Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “algorithms optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Fuel Efficient Speed Optimization for Real-World Highway Cruising

This paper introduces an eco-driving highway cruising algorithm based on optimal control theory that is applied to a conventionally-powered connected and automated vehicle. Thanks to connectivity to the cloud and/or to infrastructure, speed limit and slope along the future route can be known with accuracy. This can in turn be used to compute the control variable trajectory that will minimize energy consumption without significantly impacting travel time. Automated driving is necessary to the implementation of this concept, because the chosen control variables (e.g., torque and gear) impact vehicle speed. An optimal control problem is built up where quadratic models are used for the powertrain. The optimization is solved by applying Pontryagin’s minimum principle, which reduces the problem to the minimization of a cost function with parameters called co-states. The proposed algorithm assumes piecewise constant slopes and speed limits, and it solves the transition vehicle speeds for each junction of such segments. In addition, a method to extract route information from digital maps is presented, which complies with the proposed optimization algorithm. The algorithms are evaluated in simulation, using Autonomie, a simulation tool for vehicle energy consumption modeling. The optimal control trajectory (e.g., torque, gear) is first computed offline. It is then applied in an open-loop fashion in online simulation, using a forward-looking model of the vehicle in Autonomie. Simulation results show over 8% fuel saving for two selected real-world routes.

Simulation and modeling, Optimization, Vehicle net↗
DOE OSTI2019

Capacity assessment and co-optimization of CO 2 storage and enhanced oil recovery in residual oil zones

Residual oil zones (ROZs) are increasingly being commercially exploited using CO 2 -enhanced oil recovery (CO 2 -EOR) method. In this study, CO 2 storage potential, long-term CO 2 fate and oil recovery potential in ROZs are characterized based on a reservoir model for Goldsmith-Landreth San Andres Unit in the Permian Basin. The effects of CO 2 injection rates, well patterns (five-spot and line-drive), well spacings, injection modes (continuous CO 2 injection and water-alternatinggas injection) on the CO 2 retention in the reservoir and the oil production are investigated. After the preliminary assessment of CO 2 storage and EOR potentials in ROZs, we next develop a novel approach based on a newly developed optimization algorithm-Stochastic Simplex Approximate Gradient (StoSAG) and predictive empirical models constructed using machine learning technique to co-optimize CO 2 storage and oil recovery in ROZs. The performance of co-optimization of CO 2 storage and oil recovery is compared with the performance of optimization of only CO 2 storage.

58 GEOSCIENCES↗
DOE OSTI2021

Proof-of-concept of a reinforcement learning framework for wind farm energy capture maximization in time-varying wind

Here, we present a proof-of-concept distributed reinforcement learning framework for wind farm energy capture maximization. The algorithm we propose uses Q-Learning in a wake-delayed wind farm environment and considers time-varying, though not yet fully turbulent, wind inflow conditions. These algorithm modifications are used to create the Gradient Approximation with Reinforcement Learning and Incremental Comparison (GARLIC) framework for optimizing wind farm energy capture in time-varying conditions, which is then compared to the FLOw Redirection and Induction in Steady State (FLORIS) static lookup table wind farm controller baseline.

17 WIND ENERGY↗
DOE OSTI2019

Multi-solution nature of topology optimization and its application in design for additive manufacturing

The purpose of this paper is to introduce the multi-solution nature of topology optimization (TO) as a design tool for additive manufacturing (AM). The sensitivity of topologically optimized parts and manufacturing constraints to the initial starting point of the optimization process leading to structures with equivalent performance is explored. A modified bi-directional evolutionary structural optimization (BESO) code was used as the numerical approach to optimize a cantilever beam problem and reduce the mass by 50 per cent. Several optimized structures with relatively equivalent mechanical performance were generated by changing the initial starting point of the TO algorithm. These optimized structures were manufactured using fused deposition modeling (FDM). The equivalence of strain distribution in FDM parts was tested with the digital image correlation (DIC) technique and compared with that from the modified BESO code.The results confirm that TO could lead to a wide variety of non-unique solutions based on loading and manufacturability constraints. The modified BESO code was able to reduce the support structure needed to build the simple two-dimensional cantilever beam by 15 per cent while keeping the mechanical performance at the same level. Finally, the originality of this paper lies in introduction and application of the multi-solution nature of TO for AM as a design tool for optimizing structures with minimized features in the overhang condition and the need for support structures.

36 MATERIALS SCIENCE↗
DOE OSTI2015

HF band filter bank multi-carrier spread spectrum

This paper describes modifications to the filter bank multicarrier spread spectrum (FB-MC-SS) system, that was presented in [1] and [2], to enable transmission of this waveform in the HF skywave channel. FB-MC-SS is well suited for the HF channel because it performs well in channels with frequency selective fading and interference. This paper describes new algorithms for packet detection, timing recovery and equalization that are suitable for the HF channel. Also, an algorithm for optimizing the peak to average power ratio (PAPR) of the FBMC- SS waveform is presented. Application of this algorithm results in a waveform with low PAPR. Simulation results using a wide band HF channel model demonstrate the robustness of this system over a wide range of delay and Doppler spreads.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

A Workflow to Optimize Fast Neutron Irradiation in A Thermal Neutron Spectrum Test Reactor Leveraging Open-Source Tools

The Advanced Test Reactor (ATR) located at Idaho National Laboratory (INL) is one of the key nuclear engineering research and testing facilities within the US Department of Energy (DOE). The ATR is one of few high-power research reactors in the world with different application including accelerated testing of nuclear fuel, materials irradiation in a very high neutron flux environment, and medical radioisotope production [1]. Also, the ATR offers opportunities for testing fast spectrum fission and fusion reactor materials. The key challenges in this area are in further detailing and optimizing a fast spectrum environment within a thermal test reactor. This challenge involves researching, developing, and testing novel concepts for the multiplying of neutron populations into ever higher energy spectra in high flux test reactors like ATR. The main objective of this work is to investigate candidate materials for establishing a fast neutron experiment irradiation in thermal neutron spectrum test reactors which can be accomplished by filtering thermal and epithermal neutrons and boosting fast neutrons at designated irradiation positions. However, adding these filters will render the neutron spectrum and the criticality of the system. The selection of the thickness and material layers should be accomplished by developing an optimization design algorithm that is applicable for ATR to enhance the fast neutron spectrum irradiation utilizing high-fidelity Monte Carlo methods along with advanced machine learning capabilities. This paper presents workflow for design optimization to enhance fast neutron irradiation in the ATR. The workflow leverages open-source tools to develop an algorithm that is viable to ATR and can be leveraged in other reactors. The following sections discuss the development of the experiment design optimization workflow and its application to ATR irradiation positions.

42 - ENGINEERING↗
DOE OSTI2024

Multistart algorithm for identifying all optima of nonconvex stochastic functions

Here, we propose a multistart algorithm to identify all local minima of a constrained, nonconvex stochastic optimization problem. The algorithm uniformly samples points in the domain and then starts a local stochastic optimization run from any point that is the "probabilistically best" point in its neighborhood. Under certain conditions, our algorithm is shown to asymptotically identify all local optima with high probability; this holds even though our algorithm is shown to almost surely start only finitely many local stochastic optimization runs. We demonstrate the performance of an implementation of our algorithm on nonconvex stochastic optimization problems, including identifying optimal variational parameters for the quantum approximate optimization algorithm.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Portable interactive visualization of large-scale simulations in geotechnical engineering using Unity3D

Development in large-scale geotechnical engineering simulation places tremendous demand for efficient visualization of such simulation data. This study presents a lightweight software tool, i.e. Geotechnical Interactive Visualization (GIV), as a solution to this challenge, which achieves efficient interactive visualization of large-scale simulations data in geotechnical engineering. Visualization data flow and algorithms specifically optimized for common geotechnical engineering applications are implemented in GIV. GIV can visualize geotechnical structure models with time-varying attributes attached to mesh with fixed topology, and also models with time-varying mesh topologies but no attributes attached, the two most common visualization tasks in geotechnical engineering. Furthermore, challenges for large-scale simulation data visualization, including parallel simulation data redundancy, massive data size, dynamic user interaction, and portability are overcome via specifically designed algorithms for simulation data preprocessing and optimized visualization modules using the powerful 3D rendering and interactive game engine Unity3D. Comparison of GIV with several widely used visualization tools for the visualization of large-scale idealized datasets and realistic geotechnical simulations highlights the visualization efficiency, smooth interactivity, and lightweight features of GIV.

42 ENGINEERING↗
DOE OSTI2017

Optimal deployment of resources for maximizing impact in spreading processes

Significance Spreading processes play an increasingly important role in marketing, opinion setting, and epidemic modeling. Most existing algorithms for optimal resource allocation in spreading processes are based on topological characteristics of the underlying network and aim to maximize impact at infinite time. Clearly, realistic and efficient real-time allocation policies should consider both network properties and details of the dynamics; additionally, control may be applied only to a restricted set of accessible nodes, and impact should be maximized in a limited time window. We introduce a probabilistic targeting framework that incorporates the dynamics and encompasses previously considered optimization formulations. It is based on a scalable dynamic message-passing approach that allows for the solution of large real-world network instances.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

A Novel Transactive Energy Control Mechanism for Collaborative Networked Microgrids

Collaboration of networked microgrids (NMGs) with diverse generation sources is a promising solution to smooth volatile generation output and enhance the utilization efficiency of renewable energies. In addition to centralized and decentralized collaboration mechanisms, transactive energy control (TEC) is an emerging and effective market-based control to enable energy transactions among distributed entities such as NMGs. However, existing studies on TEC suffer from several major weaknesses such as unconstrained/simplified model formulations and slow convergence rates. This paper proposes here a novel TEC mechanism to tackle these weaknesses. First, the centralized mechanism, de-centralized mechanism, and subgradient-based TEC mechanism to coordinate the operation of NMGs are briefly reviewed and modeled by a scenario-based stochastic optimization method. A new TEC mechanism is then proposed, consisting of a TEC framework, mathematical model, pricing rule, and algorithm. The optimality of the proposed TEC mathematical model and pricing rule is demonstrated. The effectiveness of the proposed TEC mechanism is verified in case studies where the NMGs operate in grid-connected, islanded, and congested modes. The advantages of the proposed TEC mechanism are also illustrated through comparisons with the centralized mechanism, decentralized mechanism, and subgradient-based TEC mechanism.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2016

Improving performance of two-group interfacial area transport equation models using genetic algorithms and high resolution experimental data

In the two-fluid transport model, the coupling of mass, momentum and energy transfer between phases is highly dependent on interfacial area transfer terms. Several research efforts in the past have been focused on the development of an interfacial area transport equation model (IATE), in order to eliminate the drawbacks of static flow regime maps currently used in best-estimate thermal-hydraulic system codes. The IATE attempts to model the dynamics that are involved in two phase flows by accounting for the different interaction mechanisms affecting bubble transport in the flow. In general, current IATE models perform poorly in high void fraction flow regimes. As both models depend on closure relations that require empirically determined coefficients, a genetic algorithm is implemented to study their optimization. The preliminary study indicates that improvements are achievable by application of the genetic algorithm. Optimization of coefficients for an entire set of high-resolution wire mesh sensor (WMS) data provided a single set of optimal coefficients. The application of WMS-optimized coefficients to external tests improved IATE performance for similar hydraulic diameters and provided a neutral change in performance for significantly smaller/larger hydraulic diameters. This is a crucial outcome as an optimized set of coefficients that provide significant improvement for a subset of experimental data - is shown to benefit performance in external data for which the coefficients are not specifically optimized. (authors)

42 ENGINEERING↗
DOE OSTI2017

A Geometric Approach to Aggregate Flexibility Modeling of Thermostatically Controlled Loads

Coordinated aggregation of a large population of thermostatically controlled loads (TCLs) presents a great potential to provide various ancillary services to the grid. One of the key challenges in coordination and control of TCLs is developing a simple and portable model to accurately extract their aggregate flexibility. In this paper, we propose a novel geometric approach to model the aggregate flexibility of TCLs. We show that the set of admissible power profiles of an individual TCL is a polytope, and their aggregate flexibility is the Minkowski sum of the individual polytopes. In order to represent their aggregate flexibility in an intuitive way and achieve a tractable approximation, we develop optimization-based algorithms to approximate the polytopes by the homothets of a given convex set. As a special application, this set is chosen as a virtual battery model and the corresponding optimal approximation problems are solved efficiently by equivalent linear programs. Numerical results show that our algorithms yield significant improvement in characterizing the aggregate flexibility over existing modeling methods. Finally, we also conduct case studies to demonstrate the efficacy of our approaches by coordinating TCLs to track a frequency regulation signal from the Pennsylvania-New Jersey-Maryland (PJM) Interconnection.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2014

Dakota, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis :

The Dakota (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a exible and extensible interface between simulation codes and iterative analysis methods. Dakota contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quanti cation with sampling, reliability, and stochastic expansion methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the Dakota toolkit provides a exible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a user's manual for the Dakota software and provides capability overviews and procedures for software execution, as well as a variety of example studies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Stellar and Accretion Disk Parameters of the Close Binary HD 50526

We present a photometric and spectroscopic study of HD 50526, an ellipsoidal binary member of the group Double Periodic Variable stars. Performing data mining in photometric surveys and conducting new spectroscopic observations with several spectrographs during 2008–2015, we obtained orbital and stellar parameters of the system. The radial velocities were analyzed with the genetic PIKAIA algorithm, whereas Doppler tomography maps for the Hα and Hβ lines were constructed with the Total Variation Minimization code. An optimized simplex algorithm was used to solve the inverse problem adjusting the light curve with the best stellar parameters for the system. We find an orbital period of 6.ͩ701 ± 0.ͩ001 and a long photometric cycle of 191 ± 2 days. We detected the spectral features of the coldest star and modeled it with a logg=2.79±0.02 dex giant of mass 1.13 ± 0.02 M {sub ⊙} and effective temperature 10500 ± 125 K. In addition, we determine a mass ratio q = 0.206 ± 0.033 and that the hot star is a B-type dwarf of mass 5.48 ± 0.02 M {sub ⊙}. The V-band orbital light curve can be modeled including the presence of an accretion disk around the hotter star. This fills the Roche lobe of the hotter star and has a radius 14.74 ± 0.02 R {sub ⊙} and the temperature at the outer edge is 9400 K. Two bright spots located in the disk account for the global morphology of the light curve. The Doppler tomography maps of Hα and Hβ reveal complex structures of mass fluxes in the system.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

SU-E-T-85: Comparison of Treatment Plans Calculated Using Ray Tracing and Monte Carlo Algorithms for Lung Cancer Patients Having Undergone Radiotherapy with Cyberknife

Purpose: The latest publications indicate that the Ray Tracing algorithm significantly overestimates the dose delivered as compared to the Monte Carlo (MC) algorithm. The purpose of this study is to quantify this overestimation and to identify significant correlations between the RT and MC calculated dose distributions. Methods: Preliminary results are based on 50 preexisting RT algorithm dose optimization and calculation treatment plans prepared on the Multiplan treatment planning system (Accuray Inc., Sunnyvale, CA). The analysis will be expanded to include 100 plans. These plans are recalculated using the MC algorithm, with high resolution and 1% uncertainty. The geometry and number of beams for a given plan, as well as the number of monitor units, is constant for the calculations for both algorithms and normalized differences are compared. Results: MC calculated doses were significantly smaller than RT doses. The D95 of the PTV was 27% lower for the MC calculation. The GTV and PTV mean coverage were 13 and 39% less for MC calculation. The first parameter of conformality, as defined as the ratio of the Prescription Isodose Volume to the PTV Volume was on average 1.18 for RT and 0.62 for MC. Maximum doses delivered to OARs was reduced in the MC plans. The doses for 1000 and 1500 cc of total lung minus PTV, respectively were reduced by 39% and 53% for the MC plans. The correlation of the ratio of air in PTV to the PTV with the difference in PTV coverage had a coefficient of −0.54. Conclusion: The preliminary results confirm that the RT algorithm significantly overestimates the dosages delivered confirming previous analyses. Finally, subdividing the data into different size regimes increased the correlation for the smaller size PTVs indicating the MC algorithm improvement verses the RT algorithm is dependent upon the size of the PTV.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

A novel triple power cycle featuring a gas turbine cycle with supercritical carbon dioxide and organic Rankine cycles: Thermoeconomic analysis and optimization

In this study, a novel triple power cycle is proposed where waste heat from a gas turbine cycle is utilized to drive a supercritical carbon dioxide (s-CO 2 ) recompression cycle and a recuperative organic Rankine cycle (ORC) in sequence. A detailed thermoeconomic model is developed and implemented in MATLAB to evaluate the performance of the proposed cycle under different operating conditions. Optimization using a particle swarm optimization (PSO) algorithm is performed to minimize the levelized cost of electricity (LCOE) and determine the optimum design conditions of the cycle. The optimization results show that for a 100 MW cycle, the overall thermal efficiency and LCOE are 0.521 and $\$52.819$/MWh, respectively. The turbine inlet temperature of the gas turbine and s-CO 2 cycles are found as the most influential parameters on the thermoeconomic performance of the triple cycle. The proposed triple cycle shows an excellent waste energy recovery potential and superiority over a very thermodynamically efficient cycle from the literature, which included a gas turbine topping cycle and a complex cascade s-CO 2 power cycle used a bottoming cycle. As a result, the proposed triple cycle shows up to 0.9% points higher efficiency while it has fewer heat exchangers and turbomachinery than the cycle from the literature.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

A unified pseudo- C ℓ framework

The pseudo- C ℓ is an algorithm for estimating the angular power and cross-power spectra that is very fast and in realistic cases also nearly optimal. The algorithm can be extended to deal with contaminant deprojection and E/B purification, and can therefore be applied in a wide variety of scenarios of interest for current and future cosmological observations. This paper presents NAMASTER, a public, validated, accurate and easy-to-use software package that, for the first time, provides a unified framework to compute angular cross-power spectra of any pair of spin-0 or spin-2 fields, contaminated by an arbitrary number of linear systematics and requiring B- or E-mode purification, both on the sphere or in the flat-sky approximation. We describe the mathematical background of the estimator, including all the features above, and its software implementation in NAMASTER. We construct a validation suite that aims to resemble the types of observations that next-generation large-scale structure and ground-based CMB experiments will face, and use it to show that the code is able to recover the input power spectra in the most complex scenarios with no detectable bias. NAMASTER can be found at https://github.com/LSSTDESC/NaMaster, and is provided with comprehensive documentation and a number of code examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Validation of Microgrid Algorithms using At-Scale Simulation and Emulation Real-Time (ASSERT) Framework

This paper presents a novel framework for validating microgrid algorithms using a At-Scale Simulation and Emulation Real-Time (ASSERT) setup. The proposed universal microgrid validation framework was developed at Advanced Research on Integrated Energy Systems (ARIES) platform at National Renewable Energy Laboratory in Golden, Colorado, USA. As the number of intercommunicating devices grow in power systems, along with more integration of inverter-based resources, developing and validating microgrid operation and control algorithms is becoming complex and time-consuming task. The ASSERT framework is designed to provide a comprehensive, accurate, and efficient solution for validating microgrid algorithms. It combines at-scale simulations and real-time emulation to create a virtual environment that closely mimics the behavior of a physical microgrids which are characteristic of future smart distribution systems, such as: (1) increasing variability in the physical size of new energy technologies; (2) requiring control large numbers of interconnected devices, and (3) integrating diverse technologies that have not previously worked together. The paper describes the technical details of the ASSERT framework, its validation process, and its benefits over traditional validation methods. The framework's ability to validate the performance of various algorithms is demonstrated through a case study, which shows that it can effectively identify the weaknesses of an algorithm and optimize its performance. Overall, the ASSERT framework is a promising tool that can significantly enhance the development and validation of microgrid algorithms, leading to more reliable and efficient microgrid operation.

at-scale↗