in this range. A monopole is ruled out, and the three candidates compatible with the data are: (1) a slow, supermassive particle with beta about 0.4, charge about 45e, and mass above 1000-10,000 amu; (2) a fast antinucleus with Z/beta about -109 to -114 and absolute Z between 76 and 96; and (3) a very fast nucleus with Z about 110-114 and beta above about 0.99.

Price, P. B.↗
NASA NTRS1978

Reaction diffusion in the NiCrAl and CoCrAl systems

The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

Levine, S. R.↗
NASA NTRS1978

Evaluation of directionally solidified eutectic superalloys for turbine blade applications

Alloys from the following systems were selected for property evaluation: (1) gamma/gamma-Mo (Ni-base, rods of Mo); (2) gamma-beta (Ni-base, lamellae or rods of (Ni, Fe/Co Al); and (3) gamma-gamma (Ni-base rods of Ni3Al gamma). The three alloys were subjected to longitudinal and transverse tensile and rupture tests from 750 C to 1100 C, longitudinal shear strength was measured at several temperatures, resistance to thermal cycling to 1150 C was determined, cyclic oxidation resistance was evaluated at 750 C and 1100 C, and each system was directionally solidified in an alumina shell mold turbine shape to evaluate mold/metal reactivity. The gamma/gamma Mo system has good rupture resistance, transverse properties and processability, and is a high potential system for turbine blades. The gamma-beta system has good physical properties and oxidation resistance, and is a potential system for turbine vanes. The gamma-gamma system has good high temperature rupture resistance and requires further exploratory research.

Henry, M. E.↗
NASA NTRS1978

Development and Evaluation of Die Materials for Use in the Growth of Silicon Ribbons by the Inverted Ribbon Growth Process. Task 2: LSSA Project

Several ribbon growth experiments were performed from V-shaped dies coated with CVD Si3N4. The most significant result was the ability to perform five consecutive growth runs from the same die without mechanical degradation of the die through temperature cycling. The die was made from vitreous carbon coated with CVD Si3N4. Silicon oxynitride, Si2N2O, was examined with respect to thermal stability in contact with molten silicon. The results of X-ray analysis indicate that this material is converted to both alpha - and beta-Si3N4 in the presence of molten silicon. Experiments on the stability of CVD SiOxNy shoe that this material can be maintained in contact with molten silicon (sessile drop test) for greater than 30 h at 1450 C without total decompositon. These layers are converted mainly to beta-Si3N4.

Duffy, M. T.↗
NASA NTRS1979

The hydrogen lines in the high-luminosity quasar B2 1225+31

The emission lines H-alpha, H-beta + forbidden O III, and L-alpha have been observed in the high-redshift quasar 1225+31. The ratios of line intensities in 1225+31 are found to be approximately 0.8 for L-alpha/H-alpha, about 4 for H-alpha/(H-beta + forbidden O III), and between 4 and 10 for H-alpha/H-beta. The observed value of L-alpha/H-alpha agrees well with the ratio derived by Baldwin (1977) on the basis of a composite quasar spectrum, as well as with direct determination of this ratio in 3C 273 and PKS 0237-23. The ratio H-alpha/H-beta is in the range of values found for a sample of low-redshift quasars by Baldwin (1975). The low value for the L-alpha/H-alpha ratio cannot be reasonably explained by foreground extinction between the sun and 1225+31.

Soifer, B. T.↗
NASA NTRS1979

The influence of microstructure on the strength of reaction bonded silicon nitride /RBSN/

The effect of the microstructure of reaction bonded silicon nitride on strength is examined. The morphologies of the various microconstituents (alpha-matte, beta-spikes, residual silicon and porosity) each play a role in determining the strength of the material. While density and hence percent porosity greatly affect strength, it is shown that the pore size and pore size distribution affect strength with equal importance. By minimizing the pore size and distribution and maximizing the alpha-beta ratio, a reaction bonded material (2.4 kg/cu m) has been produced with a room temperature modulus of rupture (three-point bending) of 297 MPa from a low green density starting material (1.5 kg/cu m).

Danforth, S. C.↗
NASA NTRS1978

Selective photodestruction of alpha-amino acids

A problem encountered in the analysis of amino acids in chemical evolution experiments and in extracts of meteorites is the large number present. A method for selectively destroying the alpha-amino acids, with only the beta- and gamma-amino acids remaining in the solution, is described. The amino acids used were racemic, with one milliliter of solution containing 0.0000025 mol of each acid irradiated in a 1-cm quartz cell having 254-nm monochromatic light in the presence of CuCl2. Excess H2S was added to precipitate the Cu (2+) as CuS. A gas chromatographic analysis was used to observe that irradiation with 254-nm light in the presence of Cu (2+) destroyed all the amino acids except the beta and the gamma types. It is concluded that with such a procedure, complex mixtures of amino acids can be simplified to make identification by GC mass spectrometry easier.

Levi, N.↗
NASA NTRS1978

High pressure phase transitions in tetrahedrally coordinated semiconducting compounds

New experimental results are reported for structural transitions at high pressure in several III-V compounds and two II-VI compounds. These data, together with earlier results, are then compared with the predictions of model calculations of Van Vechten. Experimental transition pressures are often at variance with calculated values. However, his calculation assumes that the high pressure phase is metallic, with the beta-Sn structure. The present results show that several compounds assume an ionic NaCl structure at high pressure, while others have neither the beta-Sn nor NaCl structure.

Yu, S. C.↗
NASA NTRS1979

Interfacial geometry and D-variation effects in two-phase systems

Numerical solutions of the governing diffusion equation for two-phase concentration dependent diffusion coefficients are examined. Solutions were also calculated for planar, cylindrical, and spherical geometries to compare the effect of interface geometries with those caused by concentration-dependent diffusion coefficients, and two methods of averaging D were considered to determine the best averaging method for different types of D-variations. The effects of interface-location criteria on mass conservation and convergence of interface location, diffusion coefficient variation in the alpha and beta-phases of a two-phase binary alloy system, effect of D(alpha) variation in a cylindrical couple on beta-phase thickness, and geometry and D-variation effects on the degree of homogenization were determined. It is concluded that typical D(alpha)-variations can have a greater influence on the kinetics of interdiffusion than the geometry.

Tenney, D. R.↗
NASA NTRS1978

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 1: Executive summary

The feasibility of the commercial manufacturing of pharmaceuticals in space is examined. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is presented. Antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon were studied. Production mass balances for antihemophilic factor, beta cells, and erythropoietin were compared for space verus ground operation.

Source record↗
NASA NTRS1978

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 2: Technical analysis

A technical analysis on the feasibility of commercial manufacturing of pharmaceuticals in space is presented. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is described. The candidate products are antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon. Production mass balances for antihemophelic factor, beta cells, and erythropoietin were compared for space versus ground operation. A conceptual description of a multiproduct processing system for space operation is discussed. Production requirements for epidermal growth factor of alpha-1-antitrypsin and interferon are presented.

Source record↗
NASA NTRS1979

The dielectric properties of soil-water mixtures at microwave frequencies

Recent measurements on the dielectric constants of soil-water mixtures show the existence of two frequency regions in which the dielectric behavior of these mixtures was quite different. At the frequencies of 1.4 GHz to 5 GHz, there were strong evidences that the variations of the dielectric (epsilon) with water content (W) depended on soil type. While the real part of epsilon for sandy soils rose rapidly with the increase in W, epsilon for the high-clay content soils rose only slowly with W. As a consequence, epsilon was generally higher for the sandy soils than for the high-clay content soils at a given W. On the other hand, most of the measurements at frequencies 1 GHz indicated the increase of epsilon with W independent of soil types. At a given W, epsilon' (sandy soil) approximately equals epsilon (high-clay content soil) within the precision of the measurements. These observational features can be satisfactorily interpreted in terms of a simple dielectric relaxation model, with an appropriate choice of the mean relaxation frequency f(m) and the range of the activation energy (beta). It was found that smaller f(m) and larger beta were required for the high-clay content soils than the sandy soils in order to be consistent with the measured data.

Wang, J. R.↗