Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Variational approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A summary of spectral synthesis procedures for multivariable systems

A new approach to the eigensystem assignment problem is presented. The approach utilizes a null-space formulation of the eigenvalue/eigenvector assignment problem to simultaneously realize arbitrary eigenvalue specifications, approximate desired modal behavior, and achieve low eigensystem sensitivity with respect to plant parameter variations. The methods are applied to the design of regulator and integral plus proportional servo control systems.

Liberty, S. R.↗
NASA NTRS1981

Effect of long-term intensity variations on pulsar searches and the pulsar luminosity function

Long-term intensity data for five pulsars are used to obtain the probability density distribution of intensities for each pulsar, and it is found that they are described satisfactorily by chi-squared distributions. Based on these distributions, the number of new pulsars expected to be found on repeatedly searching the same region of the sky with the same sensitivity is given. Nearly 25 percent more new pulsars are expected to be found on the first repeat search. It is also shown that the luminosity function deduced from either a single survey or surveys with very different sensitivities is not affected by the omission of flux density variations in the calculation of selection effects. Finally, a method is proposed for deriving the luminosity function by combining the different searches of a given area on the basis of a probabilistic approach to the evaluation of selection effects.

Krishnamohan, S.↗
NASA NTRS1982

Crop weather models of barley and spring wheat yield for agrophysical units in North Dakota

Models based on multiple regression were developed to estimate barley yield and spring wheat yield from weather data for Agrophysical units(APU) in North Dakota. The predictor variables are derived from monthly average temperature and monthly total precipitation data at meteorological stations in the cooperative network. The models are similar in form to the previous models developed for Crop Reporting Districts (CRD). The trends and derived variables were the same and the approach to select the significant predictors was similar to that used in developing the CRD models. The APU models show sight improvements in some of the statistics of the models, e.g., explained variation. These models are to be independently evaluated and compared to the previously evaluated CRD models. The comparison will indicate the preferred model area for this application, i.e., APU or CRD.

Leduc, S.↗
NASA NTRS1982

A wave envelope finite element scheme for acoustical radiation

The aeroacoustic problem associated with the radiation of fan noise from the inlet of a turbofan aircraft engine, the dimensions of which are generally many times larger than the acoustical wavelengths of the major energy-carrying frequencies, is considered. In the present approach, a conventional finite element solution in the inner region is compatibly matched to a 'wave envelope' finite element solution in a large but finite outer region. The inclusion of a wavelike variation with the correct asymptotic decay in the shape functions for the outer region preserves the correct behavior of the solution at large distances. The method is initially presented for a simple one-dimensional model based on the solution of Webster's horn equation. Results are presented for the specific case of a uniform cylindrical section joined to a conical expansion, and also for a simple axisymmetric test case of the calculation of acoustical pressure generated by a vibrating circular piston located at the center of an infinite rigid baffle.

Astley, R. J.↗
NASA NTRS1989

Automated model formulation for time-varying flexible structures

Presented here is an identification technique that uses the sensor information to choose a new model out of a finite set of discrete model space, in order to follow the observed changes to the given time varying flexible structure. Boundary condition sets or other information on model variations are used to organize the set of possible models laterally into a search tree with levels of abstraction used to order the models vertically within branches. An object-oriented programming approach is used to represent the model set in the search tree. A modified A (asterisk) best first search algorithm finds the model where the model response best matches the current observations. Several extensions to this methodology are discussed. Methods of possible integration of rules with the current search algorithm are considered to give weight to interpreted trends that may be found in a series of observations. This capability might lead, for instance, to identifying a model that incorporates a progressive damage rather than with incorrect paramenters such as added mass. Another new direction is to consider the use of noisy time domain sensor feedback rather than frequency domain information in the search algorithm to improve the real-time capability of the developed procedure.

Glass, B. J.↗
NASA NTRS1989

Longitudinal stability and control characteristics of the Quiet Short-Haul Research Aircraft (QSRA)

Flight experiments were conducted to evaluate various aerodynamic characteristics of the Quiet Short-Haul Research Aircraft (QSRA), an experimental aircraft that makes use of the upper-surface blown (USB) powered-lift concept. Time-history records from maneuvers performed with the aircraft in landing-approach and take-off configurations (with its stability augmentation system disengaged) were analyzed to obtain longitudinal stability and control derivatives and performance characteristics. The experiments included measuring the aircraft responses to variations in the deflection of direct-lift control spoilers and to thrust variations as well as to elevator inputs. The majority of the results are given for the aircraft in a landing configuration with the USB flaps at 50 degrees. For this configuration, if the static longitudinal stability is defined as the variation of the pitching-moment coefficient with the lift coefficient at a constant thrust coefficient, this stability decreases significantly with increasing angle of attack above 9 degrees. For this configuration, at small and negative angles of attack and high levels of thrust, the elevators and the horizontal stabilizer lost effectiveness owing to incipent stalling, but this occurred only during unsteady maneuvers and for brief time intervals.

Stephenson, Jack D.↗
NASA NTRS1990

An experimental study of counter-rotating cores in elliptical galaxies

Recent observational studies (Franx and Illingworth 1987; Jedrzejewski and Schechter 1988; Bender 1988; Illingworth and Franx 1989) have shown that some elliptical galaxies have a small region near the center that rotates in the opposite direction from the outer parts of the galaxy. Often the rotation in the central part is much faster than that in the outer part. A few other galaxies show a small region near the center that rotates in the same direction as the rest of the galaxy, but much faster. Either way, the part near the center that shows a strange pattern of rotation (the 'core') has been interpreted as a distinct dynamical subsystem. Very briefly, the observational data seem to be that anomalies show up in rotation curves near the centers of some elliptical galaxies and that galaxies with these strange rotational properties do not show a photometric signature: there are no noticeable bumps in the brightness profile and no unusual shapes of isophotal contours that would suggest an excess of matter concentrated near the center. No strong color variations have been reported. The puzzle is to learn what we can about elliptical galaxies in general, and about galaxies with strange central regions in particular, from these observational facts. The authors' approach is experimental. They make a guess about the form of the dynamically distinct subsystem, and then build a galaxy model to test experimental consequences such as the amount of matter required to produce observable effects and the length of time over which these effects would remain observable. They sidestep questions about how the galaxy might have gotten to be that way in the first place. That gives them more freedom to explore a variety of suggestions about what kind of dynamical system might give rise to the observed rotational patterns.

Miller, R. H.↗
NASA NTRS1960

Experimental and Theoretical Study of a Rectangular Wing in a Vortical Wake at Low Speed

A systematic study has been made, experimentally and theoretically, of the effects of a vortical wake on the aerodynamic characteristics of a rectangular wing at subsonic speed. The vortex generator and wing were mounted on a reflection plane to avoid body-wing interference. Vortex position, relative to the wing, was varied both in the spanwise direction and normal to the wing. Angle of attack of the wing was varied from -40 to +60. Both chordwise and spanwise pressure distributions were obtained with the wing in uniform and vortical flow fields. Stream surveys were made to determine the flow characteristics in the vortical wake. The vortex-induced lift was calculated by several theoretical methods including strip theory, reverse-flow theory, and reverse-flow theory including a finite vortex core. In addition, the Prandtl lifting-line theory and the Weissinger theory were used to calculate the spanwise distribution of vortex-induced loads. With reverse-flow theory, predictions of the interference lift were generally good, and with Weissinger's theory the agreement between the theoretical spanwise variation of induced load and the experimental variation was good. Results of the stream survey show that the vortex generated by a lifting surface of rectangular plan form tends to trail back streamwise from the tip and does not approach the theoretical location, or centroid of circulation, given by theory. This discrepancy introduced errors in the prediction of vortex interference, especially when the vortex core passed immediately outboard of the wing tip. The wake produced by the vortex generator in these tests was not fully rolled up into a circular vortex, and so lacked symmetry in the vertical direction of the transverse plane. It was found that the direction of circulation affected the induced loads on the wing either when the wing was at angle of attack or when the vortex was some distance away from the plane of the wing.

Smith, Willard G.↗
NASA NTRS1999

Characterization of In-Situ BN Interface Formed by Nitridation of Nextel 312

Treatment of Nextel (TM) 312 in a reactive environment has been used as a low cost approach to the formation of BN on the fiber surface. Although the BN enriched surface region is extremely thin (less than 40 run), it is effective in providing debonding and composite behavior. Variation in mechanical behavior of Nextel (TM) 312/BN/Blackglas (TM) composites has been noted among panels fabricated with AF-10 cloth treated in different nitridation runs, Understanding this variation became the rationale for undertaking a detailed characterization of the nitrided fiber using field emission scanning electron microscopy, low voltage energy dispersive x-ray and Auger electron spectroscopy. Chemical composition and surface morphology are discussed in relation to observed mechanical behavior of NeXtel (TM) 312/Blackglas (TM) composites tested in bending.

Hurwitz, Fances I.↗
NASA NTRS1995

The NASA Ames 16-Inch Shock Tunnel Nozzle Simulations and Experimental Comparison

The 16-Inch Shock Tunnel at NASA Ames Research Center is a unique test facility used for hypersonic propulsion testing. To provide information necessary to understand the hypersonic testing of the combustor model, computational simulations of the facility nozzle were performed and results are compared with available experimental data, namely static pressure along the nozzle walls and pitot pressure at the exit of the nozzle section. Both quasi-one-dimensional and axisymmetric approaches were used to study the numerous modeling issues involved. The facility nozzle flow was examined for three hypersonic test conditions, and the computational results are presented in detail. The effects of variations in reservoir conditions, boundary layer growth, and parameters of numerical modeling are explored.

TokarcikPolsky, S.↗
NASA NTRS2012

Nonlinear Analysis of Bonded Composite Tubular Lap Joints

The present study describes a semi-analytical solution method for predicting the geometrically nonlinear response of a bonded composite tubular single-lap joint subjected to general loading conditions. The transverse shear and normal stresses in the adhesive as well as membrane stress resultants and bending moments in the adherends are determined using this method. The method utilizes the principle of virtual work in conjunction with nonlinear thin-shell theory to model the adherends and a cylindrical shear lag model to represent the kinematics of the thin adhesive layer between the adherends. The kinematic boundary conditions are imposed by employing the Lagrange multiplier method. In the solution procedure, the displacement components for the tubular joint are approximated in terms of non-periodic and periodic B-Spline functions in the longitudinal and circumferential directions, respectively. The approach presented herein represents a rapid-solution alternative to the finite element method. The solution method was validated by comparison against a previously considered tubular single-lap joint. The steep variation of both peeling and shearing stresses near the adhesive edges was successfully captured. The applicability of the present method was also demonstrated by considering tubular bonded lap-joints subjected to pure bending and torsion.

E. Oterkus↗
NASA NTRS2011

Research Of Airborne Precision Spacing to Improve Airport Arrival Operations

In September 2004, the European Organization for the Safety of Air Navigation (EUROCONTROL) and the United States Federal Aviation Administration (FAA) signed a Memorandum of Cooperation to mutually develop, modify, test, and evaluate systems, procedures, facilities, and devices to meet the need for safe and efficient air navigation and air traffic control in the future. In the United States and Europe, these efforts are defined within the architectures of the Next Generation Air Transportation System (NextGen) Program and Single European Sky Air Traffic Management Research (SESAR) Program respectively. Both programs have identified Airborne Spacing as a critical component, with Automatic Dependent Surveillance Broadcast (ADS-B) as a key enabler. Increased interest in reducing airport community noise and the escalating cost of aviation fuel has led to the use of Continuous Descent Arrival (CDA) procedures to reduce noise, emissions, and fuel usage compared to current procedures. To provide these operational enhancements, arrival flight paths into terminal areas are planned around continuous vertical descents that are closer to an optimum trajectory than those in use today. The profiles are designed to be near-idle descents from cruise altitude to the Final Approach Fix (FAF) and are typically without any level segments. By staying higher and faster than conventional arrivals, CDAs also save flight time for the aircraft operator. The drawback is that the variation of optimized trajectories for different types and weights of aircraft requires the Air Traffic Controller to provide more airspace around an aircraft on a CDA than on a conventional arrival procedure. This additional space decreases the throughput rate of the destination airport. Airborne self-spacing concepts have been developed to increase the throughput at high-demand airports by managing the inter-arrival spacing to be more precise and consistent using on-board guidance. It has been proposed that the additional space needed around an aircraft performing a CDA could be reduced or eliminated when using airborne spacing techniques.

Barmore, Bryan E.↗
NASA NTRS2010

Quantitative Measures of Immersion in Cloud and the Biogeography of Cloud Forests

Sites described as tropical montane cloud forests differ greatly, in part because observers tend to differ in their opinion as to what constitutes frequent and prolonged immersion in cloud. This definitional difficulty interferes with hydrologic analyses, assessments of environmental impacts on ecosystems, and biogeographical analyses of cloud forest communities and species. Quantitative measurements of cloud immersion can be obtained on site, but the observations are necessarily spatially limited, although well-placed observers can examine 10 50 km of a mountain range under rainless conditions. Regional analyses, however, require observations at a broader scale. This chapter discusses remote sensing and modeling approaches that can provide quantitative measures of the spatiotemporal patterns of cloud cover and cloud immersion in tropical mountain ranges. These approaches integrate remote sensing tools of various spatial resolutions and frequencies of observation, digital elevation models, regional atmospheric models, and ground-based observations to provide measures of cloud cover, cloud base height, and the intersection of cloud and terrain. This combined approach was applied to the Monteverde region of northern Costa Rica to illustrate how the proportion of time the forest is immersed in cloud may vary spatially and temporally. The observed spatial variation was largely due to patterns of airflow over the mountains. The temporal variation reflected the diurnal rise and fall of the orographic cloud base, which was influenced in turn by synoptic weather conditions, the seasonal movement of the Intertropical Convergence Zone and the north-easterly trade winds. Knowledge of the proportion of the time that sites are immersed in clouds should facilitate ecological comparisons and biogeographical analyses, as well as land use planning and hydrologic assessments in areas where intensive on-site work is not feasible.

Lawton, R. O.↗
NASA NTRS2011

Climate Forcing Reconstructions for Use in PMIP Simulations of the Last Millennium (v1.0)

Simulations of climate over the Last Millennium (850-1850 CE) have been incorporated into the third phase of the Paleoclimate Modelling Intercomparison Project (PMIP3). The drivers of climate over this period are chiefly orbital, solar, volcanic, changes in land use/land cover and some variation in greenhouse gas levels. While some of these effects can be easily defined, the reconstructions of solar, volcanic and land use-related forcing are more uncertain. We describe here the approach taken in defining the scenarios used in PMIP3, document the forcing reconstructions and discuss likely implications.

volcanoes↗
NASA NTRS2020

Determination of the Complex Refractive Indices of Aerosol Analogs Formed at Low Temperatures with the NASA Ames Optical Constants Facility (OCF)

The NASA Ames COsmic SImulation Chamber (COSmIC) [1] is a unique experimental facility that allows: 1) cooling a gas mixture to low temperature (150 K) in a jet expansion before inducing chemistry by plasma; and 2) controlling the extent of the chemical reactions by employing a pulsed plasma discharge. This enables the study of the early stages of aerosol production, as well as specific chemical pathways in planetary environments (e.g. Titan’s and Pluto’s atmospheres). Both the gas and solid products can be studied. For a decade COSmIC has been used to simulate Titan’s atmospheric chemistry at low, Titan-like temperature [2]. New developments on the COSmIC facility are investigating formation of aerosols in tenuous, or transitory, atmospheres of other icy bodies [3-5], as well as cool exoplanets atmospheres having a hydrocarbon component, that results in formation of hazes and/or surface deposits of refractory materials. The new Ames Optical Constants Facility enables determination of the aerosol analogs' complex refractive indices, n and k, from 0.59 to 200 μm [2]. Here we report efforts of determining n and k from ex-situ transmission measurements of solid samples produced from binary N-CH and Ar-CH, and tertiary N-CH-CH and Ar-CH-CHgas mixtures in COSmIC, and deposited onto various substrates. A computational technique [6] that addresses interference fringes observed in the laboratory transmission data, particularly at wavelengths < 3 μm, has been implemented and applied to determine n and k for the samples. At visible and near-infrared wavelengths(0.4-1.6 μm) the deposit thickness, and its variation, as well as n and k were determined by a commercial entity. These data provide the ability to compare results, from independent methods, in the region of overlap between the two approaches.

Ella M Sciamma-O'Brien↗
NASA NTRSDate not supplied

Contact Multigraph Routing: Overview and Implementation

In Delay Tolerant Networking (DTN), the standard routing algorithm used to navigate time-varying networks has been Contact Graph Routing (CGR). In CGR, a globally distributed list of contacts, periods during which two DTN nodes may communicate, is used to construct a contact graph, in which contacts are vertices. A version of Dijkstra’s algorithm can then be used to find paths through this model of the timevarying network. However, since contact graphs may be large compared to the network, potentially growing with the square of the number of network nodes and linearly with the time interval represented, the resulting algorithm does not scale well with the size of the network or time. Any improvement to the routing algorithm will bring significant returns to scale. In a previous paper, we briefly introduced an alternative to the contact graph model for routing. This alternative model is based on a multigraph (a graph in which there may be multiple edges between a pair of vertices) where vertices represent network nodes instead of contacts. A version of Dijkstra’s algorithm in these multigraph models reduces the time needed to perform the same routing computations done in the existing CGR algorithm. Moreover, a modified version of Yen’s algorithm for multigraphs is included. Our variation of CGR, which we call Contact Multigraph Routing (CMR), provides an in-line replacement for the previously used pathfinding algorithms. This paper describes an implementation created based on the CMR approach, and experimental comparisons to traditional CGR are given. In addition, we explore some additional modifications to the routing pipeline traditionally assumed in CGR. These modifications range from the theoretical to the practical in terms of size and scope. We step forward our understanding of sheaftheoretic networking and describe how to model the routing pipeline using sheaves. We detail some enhanced route selection criteria that addresses some of the added complexity of DTNbased systems. We also include a future works section on future improvements and implementations that would be of service to the broader DTN community.

contact graph routing↗
NASA NTRSDate not supplied

Multiscale Modeling of Fracture Strength in Fibrous Thermal Protection System Materials

This work presents a multiscale modeling approach to predict the fracture strength of fibrous Thermal Protection System (TPS) materials. The model assumes that system failure is initiated at the joints between individual fibers. We investigated three distinct TPS compositions: amorphous silica, alumina and aluminosilicate fibers. Molecular dynamics (MD) simulations were employed to determine the fracture strength values of these fiber joints for both material systems. These fracture strength values were then integrated into simulations of 3D randomly populated fiber structures, where tensile load transfer occurs through the fiber joints. These microscale properties are upscaled through a renormalization approach [1] to predict macroscale tensile strength of 3D random fiber networks, accounting for joint-dominated failure and effective load-bearing area. The study concludes by demonstrating the resulting strength variation as a function of material composition, fiber density, and morphology. We also show validation of results by comparing them against explicit fiber finite element (FE) modeling [2] where fiber joint fracture is represented by cohesive elements.

Jaehyun Cho↗
NASA NTRSDate not supplied

Kalman Filtering and RTS Smoothing for Arc-Jet Sample Edge Tracking

Accurate and temporally consistent measurements of test-article recession are required to characterize material response during arc-jet ablation experiments. However, image-based boundary measurements are often affected by segmentation noise, brightness variations, and frame-to-frame variability. This work extends arcjetCV [1] with filtering methods for tracking the evolving boundaries of hemispherical and ISO-Q test articles. Two boundary-tracking approaches based on Kalman filtering [2] were implemented. The first applies a point-wise Kalman filter followed by a Rauch–Tung–Striebel smoother [3] to individual boundary-point locations. The second applies the same filtering and smoothing framework to a reduced set of geometry-dependent shape parameters. The point-wise method reduces local frame-to-frame fluctuations while preserving spatial details along the detected boundary. The shape-parameter method provides a compact and geometrically constrained estimate of the sample contour. Figure 1 illustrates the two approaches for a hemispherical test article. Both methods improve temporal consistency and support more robust estimation of surface recession from arc-jet imagery. The two filtering approaches provide complementary representations of boundary evolution and improve the reliability of image-based recession measurements during arc-jet experiments.

recession measurement↗