Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aerosol absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Plumes and Blooms: Modeling the Case II Waters of the Santa Barbara Channel

The goal of the Plumes and Blooms (PnB) project is to develop, validate and apply to imagery state-of-the-art ocean color algorithms for quantifying sediment plumes and phytoplankton blooms for the Case II environment of the Santa Barbara Channel. We conduct monthly to twice-monthly transect observations across the Santa Barbara Channel to develop an algorithm development and product validation data set. The PnB field program started in the summer of 1996. At each of the 7 PnB stations, a complete verification bio-geo-optical data set is collected. Included are redundant measures of apparent optical properties (remote sensing reflectance and diffuse attenuation spectra), as well as in situ profiles of spectral absorption, beam attenuation and backscattering coefficients. Water samples are analyzed for component in vivo absorption spectra, fluorometric chlorophyll, phytoplankton pigment (by the SDSU CHORS laboratory), and inorganic nutrient concentrations. A primary goal is to use the PnB field data set to objectively tune semi-analytical models of ocean color for this site and apply them using available satellite imagery (SeaWiFS and MODIS). In support of this goal, we have also been addressing SeaWiFS ocean color and AVHRR SST imagery. We also are using the PnB data set to address time/space variability of water masses in the Santa Barbara Channel and its relationship to the 1997/1998 El Nino. However, the comparison between PnB field observations and satellite estimates of primary products has been disappointing. We find that field estimates of water-leaving radiance, L(sub wN)(lambda), correspond poorly to satellite estimates for both SeaWiFS and MODIS local area coverage imagery. We believe this is due to poor atmospheric correction due to complex mixtures of aerosol types found in these near-coastal regions. Last, we remain active in outreach activities.

Siegel, D. A.↗
NASA NTRS2003

Plumes and Blooms: Observations, Analysis and Modeling for SIMBIOS

The goal of the Plumes and Blooms (PnB) project is to develop, validate and apply to imagery state-of-theart ocean color algorithms for quantifying sediment plumes and phytoplankton blooms for the Case I1 environment of the Santa Barbara Channel. We conduct monthly to twice-monthly transect observations across the Santa Barbara Channel to develop an algorithm development and product validation data set. The PnB field program started in the summer of 1996. At each of the 7 PnB stations, a complete verification bio-geo-optical data set is collected. Included are redundant measures of apparent optical properties (remote sensing reflectance and diffuse attenuation spectra), as well as in situ profiles of spectral absorption, beam attenuation and backscattering coefficients. Water samples are analyzed for component in vivo absorption spectra, fluorometric chlorophyll, phytoplankton pigment (by the SDSU CHORS laboratory), and inorganic nutrient concentrations (Table 1). A primary goal is to use the PnB field data set to objectively tune semi-analytical models of ocean color for this site and apply them using available satellite imagery (SeaWiFS and MODIS). In support of this goal, we have also been addressing SeaWiFS ocean color and AVHRR SST imagery (Otero and Siegel, 2003). We also are using the PnB data set to address time/space variability of water masses in the Santa Barbara Channel and its relationship to the 1997/1998 El Niiio. However, the comparison between PnB field observations and satellite estimates of primary products has been disappointing. We find that field estimates of water-leaving radiance, LwN(h), correspond poorly to satellite estimates for both SeaWiFS and MODIS local area coverage imagery. We believe this is due to poor atmospheric correction due to complex mixtures of aerosol types found in these near-coastal regions. Last, we remain active in outreach activities.

Siegel, D. A.↗
NASA NTRS2019

Advancements in the Aerosol Robotic Network (AERONET) Version 3 database – automated near-real-time quality control algorithm with improved cloud screening for Sun photometer aerosol optical depth (AOD) measurements

The Aerosol Robotic Network (AERONET) has provided highly accurate, ground-truth measurements of the aerosol optical depth (AOD) using Cimel Electronique Sun–sky radiometers for more than 25 years. In Version 2 (V2) of the AERONET database, the near-real-time AOD was semiautomatically quality controlled utilizing mainly cloud-screening methodology, while additional AOD data contaminated by clouds or affected by instrument anomalies were removed manually before attaining quality-assured status (Level 2.0). The large growth in the number of AERONET sites over the past 25 years resulted in significant burden to the manual quality control of millions of measurements in a consistent manner. The AERONET Version 3 (V3) algorithm provides fully automatic cloud screening and instrument anomaly quality controls. All of these new algorithm updates apply to near-real-time data as well as post-field-deployment processed data, and AERONET reprocessed the database in 2018. A full algorithm redevelopment provided the opportunity to improve data inputs and corrections such as unique filter-specific temperature characterizations for all visible and near-infrared wavelengths, updated gaseous and water vapor absorption coefficients, and ancillary data sets. The Level 2.0 AOD quality-assured data set is now available within a month after post-field calibration, reducing the lag time from up to several months. Near-real-time estimated uncertainty is determined using data qualified as V3 Level 2.0 AOD and considering the difference between the AOD computed with the pre-field calibration and AOD computed with pre-field and post-field calibration. This assessment provides a near-real-time uncertainty estimate for which average differences of AOD suggest a +0.02 bias and one sigma uncertainty of 0.02, spectrally, but the bias and uncertainty can be significantly larger for specific instrument deployments. Long-term monthly averages analyzed for the entire V3 and V2 databases produced average differences (V3–V2) of +0.002 with a ±0.02 SD (standard deviation), yet monthly averages calculated using time-matched observations in both databases were analyzed to compute an average difference of −0.002 with a ±0.004 SD. The high statistical agreement in multiyear monthly averaged AOD validates the advanced automatic data quality control algorithms and suggests that migrating research to the V3 database will corroborate most V2 research conclusions and likely lead to more accurate results in some cases.

David M. Giles↗
NASA NTRSDate not supplied

Progress Towards a Common CERES Cloud Mask Algorithm for MODIS and VIIRS: Evaluation using CALIOP Data

For over two decades The Clouds and the Earth’s Radiant Energy System (CERES) project has endeavored to produce a long-term global climate data record for detecting changes in the Earth’s radiation budget and to improve understanding of how clouds contribute to those changes. CERES incorporates cloud information derived from passive narrowband satellite imaging radiometers, and over the course of the project different instruments have contributed to this effort, namely the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Visible Infrared Imaging Radiometer Suite (VIIRS).Cloud properties have been derived from MODIS on the Aqua satellite for CERES since 2002,and VIIRS on the NOAA-20 satellite launched in 2017 will continue the cloud record once Aqua-MODIS reaches the end of its operational lifetime. However, MODIS and VIIRS have different spectral capabilities and characteristics which complicates our ability to seamlessly transition the record from MODIS to VIIRS. This study evaluates some of the recent algorithm modifications incorporated by the CERES Cloud Working Group towards developing a unified cloud mask algorithm for MODIS and VIIRS that utilizes a set of spectral bands common to both instruments. Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) data products are used to evaluate MODIS and VIIRS regional cloud fraction estimates and identify areas where improvements can be made. The cloud mask algorithm relies on computed estimates of cloud-free top-of-atmosphere radiances to differentiate cloudy and cloud-free imager pixels. The unified cloud mask algorithm currently under development uses a reduced number of spectral bands common to both MODIS and VIIRS and so relies on the accuracy of these simulated cloud-free radiances more heavily than predecessor algorithms, i.e., the CERES Edition 4 cloud mask, which use as much spectral information as available on each imager with less consideration for cross-platform consistency. Our validation strategy using CALIOP data is also described. The CALIOP observations are critical for assessing cloud detection accuracies and for independently confirming cloud-free conditions which enables a more robust evaluation of the simulated cloud-free radiances for biases due to factors such as view angle and the spectral dependence of water vapor absorption. These effects are known to differ for the two satellite instruments. Comparisons of MODIS and VIIRS cloud fractions are presented in context with estimates from CALIOP and from the CERES Edition 4 cloud mask algorithm to gauge current progress in developing accurate and consistent MODIS and VIIRS cloud properties for CERES.

CERES↗
NASA NTRSDate not supplied

Look-up Table for Lidar and Polarimeter Liquid Water Cloud Studies

- Combined lidar and polarimeter retrievals of aerosol, cloud and ocean microphysical properties involve single scattering cloud calculations that are time consuming. - We create a look-up table to speed up calculations for water droplets in the atmosphere. The gained increase in computational efficiency is up to 10^(4). - In our new Lorenz-Mie look-up table we tabulate the light scattering by an ensemble of homogeneous isotropic spheres at wavelengths starting from 0.35 µm. - The look-up table covers liquid water cloud particles with radii in the range of 0.001—500 µm. - The covered complex refractive indices range from 1.25 to 1.36 for the real part and from 0 to 0.001 for the imaginary part. - Using look-up table, we can precisely compute inherent optical properties for the particle size distributions ranging up to 100 µm for the effective radius and up to 0.6 for the effective variance. - We test wavelengths from 0.35 to 2.3 µm and find that the P12 element of the normalized scattering matrix is precise to within 1% for 96.7% of cases; the absorption and backscatter coefficients, and lidar ratio are precise to within 1% for 99% of cases; the P11 , P33 and P34 elements of the normalized scattering matrix, the asymmetry parameter, the extinction and scattering coefficients are precise to within 1% for all cases. - We provide an example of using the look-up table with in situ measurements to determine agreement with remote sensing. - The look-up table along with examples of its use soon will be freely available at https://science.larc.nasa.gov/polarimetry

Eduard Chemyakin↗
NASA NTRS2019

Radiative Heating Rates Computed With Clouds Derived From Satellite‐Based Passive and Active Sensors and their Effects on Generation of Available Potential Energy

Radiative heating rates computed with cloud properties derived from passive and active sensors are investigated. Zonal monthly radiative heating rate anomalies computed using both active and passive sensors show that larger variability in longwave cooling exists near the tropical tropopause and near the top of the boundary layer between ~50°N to ~50°S. Aerosol variability contributes to increases in shortwave heating rate variability. When zonal monthly mean cloud effects on the radiative heating rate computed with both active and passive sensors and those computed with passive sensor only are compared, the latter shows cooling and heating peaks corresponding to cloud top and base height ranges used for separating cloud types. The difference of these two sets of cloud radiative effect on heating rates in the middle to upper troposphere is larger than the radiative heating rate uncertainty estimated based on the difference of two active sensor radiative heating rate profile data products. In addition, radiative heating rate contribution to generation of eddy available potential energy is also investigated. Although radiation contribution to generation of eddy available potential energy averaged over a year and the entire globe is small, radiation increases the eddy available potential energy in the northern hemisphere during summer. Two key elements that longwave radiation contribute to the generation of eddy potential energy are (1) longitudinal temperature gradient in the atmosphere associated with land and ocean surface temperatures contrasts and absorption of longwave radiation emitted by the surface and (2) cooling near the cloud top of stratocumulus clouds.

Kato, Seiji↗
NASA NTRS2005

Aerosol properties computed from aircraft-based observations during the ACE- Asia campaign: A case study of lidar ratio closure and aerosol radiative effects - 2

For a vertical profile with three distinct layers (marine boundary, pollution and dust), observed during the ACE-Asia campaign, we carried out a comparison between the modeled lidar ratio vertical profile and that obtained from collocated airborne NASA AATS-14 sunphotometer and shipborne Micro-Pulse Lidar (MPL) measurements. Vertically resolved lidar ratio was calculated from two size distribution vertical profiles - one obtained by inversion of sunphotometer-derived extinction spectra, and one measured in-situ - combined with the same refractive index model based on aerosol chemical composition. The aerosol model implies single scattering albedos of 0.78 - 0.81 and 0.93 - 0.96 at 0.523 microns (the wavelength of the lidar measurements), in the pollution and dust layers, respectively. The lidar ratios calculated from the two size distribution profiles have close values in the dust layer; they are however, significantly lower than the lidar ratios derived from combined lidar and sunphotometer measurements, most probably due to the use of a simple nonspherical model with a single particle shape in our calculations. In the pollution layer, the two size distribution profiles yield generally different lidar ratios. The retrieved size distributions yield a lidar ratio which is in better agreement with that derived from lidar/sunphotometer measurements in this layer, with still large differences at certain altitudes (the largest relative difference was 46%). We explain these differences by non-uniqueness of the result of the size distribution retrieval and lack of information on vertical variability of particle refractive index. Radiative transfer calculations for this profile showed significant atmospheric radiative forcing, which occurred mainly in the pollution layer. We demonstrate that if the extinction profile is known then information on the vertical structure of absorption and asymmetry parameter is not significant for estimating forcing at TOA and the surface, while it is of importance for estimating vertical profiles of radiative forcing and heating rates.

Kuzmanoski, Maja↗
NASA NTRS2010

Extinction-to-Backscatter Ratios of Saharan Dust Layers Derived from In-Situ Measurements and CALIPSO Overflights During NAMMA

We determine the aerosol extinction-to-backscatter (Sa) ratios of dust using airborne in-situ measurements of microphysical properties, and CALIPSO observations during the NASA African Monsoon Multidisciplinary Analyses (NAMMA). The NAMMA field experiment was conducted from Sal, Cape Verde during Aug-Sept 2006. Using CALIPSO measurements of the attenuated backscatter of lofted Saharan dust layers, we apply the transmittance technique to estimate dust Sa ratios at 532 nm and a 2-color method to determine the corresponding 1064 nm Sa. Using this method, we found dust Sa ratios of 39.8 plus or minus 1.4 sr and 51.8 plus or minus 3.6 sr at 532 nm and 1064 nm, respectively. Secondly, Sa ratios at both wavelengths is independently calculated using size distributions measured aboard the NASA DC-8 and estimates of Saharan dust complex refractive indices applied in a T-Matrix scheme. We found Sa ratios of 39.1 plus or minus 3.5 sr and 50.0 plus or minus 4 sr at 532 nm and 1064 nm, respectively, using the T-Matrix calculations applied to measured size spectra. Finally, in situ measurements of the total scattering (550 nm) and absorption coefficients (532 nm) are used to generate an extinction profile that is used to constrain the CALIPSO 532 nm extinction profile.

Omar, Ali H.↗
NASA NTRS1994

Stability of the Martian atmosphere: Is heterogeneous catalysis essential?

A comprehensive homogeneous gas phase photochemical model is developed to study the problem of stability of the Martian atmosphere. The one-dimensional model extends from the ground up to 220 km, passing through the homopause at 125 km. The model thus couples the lower (neutral) atmosphere to the ionosphere above which provides significant downward flux of carbon monoxide and oxygen atoms. It is concluded on the basic of currently accepted values for globally and seasonally averaged water vapor abundance, dust opacity and the middle atmospheric eddy mixing coefficient, as well as the relevant laboratory data (particularly the temperature dependence of CO2 absorption cross section and the rate constant for CO+OH reaction), that the rate of re-formation of carbon dioxide exceeds its photolytic destruction rate by about 40%. Furthermore, it is found that this result is virtually independent of the choice of eddy mixing coefficient, unless its value in the middle atmosphere exceeds 10(exp 8) sq cm/sec or is far smaller than 10(exp 5)sq cm/sec, or the dust opacity, unless it exceeds unity, or the water vapor mixing ratio at the surface, unless it is far smaller (less than or = 1 ppm) or far greater (greater than or = 500 ppm) than the average value (approximately 150 ppm). Since none of these extremes represent globally and seasonally averaged conditions on Mars, we propose that the present model requires existence of a mechanism to throttle down the recycling rate of carbon dioxide on Mars. Therefore, it is suggested that a heterogeneous process which provides a sink to the species that participate in the recycling of CO2, i.e., H2O, H2O2, OH, CO or O, in particular, may be necessary to bring about the balance between the CO2 recycling rate and its photolytic destruction rate. Aerosols of dust or ice (pure or doped water or carbon dioxide ice present in the atmosphere of Mars) can provide the appropriate adsorption sites for the above heterogeneous process. Despite our conclusion that some heterogeneous process may be needed, it is important to recognize that one-dimensional models can only provide first-order results which, most likely, represent globally and seasonally averaged conditions. However, it is only after actual temporal, latitudinal and longitudinal variations of relevant atmospheric parameters are included in the model that one can determine fuly whether the problem of atmospheric stabiltiy still continues to persist and whether some heterogeneous process is required to correct it.

Atreya, Sushil K.↗
DOE OSTI2025

High-Spectral Resolution Lidar (HSRL) Instrument Handbook

High-spectral-resolution lidar (HSRL) systems provide vertical profiles of optical depth, backscatter cross-section, depolarization, and backscatter phase function. All HSRL measurements are calibrated by reference to molecular scattering, which is measured at each point in the lidar profile. Like the Raman lidar (RL), but unlike simple backscatter lidars such as the micropulse lidar (MPL), this enables the HSRL to measure backscatter cross-sections and optical depths without prior assumptions about the scattering properties of the atmosphere. The depolarization observations allow robust discrimination between ice and water clouds. Rigorous error estimates can be computed for all measurements. A very narrow angular field of view reduces multiple scattering contributions. The small field of view, coupled with a narrow optical bandwidth, nearly eliminates noise due to scattered sunlight. The laser transmitter is a diode-pumped, frequency-doubled Nd:YAG laser. Narrow-band, single-frequency operation is provided by injection seeding with a single-frequency, cw-diode-pumped diode laser. The main laser cavity is maintained in resonance with the seed laser by adjusting the cavity length to minimize the time between the Q-switch trigger and the emission of the laser pulse. The emission wavelength is tuned via temperature control of the seed laser crystal and is locked to line #1109 of the iodine absorption spectra. Locking is accomplished by minimizing the transmission through a 2-cm-long iodine absorption cell. Use of a high-repetition-rate laser and expansion of the transmitted beam through a 400-mm telescope reduces the transmitted energy density to eye-safe levels. It is possible to look directly into the output beam without hazard. The receiver and transmitter use the same afocal telescope, simplifying the maintenance of stable alignment of the transmitter and receiver although the angular FOV is only 100 μrad. The small FOV and the 4-kHz repetition rate also limit the near-field signal strength, making it possible to record continuous profiles that start at an altitude of ~100 m and extend to 30 km using photon counting detectors. The small FOV also suppresses multiple scattering contributions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2000

Lidar Technology at the Goddard Laser and Electro-Optics Branch

The Laser and Electro-Optics Branch at Goddard Space flight Center was established about three years ago to provide a focused center of engineering support and technology development in these disciplines with an emphasis on spaced based instruments for Earth and Space Science. The Branch has approximately 15 engineers and technicians with backgrounds in physics, optics, and electrical engineering. Members of the Branch are currently supporting a number of space based lidar efforts as well as several technology efforts aimed at enabling future missions. The largest effort within the Branch is support of the Ice, Cloud, and land Elevation Satellite (ICESAT) carrying the Geoscience Laser Altimeter System (GLAS) instrument. The ICESAT/GLAS primary science objectives are: 1) To determine the mass balance of the polar ice sheets and their contributions to global sea level change; and 2) To obtain essential data for prediction of future changes in ice volume and sea-level. The secondary science objectives are: 1) To measure cloud heights and the vertical structure of clouds and aerosols in the atmosphere; 2) To map the topography of land surfaces; and 3) To measure roughness, reflectivity, vegetation heights, snow-cover, and sea-ice surface characteristics. Our efforts have concentrated on the GLAS receiver component development, the Laser Reference Sensor for the Stellar Reference System, the GLAS fiber optics subsystems, and the prelaunch calibration facilities. We will report on our efforts in the development of the space qualified interference filter [Allan], etalon filter, photon counting detectors, etalor/laser tracking system, and instrument fiber optics, as well as specification and selection of the star tracker and development of the calibration test bed. We are also engaged in development work on lidar sounders for chemical species. We are developing new lidar technology to enable a new class of miniature lidar instruments that are compatible with small Discovery-class orbiters now in the NASA planetary program. The purpose of the lidar is to continuously profile the water vapor and dust in the Mars atmosphere from orbit in order to quantify its dynamics, their relationship in the diurnal cycles, and to infer water vapor exchange with the Mars surface. To remotely measure the water-vapor height profiles, we will use the differential absorption lidar (DIAL) technique. We are also developing a laser sensor for measuring the total column content of CO2 in the atmosphere of the earth. CO2 is the principal greenhouse gas and has increased by roughly 80 ppm in the last century and a half. We will report our efforts in the development of the laser transmitter and photon counting detector components for a Mars Orbiting DIAL system and for the CO2 sounder.

Heaps, William S.↗
NASA NTRS1995

An Analysis of Neptune's Stratospheric Haze Using High-Phase-Angle Voyager Images

We have inverted high-phase-angle Voyager images of Neptune to determine the atmospheric extinction coefficient as a function of altitude and the scattering phase function at a reference altitude. Comparisons between theoretical model and observations help separate the contributions from molecular Rayleigh and aerosol scattering and help determine the variation of the aerosol size, concentration, and scattering properties with altitude. Further comparisons between models and data allow us to place constraints on the location and composition of the hazes, the concentration and downward flux of certain condensible hydrocarbon gases, the eddy diffusion coefficient in the lower stratosphere, and the thermal profile in parts of Neptune's stratosphere. We find that a distinct stratospheric haze layer exists near 12(sub -1, sup +1) mbar in Neptune's lower stratosphere, most probably due to condensed ethane. The derived stratospheric haze production rate of 1.0(sub -0.3, sup +0.2) x 10(exp -15) g cm(exp -2) sec(exp -1) is substantially lower than photochemical model predictions. Evidence for hazes at higher altitudes also exists. Unlike the situation on Uranus, large particles (0.08-0.11 microns) may be present at high altitudes on Neptune (e.g., near 0.5 mbar), well above the region in which we expect the major hydrocarbon species to condense. Near 28 mbar, the mean particle size is about 0.13(sub -0.02, sup +0.02) microns with a concentration of 5(sub -3, sup +3) particles cm(exp -3). The cumulative haze extinction optical depth above 15 mbar in the clear filter is approx. 3 x 10(exp -3), and much of this extinction is due to scattering rather than absorption; thus, if our limb-scan sites are typical, the hazes cannot account for the stratospheric temperature inversion on Neptune and may not contribute significantly to atmospheric heating. We compare the imaging results with the results from other observations, including those of the Voyager Photopolarimeter Subsystem, and discuss differences between Neptune and Uranus.

Moses, Julianne I.↗
NASA NTRS2007

Differential Radiometers Using Fabry-Perot Interferometric Technique for Remote Sensing Determination of Various Atmospheric Trace Gases

New type of remote sensing instrument based upon the Fabry-Perot inte rferometric technique has been developed at NASA's Goddard Space Flight Center. Fabry-Perot interferometry (FPI) is a well known, powerful spectroscopic technique and one of its many applications is to be use d to measure greenhouse gases and also some harmful species in the at mosphere. With this technique, absorption of particular species is me asured and related to its concentration. A solid Fabry-Perot etalon is used as a frequency filter to restrict the measurement to particular absorption bands of the gas of interest. With adjusting the thicknes s of the etalon that separation (in frequency) of the transmitted fri nges can be made equal to the almost constant separation of the gas a bsorption lines. By adjusting the temperature of the etalon, which changes the index of refi-action of its material, the transmission fring es can be brought into nearly exact correspondence with absorption li nes of the particular species. With this alignment between absorption lines and fringes, changes in the amount of a species in the atmosph ere strongly affect the amount of light transmitted by the etalon and can be related to gas concentration. The instrument that we have dev eloped detects the absorption of various atmospheric trace gases in d irect or reflected sunlight. Our instrument employing Fabry-Perot interferometer makes use of two features to achieve high sensitivity. The first is high spectral resolution enabling one to match the width of an atmospheric absorption feature by the instrumental band pass. The second is high optical throughput enabled by using multiple spectral lines simultaneously. For any species that one wishes to measure, thi s first feature is available while the use of multiple spectral features can be employed only for species with suitable spectra and freedom from interfering species in the same wavelength region. We have deve loped an instrument for use as ground based, airborne and satellite s ensor for gases such as carbon dioxide (1570 nm), oxygen (762 nm and 768 nm lines sensitive to changes in oxygen pressure and oxygen temper ature) and water vapor (940 nm). Our current goal is to develop an ul tra precise, inexpensive, ground based device suitable for wide deplo yment as a validation instrument for the Orbiting Carbon Observatory (OCO) satellite. We show sensitivity measurements for CO2, 02, and H2 O, compare our measurements to those obtained using other types of sensors and discuss some of the peculiarities that must be addressed in order to provide the very high quality column detection required for solving problems about global distribution of greenhouse gases and cl imatological models. In another area of research we are interested in developing a small-size channel for CO2 capable of doing simultaneous measurements with the AERONET (Aerosol Robotic Network) at NASA, God dard to study the hypothesis that atmospheric aerosols affect the reg ional terrestrial carbon cycle. We present recent data from our groun d based measurements of O2, CO2, H2O and (13)CO2 and discuss extensio n of the technique to new species and applications.

Georgieva, E. M.↗
NASA NTRS2012

Rugged, Portable, Real-Time Optical Gaseous Analyzer for Hydrogen Fluoride

Hydrogen fluoride (HF) is a primary evolved combustion product of fluorinated and perfluorinated hydrocarbons. HF is produced during combustion by the presence of impurities and hydrogen- containing polymers including polyimides. This effect is especially dangerous in closed occupied volumes like spacecraft and submarines. In these systems, combinations of perfluorinated hydrocarbons and polyimides are used for insulating wiring. HF is both highly toxic and short-lived in closed environments due to its reactivity. The high reactivity also makes HF sampling problematic. An infrared optical sensor can detect promptly evolving HF with minimal sampling requirements, while providing both high sensitivity and high specificity. A rugged optical path length enhancement architecture enables both high HF sensitivity and rapid environmental sampling with minimal gaseous contact with the low-reactivity sensor surfaces. The inert optical sample cell, combined with infrared semiconductor lasers, is joined with an analog and digital electronic control architecture that allows for ruggedness and compactness. The combination provides both portability and battery operation on a simple camcorder battery for up to eight hours. Optical detection of gaseous HF is confounded by the need for rapid sampling with minimal contact between the sensor and the environmental sample. A sensor is required that must simultaneously provide the required sub-parts-permillion detection limits, but with the high specificity and selectivity expected of optical absorption techniques. It should also be rugged and compact for compatibility with operation onboard spacecraft and submarines. A new optical cell has been developed for which environmental sampling is accomplished by simply traversing the few mm-thick cell walls into an open volume where the measurement is made. A small, low-power fan or vacuum pump may be used to push or pull the gaseous sample into the sample volume for a response time of a few seconds. The optical cell simultaneously provides for an enhanced optical interaction path length between the environmental sample and the infrared laser. Further, the optical cell itself is comprised of inert materials that render it immune to attack by HF. In some cases, the sensor may be configured so that the optoelectronic devices themselves are protected and isolated from HF by the optical cell. The optical sample cell is combined with custom-developed analog and digital control electronics that provide rugged, compact operation on a platform that can run on a camcorder battery. The sensor is inert with respect to acidic gases like HF, while providing the required sensitivity, selectivity, and response time. Certain types of combustion events evolve copious amounts of HF, very little of other gases typically associated with combustion (e.g., carbon monoxide), and very low levels of aerosols and particulates (which confound traditional smoke detectors). The new sensor platform could warn occupants early enough to take the necessary countermeasures.

Pilgrim, Jeffrey↗
NASA NTRS2013

Airborne MAX-DOAS Measurements Over California: Testing the NASA OMI Tropospheric NO2 Product

Airborne Multi-AXis Differential Optical Absorption Spectroscopy (AMAX-DOAS) measurements of NO2 tropospheric vertical columns were performed over California for two months in summer 2010. The observations are compared to the NASA Ozone Monitoring Instrument (OMI) tropospheric vertical columns (data product v2.1) in two ways: (1) Median data were compared for the whole time period for selected boxes, and the agreement was found to be fair (R = 0.97, slope = 1.4 +/- 0.1, N= 10). (2) A comparison was performed on the mean of coincident AMAX-DOAS measurements within the area of the corresponding OMI pixels with the tropospheric NASA OMI NO2 assigned to that pixel. The effects of different data filters were assessed. Excellent agreement and a strong correlation (R = 0.85, slope = 1.05 +/- 0.09, N= 56) was found for (2) when the data were filtered to eliminate large pixels near the edge of the OMI orbit, the cloud radiance fraction was<50%, the OMI overpass occurred within 2 h of the AMAX-DOAS measurements, the flight altitude was>2 km, and a representative sample of the footprint was taken by the AMAX-DOAS instrument. The AMAX-DOAS and OMI data sets both show a reduction of NO2 tropospheric columns on weekends by 38 +/- 24% and 33 +/- 11%, respectively. The assumptions in the tropospheric satellite air mass factor simulations were tested using independent measurements of surface albedo, aerosol extinction, and NO2 profiles for Los Angeles for July 2010 indicating an uncertainty of 12%.

remote sensing↗
NASA NTRS1994

A meteorological interpretation of the Arctic Boundary Layer Expedition (ABLE) 3B flight series

The Arctic Boundary Layer Expedition (ABLE) 3B was conducted to determine the summertime tropospheric distribution, sources, and sinks of important trace gas and aerosol species over the wetlands and boreal forests of central and eastern Canada. Isentropic trajectories and analyzed midtropospheric circulation patterns were used to group flights according to the transport histories of polar, midlatitude, or tropical air masses which were sampled. These data were then divided into bands of potential temperature levels representing the low, middle, and maximum aircraft altitudes to assess the effects of both local and long distance transport and natural and man-made pollutants to the measured chemical species. Detailed case studies are provided to depict the complex three-dimensional airflow regimes that transported air with differing chemical signatures to the study area. Mission 6 details the large-scale movement of smoke in the generally prevailing west to northwesterly airflow that was observed on the majority of flights. Mission 1 analyzes the horizontal and vertical motions of maritime Pacific air in the upper troposphere that was routinely mixed downward to the aircraft altitude. Finally, mission 14 tracks the far northward excursion of tropical air that had been associated with a Pacific typhoon. The following three factors all had important influences on the collected chemical data sets: (1) local and distant stratospheric in puts into the upper and middle troposphere; (2) biomass-burning plumes from active fires in Alaska and Canada; (3) a band of 'low ozone' upper tropospheric air that was observed by airborne differential absorption lidar (DIAL) above the aircraft maximum altitude. Other modification factors observed on some flights included urban pollution from U.S. and Canadian cities, tropical air that had been associated with a Pacific typhoon, and precipitation scavenging by clouds and rain. Many flights were affected by several of the above factors which led to complex chemical signatures that will be discussed in other companion papers.

Shipham, Mark C.↗
NASA NTRS1999

The Budget and Partitioning of Stratospheric Chlorine During the 1997 Arctic Summer

Volume mixing ratio profiles of HCl, HOCl, ClNO3, CH3Cl, CFC-12, CFC-11, CCl4, HCFC-22, and CFC-113 were measured simultaneously from 9 to 38 km by the Jet Propulsion Laboratory MkIV Fourier Transform Infrared solar absorption spectrometer during two balloon flights from Fairbanks, Alaska (64.8 N), on May 8 and July 8, 1997. The altitude variation of total organic chlorine (CCly) total inorganic chlorine (Cly), and the nearly constant value (3.7 +/- 0.2 ppbv) of their sum (Cl(sub TOT)) demonstrates that the stratospheric chlorine species available to react with O3 are supplied by the decomposition of organic chlorinated compounds whose abundances are well quantified. Measured profiles of HCl and ClNO3 agree well with profiles found by photochemical model (differences < 10% for altitudes below 35 km) constrained by various other constituents measured by MkIV. The production of HCl by ClO + OH plays a relatively small role in the partitioning of HCl and ClNO3 for the sampled air masses. However, better agreement with the measured profiles of HCl and ClNO3 is obtained when this source of HCl is included in the model. Both the measured and calculated [ClNO3]/[HCl] ratios exhibit the expected near linear variation with [O3]2/[CH4] over a broad range of altitudes. MkIV measurements of HCl, ClNO3, and CC1y agree well with ER-2 in situ observations of these quantities for directly comparable air masses. These results demonstrate good understanding of the budget of stratospheric chlorine and that the partitioning of inorganic chlorine is accurately described by photochemical models that employ JPL97 reaction rates and production of HCl from ClO + OH for the environmental conditions encountered: relatively warm temperatures, long periods of solar illumination, and relatively low aerosol surface areas.

Sen, B.↗
NASA NTRS1999

The Budget and Partitioning of Stratospheric Chlorine During the 1997 Arctic Summer

Volume mixing ratio profiles of HCl, HOCl, ClNO3, CH3Cl, CFC-12, and CFC-11, CCl4, HCFC-22, and CFC-113 were measured simultaneously from 9 to 38 km by the Jet Propulsion Laboratory MkIV Fourier Transform Infrared solar absorption spectrometer during two balloon flights from Fairbanks, Alaska (64.8 N), on May 8 and July 8, 1997. The altitude variation of total organic chlorine (CCl(sub y)), total inorganic chlorine (Cl(sub y)), and the nearly constant value (3.7 +/- 0.2 ppbv) of their sum (Cl(sub TOT)) demonstrates that the stratospheric chlorine species available to react with O3 are supplied by the decomposition of organic chlorinated compounds whose abundances are well quantified. Measured profiles of HCl and ClNO3 agree well with profiles found by photochemical model (differences < 10% for altitudes below 35 km) constrained by various other constituents measured by MkIV. The production of HCl by ClO + OH plays a relatively small role in the partitioning of HCl and ClNO3 for the sampled air masses. However, better agreement with the measured profiles of HCl and ClNO3 is obtained when this source of HCl is included in the model. Both the measured and calculated [ClNO3]/[HCl] ratios exhibit the expected near linear variation with [O3](sup 2)/[CH4] over a broad range of altitudes. MkIV measurements of HCl, ClNO3, and CCl(sub y) agree well with ER-2 in situ observations of these quantities for directly comparable air masses. These results demonstrate good understanding of the budget of stratospheric chlorine and that the partitioning of inorganic chlorine is accurately described by photochemical models that employ JPL97 reaction rates and production of HCl from ClO + OH for the environmental conditions encountered: relatively warm temperatures, long periods of solar illumination, and relatively low aerosol surface areas.

Sen, B.↗