Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “barriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Collisions induced by halo and weakly bound nuclei around the Coulomb barrier: Results at INFN-LNS Catania

The study of collisions around the Coulomb barrier induced by halo and/or weakly bound nuclei has been the object of many publications in the last years, since the peculiar structure of such nuclei can strongly affect the reaction dynamics. In this paper we will summarize some results on the above topic obtained by our group at INFN-LNS Catania. Results concerning the study of elastic scattering and different reaction mechanisms in collisions induced by the halo nuclei {sup 11}Be and {sup 6}He and by the weakly bound stable nuclei {sup 6,7}Li on a {sup 64}Zn target, at energies around the Coulomb barrier, will be presented. The conclusions of our studies will be compared with the ones of other authors, in order to show if clear systematic conclusions can be drawn from the different papers published in the literature so far.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

{sup 12}C+{sup 16}O: Properties of sub-barrier resonance {gamma}-decay

In a recent experiment performed at Triumf using the Dragon 0 Degree-Sign spectrometer and its associated BGO array, the complete {gamma}-decay of the radiative capture channel below the Coulomb barrier has been measured for the first time. This measurement has been performed at two energies E{sub c.m.}= 6.6 and 7.2 MeV. A selective contribution of the entrance spins 2{sup +} and 3{sup -} has been evidenced which is consistent with existing results above the barrier.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Homogeneous pinhole free 1 nm Al{sub 2}O{sub 3} tunnel barriers on graphene

We report on the topographical and electrical characterisations of 1 nm thick Al{sub 2}O{sub 3} dielectric films on graphene. The Al{sub 2}O{sub 3} is grown by sputtering a 0.6 nm Al layer on graphene and subsequentially oxidizing it in an O{sub 2} atmosphere. The Al{sub 2}O{sub 3} layer presents no pinholes and is homogeneous enough to act as a tunnel barrier. A resistance-area product in the mega-ohm micrometer-square range is found. Comparatively, the growth of Al{sub 2}O{sub 3} by evaporation does not lead to well-wetted films on graphene. Application of this high quality sputtered tunnel barrier to efficient spin injection in graphene is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The simplest equivalent circuit of a pulsed dielectric barrier discharge and the determination of the gas gap charge transfer

The concept of the simplest equivalent circuit for a dielectric barrier discharge (DBD) is critically reviewed. It is shown that the approach is consistent with experimental data measured either in large-scale sinusoidal-voltage driven or miniature pulse-voltage driven DBDs. An expression for the charge transferred through the gas gap q(t) is obtained with an accurate account for the displacement current and the values of DBD reactor capacitance. This enables (i) the significant reduction of experimental error in the determination of q(t) in pulsed DBDs, (ii) the verification of the classical electrical theory of ozonizers about maximal transferred charge q{sub max}, and (iii) the development of a graphical method for the determination of q{sub max} from charge-voltage characteristics (Q-V plots, often referred as Lissajous figures) measured under pulsed excitation. The method of graphical presentation of q{sub max} is demonstrated with an example of a Q-V plot measured under pulsed excitation. The relations between the discharge current j{sub R}(t), the transferred charge q(t), and the measurable parameters are presented in new forms, which enable the qualitative interpretation of the measured current and voltage waveforms without the knowledge about the value of the dielectric barrier capacitance C{sub d}. Whereas for quantitative evaluation of electrical measurements, the accurate estimation of the C{sub d} is important.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First observation of a new zonal-flow cycle state in the H-mode transport barrier of the experimental advanced superconducting Tokamak

A new turbulence-flow cycle state has been discovered after the formation of a transport barrier in the H-mode plasma edge during a quiescent phase on the EAST superconducting tokamak. Zonal-flow modulation of high-frequency-broadband (0.05-1 MHz) turbulence was observed in the steep-gradient region leading to intermittent transport events across the edge transport barrier. Good confinement (H{sub 98y,2} {approx} 1) has been achieved in this state, even with input heating power near the L-H transition threshold. A novel model based on predator-prey interaction between turbulence and zonal flows reproduced this state well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron current extraction from radio frequency excited micro-dielectric barrier discharges

Micro dielectric barrier discharges (mDBDs) consist of micro-plasma devices (10-100 {mu}m diameter) in which the electrodes are fully or partially covered by dielectrics, and often operate at atmospheric pressure driven with radio frequency (rf) waveforms. In certain applications, it may be desirable to extract electron current out of the mDBD plasma, which necessitates a third electrode. As a result, the physical structure of the m-DBD and the electron emitting properties of its materials are important to its operation. In this paper, results from a two-dimensional computer simulation of current extraction from mDBDs sustained in atmospheric pressure N{sub 2} will be discussed. The mDBDs are sandwich structures with an opening of tens-of-microns excited with rf voltage waveforms of up to 25 MHz. Following avalanche by electron impact ionization in the mDBD cavity, the plasma can be expelled from the cavity towards the extraction electrode during the part of the rf cycle when the extraction electrode appears anodic. The electron current extraction can be enhanced by biasing this electrode. The charge collection can be controlled by choice of rf frequency, rf driving voltage, and permittivity of the dielectric barrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Contactless electroreflectance studies of surface potential barrier for N- and Ga-face epilayers grown by molecular beam epitaxy

Two series of N- and Ga-face GaN Van Hoof structures were grown by plasma-assisted molecular beam epitaxy to study the surface potential barrier by contactless electroreflectance (CER). A clear CER resonance followed by strong Franz-Keldysh oscillation of period varying with the thickness of undoped GaN layer was observed for these structures. This period was much shorter for N-polar structures that means smaller surface potential barrier in these structures than in Ga-polar structures. From the analysis of built-in electric field it was determined that the Fermi-level is located 0.27 ± 0.05 and 0.60 ± 0.05 eV below the conduction band for N- and Ga-face GaN surface, respectively.

36 MATERIALS SCIENCE↗

Numerical simulation of torus breakdown to chaos in an atmospheric-pressure dielectric barrier discharge

Understanding the routes to chaos occurring in atmospheric-pressure dielectric barrier discharge systems by changing controlling parameters is very important to predict and control the dynamical behaviors. In this paper, a route of a quasiperiodic torus to chaos via the strange nonchaotic attractor is observed in an atmospheric-pressure dielectric barrier discharge driven by triangle-wave voltage. By increasing the driving frequency, the discharge system first bifurcates to a quasiperiodic torus from a stable single periodic state, and then torus and phase-locking periodic state appear and disappear alternately. In the meantime, the torus becomes increasingly wrinkling and stretching, and gradually approaches a fractal structure with the nonpositive largest Lyapunov exponent, i.e., a strange nonchaotic attractor. After that, the discharge system enters into chaotic state. If the driving frequency is further increased, another well known route of period-doubling bifurcation to chaos is also observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improvement of field emission properties of α-Fe{sub 2}O{sub 3} nanoflakes due to the lowered back contact barrier after high energy X-ray irradiation

Improvement in the field emission properties of α-Fe{sub 2}O{sub 3} nanoflakes is observed after high energy X-ray irradiation from synchrotron radiation. Field emission threshold field of α-Fe{sub 2}O{sub 3} nanoflakes is found to decrease from 10.1 to 7.8 MV/m after X-ray irradiation with the dose of 9.0 × 10{sup 14} phs/cm{sup 2}. Electrical measurement reveals that the potential barrier at the back contact between the α-Fe{sub 2}O{sub 3} layer and the iron substrate changes after X-ray irradiation. The observed threshold field decrease is well explained by the changes in potential barrier at the back contact of α-Fe{sub 2}O{sub 3} nanoflakes, which indicates the back contact plays an important role in controlling the field emission properties of α-Fe{sub 2}O{sub 3} nanoflakes. Our study shows that the α-Fe{sub 2}O{sub 3} nanoflakes are a promising material for the application as field emitter under X-ray environment.

36 MATERIALS SCIENCE↗

Cathode fall measurement in a dielectric barrier discharge in helium

A method based on the “zero-length voltage” extrapolation is proposed to measure cathode fall in a dielectric barrier discharge. Starting, stable, and discharge-maintaining voltages were measured to obtain the extrapolation zero-length voltage. Under our experimental conditions, the “zero-length voltage” gave a cathode fall of about 185 V. Based on the known thickness of the cathode fall region, the spatial distribution of the electric field strength in dielectric barrier discharge in atmospheric helium is determined. The strong cathode fall with a maximum field value of approximately 9.25 kV/cm was typical for the glow mode of the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photon induced Schottky barrier effects in inverse-extraordinary optoconductance structures

We expand upon our previous work and characterize the photo-dependence of the effective Schottky barrier in EOC and I-EOC heterostructures by measuring the open circuit voltage and the change in the reverse bias resistance. Under full illumination by a 5 mW, 632.8 nm HeNe laser, the barrier is effectively eliminated and the Ti-GaAs interface becomes Ohmic. The reverse bias resistance changes by a factor of 209 over an illumination intensity change of 10–5:1. While this work illustrates the behavior of the Schottky interface upon illumination, it also demonstrates the effectiveness of the four-point, van der Pauw measurement fundamental to EOC/I-EOC phenomena at monitoring changes in the active region of the mesa. The resistance is largely unaffected by the photovoltaic, DC offset of the surrounding leads, as indicated by the radial symmetry of 2-D resistance maps obtained by rastering the laser across EOC/IEOC devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Schottky barrier height reduction for metal/n-InP by inserting ultra-thin atomic layer deposited high-k dielectrics

Fermi level pinning at metal/n-InP interface and effective Schottky barrier height (Φ{sub B,eff}) were optimized by inserting ultrathin dielectrics in this work. Comparing the inserted monolayer and bilayer high-k dielectrics, we demonstrated that the introduction of bilayer dielectrics can further reduce Φ{sub B,eff} (from 0.49 eV to 0.22 eV) than the monolayer dielectric (from 0.49 eV to 0.32 eV) even though the overall dielectric thickness was thicker. The additional dipole formed at high-k/high-k interfaces could be used to expound the mechanism. This work proposed an effective solution to reduce resistance contacts for InP based transistors and Schottky barrier transistors.

36 MATERIALS SCIENCE↗

Effect of annealing on the temperature dependence of inelastic tunneling contributions vis-à-vis tunneling magnetoresistance and barrier parameters in CoFe/MgO/NiFe magnetic tunnel junctions

The effect of annealing on the changes in the inelastic tunneling contributions in tunneling conductance of ion beam sputtered CoFe/MgO/NiFe magnetic tunnel junctions (MTJs) is investigated. The inelastic contributions are evaluated using hopping conduction model of Glazman and Matveev in the temperature range of 25–300 K. The hopping through number of series of localized states present in the barrier due to structural defects increases from 9 (in as deposited MTJ) to 18 after annealing (at 200 °C/1 h); although no changes in the interface roughness of CoFe-MgO and MgO-NiFe interfaces are observed as revealed by the x-ray reflectance studies on planar MTJs. The bias dependence of tunneling magnetoresistance (TMR) at 25 K is found to get improved after annealing as revealed by the value V{sub 1/2} (the bias value at which the TMR reaches to half of its value at nearly zero bias); which is 78 mV (in MTJ annealed at 200 °C/1 h) 2.5 times the value of 33 mV (in as deposited MTJ). At 25 K the inelastic tunneling spectra revealed the presence of zero bias anomaly and magnon excitations in the range of 10–15 mV. While the barrier height exhibited a strong temperature dependence with nearly 100% increase from the value at 300 K to 25 K, the temperature dependence of TMR becomes steep after annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An experimental study of atmospheric pressure dielectric barrier discharge (DBD) in argon

In this paper, experimental results on atmospheric pressure argon dielectric barrier discharge (DBD) have been presented. The discharge was generated using a high voltage (0 to 20 kV) power supply operating at frequency of 10 to 30 kHz and was studied by means of electrical and optical measurements. A homogeneous and steady discharge was observed between the electrodes with gap spacing from 1 mm to 3 mm and with a dielectric barrier of thickness 1.5 mm while argon gas is fed at a controlled flow rate of 2liter per min. The electron temperature (T{sub e}) and electron density (n{sub e}) of the plasma have been determined by means of optical emission spectroscopy. Our results show that the electron density is of the order of 10{sup 16} cm{sup −3} while the electron temperature is estimated to be ∼ 1 eV. The homogeneity and non-thermal nature of the discharge were utilized in the investigation of the change in wettabilty of a polymer sample subjected to the treatment by the discharge. Contact angle analysis showed that the discharge was effective in improving the wettability of low density Polyethylene (LDPE) polymer sample after the treatment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaAs/AlGaAs quantum wells with indirect-gap AlGaAs barriers for solar cell applications

We have fabricated GaAs/AlGaAs quantum well (QW) solar cells in which 3 nm-thick QWs and indirect-gap Al{sub 0.78}Ga{sub 0.22}As barriers are embedded, and we studied extraction processes of photogenerated carriers in this QW system. The photocurrent under 700 nm light illumination at voltages close to the open-circuit voltage shows only a small reduction, indicating that the carrier recombination inside QWs is largely suppressed. We attribute this result to an efficient extraction of electrons from the QWs through the X-valley of AlGaAs. The insertion of QWs is shown to be effective in extending the absorption wavelengths and in enhancing the photocurrent. The use of indirect-gap materials as barriers is found to enhance carrier extraction processes, and result in an improved performance of QW solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The intensity of forbidden torsional transitions in electronic spectra of molecules with a 6-fold barrier: Application to toluenes

Franck-Condon forbidden transitions involving methyl rotor modes are seen in the S{sub 1} ← S{sub 0} spectrum of toluene and toluene-like molecules. The strongest of these rotor transitions (m{sup ″} = 1 → m{sup ′} = 2, m{sup ″} = 0 → m{sup ′} = 3a{sub 1}{sup ″}, and m{sup ″} = 1 → m{sup ′} = 4) have been shown by Walker et al. [J. Chem. Phys. 102, 8718 (1995)] to gain intensity through the rotor equivalent of the Herzberg-Teller mechanism. Despite the m{sup ″} = 0 → m{sup ′} = 3a{sub 2}{sup ″} transition being forbidden in this formalism, it is sporadically observed. We show that this transition derives oscillator strength from incomplete mixing of the −3 and +3 free rotor basis states due to torsion-rotation coupling. Calculations demonstrate that this mechanism quantitatively explains the intensities observed for toluene, including their temperature dependence. Because the −3/+3 mixing is weakest when the torsional barrier height, V{sub 6}, is small, the m{sup ″} = 0 → m{sup ′} = 3a{sub 2}{sup ″} transition increases in intensity as |V{sub 6}| decreases. The temperature and |V{sub 6}| dependencies explain why reports of the 0 → 3a{sub 2}{sup ″} transition have been intermittent. The torsion-rotation coupling mechanism is predicted to also give significant intensity to m = 0 → m = 6a{sub 2}{sup ′} transitions relative to m = 0 → m = 6a{sub 1}{sup ′} transitions and to provide intensity to 0 → 3a{sub 2} transitions in molecules with a 3-fold (V{sub 3}) barrier. Comparison between the observed and calculated rotor band contours shows, unexpectedly, that the 3a{sub 1}{sup ″} constants fail to predict the 3a{sub 2}{sup ″} contour despite these two states being derived from the same free rotor basis states. Comparison with the observed spectrum also reveals differences in the separation of the S{sub 1} 3a{sub 2}{sup ″} and 3a{sub 1}{sup ″} levels. The V{sub 6} value determined from analysis of the high resolution, rotationally resolved m{sup ″} = 0 → m{sup ′} = 3a{sub 1}{sup ″} spectrum overestimates the 3a{sub 2}{sup ″}–3a{sub 1}{sup ″} separation by 0.6 cm{sup −1}. We postulate that this may be due to torsion-vibration coupling. The observed toluene torsion-rotation contours have been modeled to provide estimates of the rotational constants for several of the torsional states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferroelectric modulation on resonant tunneling through perovskite double-barriers

The negative differential resistance (NDR) due to resonance tunneling is achieved at room temperature in perovskite double-barrier heterostructures composed of a 10 unit-cell-thick SrTiO{sub 3} quantum well sandwiched in two 10 unit-cell-thick LaAlO{sub 3} barriers. The NDR occurs at 1.2 V and does not change with voltage cycling. When the paraelectric SrTiO{sub 3} quantum well is replaced by a ferroelectric BaTiO{sub 3}, the onset of the NDR can be modulated by polarization switching in the ultrathin BaTiO{sub 3}. A polarization pointing to the collector lowers the NDR voltage but a polarization pointing to the emitter increases it. The shift of the NDR voltage is ascribed to reversal of the extra electric field in the quantum well due to the polarization switching.

36 MATERIALS SCIENCE↗

Towards a better understanding of dielectric barrier discharges in ferroelectrets: Paschen breakdown fields in micrometer sized voids

Charged cellular polypropylene foams (i.e., ferro- or piezoelectrets) demonstrate high piezoelectric activity upon being electrically charged. When an external electric field is applied, dielectric barrier discharges (DBDs) occur, resulting in a separation of charges which are subsequently deposited on dielectric surfaces of internal micrometer sized voids. This deposited space charge is responsible for the piezoelectric activity of the material. Previous studies have indicated charging fields larger than predicted by Townsend's model of Paschen breakdown applied to a multilayered electromechanical model; a discrepancy which prompted the present study. The actual breakdown fields for micrometer sized voids were determined by constructing single cell voids using polypropylene spacers with heights ranging from 8 to 75 μm, “sandwiched” between two polypropylene dielectric barriers and glass slides with semi-transparent electrodes. Subsequently, a bipolar triangular charging waveform with a peak voltage of 6 kV was applied to the samples. The breakdown fields were determined by monitoring the emission of light due to the onset of DBDs using an electron multiplying CCD camera. The breakdown fields at absolute pressures from 101 to 251 kPa were found to be in good agreement with the standard Paschen curves. Additionally, the magnitude of the light emission was found to scale linearly with the amount of gas, i.e., the height of the voids. Emissions were homogeneous over the observed regions of the voids for voids with heights of 25 μm or less and increasingly inhomogeneous for void heights greater than 40 μm at high electric fields.

36 MATERIALS SCIENCE↗